Lithium calix[4]arenes: structural studies and use in the ring opening polymerization of cyclic esters

Recycling primary lithium batteries using a coordination chemistry approach: recovery of lithium and manganese residues in the form of industrially important materials

In this study, we have investigated the potential use of post-consumer primary lithium metal batteries (LMBs) commonly used in portable electronic devices to recover lithium and manganese in the form of industrially important materials. A direct reaction of lithium-containing electronic waste with a naturally sourced ester, methyl salicylate, combined with a wide range of aliphatic alcohols has been used as a general method for recovering lithium in the form of lithium aryloxides of different nuclearities [Li(OAr)(HOMe)2] (1), [Li(OAr)(HOAr)] (2), [Li(OAr)(HOEt)]2 (3), [Li(OAr)(H2O)]2 (4), [Li4(OAr)4(EGME)2] (5), [Li6(OAr)6] (6-8) for ArOH = methyl salicylate (1, 2, 4, 6), ethyl salicylate (3, 7), 2-methoxyethyl salicylate (5, 8), and EGME = 2-methoxyethanol. The hydrolysis of 7 was then used to synthesize lithium salicylate [Li(Sal)(H2O)]n (10), which is an important antioxidant in the production of oils and grease. The discharged cathode material of Li-MnO2 batteries was investigated as a source from which LiClO4, Li2CO3, LiMn2O4, and Mn2O3 can be recovered by means of water-alcohol extraction or calcination. Particular emphasis was placed on the detailed characterization of all battery components and their decomposition products. LMBs were completely recycled for the first time, and materials were recovered from the cathode and the anode.

A Synthetic, Structural, Spectroscopic, and Computational Study of Alkali Metal-Thioether, -Selenoether, and -Telluroether Interactions

The rigid thioether- and selenoether-containing pro-ligands, 4,5-bis(phenylsulfido)-2,7,9,9-tetramethylacridan (H[AS2Ph2] (1)) and 4,5-bis(phenylselenido)-2,7,9,9-tetramethylacridan (H[ASe2Ph2] (2)), were deprotonated with one equiv of nBuLi to afford dimeric lithium complexes [Li(AE2Ph2)]2 (E = S (3), Se (4)) or with one equiv of KCH2Ph to afford the previously reported potassium complexes [K(AS2Ph2)(dme)]x (5) and [K(ASe2Ph2)(dme)2] (6). Attempts to prepare a direct telluroether analogue of compounds 1-2 were unsuccessful. However, the bulky selenoether- and telluroether-containing pro-ligands 4,5-bis(2,4,6-triisopropylphenylselenido)-2,7,9,9-tetramethylacridan (H[ASe2Tripp2] (7)) and 4,5-bis(2,4,6-triisopropylphenyltellurido)-2,7,9,9-tetramethylacridan (H[ATe2Tripp2] (8)) were accessed via the reaction of 4,5-dibromo-2,7,9,9-tetramethylacridan with three equiv of nBuLi, followed by the addition of two equiv of the corresponding diaryl dichalcogenide and quenching with dilute HCl(aq). The new selenoether- and telluroether-containing pro-ligands were subsequently deprotonated using KCH2Ph to afford [K(AE2Tripp2)(dme)2] (E = Se (9), Te (10)). Compounds 1-10 were characterized by 1H, 13C{1H}, 77Se{1H}, 125Te{1H}, and 7Li NMR spectroscopy, where applicable, and single-crystal X-ray structures were obtained for all lithium and potassium complexes (3-6 and 9-10). DFT calculations were also performed to assess the nature of bonding between the hard group 1 cations and the soft chalcogenoethers.

Ring-opening polymerization of rac-lactide catalyzed by magnesium and zinc complexes supported by an NNO ligand

Preparation of magnesium and zinc complexes containing unsymmetric tertiary amine ligands and their catalytic properties for polymerization of rac-lactide.

Lithium sensors based on photophysical changes of 1-aza-12-crown-4 naphthalene derivatives synthesized via Buchwald–Hartwig amination

Lithium sensor based on 1-aza-12-crown-4 naphthalene that can detect lithium ions through absorption and emission changes with the detection limit of 21 μM in an organic solvent.

Lead calix[n]arenes (n = 4, 6, 8): structures and ring opening homo-/co-polymerization capability for cyclic esters

Reaction of [LiPb(OiPr)₃]₂ (generated in situ) with either p-tert-butylcalix[4]areneH₄ (L⁴H₄) or p-tert-butylcalix[6]areneH₆ (L⁶H₆) resulted in the heterometallic lithium/lead complexes [Pb₄Li₂(L⁴)₄H₆(MeCN)₃]·4.5MeCN (1·4.5MeCN) and [Pb₈Li₁₀Cl₂(L⁶H₂)₃(L⁶)(OH)₂(O)₂(H₂O)₂(MeCN)₄]·14MeCN (2·14MeCN), respectively. Use of the dimethyleneoxa-bridged p-tert-butyltetrahomodioxacalix[6]areneH₆ (L^6'H₆) with five equivalents of [Pb(OiPr)₂] afforded [Pb₁₃(L^6')₃O₄(iPrOH)]·11MeCN (3·11MeCN). Use of the larger p-tert-butylcalix[8]areneH₈ (L⁸H₈) with [Pb(OtBu)₂] or {Pb[N(TMS)₂]} (TMS = SiMe₃) afforded the products [Pb₁₂(L⁸)₂O₄]·8.7C₇H₈ (4·8.7C₇H₈) or [Pb₆(SiMe₃)₂(L⁸)O₂Cl₂] (5), respectively. Reaction of {Pb[N(TMS)₂]} (generated in situ from (Me₃Si)₂NH, nBuLi and PbCl₂) with L⁶H₆ afforded, after work-up (MeCN), the mixed-metal complex [Pb₁₀Li₂(L⁶)₂(OH)Cl(O)₄]·9.5MeCN (6·9.5MeCN). Reaction of distilled {Pb[N(TMS)₂]} (six equivalents) with L⁸H₈ resulted in the complex [Pb₁₂(L⁸)₂O₄]·12MeCN (7·12MeCN). Complexes 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] have been screened for their potential to act as pre-catalysts in the ring opening polymerization (ROP) of ε-caprolactone (ε-CL) and δ-valerolactone (δ-VL) and the copolymerization thereof. Generally, the lithiated complexes 1 and 2 exhibited better activities than the other pre-catalysts screened herein. For ε-CL and δ-VL, moderate activity at 130 °C over 24 h was observed for 1-7. In the case of the co-polymerization of ε-CL with δ-VL, 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] afforded reasonable conversions and high molecular weight polymers. The systems 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] also proved to be active in the ROP of the rac-lactide (r-LA); the activity trend was found to be 1 > 2 ≈ Pb(OiPr)₂ ≈ [Pb(N(TMS)₂)₂] > 4 > 5 ≈ 6 ≈ 7 > 3.

Lithiated Calix[n]arenes (n = 6 or 8): Synthesis, Structures, and Use in the Ring-Opening Polymerization of Cyclic Esters

A variety of lithiated calix[n]arenes, for which n = 6 or 8, have been isolated, structurally characterized, and evaluated as catalysts for the ring-opening polymerization (ROP) of the cyclic esters ε-caprolactone (ε-CL), δ-valerolactone (δ-VL), and rac-lactide (r-LA). In particular, interaction of p-tert-butylcalix[6]areneH₆ (L⁶H₆) with LiOtBu in THF led to the isolation of [Li₁₄(L⁶H)₂(CO₃)₂(THF)₆(OH₂)₆]·14THF (1·14THF), the core of which has a chain of five Li₂O₂ diamonds. Similar use of p-tert-butylcalix[8]areneH₈ (L⁸H₈) afforded [Li₁₀(L⁸)(OH)₂(THF)₈]·7THF (2·7THF), where the core is composed of a six-rung Li-O ladder. Use of debutylated calix[8]areneH₈ (deBuL⁸H₈) led to an elongated dimer [Li₁₈(deBuL⁸)₂(OtBu)₂(THF)₁₄]·4THF (3·4THF) in which the calix[8]arenes possess a wavelike conformation forming bridges to link three separate Li_xO_y clusters (where x and y = 6, ignoring the THF donor oxygens). Interaction of L⁸H₈ with LiOH·H₂O afforded [Li₄(L⁸H₄)(OH₂)₄(THF)₆]·5.5THF (4·5.5THF), where intramolecular H-bond interactions involving Li, O, and H construct a cage in the core of the structure with six- and eight-membered rings. Lastly, addition of Me₃Al to the solution generated from L⁸H₈ and LiOtBu led to the isolation of [(AlMe₂)₂Li₂₀(L⁸H₂)₂(OH₂)₄(O^2-)₄(OH)₂(NCMe)₁₂]·10MeCN (5·10MeCN) in which Li, O, Al, and N centers build a polyhedral core. These complexes have been screened for their potential to act as precatalysts in the ring-opening polymerization (ROP) of ε-CL, δ-VL, and r-LA. For the ROP of ε-CL, δ-VL, and r-LA, systems 1-4 exhibited moderate activity at 130 °C over 8 h. In the case of ROP using the mixed-metal (Li/Al) system 5, better conversions and high molecular weight polymers were achieved. In the case of the ROP of ω-pentadecalactone (ω-PDL), the systems proved to be inactive under the conditions employed herein.

Structure and ionic conductivity of the octahydrate of tetralithium salt of calix[4]arenesulfonic acid

The structure and ionic conductivity of the octahydrate of tetralithium salt of calix[4]arenesulfonic acid was determined for the first time.