Fluorescent supramolecular polymers of barbiturate dyes with thiophene-cored twisted π-systems

Alkyl-π Functional Molecular Gels: Control of Elastic Modulus and Improvement of Electret Performance

The development of optoelectronically-active soft materials is drawing attention to the application of soft electronics. A room-temperature solvent-free liquid obtained by modifying a π-conjugated moiety with flexible yet bulky alkyl chains is a promising functional soft material. Tuning the elastic modulus (G') is essential for employing optoelectronically-active alkyl-π liquids in deformable devices. However, the range of G' achieved through the molecular design of alkyl-π liquids is limited. We report herein a method for controlling G' of alkyl-π liquids by gelation. Adding 1 wt % low-molecular-weight gelator formed the alkyl-π functional molecular gel (FMG) and increased G' of alkyl-π liquids by up to seven orders of magnitude while retaining the optical properties. Because alkyl-π FMGs have functional π-moieties in the gel medium, this new class of gels has a much higher content of π-moieties of up to 59 wt % compared to conventional π-gels of only a few wt %. More importantly, the gel state has a 23 % higher charge-retention capacity than the liquid, providing better performance in deformable mechanoelectric generator-electret devices. The strategy used in this study is a novel approach for developing next-generation optoelectronically-active FMG materials.

Pathway Selection in Temporal Evolution of Supramolecular Polymers of Ionic π-Systems: Amphiphilic Organic Solvent Dictates the Fate of Water

Understanding solvent-solute interactions is essential to designing and synthesising soft materials with tailor-made functions. Although the interaction of the solute with the solvent mixture is more complex than the single solvent medium, solvent mixtures are exciting to unfold several unforeseen phenomena in supramolecular chemistry. Here, we report two unforeseen pathways observed during the hierarchical assembly of cationic perylene diimides (cPDIs) in water and amphiphilic organic solvent (AOS) mixtures. When the aqueous supramolecular polymers (SPs) of cPDIs are injected into AOS, initially kinetically trapped short SPs are formed, which gradually transform into thermodynamically stable high aspect ratio SP networks. Using various experimental and theoretical investigations, we found that this temporal evolution follows two distinct pathways depending on the nature of the water-AOS interactions. If the AOS is isopropanol (IPA), water is released from cPDIs into bulk IPA due to strong hydrogen bonding interactions, which further decreases the monomer concentration of cPDIs (Pathway-1). In the case of dioxane AOS, cPDI monomer concentration further increases as water is retained among cPDIs (Pathway-2) due to relatively weak interactions between dioxane and water. Interestingly, these two pathways are accelerated by external stimuli such as heat and mechanical agitation.

Impact of Ring-Closing on the Photophysical Properties of One-Dimensional π-Conjugated Molecular Aggregate

The self-assembled state of molecules plays a pivotal role in determining how inherent molecular properties transform and give rise to supramolecular functionalities and has long attracted attention. However, understanding the influence of morphologies spanning the nano- to mesoscopic scales of supramolecular assemblies derived from identical intermolecular interactions has been notoriously challenging due to dynamic structural change and monomer exchange of assemblies in solution. In this study, we demonstrate that curved one-dimensional molecular assemblies (supramolecular polymers) of lengths of around 70-200 nm, originating from the same luminescent molecule, exhibit distinct photoluminescent properties when they form closed circular structures (toroids) versus when they possess chain termini in solution (random coils). By exploiting the difference in kinetic stability between the toroids and random coils, we developed a dialysis protocol to selectively purify the former. It was revealed that these terminus-free closed structures manifest higher energy and more efficient luminescence compared with their mixed state with random coils. Time-resolved fluorescence measurements unveiled that random coils, due to their dynamic structural fluctuation in solution, generate local defects throughout the main chain, leading to luminescence from lower energy levels. In mixtures of the two assemblies, luminescence was exclusively observed from such a lower energy level of random coils, a result attributed to energy transfer between the assemblies. This work emphasizes that for identical supramolecular assemblies, only averaged properties have traditionally been considered, but their structures at the nano- to mesoscopic scale are important especially if they have a certain degree of shape persistency even in solution.

Two-Dimensional Supramolecular Polymerization of a Bis-Urea Macrocycle into a Brick-Like Hydrogen-Bonded Network

We report on a dendronized bis-urea macrocycle 1 self-assembling via a cooperative mechanism into two-dimensional (2D) nanosheets formed solely by alternated urea-urea hydrogen bonding interactions. The pure macrocycle self-assembles in bulk into one-dimensional liquid-crystalline columnar phases. In contrast, its self-assembly mode drastically changes in CHCl3 or tetrachloroethane, leading to 2D hydrogen-bonded networks. Theoretical calculations, complemented by previously reported crystalline structures, indicate that the 2D assembly is formed by a brick-like hydrogen bonding pattern between bis-urea macrocycles. This assembly is promoted by the swelling of the trisdodecyloxyphenyl groups upon solvation, which frustrates, due to steric effects, the formation of the thermodynamically more stable columnar macrocycle stacks. This work proposes a new design strategy to access 2D supramolecular polymers by means of a single non-covalent interaction motif, which is of great interest for materials development.

2-Amino-5-methylene-pyrimidine-4,6-dione-based Janus G-C nucleobase as a versatile building block for self-assembly

This communication reports a nature-inspired Janus G-C nucleobase featuring two recognition sites: DDA (G mimic) and DAA (C mimic), which is capable of forming a linear tape-like supramolecular polymer structure. As demonstrated herein, the amino group of this self-assembling system can be further modified to yield a highly stable quadruple H-bonding system as well as a masked self-assembling system cleavable upon exposure to light.

Piezo-Responsive Hydrogen-Bonded Frameworks Based on Vanillin-Barbiturate Conjugates

A concept of piezo-responsive hydrogen-bonded π-π-stacked organic frameworks made from Knoevenagel-condensed vanillin–barbiturate conjugates was proposed. Replacement of the substituent at the ether oxygen atom of the vanillin moiety from methyl (compound 3a) to ethyl (compound 3b) changed the appearance of the products from rigid rods to porous structures according to optical microscopy and scanning electron microscopy (SEM), and led to a decrease in the degree of crystallinity of corresponding powders according to X-ray diffractometry (XRD). Quantum chemical calculations of possible dimer models of vanillin–barbiturate conjugates using density functional theory (DFT) revealed that π-π stacking between aryl rings of the vanillin moiety stabilized the dimer to a greater extent than hydrogen bonding between carbonyl oxygen atoms and amide hydrogen atoms. According to piezoresponse force microscopy (PFM), there was a notable decrease in the vertical piezo-coefficient upon transition from rigid rods of compound 3a to irregular-shaped aggregates of compound 3b (average values of d₃₃ coefficient corresponded to 2.74 ± 0.54 pm/V and 0.57 ± 0.11 pm/V), which is comparable to that of lithium niobate (d₃₃ coefficient was 7 pm/V).

One-Pot Synthesis of Push–Pull Butadienes from 1,3-Diethyl-2-thiobarbituric Acid and Propargylic Alcohols

A new synthetic procedure for obtaining two previously reported donor-acceptor butadiene dyes, namely 5-(3,3-bis(4-methoxyphenyl)allylidene)-1,3-diethyl-2-thioxodihydropyrimidine-4,6(1H,5H)-dione and 5-(3,3-bis(4-(dimethylamino)phenyl)allylidene)-1,3-diethyl-2-thioxodihydropyrimidine-4,6(1H,5H)-dione, based on the InCl3-catalyzed coupling 1,3-diethyl-2-thiobarbituric acid with 1,1-bis(4-methoxyphenyl)prop-2-yn-1-ol and 1,1-bis(4-(dimethylamino)phenyl)prop-2-yn-1-ol, respectively, is presented. The reactions, which cleanly proceed in water under MW irradiation, involve the initial generation of the corresponding enals by Meyer-Schuster rearrangement of the alkynols and their subsequent Knoevenagel condensation with the 2-thiobarbituric acid derivative. By following the same approach, the novel butadiene 5-(3,3-bi([1,1′-biphenyl]-4-yl)allylidene)-1,3-diethyl-2-thioxodihydropyrimidine-4,6(1H,5H)-dione, which was characterized by 1H and 13C{1H} NMR, IR, UV-Vis, elemental analysis and HRMS, was synthesized in 79% yield.

Crystallization-Driven Controlled Two-Dimensional (2D) Assemblies from Chromophore-Appended Poly(L-lactide)s: Highly Efficient Energy Transfer on a 2D Surface

A rational approach towards precision two-dimensional (2D) assemblies by crystallization-driven self-assembly (CDSA) of poly(L-lactides) (PLLAs), end-capped with dipolar dyes like merocyanine (MC) or naphthalene monoimide (NMI) and hydrophobic pyrene (PY) or benzene (Bn) is described. PLLA chains crystallize into diamond-shaped platelets in isopropanol, which forces the terminal dyes to assemble into a 2D array on the platelet surface by either dipolar interactions or π-stacking and exhibit tunable emission. Dipolar dyes play a critical role in imparting colloidal stability and structural uniformity to the 2D crystals, which is partly compromised for hydrophobic ones. Co-crystallization between NMI- and PY-labeled PLLAs yields similar diamond-shaped co-platelets with highly efficient (≈80 %) Förster Resonance Energy Transfer on the 2D surface. Further, the "living" CDSA method confers enlarged, segmented block co-platelets using one of the homopolymers as "seed" and the other as "unimer".

Supramolecular polymerization of thiobarbituric acid naphthalene dye

2-Thiobarbituric acid-functionalized naphthalene dye selectively self-assembles into crystalline fibers to show material properties that are different from those of a previously reported oxo-barbituric acid derivative affording curved supramolecular polymers via...