Stochastic biosensors based on N- and S-doped graphene for the enantioanalysis of aspartic acid in biological samples

Carbon Nanopowder-Based Stochastic Sensor for Ultrasensitive Assay of CA 15-3, CEA and HER2 in Whole Blood

Two microsensors obtained by the physical immobilization of 5,10,15,20-tetraphenyl-21H,23H-porphine (TPP) and 5,10,15,20-tetrakis (pentafluorophenyl chloride)-21H,23H-iron (III) porphyrin (Fe(TPFPP)Cl) in carbon nanopowder decorated with gold nanoparticles (AuNp) were designed, characterized, validated and used for the molecular recognition and simultaneous ultrasensitive determination of CEA, CA15-3 and HER2 in whole blood. High sensitivities were recorded for both microsensors. Low limits of quantification were recorded for all biomarkers: CEA (12.8 pg mL-1 by using Fe(TPFPP)Cl/AuNp, and 190 fg mL-1 by using TPP/AuNp), CA 15-3 (100 fU mL-1 for both microsensors) and HER2 (3.9 fg mL-1 by using Fe(TPFPP)Cl/AuNp, and 35 fg mL-1 by using TPP/AuNp). A very good correlation between the results obtained using the proposed microsensors and ELISA, certified by the Student t-test, proves that the screening test can be used for ultrasensitive assays of the three biomarkers in whole blood.

Sulfur-Doped Graphene-Based Electrochemical Sensors for Fast and Sensitive Determination of (R)-(+)-Limonene from Beverages

Two sensors based on sulfur-doped graphene, a gold nanoparticle paste modified with 5,10,15,20-tetraphenyl-21H,23H-porphine and 5,10,15,20-tetrakis (pentafluorophenyl chloride)-21H,23H-iron (III) porphyrin, were proposed for the determination of R-limonene in beverages (triple sec liqueur and limoncello). Differential pulse voltammetry was the method used to characterize and validate the proposed sensors. The response characteristics showed that the detection limits for both sensors were 3 × 10^-6 mol L^-1, while the quantification limits were 1 × 10^-5 mol L^-1. Both sensors can be used to determine R-limonene in a concentration range between 1 × 10^-5-6 × 10^-4 mol L^-1 for TPP/AuNPs-S-Gr and 1 × 10^-5-1 × 10^-3 mol L^-1 for Fe(TPFPP)Cl/AuNPs-S-Gr. The highest sensitivity (0.7068 µA/mol L^-1) was recorded when the TPP/AuNPs-S-Gr sensor was used, proving that the electrocatalytic effect of this electrocatalyst is higher compared to that of Fe(TPFPP)Cl/AuNPs-S-Gr. High recoveries (values greater than 99.00%) and low RSD values (%) (below 5.00%) were recorded for both sensors when used to determine R-limonene in triple sec liqueur and limoncello.

Disposable stochastic sensors for fast analysis of ibuprofen, ketoprofen, and flurbiprofen in their topical pharmaceutical formulations

Three disposable stochastic sensors based on maltodextrin (dextrose equivalent = 4-7) and nanostructures (copper monolayer, carbon monolayer and carbon-copper composite layer) deposited using cold plasma on copy paper were proposed for the fast analysis of ibuprofen, ketoprofen and flurbiprofen in pharmaceutical formulation samples. The widest linear concentration ranges recorded were: for ibuprofen 1 fmol/L - 1 mmol/L when the disposable stochastic sensor based on carbon monolayer was used, for ketoprofen 1 fmol/L - 1 mmol/L when the disposable stochastic sensors based on copper monolayer and carbon-copper composite layer were used, and for flurbiprofen 1 fmol/L - 10 mmol/L when the disposable stochastic sensor based on carbon-copper composite layer was used. The lowest limit of detection recorded for each non-steroidal anti-inflammatory drug was 1 fmol/L.

Recent Progress in Graphene- and Related Carbon-Nanomaterial-based Electrochemical Biosensors for Early Disease Detection

Graphene- and carbon-based nanomaterials are key materials to develop advanced biosensors for the sensitive detection of many biomarkers owing to their unique properties. Biosensors have attracted increasing interest because they allow efficacious, sensitive, selective, rapid, and low-cost diagnosis. Biosensors are analytical devices based on receptors for the process of detection and transducers for response measuring. Biosensors can be based on electrochemical, piezoelectric, thermal, and optical transduction mechanisms. Early virus identification provides critical information about potentially effective and selective therapies, extends the therapeutic window, and thereby reduces morbidity. The sensitivity and selectivity of graphene can be amended via functionalizing it or conjoining it with further materials. Amendment of the optical and electrical features of the hybrid structure by introducing appropriate functional groups or counterparts is especially appealing for quick and easy-to-use virus detection. Various techniques for the electrochemical detection of viruses depending on antigen-antibody interactions or DNA hybridization are discussed in this work, and the reasons behind using graphene and related carbon nanomaterials for the fabrication are presented and discussed. We review the existing state-of-the-art directions of graphene-based classifications for detecting DNA, protein, and hormone biomarkers and summarize the use of the different biosensors to detect several diseases, like cancer, Alzheimer's disease, and diabetes, to sense numerous viruses, including SARS-CoV-2, human immunodeficiency virus, rotavirus, Zika virus, and hepatitis B virus, and to detect the recent pandemic virus COVID-19. The general concepts, mechanisms of action, benefits, and disadvantages of advanced virus biosensors are discussed to afford beneficial evidence of the creation and manufacture of innovative virus biosensors. We emphasize that graphene-based nanomaterials are ideal candidates for electrochemical biosensor engineering due to their special and tunable physicochemical properties.

Ultrafast Growth of Large Area Graphene on Si Wafer by a Single Pulse Current

Graphene has many excellent optical, electrical and mechanical properties due to its unique two-dimensional structure. High-efficiency preparation of large area graphene film is the key to achieve its industrial applications. In this paper, an ultrafast quenching method was firstly carried out to flow a single pulse current through the surface of a Si wafer with a size of 10 mm × 10 mm for growing fully covered graphene film. The wafer surface was firstly coated with a 5-nm-thick carbon layer and then a 25-nm-thick nickel layer by magnetron sputtering. The optimum quenching conditions are a pulse current of 10 A and a pulse width of 2 s. The thus-prepared few-layered graphene film was proved to cover the substrate fully, showing a high conductivity. Our method is simple and highly efficient and does not need any high-power equipment. It is not limited by the size of the heating facility due to its self-heating feature, providing the potential to scale up the size of the substrates easily. Furthermore, this method can be applied to a variety of dielectric substrates, such as glass and quartz.