Photochemical weathering of polyurethane microplastics produced complex and dynamic mixtures of dissolved organic chemicals

Designing for degradation: the importance of considering biotic and abiotic polymer degradation

Considering the increasing global plastic demand, there is a critical need to gain insight into environmental processes that govern plastic degradation in order to inform novel design of sustainable polymers. Current biological degradation testing standards focus on formation of CO2 (i.e., mineralization) alone as a diagnostic, ultimately limiting identification of structure-degradation relationships in a timely fashion. This work developed a sequential abiotic (i.e., photodegradation and hydrolysis) and biotic degradation test and applied it to a suite of 18 polymers, including ten lab produced, novel polyhydroxyalkanoate polyesters, and eight commercially available, bio-based (i.e., polylactic acid and poly-3-hydroxybutyrate) and fossil-derived (i.e., polystyrene, polypropylene, low density polyethylene, poly(ethylene terephthalate) and tire rubber) polymers. Biomineralization alone following standard methods (i.e., ASTM 6691-17, ISO 23977-1 2020) underestimated polymer degradation up to two-fold over 28 days. Simulated sunlight enhanced the overall polymer degradation by mobilizing dissolved organic carbon (DOC). After photoirradiation, up to 100% of released dissolved organic carbon was bioavailable for marine microbes over 14 days. Photodegradation and hydrolysis could be explained by structural drivers in the commodity polymers, and the lab-synthesized polymers illustrated a limit to total degradation beyond which no enhancements in degradation were achieved. Taken together, this workflow allows for relatively fast experimental determination of environmentally relevant stimuli to help support eventual elucidation of structure-property relationships for enhanced a priori design of degradable polymers.

A Comprehensive Study on the Degradation Behavior and Mechanism of Expanded Thermoplastic Polyurethane

Expanded thermoplastic polyurethane (ETPU) is used in a wide range of applications due to its excellent properties, but inevitably, aging deteriorates the material properties and shortens service lifetime. This study conducted aging experiments on ETPU to summarize the deterioration trend and provide reliable data. The ETPU underwent three distinct aging protocols: thermal aging for 28 days in a controlled 80 °C environment; xenon lamp aging under continuous UV irradiation (via xenon lamp) at 80 °C for 28 days; and weathering aging through 671 days of outdoor exposure to real-world weather conditions. After various structural characterization and performance tests on the aged ETPUs, the results showed that thermal aging is not the key factor causing the aging of ETPU; the internal structure of ETPU is damaged and the performance rapidly deteriorates under the combined effect of light, heat, and humidity. The special heterogeneous structure gives the sample different internal aging characteristics, and the bead interface becomes a defective site after aging, affecting the overall mechanical properties of the material. In the natural state, the lifetime of ETPU is about two years. Our work will provide valuable data for the study of the aging properties of ETPU and contribute to the prediction of the lifetime of the material.

Interaction of Microplastics with Emerging Organic Pollutants: A Study on Atrazine Adsorption and Phytotoxicity

The adsorption of atrazine (ATZ) onto pristine and aged polyethylene microplastics (MPs) was investigated in distilled water (DW) and hydroponic nutrient-enriched water (EW) to evaluate its phytotoxic effects on Lactuca sativa germination. Aged microplastics (AMPs) exhibited higher ATZ adsorption in both conditions: 0.646 mg/g (14.49%) in DW and 0.742 mg/g (15.87%) in EW, compared to 0.405 mg/g (9.08%) and 0.504 mg/g (10.78%) for pristine microplastics (PMPs), respectively. This increase was attributed to photodegradation-induced surface modifications on MP, including increased roughness and the formation of oxygenated functional groups. The phytotoxicity assays showed that ATZ adsorbed onto AMPs inhibited seed germination more severely, with a maximum inhibition of 34% at 2 mg/L, evidencing that microplastic aging enhances ATZ adsorption and increases toxicity risks in aquatic environments, particularly under eutrophic conditions. The combined presence of MP and ATZ resulted in greater toxicity, attributed to a synergistic effect, as observed in dry and wet mass inhibition. These findings indicate that pollutant interactions amplify negative impacts on plant development. Furthermore, ATZ primarily affects root growth through direct physical contact with MP rather than via desorption into water.

Effects of UV light on physicochemical changes in thermoplastic polyurethanes: Mechanism and disinfection byproduct formation

The presence of microplastics (MPs) products and particles in the environment can significantly impact the human body. Most MPs that enter the environment also enter the water cycle. During sunlight light irradiation (especially ultraviolet (UV) part) or UV disinfection, many of these MPs, particularly those rich in surface functional groups like thermoplastic polyurethanes (TPU), undergo physicochemical changes that can affect the formation of disinfection byproducts (DBPs). This study investigates the physicochemical changes of TPU in water after exposure to UV irradiation and incubation in the dark, as well as the formation of DBPs after chlorination. The results show that TPU undergo chain breakage, oxidation, and cross-linking when exposed to UV irradiation in an aqueous system. This leads to fragmentation into smaller particles, which facilitates the synthesis of DBPs. Subsequent research has demonstrated that the TPU leaching solution produces a significantly higher DBP content than the chlorination of TPU MPs, particularly at high concentrations of CHCl3. Therefore, it is important to give greater consideration to the soluble DBP precursors released by TPU.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Tracking Dynamic Chemical Reactivity Networks with High-Resolution Mass Spectrometry: A Case of Microplastic-Derived Dissolved Organic Carbon

Chemical degradation testing often involves monitoring the loss of a chemical or the evolution of a single diagnostic product through time. Here, we demonstrate a novel approach to tracing complex degradation networks using mass-spectrometry-based methods and open cheminformatics tools. Ester- and ether-based thermoplastic polyurethane (TPU_Ester and TPU_Ether) microplastics (350 μm) and microplastics-derived dissolved organic carbon (MP-DOC) were photoweathered in a simulated marine environment and subsequently analyzed by liquid chromatography coupled to high-resolution mass spectrometry. We formula-annotated 1342 and 2344 unique features in the MP-DOC of TPU_Ester and TPU_Ether, respectively. From these, we extracted 199 and 568 plausible parent-transformation product pairs via matching of features (a) with complementary increasing and decreasing trends (Spearman's correlation coefficient between normalized intensity and time), (b) spectral similarities of at least three accurate mass MS2 fragments, and (c) at least 3 ppm agreement between the theoretical and measured change in m/z between the parent-transformation product formula. Molecular network analysis revealed that both chain scission and cross-linking reactions occur dynamically rather than degradation proceeding in a monotonic progression to smaller or more oxygenated structures. Network nodes with the highest degree of centrality were tentatively identified using in silico fragmentation and can be prioritized for toxicity screening or other physicochemical properties of interest. This work has important implications for chemical transformation tracking in complex mixtures and may someday enable improved elucidation of environmental transformation rules (i.e., structure-reactivity relationships) and fate modeling.

Toxic effects of aging mask microplastics on E. coli and dynamic changes in extracellular polymeric matter

Contamination of disposable medical masks has become a growing problem globally in the wake of Covid-19 due to their widespread use and improper disposal. Three different mask layers, namely the outer layer, the meltblown (MB) filler layer and the inner layers release three different types of microplastics, whose physical and chemical properties change after prolonged environmental weathering. In this study, physical and chemical changes of mask microplastics before and after aging were characterized by different characterization techniques. The toxic effect and mechanism of aged mask microplastics on Escherichia coli (E. coli) were studied by measuring the growth inhibition of mask microplastics, the change in ATPase activity, the change in malondialdehyde content and reactive oxygen species production, and the release of the chemical composition of exopolymeric substances (EPS). The microplastics of the aged MB filter layer had the most significant inhibitory effect on E. coli growth, reaching 19.2 % after 36 h. Also, under the influence of mask microplastics, ATPase activity of E. coli was inhibited and a large amount of EPS was released. The chemical composition of EPS has also changed. This study proposed the possible toxicity mechanism of mask microplastics and the self-protection mechanism of E. coli, and provided a reference for future research on the toxic effects of mask microplastics on environmental organisms.

Computational models to confront the complex pollution footprint of plastic in the environment

The threat posed by plastic in the environment is poorly characterized due to uncertainties and unknowns about sources, transport, transformation and removal processes, and the properties of the plastic pollution itself. Plastic creates a footprint of particulate pollution with a diversity of composition, size and shape, and a halo of chemicals. In this Perspective, we argue that process-based mass-balance models could provide a platform to synthesize knowledge about plastic pollution as a function of its measurable intrinsic properties.

Formulation Controls the Potential Neuromuscular Toxicity of Polyethylene Photoproducts in Developing Zebrafish

Sunlight transforms plastic into water-soluble products, the potential toxicity of which remains unresolved, particularly for vertebrate animals. We evaluated acute toxicity and gene expression in developing zebrafish larvae after 5 days of exposure to photoproduced (P) and dark (D) leachates from additive-free polyethylene (PE) film and consumer-grade, additive-containing, conventional, and recycled PE bags. Using a "worst-case" scenario, with plastic concentrations exceeding those found in natural waters, we observed no acute toxicity. However, at the molecular level, RNA sequencing revealed differences in the number of differentially expressed genes (DEGs) for each leachate treatment: thousands of genes (5442 P, 577 D) for the additive-free film, tens of genes for the additive-containing conventional bag (14 P, 7 D), and none for the additive-containing recycled bag. Gene ontology enrichment analyses suggested that the additive-free PE leachates disrupted neuromuscular processes via biophysical signaling; this was most pronounced for the photoproduced leachates. We suggest that the fewer DEGs elicited by the leachates from conventional PE bags (and none from recycled bags) could be due to differences in photoproduced leachate composition caused by titanium dioxide-catalyzed reactions not present in the additive-free PE. This work demonstrates that the potential toxicity of plastic photoproducts can be product formulation-specific.

Metal-organic frameworks and plastic: an emerging synergic partnership

Mismanagement of plastic waste results in its ubiquitous presence in the environment. Despite being durable and persistent materials, plastics are reduced by weathering phenomena into debris with a particle size down to nanometers. The fate and ecotoxicological effects of these solid micropollutants are not fully understood yet, but they are raising increasing concerns for the environment and people's health. Even if different current technologies have the potential to remove plastic particles, the efficiency of these processes is modest, especially for nanoparticles. Metal-organic frameworks (MOFs) are crystalline nano-porous materials with unique properties, have unique properties, such as strong coordination bonds, large and robustus porous structures, high accessible surface areas and adsorption capacity, which make them suitable adsorbent materials for micropollutants. This review examines the preliminary results reported in literature indicating that MOFs are promising adsorbents for the removal of plastic particles from water, especially when MOFs are integrated in porous composite materials or membranes, where they are able to assure high removal efficiency, superior water flux and antifouling properties, even in the presence of other dissolved co-pollutants. Moreover, a recent trend for the alternative preparation of MOFs starting from plastic waste, especially polyethylene terephthalate, as a sustainable source of organic linkers is also reviewed, as it represents a promising route for mitigating the impact of the costs deriving from the widescale MOFs production and application. This connubial between MOFs and plastic has the potential to contribute at implementing a more effective waste management and the circular economy principles in the polymer life cycle.