EDOT-based conjugated polymers accessed via C–H direct arylation for efficient photocatalytic hydrogen production

Advancing Integration of Direct C-H Arylation-Derived Star-Shaped Oligomers as Second Acceptors for Ternary Organic Solar Cells

Organic solar cells (OSCs) could benefit from the ternary bulk heterojunction (BHJ), a method that allows for fine-tuning of light capture, cascade energy levels, and film shape, in order to increase their power conversion efficiency (PCE). In this work, the third components of PM6:Y6 and PM6:BTP-eC9 BHJs are a set of four star-shaped unfused ring electron acceptors (SSUFREAs), i.e., BD-IC, BFD-IC, BD-2FIC, and BFD-2FIC, that are facilely synthesized by direct C-H arylation. The four SSUFREAs all show complete complementary absorption with PM6, Y6, and BTP-eC9, which facilitates light harvesting and exciton collection. When BFD-2FIC is added as a third component, the PCEs of PM6:Y6 and PM6:BTP-eC9 binary BHJs are able to be improved from 15.31% to 16.85%, and from 16.23% to 17.23%, respectively, showing that BFD-2FIC is useful for most effective ternary OSCs in general, and increasing short circuit current (JSC) and better film morphology are two additional benefits. The ternary PM6:Y6:BFD-2FIC exhibits a 9.7% percentage of increase in PCE compared to the PM6:Y6 binary BHJ, which is one of the highest percentage increases among the reported ternary BHJs, showing the huge potential of BFD-2FIC for ternary BHJ OSCs.

An All-In-One Integrating Strategy for Designing Platinum(II)-Based Supramolecular Polymers for Photocatalytic Hydrogen Evolution

Organic polymer photocatalysts have achieved significant progress in photocatalytic hydrogen evolution, while developing the integrated organic polymers possessing the functions of photosensitizer, electron transfer mediator, and catalyst simultaneously is urgently needed and presents a great challenge. Considering that chalcogenoviologens are able to act as photosensitizers and electron-transfer mediators, a series of chalcogenoviologen-containing platinum(II)-based supramolecular polymers is designed, which exhibited strong visible light-absorbing ability and suitable bandgap for highly efficient photocatalytic hydrogen evolution without the use of a cocatalyst. The hydrogen evolution rate (HER) increases steadily with the decrease in an optical gap of the polymer. Among these "all-in-one" polymers, Se-containing 2D porous polymer exhibited the best photocatalytic performance with a HER of 3.09 mmol g-1 h-1 under visible light (>420 nm) irradiation. Experimental and theoretical calculations reveal that the distinct intramolecular charge transfer characteristics and heteroatom N in terpyridine unit promote charge separation and transfer within the molecules. This work could provide new insights into the design of metallo-supramolecular polymers with finely tuned components for photocatalytic hydrogen evolution from water.

Rational design of triazine-based conjugated polymers with enhanced charge separation ability for photocatalytic hydrogen evolution

Triazine-based conjugated polymers (TCPs) are promising organic catalysts for green H2 production, since their photocatalytic performance can be easily regulated via appropriate molecular design. However, apart from weak absorption of visible light, weak charge separation and transport abilities also considerably restrict the photocatalytic performance of TCPs. Herein, we report two novel TCP photocatalysts with donor-acceptor (D-A) and donor-π-acceptor (D-π-A) structures using dibenzo[g,p]chrysene (Dc), thiophene (T), and 2,4,6-triphenyl-1,3,5-triazine (Tz) as the donor, π-spacer, and acceptor, respectively. Compared to Dc-Tz with a D-A structure, Dc-T-Tz exhibits a broader light absorption edge and more efficient charge separation and transmission due to its D-π-A structure and strong dipole effect. These properties enable Dc-T-Tz to display a prominent H2 production rate of 45.13 mmol h-1 g-1 under ultraviolet-visible (UV-Vis) light (λ > 300 nm). Therefore, Dc-T-Tz represents state-of-the-art TCP photocatalysts to date.

Functionalized Linear Conjugated Polymer/TiO2 Heterojunctions for Significantly Enhancing Photocatalytic H2 Evolution

Conjugated polymers (CPs) have attracted much attention in recent years due to their structural abundance and tunable energy bands. Compared with CP-based materials, the inorganic semiconductor TiO2 has the advantages of low cost, non-toxicity and high photocatalytic hydrogen production (PHP) performance. However, studies on polymeric-inorganic heterojunctions, composed of D-A type CPs and TiO2, for boosting the PHP efficiency are still rare. Herein, an elucidation that the photocatalytic hydrogen evolution activity can actually be improved by forming polymeric-inorganic heterojunctions TFl@TiO2, TS@TiO2 and TSO2@TiO2, facilely synthesized through efficient in situ direct C-H arylation polymerization, is given. The compatible energy levels between virgin TiO2 and polymeric semiconductors enable the resulting functionalized CP@TiO2 heterojunctions to exhibit a considerable photocatalytic hydrogen evolution rate (HER). Especially, the HER of TSO2@TiO2 heterojunction reaches up to 11,220 μmol g-1 h-1, approximately 5.47 and 1260 times higher than that of pristine TSO2 and TiO2 photocatalysts. The intrinsic merits of a donor-acceptor conjugated polymer and the interfacial interaction between CP and TiO2 account for the excellent PHP activity, facilitating the separation of photo-generated excitons. Considering the outstanding PHP behavior, our work discloses that the coupling of inorganic semiconductors and suitable D-A conjugated CPs would play significant roles in the photocatalysis community.

Direct C-H Arylation Derived Ternary D-A Conjugated Polymers: Effects of Monomer Geometries, D/A Ratios, and Alkyl Side Chains on Photocatalytic Hydrogen Production and Pollutant Degradation

Donor-acceptor (D-A) conjugated polymer (CP) featuring high charge mobility and widely tunable energy bands have shown promising prospects in photocatalysis. In this work, a library of ternary D-A CPs (22 polymers) based on benzothiadiazole, bithiophene, and fluorene derivatives (i.e., fluorene [Fl], 9,9-dihexylfluorene [HF], and 9,9'-spirobifluorene [SF]) with and without alkyl side chains, and with 3D geometry are designed and synthesized via atom-economical direct C-H arylation polymerization to explore the synergetic effects of stereochemistry, D/A ratio, and alkyl chains on the properties and photocatalytic performances, which reveal that 1) the cross-shaped 3D spirobifluorene (SF) building block shows the highest hydrogen evolution rates (HER) owing to the sufficient photocatalytic active sites exposed, 2) the alkyl-free linear polymer (FlBtBT0.05 ) exhibit the highest photocatalytic pollutant degradation performance owing to its superior charge separation, and 3) the alkyl side chains are redundances that will exert detrimental effects on the aqueous photocatalysis owing to their insulating and hydrophobic property. The structure-property-performance correlation results obtained will provide a desirable guideline for the rational design of CP-based photocatalysts.

Photocatalytic Oxygen Evolution under Visible Light Mediated by Molecular Heterostructures

Due to their structural and property tunability, semiconductive conjugated polymers (CPs) have emerged as promising candidates for photocatalytic water splitting. Compared with inorganic materials, the photocatalytic performance of mono-component polymers was limited by the fast recombination of photoexcited charge carriers, and they always needed to catch up to expectations. To this end, researchers established molecular donor-acceptor heterostructures, which could notably promote oxygen production efficiency due to their more effective charge carrier separation. In this work, easy Schiff base reactions between side-chain -CHO groups and terminal -NH2 groups were used to introduce benzene and perylene diimide (PDI) into the molecular heterostructure to serve as electron donors (D) and electron acceptors (A). In particular, for the first time, we employed the molecular heterostructures of CPs to promote photocatalytic O2 production. One prepared molecular heterostructure was demonstrated to improve oxygen generation rate (up to 0.53 mmol g-1 h-1) through visible light-driven water splitting. Interestingly, based on the photoelectric properties, a stepwise two-electron/two-electron pathway constituted the photocatalytic mechanism for oxygen production with the molecular heterostructure. These results provide insights into designing and fabricating high-performance molecular heterostructures for photocatalytic oxygen production.

Effect of Controlling Thiophene Rings on D-A Polymer Photocatalysts Accessed via Direct Arylation for Hydrogen Production

Conjugated polymer photocatalysts for hydrogen production have the advantages of an adjustable structure, strong response in the visible light region, adjustable energy levels, and easy functionalization. Using an atom- and step-economic direct C-H arylation method, dibromocyanostilbene was polymerized with thiophene, dithiophene, terthiophene, and fused thienothiophene and dithienothiophene, respectively, to produce donor-acceptor (D-A)-type linear conjugated polymers containing different thiophene derivatives with different conjugation lengths. Among them, the D-A polymer photocatalyst constructed from dithienothiophene could significantly broaden the spectral response, with a hydrogen evolution rate up to 12.15 mmol h-1 g-1. The results showed that the increase in the number of fused rings on thiophene building blocks was beneficial to the photocatalytic hydrogen production of cyanostyrylphene-based linear polymers. For the unfused dithiophene and terthiophene, the increase in the number of thiophene rings enabled more rotation freedom between the thiophene rings and reduced the intrinsic charge mobility, resulting in lower hydrogen production performance accordingly. This study provides a suitable process for the design of electron donors for D-A polymer photocatalysts.

N,N'-octyl biphenothiazine and dibenzothiophene dioxide-based soluble porous organic polymer for biphasic photocatalytic hydrogen evolution

A donor-acceptor-based soluble porous organic polymer (PzDBS) was fabricated using a flexible core composed of N,N'-octyl biphenothiazine and a rigid building unit involving dibenzothiophene dioxide. The soluble porous organic polymer was explored for aqueous-organic biphasic photocatalytic hydrogen evolution, introducing a promising avenue in the domain of porous polymer photocatalysts.

Tunable Donor-Acceptor Linear Conjugated Polymers Involving Cyanostyrylthiophene Linkages for Visible-Light-Driven Hydrogen Production

In this paper, an atom- and step-economic direct C-H arylation polymerization (DArP) strategy was developed to access cyanostyrylthiophene (CST)-based donor-acceptor (D-A) conjugated polymers (CPs) used for photocatalytic hydrogen production (PHP) from water reduction. The new CST-based CPs CP1-CP5 with varied building blocks were systematically studied by X-ray single-crystal analysis, FTIR, scanning electron microscopy, UV-vis, photoluminescence, transient photocurrent response, cyclic voltammetry measurements, and a PHP test, which showed that the phenyl-cyanostyrylthiophene-based CP3 exhibits a superior hydrogen evolution rate (7.60 mmol h^-1 g^-1) compared to other conjugated polymers. The structure-property-performance correlation results obtained in this study will provide an important guideline for the rational design of high-performance D-A CPs for PHP applications.

Structure-Property Relationship of Cyano-Functionalized Conjugated Polymers for Photocatalytic Hydrogen Production

Conjugated polymers (CPs) have garnered increasing attention in the field of photocatalysis due to their stability and molecular tunability. Understanding the structure-property relationship in CPs and addressing appropriate molecular design strategies are pivotal to improving the photocatalytic performance of CPs. Herein, a new efficient cyano (CN) engineering approach was proposed to promote the photocatalytic performance of CPs, and three representative CP-based photocatalysts with different CN contents were tailor-made to investigate the relationship between CN functionalization and photocatalytic activity. A series of systematically experimental and theoretical studies reveal that CN functionalization contributes to strengthening the donor-acceptor (D-A) interaction, enhancing the light absorption ability, charge separation/transfer efficiency, and hydrophilicity of CPs, and also facilitating the output of separated photoinduced electrons from CPs to Pt cocatalyst. Thus, the dicyano-functionalized polymer (P-2CN) manifests an attractive photocatalytic performance in hydrogen production. This study provides a facile strategy to develop excellent CP-based photocatalysts for solar fuel production.

Carbazole and Diketopyrrolopyrrole-Based D-A π-Conjugated Oligomers Accessed via Direct C-H Arylation for Opto-Electronic Property and Performance Study

Five carbazole and diketopyrrolopyrrole-based donor-acceptor (D-A) new π-conjugated oligomers (π-COs) with gradually elongated lengths are facilely synthesized via a single pot of direct C-H arylation with merits of atom- and step-economy. The structure-property-performance correlations of these π-COs and their parent polymer are studied in detail by opto-electronic characterizations and bulk heterojunction (BHJ) organic photovoltaic (OPV) devices. It is found that the π-COs having longer lengths enable better performance in OPVs owing to the enhanced intermolecular interaction with the elongation of the conjugations. The above results not only highlight the powerful synthetic strategy here provided, but also reveal that π-COs with unique properties might find promising application in OPVs.

Impact of Interfaces, and Nanostructure on the Performance of Conjugated Polymer Photocatalysts for Hydrogen Production from Water

The direct conversion of sunlight into hydrogen through water splitting, and by converting carbon dioxide into useful chemical building blocks and fuels, has been an active area of research since early reports in the 1970s. Most of the semiconductors that drive these photocatalytic processes have been inorganic semiconductors, but since the first report of carbon nitride organic semiconductors have also been considered. Conjugated materials have been relatively extensively studied as photocatalysts for solar fuels generation over the last 5 years due to the synthetic control over composition and properties. The understanding of materials' properties, its impact on performance and underlying factors is still in its infancy. Here, we focus on the impact of interfaces, and nanostructure on fundamental processes which significantly contribute to performance in these organic photocatalysts. In particular, we focus on presenting explicit examples in understanding the interface of polymer photocatalysts with water and how it affects performance. Wetting has been shown to be a clear factor and we present strategies for increased wettability in conjugated polymer photocatalysts through modifications of the material. Furthermore, the limited exciton diffusion length in organic polymers has also been identified to affect the performance of these materials. Addressing this, we also discuss how increased internal and external surface areas increase the activity of organic polymer photocatalysts for hydrogen production from water.

Synthesis characterization of Zn-based MOF and their application in degradation of water contaminants

Metal-organic frameworks (MOFs) are currently popular porous materials with research and application value in various fields such as medicine and engineering. Aiming at the application of MOFs in photocatalysis, this paper mainly reviews the main synthesis methods of ZnMOFs and the latest research progress of Zn MOF-based photocatalysts to degrade organic pollutants in water, such as organic dyes. This nanomaterial is being used to treat wastewater and has proven to be very efficient because of its exceptionally large surface area and porous nature. The results show that Zn-MOFs are capable of high degradation of the above pollutants and over 90% of degradation was observed in publications. In addition, the reusability percentage was examined and studies showed that the Zn-MOF nanostructure has very good stability and can continue to degrade a high percentage of pollutants after several cycles. This review focuses on Zn-MOFs and their composites. First, the methods of synthesis and characterization of these compounds are given. Finally, the application of these composites in the process of photocatalytic degradation of dye pollutants such as methylene blue, methyl orange, crystal violet, rhodamine B, etc. is explained.

Why Do Sulfone-Containing Polymer Photocatalysts Work So Well for Sacrificial Hydrogen Evolution from Water?

Many of the highest-performing polymer photocatalysts for sacrificial hydrogen evolution from water have contained dibenzo[b,d]thiophene sulfone units in their polymer backbones. However, the reasons behind the dominance of this building block are not well understood. We study films, dispersions, and solutions of a new set of solution-processable materials, where the sulfone content is systematically controlled, to understand how the sulfone unit affects the three key processes involved in photocatalytic hydrogen generation in this system: light absorption; transfer of the photogenerated hole to the hole scavenger triethylamine (TEA); and transfer of the photogenerated electron to the palladium metal co-catalyst that remains in the polymer from synthesis. Transient absorption spectroscopy and electrochemical measurements, combined with molecular dynamics and density functional theory simulations, show that the sulfone unit has two primary effects. On the picosecond timescale, it dictates the thermodynamics of hole transfer out of the polymer. The sulfone unit attracts water molecules such that the average permittivity experienced by the solvated polymer is increased. We show that TEA oxidation is only thermodynamically favorable above a certain permittivity threshold. On the microsecond timescale, we present experimental evidence that the sulfone unit acts as the electron transfer site out of the polymer, with the kinetics of electron extraction to palladium dictated by the ratio of photogenerated electrons to the number of sulfone units. For the highest-performing, sulfone-rich material, hydrogen evolution seems to be limited by the photogeneration rate of electrons rather than their extraction from the polymer.

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling

This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki-Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru³⁺ to RuO_2, and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP-3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H₂ × g_COP-3^-1 after 3 h irradiation.

New highly efficient 2D/1D HAp/g‒C3N4 photocatalyst thin film insight into crystal orientation and C‒vacancy effects

The novel synthetic Sol‒EPD process of a thin film including of well decorated g‒C₃N₄ nanotubes on plate‒like hydroxyapatite (HAp) were applied. Using Sol‒EPD designable method anisotropic growth of HAp nanocrystals on the substrate were achieved. It has provided the orientation of the different crystal facets resulted in the photogenerated O‒vacancy from phosphate groups. Based on the studied XRD pattern, EPD deposited film of HAp was oriented along c‒plane that can improve the photocatalytic activity of the designed composited film. Systematic designing was applied for decoration of g‒C₃N₄ nanotubes on the HAp under thermal condensation of melamine coincide with calcination of HAp. This new designed HAp/g‒C₃N₄ nanofilm was shown high photocatalytic efficiency and completely degradation of persistent pollutant of 4‒nitrophenol in the aqueous solution. According to the electrochemical impedance spectroscopy and current density studies, the higher charge separation/low charge recombination results were obtained for composited g‒C₃N₄/HAp nano‒film comparing with the single films of HAp and urchin like g‒C₃N₄. This high separation of charge pairs should be also assigned to the special designed morphology. In addition, wrapped like structure of g‒C₃N₄ nanotubes with C‒vacancy around HAp nanoplates play key role in separation of photo‒induced charge pairs, light diffusion, and high light harvesting within hollow nanotube. It can be highlighted that the composite degraded more than 95% of 4‒nitrophenol during 90 min that after 5 runs the photocatalytic activity was not significantly changed.

C-H Direct Arylation: A Robust Tool to Tailor the π-Conjugation Lengths of Non-Fullerene Acceptors

Facile synthesis without involvement of toxic reagents is of great significance in the practical application of photovoltaic materials. In this work, four acceptor-donor-acceptor (A-D-A) type unfused-ring acceptors (UFRAs) with stepwise extension in π-conjugation, i. e., CPFB-IC-n (n=1-4), involving cyclopentadithiophene (CPDT) and 1,4-difluorobenzene (DFB) as cores, are facilely synthesized by an atom-, step-economic and labor-saving method through direct arylation of C-H bond (DACH). Among them, CPFB-IC-4 has the longest conjugation lengths among the molecular UFRA ever reported. The dependence of optoelectronic properties and photovoltaic performances of CPFB-IC-n (n=1-4) on conjugation length were systematically investigated. CPFB-IC-2 with near zero highest occupied molecular orbital (HOMO) offsets (ΔE_HOMO =0.06 eV) achieves the highest power conversion efficiency (PCE), due to the significantly enhanced open voltage (V_OC ) and short current (J_SC ) caused by the balanced frontier molecular orbitals (FMOs) and complementary light absorption. Our work demonstrates that the optical properties and FMOs of UFRAs can be finely tuned by the stepwise elongation of conjugation lengths. Meanwhile, DACH coupling as a powerful tool here established will be a promising candidate for synthesizing high-performance oligomeric UFRAs.

Pot- and atom-economic synthesis of oligomeric non-fullerene acceptors via C–H direct arylation

Three long-chain oligomeric acceptors with a stepwise increase in conjugation length are obtained via three successive one-pot reactions and a systematic structure–property–performance relationship study was carried out.

Tunable cyano substituents in D–A conjugated polymers accessed via direct arylation for photocatalytic hydrogen production

A library of STP-based CP photocatalysts with –CN groups at varied positions were designed and facilely synthesized by an atom- and step-economic one-component direct arylation polymerization for a structure–property–performance correlation study.