Novel MOF-derived 3D hierarchical needlelike array architecture with excellent EMI shielding, thermal insulation and supercapacitor performance

Organic Porous Materials and Their Nanohybrids for Next-Generation Thermoelectric Application

Thermoelectricity offers a promising solution for reducing carbon emissions by efficiently converting waste heat into electrical energy. However, high-performance thermoelectric materials predominantly consist of rare, toxic, and costly inorganic compounds. Therefore, the development of alternating material systems for high-performance thermoelectric materials is crucial for broader applications. A significant challenge in this field is the strong interdependence of the various thermoelectric parameters, which complicates their simultaneous optimization. Consequently, the methods for decoupling these parameters are required. In this respect, composite technology has emerged as an effective strategy that leverages the advantages of diverse components to enhance the overall performance. After elaborating on the fundamental concepts of thermoelectricity and the challenges in enhancing the thermoelectric performance, the present review provides a comparative analysis of inorganic and organic materials and explores various methods for decoupling the thermoelectric parameters. In addition, the benefits of composite systems are emphasized and a range of low thermal conductivity materials with microporous to macroporous structures are introduced, highlighting their potential thermoelectric applications. Furthermore, the current development obstacles are discussed, and several cutting-edge studies are highlighted, with a focus on the role of high electrical conductivity fillers in enhancing the performance and mechanical properties. Finally, by combining low thermal conductivity materials with high electrical conductivity fillers can achieve superior thermoelectric performance. These insights are intended to guide future research and development in the field of organic porous materials and their nanohybrids in order to promote more sustainable and efficient energy solutions.

Recent development of metal-organic frameworks and their composites in electromagnetic wave absorption and shielding applications

With the rapid development of information and communication industries, the usage of electromagnetic waves has caused the hazard of human health and misfunction of devices. The adsorption and shielding of electromagnetic waves have been achieved in various materials. The unique adjustable spatial structure makes metal-organic frameworks (MOFs) promising for electromagnetic shielding and adsorbing. As MOFs research advances, various large-scale MOF-based materials have been developed. For instance, MOFs spatial structure has been expanded from 2D to 3D to load more ligands. Progress in synthetic methods for MOFs and their derivatives is advancing, with priority on large-scale preparation and green synthesis. This review summarizes the methods for synthesizing MOFs and their derivatives, and explores the effects of MOFs spatial structure on electromagnetic interference (EMI) shielding and electromagnetic wave absorption capabilities. At the same time, detailed examples are used to focus on the applications of five different MOFs composites in electromagnetic shielding and electromagnetic wave absorption. Finally, the current challenges and prospects of MOFs in the electromagnetic field are introduced, providing a useful reference for the preparation and design of MOFs and their composites for electromagnetic wave processing applications.

A Multi-Interface Structure of Graphdiyne/Cobalt Oxides for Chlorine Production

A challenge facing the chlor-alkali process is the lack of electrocatalyst with high activity and selectivity for the efficient industrial production of chlorine. Herein the authors report a new electrocatalyst that can generate multi-interface structure by in situ growth of graphdiyne on the surface of cobalt oxides (GDY/Co3O4), which shows great potential in highly selective and efficient chlorine production. This result is due to the strong electron transfer and high density charge transport between GDY and Co3O4 and the interconversion of the mixed valence states of the Co atoms itself. These intrinsic characteristics efficiently enhance the conductivity of the catalyst, facilitate the reaction kinetics, and improve the overall catalytic selectivity and activity. Besides, the protective effect of the formed GDY layer is remarkable endowing the catalyst with excellent stability. The catalyst can selectively produce chlorine in low-concentration of NaCl aqueous solution at room temperature and pressure with the highest Faraday efficiency of 80.67% and an active chlorine yield rate of 184.40 mg h-1 cm-2, as well as superior long-term stability.

Morphology regulation of conductive metal-organic frameworks in situ grown on graphene oxide for high-performance supercapacitors

In this work, nickel-catecholate (Ni-CAT) nanorods were in situ compounded on graphene oxide (GO) to form a composite Ni-CAT@GO (NCG) with a special "blanket-shape" structure, which was used as an electrode material for supercapacitors. The morphology of Ni-CATs in situ grown on GO was modulated by introducing various contents of GO. With increasing GO, the length of nanorods of Ni-CATs is obviously shortened, and the charge transfer resistance of NCG is significantly reduced as the GO content is relatively low while it increases with further addition of GO, because excessive GO in NCG results in smaller crystal sizes accompanied by smaller stacking pores. Both the over-long Ni-CAT nanorods and the smaller stacking pores can restrict the accessible surface areas for the electrolyte. Optimal nanorod sizes are crucial to achieve good electrochemical performance for electrode materials. Galvanostatic charge-discharge analysis of NCG electrodes shows that their capacity initially increases and then decreases with the addition of more and more GO, and Ni-CAT@GO-0.5 (NCG0.5) with minimal charge transfer resistance exhibits the best electrochemical performance. The results demonstrate that the NCG0.5 electrode with optimal morphology possesses an excellent capacitance of 563.8 F g-1 at 0.5 A g-1 and a good rate performance of 61.9% at 10 A g-1, indicating that Ni-CAT@GO is a new type of promising electrode material for supercapacitors based on conductive metal-organic frameworks.

A Comprehensive Review of Electromagnetic Interference Shielding Composite Materials

The interaction between matter and microwaves assumes critical significance due to the ubiquity of wireless communication technology. The selective shielding of microwaves represents the only way to achieve the control on crucial technological sectors. The implementation of microwave shielding ensures the proper functioning of electronic devices. By preventing electromagnetic pollution, shielding safeguards the integrity and optimal performances of devices, contributing to the reliability and efficiency of technological systems in various sectors and allowing the further step forwards in a safe and secure society. Nevertheless, the microwave shielding research is vast and can be quite hard to approach due to the large number and variety of studies regarding both theory and experiments. In this review, we focused our attention on the comprehensive discussion of the current state of the art of materials used for the production of electromagnetic interference shielding composites, with the aim of providing a solid reference point to explore this research field.

From VIB- to VB-Group Transition Metal Disulfides: Structure Engineering Modulation for Superior Electromagnetic Wave Absorption

The laminated transition metal disulfides (TMDs), which are well known as typical two-dimensional (2D) semiconductive materials, possess a unique layered structure, leading to their wide-spread applications in various fields, such as catalysis, energy storage, sensing, etc. In recent years, a lot of research work on TMDs based functional materials in the fields of electromagnetic wave absorption (EMA) has been carried out. Therefore, it is of great significance to elaborate the influence of TMDs on EMA in time to speed up the application. In this review, recent advances in the development of electromagnetic wave (EMW) absorbers based on TMDs, ranging from the VIB group to the VB group are summarized. Their compositions, microstructures, electronic properties, and synthesis methods are presented in detail. Particularly, the modulation of structure engineering from the aspects of heterostructures, defects, morphologies and phases are systematically summarized, focusing on optimizing impedance matching and increasing dielectric and magnetic losses in the EMA materials with tunable EMW absorption performance. Milestones as well as the challenges are also identified to guide the design of new TMDs based dielectric EMA materials with high performance.

Metal-Organic Framework-Manipulated Dielectric Genes Inside Silicon Carbonitride toward Tunable Electromagnetic Wave Absorption

Heterointerface engineering for different identifiable length scales has emerged as a key research area for obtaining materials capable of high-performance electromagnetic wave absorption; however, achieving controllable architectural and compositional complexity in nanomaterials with environmental and thermal stabilities remains challenging. Herein, metal-containing silicon carbonitride (SiCN/M) nanocomposite ceramics with multiphase heterointerfaces were in situ synthesized via coordination crosslinking, catalytic graphitization, and phase separation processes using trace amounts of metal-organic frameworks (MOFs). The results reveal that the regulation of dielectric genes by MOFs can yield considerable lattice strain and abundant lattice defects, contributing to strong interfacial and dipole polarizations. The as-prepared SiCN/M ceramics demonstrate excellent microwave absorption performance: the minimum reflection loss (RLmin ) is -72.6 dB at a thickness of only 1.5 mm and -54.1 dB at an ultralow frequency of 3.56 GHz for the SiCN/Fe ceramics and the RLmin is -55.1 dB with a broad bandwidth of 3.4 GHz at an ultralow thickness of 1.2 mm for the SiCN/CoFe ceramic. The results are expected to provide guidance for the design of future dielectric microwave absorption materials based on heterointerface engineering while offering a paradigm for developing MOF-modified SiCN nanocomposite ceramics with desirable properties.

Thermally Derived Hierarchical Nanoplates for Electromagnetic Protection and Waste Energy Recovery Device

With the advent of intelligent society and the popularity of electronic equipment, the protection and treatment of electromagnetic (EM) radiation have become hot research topics all over the world. Herein, novel 2D carbon-based nanoplates with uniformly embedded Co nanoparticles are prepared, with unique hierarchical structure and integrated magnetic-dielectric components. The obtained hierarchical nanoplates exhibit a wide range of tunable EM properties (ε' for 3.38 to 34.67 and ε″ for 0.13 to 31.45) by manipulating the dispersed states inside wax system, which can achieve an effective switch from microwave absorption to EM interference shielding performance. The optimal reflection loss reaches -55.6 dB, and the shielding efficiency is 93.5%. Meanwhile, the hierarchical nanoplates also exhibit impressive capacitive performance, with a specific capacitance of 1654 F g-1 at 1 A g-1 . Based on this, a creative device is constructed with the nanoplates, which can convert harmful EM radiation to useful electric energy for recycling. This work offers a new idea for the development of EM materials and functional devices, powerfully promoting the advance of energy and environmental fields.

Recent Advances in Multifunctional Reticular Framework Nanoparticles: A Paradigm Shift in Materials Science Road to a Structured Future

Porous organic frameworks (POFs) have become a highly sought-after research domain that offers a promising avenue for developing cutting-edge nanostructured materials, both in their pristine state and when subjected to various chemical and structural modifications. Metal-organic frameworks, covalent organic frameworks, and hydrogen-bonded organic frameworks are examples of these emerging materials that have gained significant attention due to their unique properties, such as high crystallinity, intrinsic porosity, unique structural regularity, diverse functionality, design flexibility, and outstanding stability. This review provides an overview of the state-of-the-art research on base-stable POFs, emphasizing the distinct pros and cons of reticular framework nanoparticles compared to other types of nanocluster materials. Thereafter, the review highlights the unique opportunity to produce multifunctional tailoring nanoparticles to meet specific application requirements. It is recommended that this potential for creating customized nanoparticles should be the driving force behind future synthesis efforts to tap the full potential of this multifaceted material category.

Co/CeO2/C composites derived from bimetallic metal-organic frameworks for efficient microwave absorption

CeO2, an n-type semiconductor material, has been widely used in microwave absorption (MA) due to its unique structural features such as oxygen vacancies and interstitial atoms. In this paper, Co/CeO2/C composites were prepared by a hydrothermal method followed by a pyrolysis process. The effect of different pyrolysis temperatures (650-950 °C) on the MA property of the composites was investigated. When the pyrolysis temperature was 850 °C, the Co/CeO2/C-850 composite exhibited outstanding MA behavior in the frequency range of 2-18 GHz, displaying a minimum reflection loss (RLmin) of -45.22 dB and an effective absorption bandwidth (EAB) of 4.61 GHz at a thin thickness of 1.75 mm. The MA performance of the Co/CeO2/C composites is mainly attributed to the dielectric loss due to interfacial polarization originating from different interfaces and dipole polarization caused by the oxygen vacancies in CeO2. In addition, the introduction of Co nanoparticles not only provides the magnetic loss but also modulates impendence matching for the current magnetoelectric coupling system.

Flash-Induced High-Throughput Porous Graphene via Synergistic Photo-Effects for Electromagnetic Interference Shielding

Porous 2D materials with high conductivity and large surface area have been proposed for potential electromagnetic interference (EMI) shielding materials in future mobility and wearable applications to prevent signal noise, transmission inaccuracy, system malfunction, and health hazards. Here, we report on the synthesis of lightweight and flexible flash-induced porous graphene (FPG) with excellent EMI shielding performance. The broad spectrum of pulsed flashlight induces photo-chemical and photo-thermal reactions in polyimide films, forming 5 × 10 cm2-size porous graphene with a hollow pillar structure in a few milliseconds. The resulting material demonstrated low density (0.0354 g cm-3) and outstanding absolute EMI shielding effectiveness of 1.12 × 105 dB cm2 g-1. The FPG was characterized via thorough material analyses, and its mechanical durability and flexibility were confirmed by a bending cycle test. Finally, the FPG was utilized in drone and wearable applications, showing effective EMI shielding performance for internal/external EMI in a drone radar system and reducing the specific absorption rate in the human body.

Wheat-like Ni-coated core-shell silver nanowires for effective electromagnetic wave absorption

Nowadays, developing high-performance electromagnetic functional materials to eliminate the ever-increasing electromagnetic pollution problem is necessary for the complex electromagnetic environment. However, the materials with high electrical conductivity are prone to secondary electromagnetic pollution due to interface impedance mismatching. Herein, the wheat-like electrically conductive and magnetic silver nanowire@nickle (AgNW@Ni) composites were fabricated via a one-pot in-situ growth method. The electromagnetic properties of the composites could be regulated by adjusting different ratios of precursors, resulting in various morphological features of the nanowire as the core with different Ni shell thicknesses. When the Ag and Ni molar ratio was 1:1.1, the AgNW@Ni composite exhibited the optimal minimum reflection loss (RL_min) of -61.1 dB with an adequate effective absorption bandwidth (EAB) of 4.06 GHz owing to good impedance matching, abundant heterostructures, and synergistic electrical and magnetic losses. Even after three months, it still maintained an acceptable RL_min value of -39.7 dB and similar EAB, demonstrating its long-term operational stability. This unique composite is expected to be applied in more actual electromagnetic protection occasions.

Preparation of MoFs-Derived Cobalt Oxide/Carbon Nanotubes Composites for High-Performance Asymmetric Supercapacitor

Metal–organic frameworks (MOFs)-derived metallic oxide compounds exhibit a tunable structure and intriguing activity and have received intensive investigation in recent years. Herein, this work reports metal–organic frameworks (MOFs)-derived cobalt oxide/carbon nanotubes (MWCNTx@Co3O4) composites by calcining the MWCNTx@ZIF-67 precursor in one step. The morphology and structure of the composite were investigated by scanning electron microscope (SEM) and transmission electron microscope (TEM) characterization. The compositions and valence states of the compounds were characterized by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Benefiting from the structurally stable MOFs-derived porous cobalt oxide frameworks and the homogeneous conductive carbon nanotubes, the synthesized MWCNTx@Co3O4 composites display a maximum specific capacitance of 206.89 F·g−1 at 1.0 A·g−1. In addition, the specific capacitance of the MWCNT3@Co3O4//activated carbon (AC) asymmetric capacitor reaches 50 F·g−1, and has an excellent electrochemical performance. These results suggest that the MWCNTx@Co3O4 composites can be a potential candidate for electrochemical energy storage devices.

Progress of high performance Ti3C2Tx MXene nanocomposite films for electromagnetic interference shielding

With the rapid growth of 5G communication technology, it is imperative to produce electromagnetic interference (EMI) shielding materials to combat the growing electromagnetic radiation pollution. For new shielding applications, EMI shielding materials with high flexibility, light weight and good mechanical strength are in high demand. Due to their light weight, high flexibility, excellent EMI shielding performance, high mechanical properties, and multifunctionality, Ti₃C₂T_x MXene nanocomposite films have shown absolute benefits in EMI shielding in recent years. Consequently, numerous lightweight and flexible high-performance Ti₃C₂T_x MXene nanocomposite films have been generated quickly. In this article, we discuss not only the present state of EMI shielding material research, but also the synthesis and electromagnetic properties of Ti₃C₂T_x MXene. In addition, the loss mechanism of EMI shielding is described, with an emphasis on the analysis and summary of the research progress of diverse layer structured Ti₃C₂T_x MXene nanocomposite films for EMI shielding. Finally, the current issues of design and fabrication for Ti₃C₂T_x MXene nanocomposite films that need to be addressed are proposed, as well as the future research direction for Ti₃C₂T_x MXene nanocomposite films.

Microwave absorption property of GO-Fe/FeO-NiO HNFs: GO decorated Fe/FeO-NiO hexagonal flakes with a 2D/0D/2D structure

In this study, Fe/FeO-NiO HNFs in which 2D NiO hexagonal nanoflakes (NiO HNFs) were decorated by 0D Fe/FeO NPs were prepared by a facile hydrothermal method. Then, 0D/2D Fe/FeO-NiO HNFs were loaded on 2D GO sheets in three different weight ratios of GO (1 : 3), (1 : 4), and (1 : 5) to Fe/FeO-NiO HNFs and a novel GO-Fe/FeO-NiO HNF composite with a 2D/0D/2D structure was successfully produced. TEM images revealed the interesting morphology of the GO-Fe/FeO-NiO HNF composite in which individual FeO NPs with a narrow size distribution (∼15 nm) were arranged in hexagonal NiO nanoflakes, decorated on the GO substrate. Since the morphology of nanomaterials has an important effect on their microwave absorption properties, designing a composite with an asymmetric morphology, which is the combination of zero, one, and two-dimensional nanostructures can be very efficient for adjusting the microwave absorption property. The microwave absorption ability of GO-Fe/FeO-NiO HNF composites was surveyed. All samples of Fe/FeO-NiO HNF composites exhibited superior microwave attenuation performance in terms of reflection loss with a suitable bandwidth. The minimum reflection losses for GO-Fe/FeO-NiO HNFs (1 : 3), (1 : 4), and (1 : 5) reached -75.22, -53, and -18 dB, respectively, and the effective absorption bandwidths (RL ≤ -10 dB) for GO-Fe/FeO-NiO HNFs (1 : 3), (1 : 4), and (1 : 5) were 2, 3 and 3.2 GHz, respectively.

Organic Supercapacitors as the Next Generation Energy Storage Device: Emergence, Opportunity, and Challenges

Harnessing new materials for developing high-energy storage devices set off research in the field of organic supercapacitors. Various attractive properties like high energy density, lower device weight, excellent cycling stability, and impressive pseudocapacitive nature make organic supercapacitors suitable candidates for high-end storage device applications. This review highlights the overall progress and future of organic supercapacitors. Sustainable energy production and storage depend on low cost, large supercapacitor packs with high energy density. Organic supercapacitors with high pseudocapacitance, lightweight form factor, and higher device potential are alternatives to other energy storage devices. There are many recent ongoing research works that focus on organic electrolytes along with the material aspect of organic supercapacitors. This review summarizes the current research status and the chemistry behind the storage mechanism in organic supercapacitors to overcome the challenges and achieve superior performance for future opportunities.

A hierarchical integrated 3D carbon electrode derived from gingko leaves via hydrothermal carbonization of H3PO4 for high-performance supercapacitors

Electrochemical ultracapacitors derived from green and sustainable materials could demonstrate superior energy output and an ultra-long cycle life owing to large accessible surface area and obviously shortened ion diffusion pathways. Herein, we have established an efficient strategy to fabricate porous carbon (GLAC) from sustainable gingko leaf precursors by a facile hydrothermal activation of H3PO4 and low-cost pyrolysis. In this way, GLAC with a hierarchically porous structure exhibits extraordinary adaptability toward a high energy/power supercapacitor (∼709 F g-1 at 1 A g-1) in an aqueous electrolyte (1 M KOH). Notably, the GLAC-2-based supercapacitor displays an ultra-high stability of ∼98.24% even after 10 000 cycles (10 A g-1) and an impressive energy density as large as ∼71 W h kg-1 at a power density of 1.2 kW kg-1. The results provide new insights that the facile synthetic procedure coupled with the excellent performance contributes to great potential for future application in the electrochemical energy storage field.

Autogenous and Tunable CNTs for Enhanced Polarization and Conduction Loss Enabling Sea Urchin-Like Co3ZnC/Co/C Composites with Excellent Microwave Absorption Performance

ZIF-67-derived magnetic metal/carbon composites are considered prospective candidates for use as microwave absorption (MA) materials owing to their magnetoelectric synergy. However, the structure of ZIF-67-derived MA materials mainly depends on the morphology and composition of pristine metal-organic frameworks (MOFs), and their microstructures lack a rational design. Herein, a multidimensional sea urchin-like carbon nanotubes (CNTs)-grafted carbon polyhedra-encapsulated Co₃ZnC/Co nanoparticle composite was prepared by one-step catalytic pyrolysis of ZIF-67/ZnO using a rational structural design. The autogenous and tunable CNTs obtained with the assistance of zinc evaporation not only overcome the limitation of homogeneous dispersion but also endow the Co₃ZnC/Co/C composite with outstanding MA properties owing to the conduction loss provided by CNTs, polarization loss caused by multiple components, and electromagnetic wave trap composed of a special sea urchin-like structure. Consequently, the minimum reflection loss of ZZ_0.1-600 reaches -60.3 dB at 1.6 mm, the maximum absorption bandwidth of ZZ_0.05-600 is 6.24 GHz (covering nearly the entire Ku band) at 1.9 mm, and the structure has a low weight ratio (30 wt %). Compared with Z-600 and pure ZnO, the MA performance of the sea urchin-like Co₃ZnC/Co/C composite obtained by rational structural design has been greatly improved; this strategy offers a new approach for optimizing the MA performance of materials according to their structural design.

Bimetallic ZIF-derived conductive network of Co–Zn@NPC@MWCNT nanocomposites for efficient electromagnetic wave absorption in the whole X-band

Bimetallic ZIFs-derived Co-Zn@NPC@MWCNTs nanocomposites are successfully fabricated, which possess double absorption peaks of −76.18 dB and −33.09 dB with a thickness of 3.187 mm. The composites exhibit a bandwidth of 6.56 GHz with 3.0 mm thickness.

One-Pot Synthesis of Porous Crystal Structured Nanosponge-Like Pristine Copper Metal-Organic Framework for Hybrid Supercapacitor Application

Hybrid supercapacitors are promising energy storage devices where high-power delivery is needed in continuous supply (like e-vehicles, cranes, industrialized machines, etc.). Metal-Organic Frameworks (MOFs) are the leading porous materials, and...