N-Heterocyclic carbenes and their precursors in functionalised porous materials

Boosting the π-Acceptor Property of Mesoionic Carbenes by Carbonylation with Carbon Monoxide

We report the room temperature dimerization of carbon monoxide mediated by C4/C5-vicinal anionic dicarbenes Li(ADC) (ADC = ArC{(Dipp)NC}2 ; Dipp = 2,6-iPr2 C6 H3 ; Ar = Ph, DMP (4-Me2 NC6 H4 ), Bp (4-PhC6 H4 )) to yield (E)-ethene-1,2-bis(olate) (i.e. - O-C=C-O- = COen ) bridged mesoionic carbene (iMIC) lithium compounds COen -[(iMIC)Li]2 (COen -[iMIC]2 = [ArC{(Dipp)NC}2 (CO)]2 ) in quantitative yields. COen -[(iMIC)Li]2 are highly colored stable solids, exhibit a strikingly small HOMO-LUMO energy gap, and readily undergo 2e-oxidations with selenium, CuCl (or CuCl2 ), and AgCl to afford the dinuclear compounds COon -[(iMIC)E]2 (E = Se, CuCl, AgCl) featuring a 1,2-dione bridged neutral bis-iMIC (i.e. COon -[iMIC]2 = [ArC{(Dipp)NC}2 (C=O)]2 ). COen -[(iMIC)Li]2 undergo redox-neutral salt metathesis reactions with LiAlH4 and (Et2 O)2 BeBr2 and afford COen -[(iMIC)AlH2 ]2 and COen -[(iMIC)BeBr]2 , in which the dianionic COen -moiety remains intact. All compounds have been characterized by NMR spectroscopy, mass spectrometry, and X-ray diffraction. Stereoelectronic properties of COon -[iMIC]2 are quantified by experimental and theoretical methods.

1H-1,2,3-Triazol-5-ylidenes as Catalytic Organic Single-Electron Reductants

Most of the known single-electron reductants are either metal based reagents, used in a stoichiometric amount, or a combination of an organic species and a photocatalyst. Here we report that 1H-1,2,3-triazol-5-ylidenes act not only as stoichiometric one-electron donors but also as catalytic organic reducing agents, without the need of a photocatalyst. As a proof of concept, we studied the reduction of quinones, which are well-known electron conveyors that are involved in various biological and industrial processes. This work also provides experimental evidence for the formation of a bis(triazolium)carbonate adduct, which acts as the resting state of the catalytic cycle and as the carbene reservoir.

Recyclable N-Heterocyclic Carbene Porous Coordination Polymers with Two Distinct Metal Sites for Transformation of CO2 to Cyclic Carbonates

Single-component catalysts with integrated multiple reactive centers could work in concert to achieve enhanced activity tailored for specific catalytic reactions, but they remain underdeveloped. Herein, we report the construction of heterogeneous bimetallic porous coordination polymers (PCPs) containing both porphyrin and N-heterocyclic carbene (NHC) metal sites via the coordinative assembly of the NHC functionalities. Three heterobimetallic PCPs (TIPP-Zn-Pd, TIPP-Cu-Pd and TIPP-Ni-Pd) have been prepared to verify this facile synthetic strategy for the first time. In order to establish a cooperative action toward the catalytic CO2 cycloaddition with epoxides, an additional tetraalkylammonium bromide functionality has also been incorporated into these polymeric structures through the N-substituent of the NHC moieties. The resulting heterogeneous bimetallic catalyst TIPP-Zn-Pd exhibits the best catalytic performance in CO2 cycloaddition with styrene oxide (SO) under solvent-free conditions at atmospheric pressure and is applicable to a wide range of epoxides. More importantly, TIPP-Zn-Pd works smoothly and is recyclable in the absence of a cocatalyst under 1.0 MPa of CO2 at 60 °C. This indicates that TIPP-Zn-Pd is quite competitive with the reported heterogeneous catalysts, which typically require a high reaction temperature above 100 °C under cocatalyst-free conditions. Thus, this work provides a new approach to design heterogeneous bimetallic PCP catalysts for high-performance CO2 fixation under mild reaction conditions.

Molecular Co-Catalyst Confined within a Metallacage for Enhanced Photocatalytic CO2 Reduction

The construction of structurally well-defined supramolecular hosts to accommodate catalytically active species within a cavity is a promising way to address catalyst deactivation. The resulting supramolecular catalysts can significantly improve the utilization of catalytic sites, thereby achieving a highly efficient chemical conversion. In this study, the Co-metalated phthalocyanine (Pc-Co) was successfully confined within a tetragonal prismatic metallacage, leading to the formation of a distinctive type of supramolecular photocatalyst (Pc-Co@Cage). The host-guest architecture of Pc-Co@Cage was unambiguously elucidated by single-crystal X-ray diffraction (SCXRD), NMR, and ESI-TOF-MS, revealing that the single cobalt active site can be thoroughly isolated within the space-restricted microenvironment. In addition, we found that Pc-Co@Cage can serve as a homogeneous supramolecular photocatalyst that displays high CO2 to CO conversion in aqueous media under visible light irradiation. This supramolecular photocatalyst exhibits an obvious improvement in activity (TONCO = 4175) and selectivity (SelCO = 92%) relative to the nonconfined Pc-Co catalyst (TONCO = 500, SelCO = 54%). The present strategy provided a rare example for the construction of a highly active, selective, and stable photocatalyst for CO2 reduction through a cavity-confined molecular catalyst within a discrete metallacage.

Palladium(II)-immobilized Triptycene based Hypercrosslinked Polymers: An Efficient, Green, and Reusable Heterogenous Catalyst for Suzuki-Miyaura Cross-coupling Reaction

The Suzuki-Miyaura cross-coupling (SMCC) involves the coupling of organohalides and organoboron molecules in the presence of Pd(II)-based catalysts. Often SMCC reactions employ homogenous catalysts. However, such homogenous SMCC reactions are associated with certain limitations which has motivated design of effective and sustainable Pd(II)-based heterogeneous catalytic systems. Herein, we report a systematic development of a Pd(II)-immobilized and triptycene based ionic hyper crosslinked polymer (Pd@TP-iHCP) and explored its application as a heterogeneous catalyst for SMCC reaction. Pd@TP-iHCP has ample N-heterocyclic carbene (NHC) pendants that anchor Pd(II) centres on the polymeric matrix. Pd@TP-iHCP was characterized satisfactorily using FT-IR, 13 C CP-MAS NMR, BET surface area analysis, SEM, EDX and HRTEM. The performance of Pd@TP-iHCP as a heterogeneous catalyst for SMCC reactions was explored using various combinations of aryl boronic acids and aryl halides. Experimental results show that Pd@TP-iHCP is associated with a moderately high surface area. It is an efficient catalyst for SMCC (in aqueous media) with a modest loading of 0.8 mol % Pd(II)-catalyst since high yields of the expected products were obtained in shorter time intervals. Pd@TP-iHCP also features excellent stability and catalyst recyclability since it could be re-used for several cycles without any significant decrease in catalytic efficiency.

Carbenes from cyclopropanated aromatics

Although a ripe old discipline by now, carbene chemistry continues to flourish as both theorists and experimentalists have shown sustained interest in this area of research. While there are numerous ways of generating carbenes, the thermal and/or photochemical decomposition of diazo compounds and diazirines remains, by far, the most commonly used method of producing these intermediates. There is no disputing the fact that these nitrogenous precursors have served carbene researchers well, but their use is not without problems. They are often sensitive and hazardous to handle and, sometimes, the desired nitrogenous precursor simply may not be available, e.g., for synthetic reasons, to study the particular carbene of interest. Furthermore, there is a legitimate concern that the photochemical generation of carbenes in solution from diazo compounds and diazirines may be contaminated by reactions in the excited states (RIES) of the precursors themselves. As an alternative, several laboratories, including ours, have used cyclopropanated aromatic systems to generate a wide range of carbenes. In each case, the cheleotropic extrusion of carbenes is accompanied by the formation of stable aromatic by-products such as phenanthrene, indane, naphthalene, and 1,4-dihydronaphthalene. The emergence of these "non-traditional" carbene sources, their versatility, and promise are reviewed in this work.

Aroyl-S,N-Ketene Acetals: Luminous Renaissance of a Class of Heterocyclic Compounds

Aroyl-S,N-ketene acetals represent a peculiar class of heterocyclic merocyanines, compounds bearing pronounced and rather short dipoles with great push-pull characteristics that define their rich properties. They are accessible via a wide array of synthetic concepts and procedures, ranging from addition-elimination and condensation procedures up to rearrangement and metal-mediated reactions. With our work from 2020, aroyl-S,N-ketene acetals have been identified as powerful and promising dyes with pronounced and vastly tunable solid-state emission and aggregation-induced emission properties. One characteristic trademark of this class of dye molecules is the level of control that could be exerted, and which was thoroughly explored. Based on these results, the field was opened to extend the system to bi- and multichromophoric systems by the full toolkit of synthetic organic chemistry thus giving access to even more exciting properties and manifolded substance libraries capitalizing on the AIE properties. This review aims at outlining the reaction-based principles that allow for a swift and facile access to aroyl-S,N-ketene acetals, their methodical and structural evolution and the plethora of fluorescence and aggregation properties.

Cofacial porphyrin organic cages. Metals regulating excitation electron transfer and CO2 reduction electrocatalytic properties

Herein, we introduce a comprehensive study of the photophysical behaviors and CO2 reduction electrocatalytic properties of a series of cofacial porphyrin organic cages (CPOC-M, M = H2, Co(ii), Ni(ii), Cu(ii), Zn(ii)), which are constructed by the covalent-bonded self-assembly of 5,10,15,20-tetrakis(4-formylphenyl)porphyrin (TFPP) and chiral (2-aminocyclohexyl)-1,4,5,8-naphthalenetetraformyl diimide (ANDI), followed by post-synthetic metalation. Electronic coupling between the TFPP donor and naphthalene-1,4 : 5,8-bis(dicarboximide) (NDI) acceptor in the metal-free cage is revealed to be very weak by UV-vis spectroscopic, electrochemical, and theoretical investigations. Photoexcitation of CPOC-H2, as well as its post-synthetic Zn and Co counterparts, leads to fast energy transfer from the triplet state porphyrin to the NDI unit according to the femtosecond transient absorption spectroscopic results. In addition, CPOC-Co enables much better electrocatalytic activity for CO2 reduction reaction than the other metallic CPOC-M (M = Ni(ii), Cu(ii), Zn(ii)) and monomeric porphyrin cobalt compartment, supplying a partial current density of 18.0 mA cm-2 at -0.90 V with 90% faradaic efficiency of CO.

From Supramolecular Organic Cages to Porous Covalent Organic Frameworks for Enhancing Iodine Adsorption Capability by Fully Exposed Nitrogen-Rich Sites

In order to overcome the limitations of supramolecular organic cages for their incomplete accessibility of active sites in the solid state and uneasy recyclability in liquid solution, herein a nitrogen-rich organic cage is rationally linked into framework systems and four isoreticular covalent organic frameworks (COFs), that is, Cage-TFB-COF, Cage-NTBA-COF, Cage-TFPB-COF, and Cage-TFPT-COF, are successfully synthesized. Structure determination reveals that they are all high-quality crystalline materials derived from the eclipsed packing of related isoreticular two-dimensional frameworks. Since the nitrogen-rich sites usually have a high affinity toward iodine species, iodine adsorption investigations are carried out and the results show that all of them display an enhancement in iodine adsorption capacities. Especially, Cage-NTBA-COF exhibits an iodine adsorption capacity of 304 wt%, 14-fold higher than the solid sample packed from the cage itself. The strong interactions between the nitrogen-rich sites and the adsorbed iodine species are revealed by spectral analyses. This work demonstrates that, utilizing the reticular chemistry strategy to extend the close-packed supramolecular organic cages into crystalline porous framework solids, their inherent properties can be greatly exploited for targeted applications.

Carbene-stabilized enantiopure heterometallic clusters featuring EQE of 20.8% in circularly-polarized OLED

Bright and efficient chiral coinage metal clusters show promise for use in emerging circularly polarized light-emitting materials and diodes. To date, highly efficient circularly polarized organic light-emitting diodes (CP-OLEDs) with enantiopure metal clusters have not been reported. Herein, through rational design of a multidentate chiral N-heterocyclic carbene (NHC) ligand and a modular building strategy, we synthesize a series of enantiopure Au(I)-Cu(I) clusters with exceptional stability. Modulation of the ligands stabilize the chiral excited states of clusters to allow thermally activated delayed fluorescence, resulting in the highest orange-red photoluminescence quantum yields over 93.0% in the solid state, which is accompanied by circularly polarized luminescence. Based on the solution process, a prototypical orange-red CP-OLED with a considerably high external quantum efficiency of 20.8% is prepared. These results demonstrate the extensive designability of chiral NHC ligands to stabilize polymetallic clusters for high performance in chiroptical applications.

Nickelacarborane-Supported Bis-N-heterocyclic Carbenes

Metallacarboranes have attracted significant attention due to their unique properties. Considerable efforts have been made on the reactions around the metal centers or the metal ion itself, while transformations of functional groups of the metallacarboranes have been much less explored. We presented here the formation of imidazolium-functionalized nickelacarboranes (2), their subsequent conversion to nickelacarborane-supported N-heterocyclic carbenoids (NHCs, 3), and the reactivities of 3 toward Au(PPh₃)Cl and Se powder, which resulted in the formation of bis-gold carbene complexes (4) and NHC selenium adducts (5). Cyclic voltammetry of 4 shows two reversible peaks, corresponding to the interconversion transformations Ni^II ↔ Ni^III and Ni^III ↔ Ni^IV. Theoretical calculations demonstrated relatively high-lying lone-pair orbitals, weak B-H···H-C interactions between the BH units and the methyl group, and weak B-H···π interactions between the BH groups and the vacant p-orbital of the carbene.

Hyper crosslinked polymer supported NHC stabilized gold nanoparticles with excellent catalytic performance in flow processes

Highly active and selective heterogeneous catalysis driven by metallic nanoparticles relies on a high degree of stabilization of such nanomaterials facilitated by strong surface ligands or deposition on solid supports. In order to tackle these challenges, N-heterocyclic carbene stabilized gold nanoparticles (NHC@AuNPs) emerged as promising heterogeneous catalysts. Despite the high degree of stabilization obtained by NHCs as surface ligands, NHC@AuNPs still need to be loaded on support structures to obtain easily recyclable and reliable heterogeneous catalysts. Therefore, the combination of properties obtained by NHCs and support structures as NHC bearing "functional supports" for the stabilization of AuNPs is desirable. Here, we report the synthesis of hyper-crosslinked polymers containing benzimidazolium as NHC precursors to stabilize AuNPs. Following the successful synthesis of hyper-crosslinked polymers (HCP), a two-step procedure was developed to obtain HCP·NHC@AuNPs. Detailed characterization not only revealed the successful NHC formation but also proved that the NHC functions as a stabilizer to the AuNPs in the porous polymer network. Finally, HCP·NHC@AuNPs were evaluated in the catalytic decomposition of 4-nitrophenol. In batch reactions, a conversion of greater than 99% could be achieved in as little as 90 s. To further evaluate the catalytic capability of HCP·NHC@AuNP, the catalytic decomposition of 4-nitrophenol was also performed in a flow setup. Here the catalyst not only showed excellent catalytic conversion but also exceptional recyclability while maintaining the catalytic performance.

Formation of Metallosupramolecular Helicates and Mesocates from Poly-N-Heterocyclic Carbene Ligands

In this work, a series of poly-NHC-based tetranuclear silver helicates and mesocates were synthesized from the silver-mediated self-assembly of the ligands involving multiple tridentate CNC-type pincer units and NHC coordination sites. The silver helicate was found to be transferred to a gold mesocate upon metal exchange reaction. The metallosupramolecular helicates and mesocates have been fully characterized by single-crystal X-ray crystallography, mass spectrometry, and multinuclear nuclear magnetic resonance spectroscopies. This study provides an example of the selective preparation of poly-NHC-based helicates or mesocates depending on the size of metal ions and the steric effect of ligands.

Porous organic polycarbene nanotrap for efficient and selective gold stripping from electronic waste

The role of N-heterocyclic carbene, a well-known reactive site, in chemical catalysis has long been studied. However, its unique binding and electron-donating properties have barely been explored in other research areas, such as metal capture. Herein, we report the design and preparation of a poly(ionic liquid)-derived porous organic polycarbene adsorbent with superior gold-capturing capability. With carbene sites in the porous network as the "nanotrap", it exhibits an ultrahigh gold recovery capacity of 2.09 g/g. In-depth exploration of a complex metal ion environment in an electronic waste-extraction solution indicates that the polycarbene adsorbent possesses a significant gold recovery efficiency of 99.8%. X-ray photoelectron spectroscopy along with nuclear magnetic resonance spectroscopy reveals that the high performance of the polycarbene adsorbent results from the formation of robust metal-carbene bonds plus the ability to reduce nearby gold ions into nanoparticles. Density functional theory calculations indicate that energetically favourable multinuclear Au binding enhances adsorption as clusters. Life cycle assessment and cost analysis indicate that the synthesis of polycarbene adsorbents has potential for application in industrial-scale productions. These results reveal the potential to apply carbene chemistry to materials science and highlight porous organic polycarbene as a promising new material for precious metal recovery.

Smart Hydrogen Atoms in Heterocyclic Cations of 1,2,4-Triazolium-Type Poly(ionic liquid)s

ConspectusDiscovering and constructing molecular functionality platforms for materials chemistry innovation has been a persistent target in the fields of chemistry, materials, and engineering. Around this task, basic scientific questions can be asked, novel functional materials can be synthesized, and efficient system functionality can be established. Poly(ionic liquid)s (PILs) have attracted growing interest far beyond polymer science and are now considered an interdisciplinary crossing point between multiple research areas due to their designable chemical structure, intriguing physicochemical properties, and broad and diverse applications. Recently, we discovered that 1,2,4-triazolium-type PILs show enhanced performance profiles, which are due to stronger and more abundant supramolecular interactions ranging from hydrogen bonding to metal coordination, when compared with structurally similar imidazolium counterparts. This phenomenon in our view can be related to the smart hydrogen atoms (SHAs), that is, any proton that binds to the carbon in the N-heterocyclic cations of 1,2,4-triazolium-type PILs. The replacement of one carbon by an electron-withdrawing nitrogen atom in the broadly studied heterocyclic imidazolium ring will further polarize the C-H bond (especially for C5-H) of the resultant 1,2,4-triazolium cation and establish new chemical tools for materials design. For instance, the H-bond-donating strength of the SHA, as well as its Bro̷nsted acidity, is increased. Furthermore, polycarbene complexes can be readily formed even in the presence of weak or medium bases, which is by contrast rather challenging for imidazolium-type PILs. The combination of SHAs with the intrinsic features of heterocyclic cation-functionalized PILs (e.g., N-coordination capability and polymeric multibinding effects) enables new phenomena and therefore innovative materials applications.In this Account, recent progress on SHAs is presented. SHA-related applications in several research branches are highlighted together with the corresponding materials design at size scales ranging from nano- to micro- and macroscopic levels. At a nanoscopic level, it is possible to manipulate the interior and outer shapes and surface properties of PIL nanocolloids by adjusting the hydrogen bonds (H-bonds) between SHAs and water. Owing to the interplay of polycarbene structure, N-coordination, and the polymer multidentate binding of 1,2,4-triazolium-type PILs, metal clusters with controllable size at sub-nanometer scale were successfully synthesized and stabilized, which exhibited record-high catalytic performance in H₂ generation via methanolysis of ammonia borane. At the microscopic level, SHAs are found to efficiently catalyze single crystal formation of structurally complex organics. Free protons in situ released from the SHAs serve as organocatalysts to activate formation of C-N bonds at room temperature in a series of imine-linked crystalline porous organics, such as organic cages, macrocycles and covalent organic frameworks; meanwhile the concurrent "salting-out" effect of PILs as polymers in solution accelerated the crystallization rate of product molecules by at least 1 order of magnitude. At the macroscopic scale, by finely regulating the supramolecular interactions of SHAs, a series of functional supramolecular porous polyelectrolyte membranes (SPPMs) with switchable pores and gradient cross-sectional structures were manufactured. These membranes demonstrate impressive figures of merit, ranging from chiral separation and proton recognition to switchable optical properties and real-time chemical reaction monitoring. Although the concept of SHAs is in the incipient stage of development, our successful examples of applications portend bright prospects for materials chemistry innovation.

Synthesis of Carborane-Backbone Metallacycles for Highly Selective Capture of n-Pentane

The specific recognition and separation of alkanes with similar molecular structures and close boiling points face significant scientific challenges and industrial demands. Here, rectangular carborane-based metallacycles were designed to selectively encapsulate n-pentane from n-pentane, iso-pentane, and cyclo-pentane mixtures in a simple-to-operate and more energy-efficient way. Metallacycle 1, bearing 1,2-di(4-pyridyl) ethylene, can selectively separate n-pentane from these three-component mixtures with a purity of 97%. The selectivity is ascribed to the capture of the preferred guest with matching size, C-H···π interactions, and potential B-H^δ-···H^δ+-C interactions. Besides, the removal of n-pentane gives rise to original guest-free carborane-based metallacycles, which can be recycled without losing performance. Considering the variety of substituted carborane derivatives, metal ions, and organic linkers, these new carborane-based supramolecular coordination complexes (SCCs) may be broadly applicable to other challenging recognition and separation systems with good performance.

A CO2 -Masked Carbene Functionalized Covalent Organic Framework for Highly Efficient Carbon Dioxide Conversion

Free N-heterocyclic carbenes (NHCs) are generally prepared by treatment of imidazolium precursors with strong alkali reagents, which usually produces inactive NHC dimers. This treatment would destroy porous supports and thus make supported NHC catalysts difficult to recovery and reuse. Herein, we report the first stable CO₂ -masked N-heterocyclic carbenes (NHCs) grafted on a porous crystalline covalent organic framework (COF). The stable NHC-CO₂ moieties in the COF-NHC-CO₂ could be transformed in situ into isolated NHCs by heating, which exhibit superior catalytic performances in hydrosilylation and N-formylation reactions with CO₂ . The NHC sites can reversibly form NHC-CO₂ and thus can be easily recycled and reused while maintaining excellent catalytic activity. Density functional theory calculations revealed that NHC sites can be fully exposed after removal of CO₂ -masks and rapidly react with silanes, which endows COF-NHC with high catalytic activity.

N-Heterocyclic carbene and cyclic (alkyl)(amino)carbene complexes of vanadium(III) and vanadium(V)

[VCl₃(THF)₃] offers a convenient entrance point into the chemistry of carbene stabilized V(III) complexes. Herein we report the paramagnetic mono- and biscarbene complexes [VCl₃(cAAC^Me)] 1, [VCl₃(cAAC^Me)(THF)] 1(thf), [VCl₃(IMes)] 2, [{VCl₂(IiPr^Me)(μ-Cl)}₂] 3, [VCl₃(IDipp)] 4, [VCl₃(SIDipp)] 5, [VCl₃(SIDipp)(THF)] 5(thf), [VCl₃(ItBu)] 6, [VCl₃(cAAC^Me)₂] 7 and [VCl₃(IiPr^Me)₂] 8. Reaction of 1 with MesMgCl, MesLi and LiNPh₂ afforded the complexes [VCl₂(Mes)(cAAC^Me)] 9, [cAAC^MeH]⁺[VCl₂Mes₂]^-10 and [VCl₂(NPh₂)(cAAC^Me)] 11. The V(V) complexes [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(SIDipp)] 13 were selectively prepared from oxygen oxidation of 4 and 5. [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(IMes)] react with isocyanates to yield the NHC-ligated imido complexes [V(N-p-CH₃C₆H₄)Cl₃(IDipp)] 14, [V(N-p-FC₆H₄)Cl₃(IDipp)] 15, [V(N-p-CH₃C₆H₄)Cl₃(SIDipp)] 16, [V(N-p-FC₆H₄)Cl₃(SIDipp)] 17, [V(N-p-CH₃C₆H₄)Cl₃(IMes)] 18 and [V(N-p-FC₆H₄)Cl₃(IMes)] 19.

Chirality influence on the cytotoxic properties of anionic chiral bis(N-heterocyclic carbene)silver complexes

Complexes Na₃[Ag(NHC^R)₂], 2a-e and 2b'-c', where NHC^R is a N-heterocyclic carbene of the 2,2'-(1H-2λ³,3λ⁴-imidazole-1,3-diyl)dicarboxylate type, were prepared by treatment of compounds HL^R, 1a-e and 1b'-c' (2-(1-(carboxyalkyl)-1H-imidazol-3-ium-3-yl)carboxylate), with silver oxide in the presence of aqueous sodium hydroxide. They were characterized by analytical, spectroscopic (infrared, IR, ¹H and ¹³C nuclear magnetic resonance, NMR, and circular dichroism) and X-ray methods (2a). In the solid state, the anionic part of complex 2a, [Ag(NHC^H)₂]^3-, shows a linear disposition of C_carbene-Ag-C_carbene atoms and an eclipsed conformation of the two NHC ligands. The proposed bis(NHC) nature of the silver complexes was maintained in solution according to NMR and density functional theory (DFT) calculations. The cytotoxic activity of compounds 2 was evaluated against four cancer cell lines and one non-cancerous cell line and several structure-activity correlations were found for these complexes. For instance, the activity decreased when the bulkiness of the R alkyl group in Na₃[Ag(NHC^R)₂] increased. More interesting is the detected chirality-anticancer relationship, where complexes Na₃[Ag{(S,S)-NHC^R}₂] (R = Me, 2b; ⁱPr, 2c) showed better anticancer activity than those of their enantiomeric derivatives Na₃[Ag{(R,R)-NHC^R}₂] (R = Me, 2b'; ⁱPr, 2c').

N-Heterocyclic Carbene-Stabilized Gold Nanoclusters with Organometallic Motifs for Promoting Catalysis

The complexity of heterogeneous metal catalysts makes it challenging to gain insights into their catalytic mechanisms. Thus, there exists a huge gap between heterogeneous catalysis and organometallic catalysis. With the success in the preparation of highly robust atomically precise metal nanocluster catalysts (i.e., [Au₁₆(NHC-1)₅(PA)₃Br₂]³⁺ and [Au₁₇(NHC-1)₄(PA)₄Br₄]⁺, where NHC-1 is a bidentate NHC ligand, and PA is phenylacetylide) with surface organometallic motifs anchored on the metallic core, we demonstrate in this work how the metallic core works synergistically with the surface organometallic motifs to enhance the catalysis. More importantly, the discovery allows the development of highly stable and recyclable heterogeneous metal catalysts to achieve efficient hydroamination of alkynes with an extremely low catalyst dosage (0.002 mol %), helping bridge the gap between heterogeneous and homogeneous metal catalysis. The surface modification of metal nanocatalysts with organometallic motifs provides a new design principle of metal catalysts with enhanced catalysis.

Synthesis and disassembly of an organometallic polymer comprising redox-active Co4S4 clusters and Janus biscarbene linkers

Here, we show for the first time that main-chain organometallic polymers (MCOPs) can be prepared from Janus N-heterocyclic carbene (NHC) linkers and polynuclear cluster nodes. The crosslinked framework Co₄S₄-MCOP is synthesized via ligand displacement reactions and undergoes reversible electron transfer in the solid state. Discrete molecular cluster species can be excised from the framework by digesting the solid in solutions of excess monocarbene. Finally, we demonstrate a synthetic route to monodisperse framework particles via coordination modulation.

Chemical conversion of metal–organic frameworks into hemi-covalent organic frameworks

A hemi-covalent organic framework, P-Ni3(TAA)3, with the different conversion efficiency (P) of 34–72% for bis(diimine) nickel units has been obtained. The 40%-Ni3(TAA)3 exhibits the improved chemical stability and significantly catalytic property.