A sandwich sensor based on imprinted polymers and aptamers for highly specific double recognition of viruses

Molecularly imprinted polymer-coated silica microbeads for high-performance liquid chromatography

Molecularly imprinted polymer (MIP)-based chromatographic separation materials, owing to their advantages of unique selectivity, low cost, suitable reproducibility, and acceptable stability, have attracted a great deal of research in different fields. In this investigation, a new type of MIP-coated silica (MIP/SiO2) separation material was developed using sulfamethoxazole as a template; the specific recognition ability of MIP and appropriate physicochemical properties (abundant Si-OH, suitable pore structure, good stability, etc.) of SiO2 microbeads were combined. The MIP/SiO2 separation materials were characterized carefully. Then, various compounds (such as sulfonamides, ginsenosides, nucleosides, and several pesticides) were used to comprehensively evaluate the chromatographic performances of the MIP/SiO2 column. Furthermore, the chromatographic performances of the MIP/SiO2 column were compared with those of other separation materials (such as non-imprinted polymer-coated silica, C18/SiO2, and bare silica) packed columns. The resolution value of all measured compounds was more than 1.51. The column efficiencies of 13 510 plates per meter (N m-1) for sulfamethoxazole, 11 600 N m-1 for ginsenoside Rd, and 10 510 N m-1 for 2'-deoxyadenosine were obtained. The acceptable results verified that the MIP/SiO2 column can be applied to separate highly polar drugs such as sulfonamides, ginsenosides, nucleosides, and pesticides.

Research progress on preparation methods and sensing applications of molecularly imprinted polymer-aptamer dual recognition elements

The aptamer (Apt) and the molecularly imprinted polymer (MIP), as effective substitutes for antibodies, have received widespread attention from researchers because of their creation. However, the low stability of Apt in harsh detection environment and the poor specificity of MIP have hindered their development. Therefore, some researchers have attempted to combine MIP with Apt to explore whether the effect of "1 + 1 > 2" can be achieved. Since its first report in 2013, MIP-Apt dual recognition elements have become a highly focused research direction in the fields of biology and chemistry. MIP-Apt dual recognition elements not only possess the high specificity of Apt and the high stability of MIP in harsh detection environment, but also have high sensitivity and affinity. They have been successfully applied in medical diagnosis, food safety, and environmental monitoring fields. This article provides a systematic overview of three preparation methods for MIP-Apt dual recognition elements and their application in eight different types of sensors. It also provides effective insights into the problems and development directions faced by MIP-Apt dual recognition elements.

MIP-based immunoassays: A critical review

Molecularly imprinted polymers, MIPs, are man-made receptors mimicking the thermodynamic and kinetic binding behaviour of natural antibodies. Therefore, it is not surprising that many researchers have thought about MIPs as artificial receptors in immunoassay-like analytical applications, where the general machinery of the assay is maintained, but the molecular recognition is no longer assured by an antibody but by an artificial receptor. However, the number of papers devoted explicitly to applications of MIPs in the immunoassay field is quite limited if compared to the huge number of papers covering the multifaceted molecular imprinting technology. For this reason, this critical review wants to give a general view of MIP-based immunoassays, trying to highlight the critical points that have so far prevented a wider application of molecular imprinting technology in the immunoassay field and, possibly, try to suggest strategies to overcome them.

Molecular imprinted electrochemical sensor for ovalbumin detection based on boronate affinity and signal amplification approach

Ovalbumin (OVA), a class of glycoproteins, is the main allergen in hen egg white that often causes allergies in humans, especially in babies. Therefore, it is pivotal to be able to detect and separate OVA. This work presents an ingenious sandwich-structured magnetic molecular imprinted electrochemical sensor for OVA detection by utilizing boronate affinity and signal amplification strategy. With anti-OVA antibody-modified gold nanoparticles (AuNPs) as amplifiers, the imprinted cavities in the probe could capture protein to form a sandwich structure. Due to its specific recognition of antibody and molecular imprinted polymers and the signal amplification of AuNPs, the sensor had good selectivity and sensitivity toward OVA and a low detection limit of 3.0 fg/mL. The sensor also had excellent stability and could satisfactorily detect OVA in real red wine samples.

Construction of an Ultrasensitive Molecularly Imprinted Virus Sensor Based on an "Explosive" Secondary Amplification Strategy for the Visual Detection of Viruses

Viral outbreaks have caused great disruptions to the economy and public health in recent years. The accurate detection of viruses is a key factor in controlling and overcoming epidemics. In this study, an ultrasensitive molecularly imprinted virus sensor was developed based on an "explosive" secondary amplification strategy. Magnetic particles coated with carbon quantum dots (Fe₃O₄@CDs) were used as carriers and fluorescent probes, while aptamers were introduced into the imprinting layer to enhance the specific recognition of the target virus enterovirus 71 (EV71). When EV71 was captured by the imprinted particles, the fluorescence of the CDs was quenched, especially after binding to the aptamer-modified ZIF-8 loaded with a large amount of phenolphthalein, thereby resulting in signal amplification. Then, when adjusting the pH of the solution to 12, the decomposition of ZIF-8 released phenolphthalein, which turned the solution red, leading to the second "explosive" amplification of the signal. Therefore, the detection of EV71 with ultrasensitivity was achieved, which allows for visual detection by the naked eye in the absence of any instruments. The detection limits for fluorescence and visualization detection were 8.33 fM and 2.08 pM, respectively. In addition, a satisfactory imprinting factor of 5.4 was achieved, and the detection time only needed 20 min. It is expected that this fluorescence-colorimetric dual-mode virus molecularly imprinted sensor will show excellent prospects in epidemic prevention and rapid clinical diagnosis.

Molecularly Imprinting–Aptamer Techniques and Their Applications in Molecular Recognition

Molecular imprinting–aptamer techniques exhibit the advantages of molecular imprinting and aptamer technology. Hybrids of molecularly imprinted polymer–aptamer (MIP–aptamer) prepared by this technique have higher stability, binding affinity and superior selectivity than conventional molecularly imprinted polymers or aptamers. In recent years, molecular imprinting–aptamer technologies have attracted considerable interest for the selective recognition of target molecules in complex sample matrices and have been used in molecular recognition such as antibiotics, proteins, viruses and pesticides. This review introduced the development of molecular imprinting–aptamer-combining technologies and summarized the mechanism of MIP–aptamer formation. Meanwhile, we discussed the challenges in preparing MIP–aptamer. Finally, we summarized the application of MIP–aptamer to the molecular recognition in disease diagnosis, environmental analysis, food safety and other fields.

Nanomaterials for virus sensing and tracking

The effect of the on-going COVID-19 pandemic on global healthcare systems has underlined the importance of timely and cost-effective point-of-care diagnosis of viruses. The need for ultrasensitive easy-to-use platforms has culminated in an increased interest for rapid response equipment-free alternatives to conventional diagnostic methods such as polymerase chain reaction, western-blot assay, etc. Furthermore, the poor stability and the bleaching behavior of several contemporary fluorescent reporters is a major obstacle in understanding the mechanism of viral infection thus retarding drug screening and development. Owing to their extraordinary surface-to-volume ratio as well as their quantum confinement and charge transfer properties, nanomaterials are desirable additives to sensing and imaging systems to amplify their signal response as well as temporal resolution. Their large surface area promotes biomolecular integration as well as efficacious signal transduction. Due to their hole mobility, photostability, resistance to photobleaching, and intense brightness, nanomaterials have a considerable edge over organic dyes for single virus tracking. This paper reviews the state-of-the-art of combining carbon-allotrope, inorganic and organic-based nanomaterials with virus sensing and tracking methods, starting with the impact of human pathogenic viruses on the society. We address how different nanomaterials can be used in various virus sensing platforms (e.g. lab-on-a-chip, paper, and smartphone-based point-of-care systems) as well as in virus tracking applications. We discuss the enormous potential for the use of nanomaterials as simple, versatile, and affordable tools for detecting and tracing viruses infectious to humans, animals, plants as well as bacteria. We present latest examples in this direction by emphasizing major advantages and limitations.

Customizable molecular recognition: advancements in design, synthesis, and application of molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are unlocking the door to synthetic materials that are capable of molecular recognition.

(INVITED)Quantitative detection of SARS-CoV-2 virions in aqueous mediums by IoT optical fiber sensors

The COVID-19 pandemic has emphasized the need for portable, small-size, low-cost, simple to use, and highly sensitive sensors able to measure a specific substance, with the capability of the transmission over the Internet of statistical data, such as in this specific case on the spread of the SARS-CoV-2 virions. Moreover, to resolve the COVID-19 emergency, the possibility of making selective SARS-CoV-2 measurements in different aqueous matrices could be advantageous. Thus, the realization of rapid and innovative point-of-care diagnostics tests has become a global priority. In response to the current need for quick, highly sensitive and on-site detection of the SARS-CoV-2 virions in different aqueous solutions, two different nanolayer biorecognition systems separately combined with an adaptable optical fiber sensor have been reported in this work. More specifically, two SARS-CoV-2 sensors have been developed and tested by exploiting a plasmonic plastic optical fiber (POF) sensor coupled with two different receptors, both designed for the specific recognition of the SARS-CoV-2 Spike protein; one is aptamer-based and the other one Molecular Imprinted Polymer-based. The preliminary tests on SARS-CoV-2 virions, performed on samples of nasopharyngeal (NP) swabs in universal transport medium (UTM), were compared with data obtained using reverse-transcription polymerase chain reaction (RT-PCR). According to these preliminary experimental results obtained exploiting both receptors, the sensitivity of the proposed SARS-CoV-2 optical fiber sensors proved to be high enough to detect virions. Furthermore, a relatively fast response time (a few minutes) to detect virions was obtained without additional reagents, with the capability to transmit the data via the Internet automatically.