Crystalline assembly of metal-organic polyhedra driven by ionic interactions with polyoxometalates

Water-Soluble Ionic Metal-Organic Polyhedra as a Versatile Platform for Enzyme Bio-immobilization

Metal-organic polyhedra (MOPs) can act as elementary structural units for the design of modular porous materials; however, their association with biological systems remains greatly restricted by their typically low stabilities and solubilities in water. Herein, we describe the preparation of novel MOPs bearing either anionic or cationic groups and exhibiting a high affinity for proteins. Simple mixing of the protein bovine serum albumin (BSA) and ionic MOP aqueous solutions resulted in the spontaneous formation of MOP-protein assemblies, in a colloidal state or as solid precipitates depending on the initial mixing ratio. The versatility of the method was further illustrated using two enzymes, catalase and cytochrome c, with different sizes and isoelectric points (pI's) below and above 7. This mode of assembly led to the high retention of catalytic activity and enabled recyclability. Furthermore, the co-immobilization of cytochrome c with highly charged MOPs resulted in a substantial 44-fold increase of its catalytic activity.

Porous Salts as Platforms for Heterogeneous Catalysis

The preparation of a new class of reactive porous solids, prepared via straightforward salt metathesis reactions, is described here. Reaction of the dimethylammonium salt of a magnesium-based porous coordination cage with the chloride salt of [Cr^II Cl(Me₄ cyclam)]⁺ affords a porous solid with concomitant removal of dimethylammonium chloride. The salt consists of the ions combined in the expected ratio based on their charge as confirmed by UV-vis and X-ray photoelectron spectroscopies, ion chromatography (IC), and inductively coupled plasma mass spectrometry (ICP-MS). The porous salt boasts a Brunauer-Emmett-Teller (BET) surface area of 213 m²  g^-1 . Single crystal X-ray diffraction reveals the chromium(II) cations in the structure reside in the interstitial space between porous cages. Importantly, the chromium(II) centers, previously shown to react with O₂ to afford reactive chromium(III)-superoxide adducts, are still accessible in the solid state as confirmed by UV-vis spectroscopy. The site-isolated reactive centers have competence toward hydrogen atom abstraction chemistry and display significantly increased stability and reactivity as compared to dissolved ions.

Anion Binding as a Strategy for the Synthesis of Porous Salts

Porous salts have recently emerged as a promising new class of ultratunable permanently microporous solids. These adsorbents, which were first reported as ionic solids based on porous cations and anions, can be isolated from a wide variety of charged, permanently porous coordination cages. A challenge in realizing the full tunability of such systems, however, lies in the fact that the majority of coordination cages for which surface areas have been reported are comprised of charge-balanced inorganic and organic building blocks that result in neutral cages. As such, most reported permanently porous coordination cages cannot be used as reagents in the synthesis of porous salts. Here, we show that the facile reaction of TBAX (TBA⁺ = tetra-n-butylammonium; X = F^- and Cl^-) with molybdenum paddlewheel-based coordination cages of the M₄L₄ and M₂₄L₂₄ lantern and cuboctahedra structure types, respectively, affords charged cages by virtue of coordination of halide anions to the internal and/or external metal sites on these structures, as confirmed by single-crystal X-ray diffraction, X-ray photoelectron spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. At a practical level, the TBAX/cage reactions, which are fully reversible upon isolation of the cage with the appropriate solvent, solubilize otherwise rigorously insoluble cages. This method significantly increases the solution processability of these highly porous solids. Toward the formation of new porous salts, halide binding also serves to incorporate charge on neutral cages and make them amenable to simple salt metathesis reactions to afford new porous salts based on anions and cations with intrinsic porosity. A combination of diffraction methods and a suite of spectroscopic tools confirms speciation of the isolated solids, which represent a new class of highly tunable porous salts. Ultimately, this work represents a roadmap for the preparation of new porous solids and showcases the utility and broad applicability of anion binding as a strategy for the synthesis of porous salts.

Zirconium Metal-Organic Cages: Synthesis and Applications

ConspectusFor the last two decades, materials scientists have contributed to a growing library of porous crystalline materials. These synthetic materials are typically extended networks, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), or discrete materials like metal-organic cages (MOCs) and porous organic cages (POCs). Advanced porous materials have shown promise for various applications due to their modular nature and structural tunability. MOCs have recently garnered attention because of their molecularity that bestows them with many unique possibilities (e.g., solution-processability, structural diversity, and postsynthetic processability).MOCs are discrete molecular assemblies of organic ligands coordinated with either metal cations or metal oxide clusters of different nuclearities, resulting in architectures with inherent porosity. Notably, the molecular nature of MOCs endows them with easy solution-processability unattainable with traditional framework materials. To date, a number of stable MOCs have been reported, such as those based on Rh (Rh-O bond energy: 405 ± 42 kJ/mol), Fe (Fe-O bond energy: 407.0 ± 1.0 kJ/mol), Cr (Cr-O bond energy: 461 ± 8.7 kJ/mol), Ti (Ti-O bond energy: 666.5 ± 5.6 kJ/mol), and Zr (Zr-O bond energy: 766.1 ± 10.6 kJ/mol). Paddle-wheel MOCs have also shown great stability in aqueous environments due to their rigid backbones. The zirconium MOC (Zr-MOCs) family emerges as a class of very robust cages for which their high bond energy endows them with high hydrothermal stability.In 2013, we reported the first four zirconocene tetrahedrons assembled from trinuclear zirconium oxide clusters with ditopic or tritopic organic ligands. Since then, significant progress in the rational design of Zr-MOC has led to an assortment of structures dedicated to meaningful applications.In this Account, we highlight the recent progress in synthesizing Zr-MOCs and Zr-MOC-based higher dimensional frameworks and their applications dedicated in our laboratories and beyond. The general Zr-MOC synthetic strategy involves assembling Zr trinuclear clusters with organic ligands (rigid or flexible) containing various functional groups. This chemistry has afforded cages with structural versatility and active sites, e.g., amino groups, for postsynthetic modifications (PSMs). Since the extrinsic porosity of cage-based frameworks is relatively weak, the resulting frameworks are susceptible to structural rearrangement after solvent removal. To circumvent this limitation, increasing the hydrogen bond ratio and strength between interlinked cages and conducting in situ catalytic polymerizations have been reported to afford permanently porous structures amenable to host-guest reactions.To expand their potential applications, multifunctional Zr-MOCs are highly desired. Such multivariate MOCs can be attained by either employing the isoreticular expansion strategy to create MOCs with high surface areas or using mixed-ligand approaches to afford heterogeneous MOCs. In addition, amorphous MOCs, flexible organic ligands, new functionalities, and MOC-based extended networks are exciting new approaches to developing materials with structural versatility and enhanced characteristics. Thereby, we believe the stability and versatility of the Zr-MOC family hold great potential in expanding and addressing challenging applications.

Control of Extrinsic Porosities in Linked Metal-Organic Polyhedra Gels by Imparting Coordination-Driven Self-Assembly with Electrostatic Repulsion

The linkage of metal-organic polyhedra (MOPs) to synthesize porous soft materials is one of the promising strategies to combine processability with permanent porosity. Compared to the defined internal cavity of MOPs, it is still difficult to control the extrinsic porosities generated between crosslinked MOPs because of their random arrangements in the networks. Herein, we report a method to form linked MOP gels with controllable extrinsic porosities by introducing negative charges on the surface of MOPs that facilitates electrostatic repulsion between them. A hydrophilic rhodium-based cuboctahedral MOP (OHRhMOP) with 24 hydroxyl groups on its outer periphery can be controllably deprotonated to impart the MOP with tunable electrostatic repulsion in solution. This electrostatic repulsion between MOPs stabilizes the kinetically trapped state, in which an MOP is coordinated with various bisimidazole linkers in a monodentate fashion at a controllable linker/MOP ratio. Heating of the kinetically trapped molecules leads to the formation of gels with similar colloidal networks but different extrinsic porosities. This strategy allows us to design the molecular-level networks and the resulting porosities even in the amorphous state.

Assembling metal-organic cages as porous materials

There is growing interest in metal-organic cages (MOCs) as porous materials owing to their processability in solution. The discrete molecular character and surface features of MOCs have a direct impact on the interactions between cages, enabling the final physical state of the materials to be tuned. In this tutorial review, we discuss how to use MOCs as core building units, highlighting the role played by surface functionalisation of MOCs in leading to porous materials in a range of states covering crystalline solids, soft matter, liquids and composites. We finish by providing an outlook on the opportunities for this work to serve as a foundation for the development of increasingly complex functional porous materials structured over various length scales.

Post-synthetic modifications of metal–organic cages

Metal-organic cages (MOCs) are discrete, supramolecular entities that consist of metal nodes and organic linkers, which can offer solution processability and high porosity. Thereby, their predesigned structures can undergo post-synthetic modifications (PSMs) to introduce new functional groups and properties by modifying the linker, metal node, pore or surface environment. This Review explores current PSM strategies used for MOCs, including covalent, coordination and noncovalent methods. The effects of newly introduced functional groups or generated complexes upon the PSMs of MOCs are also detailed, such as improving structural stability or endowing desired functionalities. The development of the aforementioned design principles has enabled systematic approaches for the development and characterization of families of MOCs and, thereby, provides insight into structure-function relationships that will guide future developments.

Metal-Organic Polyhedra as Building Blocks for Porous Extended Networks

Metal-organic polyhedra (MOPs) are a subclass of coordination cages that can adsorb and host species in solution and are permanently porous in solid-state. These characteristics, together with the recent development of their orthogonal surface chemistry and the assembly of more stable cages, have awakened the latent potential of MOPs to be used as building blocks for the synthesis of extended porous networks. This review article focuses on exploring the key developments that make the extension of MOPs possible, highlighting the most remarkable examples of MOP-based soft materials and crystalline extended frameworks. Finally, the article ventures to offer future perspectives on the exploitation of MOPs in fields that still remain ripe toward the use of such unorthodox molecular porous platforms.