In situ formation of Hg2+-coordinated fluorescent nanoparticles through a supramolecular polymer network used for efficient Hg2+ sensing and separation

Bioinspired peptide sensors with tailorable structure for specific and in-situ tracking of Hg2+ biodistribution in living cells upon acute exposure

Metal-biomolecule interactions that are ubiquitous in nature provide fundamental knowledge and rich structural motifs for the development of functional molecules and smart sensors. In this work, inspired by the active sites in metalloproteins, a biomimetic peptide sensor was designed for the selective recognition and activatable sensing of Hg2+ in living biosystems. Tetraphenylethylene (TPE) with typical aggregation-induced emission (AIE) behavior, was introduced as the activatable signal transducer to enable high signal-to-background signaling. The tailorable side chains and flexible peptide linkage were exploited to tune the coordination affinity, selectivity, and fluorescence response toward Hg2+. Benefiting from the rapid response (1 min), high specificity and nanomolar sensitivity, the peptide sensor allows investigating the mechanism of acute toxicity of Hg2+. Capable of penetrating plasma membrane, the peptide sensor revealed the dosage-dependent and dynamic subcellular biodistribution behavior of Hg2+. The finding that Hg2+ preferentially accumulates and rapidly enriches in nucleoli of cells upon short exposure, evidences the adverse effect toward ribosome biogenesis and the resultant genetic deficiencies. These results highlight the peptide sensors as promising tools for not only on-site detection, but also studying the cell biology and toxicology of this metal ion in living biosystems.

A Review on Pyridine Based Colorimetric and Fluorometric Chemosensor for Detection of Hg2+ ion

Pyridine, N-containing heterocyclic organic compound, displays strong coordination capabilities with various metal ions. It can be synthesized through various methods, such as Friedlander synthesis, heterocumulene synthesis, cross-coupling reactions, the Radziszewski reaction, Bonnemann cyclization, as well as cobalt-catalyzed synthesis. Experimental and spectroscopic analyses have demonstrated a strong binding affinity between pyridine and several heavy metal ions, including Pb2+, Hg2+, and Cd2+ ions. The escalating environmental pollution caused by the disposal of heavy metal ions in rivers, open air, and water reservoirs poses a significant threat to both ecosystem and human health. To address these environmental challenges, a cost-effective and easily synthesized chemosensor has been prepared for identifying toxic heavy metal ions in various samples. Pyridine's photophysical properties make it an effective sensor for detecting Hg2+ ions, displaying fluorescence quenching or enhancement in their presence. The coordination between pyridine and Hg2+ ions lead to shifts in the absorption spectra. The pyridine-based sensor has been evaluated for its sensitivity, selectivity, and detection limits under different experimental conditions. Pyridine's solubility and environmental stability make it applicable for real-time detection, making pyridine probes valuable tool for monitoring toxic Hg2+ ions in the environment. The results demonstrate that the pyridine-based chemosensor exhibits good selectivity and sensitivity for targeting Hg2+ ions, with detection limits within acceptable ranges. This review (from years 2011 to 2023) emphasizes the preparation of various substituted pyridine compounds as selective, sensitive, and specific sensors for real-time detection of Hg2+ ions.

A new bodipy/pillar[5]arene functionalized magnetic sporopollenin for the detection of Cu(II) and Hg(II) ions in aqueous solution

In this study, a new bodipy/pillar[5]arene functionalized magnetic MS-Sp-P[5]-bodipy microcapsule sensor was prepared based on the use of environmentally friendly for the selective and sensitive detection of Cu(II) and Hg(II) ions in aqueous media. SEM results used in the characterization process of the materials synthesized at each stage confirmed the structural and morphological changes in the pore structure, while other characterization results (FT-IR and XRD) elucidated the role of pillar[5]arene compound and bodipy dye in the synthesis of magnetic microcapsule sensors. The colloidal solution of MS-Sp-P[5]-bodipy (water/ethanol)) showed two fluorescence bands centered at 402 and 540 nm. The detection limits of MS-Sp-P[5]-bodipy for Hg(II) and Cu(II) were calculated to be 0.06 µM and 2.27 µM, respectively (at 540 nm). The linear range of the magnetic sensor for Hg(II) and Cu(II) was found to be in the range of 1-150 µM and 10-150 µM, respectively. The experimental results (response time, pH, temperature, sensitivity and selectivity) demonstrated the applicability and potential of the prepared magnetic microcapsule sensor for the detection of Cu(II) and Hg(II) in water and tap water samples containing heavy metal ions.

Boric Acid Functional Fluorescent Covalent-Organic Framework for Sensitive and Selective Visualization of CH3Hg. ACS APPLIED MATERIALS & INTERFACES 2023;15:9524-9532. [PMID: 36757912 DOI: 10.1021/acsami.2c23302]

Methylmercury (CH3Hg+) recognition remains a challenging and imperative task due to its high toxicity and wide existence in the ecosystem. Herein, a novel fluorescent covalent-organic framework containing a boric acid functional group (COF-BA) was prepared by a postmodification strategy for CH3Hg+ detection. COF-BA served as a sensing platform for CH3Hg+ with fluorescence static quenching accompanied by fluorescence color changing from intense blue to colorless, and the detection limit was determined as 1.68 μM in a relatively narrow concentration range. COF-BA also exhibited superior selectivity toward CH3Hg+ detection. Furthermore, the spiked and recovery test in real water samples showed its efficient detection practicality. The detection mechanism of COF-BA toward CH3Hg+ was investigated. The recognitive boric acid group in COF-BA was first replaced by CH3Hg+. Then, the quinoline structure that served to limit the rotation of the imine bond was disrupted, leading to dramatic fluorescence quenching. The boric acid functional COF fluorescent probe can be a promising sensing platform for the detection of methylmercury and also provides new ideas for the construction of new fluorescent COF materials.

Reversible detection of Hg(II) in pure water based on thymine modified nitrogen, sulfur co-doped carbon dots combined with antidote

Conventional Hg²⁺ visual sensors are unsustainable, hindering their practical application for improved water quality and health. In order to address this challenge, herein, N, S co-doped carbon nanodots (NS-CDs) were prepared and well characterized, presented the fluorescent monitoring for Hg²⁺ over other metal ions with the limit of detection (LOD) of 0.47 µM. Next, the CDs were successfully modified by thymine without any fluorescence labelling (referred to as T-NS-CDs). The sensitivity to Hg²⁺ cloud be noticeable enhanced due to the formation of T-Hg²⁺-T specific base pairs. Accordingly, the LOD was calculated with values as low as 1.56 nM. Furthermore, Hg²⁺ could be released and complexed with antidote (meso-2,3-dimercaptosuccinic acid) (DMSA-Hg²⁺), being the responsible for the reversible interconversion between T-Hg²⁺-T and DMSA-Hg²⁺. Interestingly, the proposed sensing system also applies to the fluorescent sensing for Hg²⁺ in tap water with satisfactory recoveries (96.97 %-101.38 %, RSD < 2 %). Thus, by simply combination of elemental doping and surface functionalization, the surface state and functionalities of CDs could be tailorable, endowing the fluorometric sensing towards Hg²⁺ in environmental system.

Green, Efficient Detection and Removal of Hg2+ by Water-Soluble Fluorescent Pillar[5]arene Supramolecular Self-Assembly

Developing a water-soluble supramolecular system for the detection and removal of Hg²⁺ is extremely needed but remains challenging. Herein, we reported the facile construction of a fluorescent supramolecular system (H⊃G) in 100% water through the self-assembly of carboxylatopillar[5]arene sodium salts (H) and diketopyrrolopyrrole-bridged bis(quaternary ammonium) guest (G) by host–guest interaction. With the addition of Hg²⁺, the fluorescence of H⊃G could be efficiently quenched. Since Hg²⁺ showed synergistic interactions (coordination and Hg²⁺- cavity interactions with G and H, respectively), crosslinked networks of H⊃G@Hg²⁺ were formed. A sensitive response to Hg²⁺ with excellent selectivity and a low limit of detection (LOD) of 7.17 × 10⁻⁷ M was obtained. Significantly, the quenching fluorescence of H⊃G@Hg²⁺ can be recovered after a simple treatment with Na₂S. The reusability of H⊃G for the detection of Hg²⁺ ions was retained for four cycles, indicating the H⊃G could be efficiently used in a reversible manner. In addition, the H⊃G could efficiently detect Hg²⁺ concentration in real samples (tap water and lake water). The developed supramolecular system in 100% water provides great potential in the treatment of Hg²⁺ detection and removal for environmental sustainability.

A novel sensor for visual and selective detection of Hg2+ based on functionalized doped quantum dots

In this paper, a novel analytical platform for the visual, sensitive and reliable analysis of mercury ions (Hg²⁺) is fabricated based on functionalized doped quantum dots. We synthesized a new specific nano-material, zinc dithiothreitol combined with graphene quantum dots (ZnNCs-NGQDs), by a simple and convenient method which, as an efficient luminophore, was then applied to construct an electrochemiluminescence (ECL) system for the first time. Under optimized conditions, the ECL sensor showed an excellent response for Hg²⁺ in the linear range of 1.0 mM to 10 pM, with a low detection limit of 3 pM. Moreover, the proposed method demonstrated satisfactory selectivity, stability and acceptable reproducibility for the detection of Hg²⁺. The recovery of tap water and lake water samples ranged from 96% to 105%, indicating the potential applicability of the proposed method for monitoring environmental water samples. Meanwhile, visual attempts for mercury ion detection by using doped quantum dots have also obtained satisfactory results. Importantly, our research revealed a viable method for improving the sensitivity and convenience of target studies in sensing fields derived from functional material design.

A novel ratiometric fluorescent and colorimetric sensor based on a 1,8-naphthalimide derivative for nanomolar Cu2+ sensing: smartphone and food applications

A novel 1,8-naphthalimide-based chemical sensor with ratiometric fluorescence behavior, as well as “naked-eye” response was developed for the sensitive and specific determination of Cu2+ at nanomolar levels.

A switch-on xanthene-triphenylamine based fluorescent and colorimetric sensor for the detection of ultra-trace Hg2+ in food samples and living cells

A novel colorimetric and fluorescent "switch-on" probe based on xanthene-triphenylamine was developed for detection of Hg2+, which threatens public health, food safety and the environment. The probe displayed superior colorimetric and fluorescent selectivity/sensitivity toward Hg2+ over a series of metal ions via Hg2+-triggered deprotection reaction. Hg2+ induced a ∼18-fold enhancement in emission intensity of probe TXS with yellow fluorescence (λem = 558 nm) and led to distinct color transition from light yellow to blue or yellow under daylight depending on solvent mixture. Detection parameters were optimized and examined for the influence that they exerted on the detection which involved the usage of the Box-Behnken design methodology. The sensing pathway was also examined theoretically by DFT and TD-DFT calculations. The probe was successfully utilized for the detection of Hg2+ in several food and water samples with good recoveries. Cell imaging studies demonstrated that the probe was suitable for Hg2+ detection in live cells.