Self-trapped excitons in soft semiconductors

Novel rare-earth doped Cs2NaGdCl6:Sb3+ double perovskite nanocrystals toward good ability of color tuning with high quantum efficiency

All-inorganic halide double perovskites have attracted extensive attention as new luminescent materials owing to their high luminous efficiency and wide emission spectrum. In this work, blue-red bicolor Cs2NaGdCl6 (CNGC) double perovskite nanocrystals doped with Sb3+/Ho3+ were prepared using a hydrothermal method. The incorporation of Sb3+ significantly enhanced the intrinsic "self-trapped excitons (STEs)" with a wide-band bright blue emission centered at 470 nm. On this basis, different concentrations of Ho3+ were introduced to achieve color tunable emission from blue to red region, with extremely high quantum efficiencies of 96.53% and 92.17%, respectively. By the use of diverse methods, including spectroscopic analysis and fluorescence lifetime, the mechanism of efficient luminescence related to the different dopant concentrations was comprehensively explored. Results show that Sb3+ not only can enhance the intrinsic STEs luminescence of the CNGC but also has an efficient activation effect on the rare earth ion Ho3+, because it plays the role as a bridge for the two energy transfer channels between the luminescence centers, and the details of the mechanism and energy transfer efficiency were investigated. Thermal stabilities of the double perovskites were studied over the temperature range of 303-473 K and good performances were demonstrated from the fact that the PL intensities of CNGC:1%Sb3+ and CNGC:1%Sb3+/10%Ho3+ at 423 K were 75.1% and 70.1% compared to those at 303 K, respectively. With the CNGC:1%Sb3+ and CNGC:1%Sb3+/10Ho3+ used, the UV light-emitting diode activated devices were fabricated and characterized. The bright blue and red emissions suggest the materials' prominent potential in the application of plant lighting. Finally, to achieve white-light emission in the sole CNGC matrix, a strategy of tri-doping Tb3+ was proposed based on the principle of the three primary colors. The device fabrication with CNGC:1%Sb3+/10%Ho3+/2.5%Tb3+ sample and the characterization processes prove its high feasibility and then provide valuable insights in the design of Sb ion-doped lead-free double perovskites toward easily tunable color in a wide range which can be applied in various fields.

Cr3+/Yb3+ Codoped Cs2NaInCl6 Double Perovskites for Near-Infrared Light-Emitting Diodes

Near-infrared (NIR) light-emitting diodes (LEDs) are potential devices that could become the core components in biological imaging, security monitoring, etc., which are currently constrained by suboptimal luminous efficiency due to the absence of excellent luminescent materials. Here, we report a double perovskite Cs2NaInCl6 that is suitable for Cr3+ doping and exhibits broad NIR emission. Through direct absorption and energy transfer (ET) from the self-trapped excitons (STEs) induced in the Cs2NaInCl6 matrix, Cr3+ can be excited to 4T1(P), 4T1(F), and 4T2(F) levels. Then, the broad emission with a full width at half-maximum (FWHM) of ∼150 nm, spanning 800 to 1300 nm, and a high photoluminescence quantum yield (PLQY) of up to 70% can be realized, resulting from the 4T2→4A2 transition of Cr3+. Subsequently, the introduction of Yb3+ endows Cs2NaInCl6:Cr3+,Yb3+ with a higher PLQY of 76% at the optimal doping ratio than Cs2NaInCl6:Cr3+. Ultimately, a miniaturized NIR LED device packaged based on Cs2NaInCl6:15%Cr3+,15%Yb3+ has been fabricated, which demonstrates superior performance for night vision, traceless perspective detection, and biological imaging. This work not only screens out a suitable Cs2NaInCl6 matrix for Cr3+ doping with high PLQY but also promotes its luminescence performance through Yb3+ doping for NIR LED applications.

Layered Metal-Organic Chalcogenides: 2D Optoelectronics in 3D Self-Assembled Semiconductors

Molecular self-assembly offers an effective and scalable way to design nanostructured materials with tunable optoelectronic properties. In the past 30 years, organic chemistry has delivered a plethora of metal-organic structures based on the combination of organic groups, chalcogens, and a broad range of metals. Among these, several layered metal-organic chalcogenides (MOCs)─including "mithrene" (AgSePh)─recently emerged as interesting platforms to host 2D physics embedded in 3D crystals. Their combination of broad tunability, easy processability, and promising optoelectronic performance is driving a renewed interest in the more general material group of "low-dimensional" hybrids. In addition, the covalent MOC lattice provides higher stability compared with polar materials in operating devices. Here, we provide a perspective on the rise of 2D MOCs in terms of their synthesis approaches, 2D quantum confined exciton physics, and potential future applications in UV and X-ray photodetection, chemical sensors, and electrocatalysis.

Self-Trapped Excitons in 3R ZnIn2S4 with Broken Inversion Symmetry for High-Performance Photodetection

Exploring novel materials with intrinsic self-trapped excitons (STEs) is crucial for advancing optoelectronic technologies. In this study, 2D 3R-phase ZnIn2S4, featuring broken inversion symmetry, is introduced to investigate intrinsic STEs. This material exhibits a broadband photoluminescence (PL) emission with a full width at half maximum of 164 nm and a large Stokes shift of ≈0.6 eV, which arises from the distortion of [ZnS4]6- tetrahedral unit induced by the symmetry breaking and strong electron-phonon coupling. The photophysical properties of the STEs exhibit a high Huang-Rhys factor (15.0), rapid STEs formation time (166 fs), and extended STEs lifetime (1039 ps), as demonstrated by experimental evidence from temperature-dependent PL, Raman spectroscopy, and ultrafast absorption spectroscopy. Additionally, STE-induced photoconductive effect is elucidated, indicating that intrinsic STEs in 3R-ZnIn2S4 can provide a synergistic effect that enhances absorption capacity, localization, and lifetime by capturing the self-trapped hole state. Consequently, the 2D 3R-ZnIn2S4 photodetector exhibits remarkable broad-spectrum photosensitivity, including a photo-switching ratio of 11286, response times of less than 0.6 ms, responsivity of 15.2 A W-1, detectivity of 1.02 × 10¹¹ Jones, and external quantum efficiency of 5032% under 375 nm light. These findings provide new ideas for exploring materials with intrinsic STEs to achieve novel high-performance photodetector applications.

Tuning the Optical Absorption Edge of Vacancy-Ordered Double Perovskites through Metal Precursor and Solvent Selection

Vacancy-ordered double perovskites with the formula A 2 MX 6 (where A is a +1 cation, M is a +4 metal, and X is a halide ion) offer improved ambient stability over other main-group halide AMX 3 perovskites and potentially reduced toxicity compared to those containing lead. These compounds are readily formed through a number of synthetic routes; however, the manner in which the synthetic route affects the resulting structure or optoelectronic properties has not been examined. Here, we investigate the role of distinct precursors and solvents in the formation of the indirect band gap vacancy-ordered double perovskite Cs2TeBr6. While Cs2TeBr6 can be synthesized from TeBr4 or TeO2, we find that synthesis from TeBr4 is more sensitive to solvent selection, requiring a polar solvent to enable the conversion of TeBr4. Synthesis from TeO2 proceeds in all of the organic solvents tested, provided that HBr is added to solubilize TeO2 and enable the formation of [TeBr6]2-. Furthermore, the choice of metal precursor and solvent impacts the product color and optical absorption edge, which we find arises from particle size effects. The emission energy remains unaffected, consistent with the idea that emission in these zero-dimensional structures arises from the isolated [TeBr6]2- octahedra, which undergo dynamic Jahn-Teller distortion rather than band-edge recombination. Our work highlights how even minor changes in synthetic procedures can lead to variability in metrics such as the absorption edge and emission lifetime and sheds light on how the optical properties of these semiconductors can be controlled for light-emitting applications.

Sb3+ dopant triggered highly efficient emission in zero-dimensional organic-inorganic hybrid metal halides

Hybrid luminescent metal halides have attracted considerable attention for their structural diversity and versatility in photonic applications. Herein, we fabricate Sb3+ doped organic-inorganic hybrid metal halides (DMA)2CsInCl6 (DMA = [CH3NH2CH3]+) single crystal. Under ultraviolet light excitation, the crystals yield bright green emission at 550 nm with near-unity photoluminescence quantum efficiency (PLQY), which is attributed to the strong electronegativity and ns2 lone pairs of Sb3+ dopants. Given the slender rod-shaped semblance, bright green emission, near-unity PLQY, and large Stokes shift, Sb3+-doped (DMA)2CsInCl6 allows the potential optical waveguide applications.

Fate of Optical Excitons in FAPbI3 Nanocube Superlattices

Understanding the nature of the photoexcitation and ultrafast charge dynamics pathways in organic halide perovskite nanocubes and their aggregation into superlattices is key for potential applications as tunable light emitters, photon-harvesting materials, and light-amplification systems. In this work, we apply two-dimensional coherent electronic spectroscopy (2DES) to track in real time the formation of near-infrared optical excitons and their ultrafast relaxation in CH(NH2)2PbI3 nanocube superlattices. Our results unveil that the coherent ultrafast dynamics is limited by the combination of the inherent short exciton decay time (≃40 fs) and the dephasing due to the coupling with selective optical phonon modes at higher temperatures. On the picosecond time scale, we observe the progressive formation of long-lived localized trap states. The analysis of the temperature dependence of the excitonic intrinsic line width, as extracted by the antidiagonal components of the 2D spectra, unveils a dramatic change of the excitonic coherence time across the cubic to tetragonal structural transition. Our results offer a new way to control and enhance the ultrafast coherent dynamics of photocarrier generation in hybrid halide perovskite synthetic solids.

Self-trapped emissions in 2D lead-free halide perovskites driven by divalent spacer cations

The mono- and divalent spacer cation investigation in sodium/indium-based 2D double perovskites revealed significant impacts on optoelectronic properties due to distortions in the inorganic layers. The strong electron-phonon coupling in a novel lead-free Dion-Jacobson phase highlights a promising class for broad-emission devices based on self-trapped excitons (STE), offering enhanced structural stability.

Ab Initio Self-Trapped Excitons

We propose a new formalism and an effective computational framework to study self-trapped excitons (STEs) in insulators and semiconductors from first principles. Using the many-body Bethe-Salpeter equation in combination with perturbation theory, we are able to obtain the mode- and momentum-resolved exciton-phonon coupling matrix element in a perturbative scheme and explicitly solve the real space localization of the electron (hole), as well as the lattice distortion. Further, this method allows us to compute the STE potential energy surface and evaluate the STE formation energy and Stokes shift. We demonstrate our approach using two-dimensional magnetic semiconductor chromium trihalides and a wide-gap insulator BeO, the latter of which features dark excitons, and make predictions of their Stokes shift and coherent phonon generation which we hope will spark future experiments such as photoluminescence and transient absorption studies.

Direct Evidence of the Effect of Water Molecules Position in the Spectroscopy, Dynamics, and Lighting Performance of an Eco-Friendly Mn-Based Organic-Inorganic Metal Halide Material for High-Performance LEDs and Solvent Vapor Sensing

Luminescent Mn(II)-based organic-inorganic hybrid halides have drawn attention as potential materials for sensing and photonics applications. Here, the synthesis and characterization of methylammonium (MA) manganese bromide ((MA)nBrxMn(H2O)2, (n = 1, 4 and x = 3, 6)) with different stoichiometries of the organic cation and inorganic counterpart, are reported. While the Mn2+ centers have an octahedral conformation, the two coordinating water molecules are found either in cis (1) or in trans (2) positions. The photophysical behavior of 1 reflects the luminescence of Mn2+ in an octahedral environment. Although Mn2+ in 2 also has octahedral coordination, at room temperature dual emission bands at ≈530 and ≈660 nm are observed, explained in terms of emission from Mn2+ in tetragonally compressed octahedra and self-trapped excitons (STEs), respectively. Above the room temperature, 2 shows quasi-tetrahedral behavior with intense green emission, while at temperatures below 140 K, another STE band emerges at 570 nm. Time-resolved experiments (77-360 K) provide a clear picture of the excited dynamics. 2 shows rising components due to STEs formation equilibrated at room temperature with their precursors. Finally, the potential of these materials for the fabrication of color-tunable down-converted light-emitting diode (LED) and for detecting polar solvent vapors is shown.

Self-Trapped Exciton Emission in Highly Polar 0D Hybrid Ammonium/Hydronium-Based Perovskites Triggered by Antimony Doping

Various monovalent cations are employed to construct metal halide perovskites with various structures and functionalities. However, perovskites based on highly polar A-site cations have seldom been reported. Here, a novel hybrid 0D (NH4)x(OH3)3-xInCl6 perovskite with highly polar hydronium OH3+ cations is introduced in this study. Upon doping with Sb3+, hybrid 0D (NH4)x(OH3)3-xInCl6 single crystals exhibited highly efficient broadband yellowish-green (550 nm) and red (630 nm) dual emissions with a PLQY of 86%. The dual emission arises due to Sb3+ occupying two sites within the crystal lattice that possess different polarization environments, leading to distinct Stokes shift energies. The study revealed that lattice polarity plays a significant role in the self-trapped exciton emission of Sb3+-doped perovskites, contributing up to 25% of the Stokes shift energy for hybrid 0D (NH4)x(OH3)3-xInCl6:Sb3+ as a secondary source, in addition to the Jahn-Teller deformation. These findings highlight the potential of Sb3+-doped perovskites for achieving tunable broadband emission and underscore the importance of lattice polarity in determining the emission properties of perovskite materials.

Lead-free Perovskite with Distorted [InX6]3- Octahedron Induced by Organic Cation and Enhanced PLQY by Sb Doping

In-based halide perovskites have attracted a lot of attention because of their unique broadband emission properties. Herein, a series of In-based hybrid perovskites of (H2MP)2InCl7·H2O (1), (H2EP)2InCl7·H2O (2), (H2MP)2InBr7·H2O (3), and (H2EP)2InBr7·H2O (4) were synthesized under the control of halogen ions and organic cations. 1, 2, and 4 exhibit obvious photoluminescence properties with peaks at 392, 442, and 652 nm, respectively. The effects of the different components on the crystal structure and photoluminescence properties are discussed by calculating the structural distortion of the [InX6]3- octahedron. The photoluminescence properties of 1 and 4 were significantly improved after Sb3+ doping with PLQY values of 57.12 and 41.53%. Finally, a white LED was successfully fabricated with the two doped compounds coated onto the 365 nm blue LED chip.

Realizing efficient broadband near-infrared emission and multimode photoluminescence switching via coordination structure modulation in Sb3+-doped 0D organic metal chlorides

Recently, organic Sb(III)-based metal halides have achieved significant results in the visible light region due to their efficient emission. However, realizing efficient broadband near-infrared (NIR) emission in such materials is a great challenge. Herein, we developed three different NIR emitters via a coordination structure modulation strategy in Sb3+-doped zero-dimensional organic metal chlorides of (C20H20P)2MnCl4, (C20H20P)2ZnCl4, and (C20H20P)2CdCl4 with tetrahedral structure. More specifically, after the dopant Sb3+ is inserted into the host lattice, the coordination structures of Sb3+ ions can change from [SbCl5]2- square-pyramidal configuration to [SbCl4]- clusters, which will bring a larger lattice distortion degree to the excited state compared to the ground state, resulting in a larger Stokes shift. Thus, efficient NIR emission with near-unity photoluminescence quantum yield (PLQY) can be obtained in Sb3+-doped compounds under 365 nm excitation. Moreover, Sb3+-doped NIR emitters also show remarkable stabilities, which prompts us to fabricate NIR phosphor conversion light-emitting diodes (pc-LEDs) and demonstrate their application in night vision. More interestingly, the Sb3+-doped (C20H20P)2MnCl4 shows tunable emission characteristics, which can be tuned from green to greenish-yellow, orange, red, and NIR emission under different external stimuli, and thus we can demonstrate the applications of this compound in quintuple-mode fluorescence anti-counterfeiting and information encryption.

Evidence of Short-Lived High-Energy Emissive State and Triplet Character of the Self-Trapped Exciton in Cs3Cu2I5 Perovskite

Cs3Cu2I5 perovskite displays a Stokes-shifted photoluminescence (PL) at 445 nm, attributed to the self-trapped excitons (STEs). Unlike that observed in other perovskite materials, the free-exciton emission is not evidenced in this case. Herein, we reveal the existence of a short-lived high-energy emission centered around 375 nm through the reconstruction of time-resolved emission spectra (TRES), which is independent of the shape/size of Cs3Cu2I5 perovskite. This high-energy emission is proposed to originate from the free-exciton-derived distorted S1 state of the 0D Cs3Cu2I5 moiety. Moreover, STE PL (∼445 nm) was found to have phosphorescence characteristics. Theoretical calculation confirms a facile intersystem crossing at the Franck-Condon geometry, indicating the high lifetime of the STE and its triplet nature. The existence of a high-energy emissive state and the phosphorescent nature of the STE PL band provide valuable insights that could advance our understanding of the photophysics in these materials.

Dual-color photoluminescence modulation of zero-dimensional hybrid copper halide microcrystals

Zero-dimensional hybrid copper(I) halides (HCHs) are attractive due to their interesting photoluminescence (PL) properties and the high abundance and low toxicity of copper. In this study, we report green-red dual emission from rhombic 1-butyl-1-methyl piperidinium copper bromide [(Bmpip)2Cu2Br4] microcrystals (MCs) prepared on borosilicate glass. The structure and elemental composition of the MCs are characterized by single crystal X-ray diffraction analysis, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Interestingly, MCs prepared on an ITO-coated glass plate show an intense green emission compared to the dual emission on a bare glass or plastic substrate. Furthermore, the intensity of the green emission from the MC is enormously increased by powdering using a conductive material, suggesting the deactivation of the red-emitting state by a charge transfer interaction with the conductor. These findings open a new strategy to suppress the self-trapping of excitons by longitudinal optical phonons and control the dual emitting states in HCHs.

Distinct Excitonic Emissions in 2D (C7 H7 N2 )2 PbX4 (X = Cl, Br) under Compression

Two dimensional (2D) hybrid metal halides (HMHs) usually exhibit free excitonic (FE) emission, and self-trapped excitonic (STE) emission can also be achieved by adopting appropriate halogens and organic cations. Recently, significant efforts have been made to modulate and then clarify the transformation and connection between these two types of excitonic emissions in 2D HMHs. In this study, intriguing pressure-tuned transitions between FE emission and STE emission are observed in 2D (C7 H7 N2 )2 PbCl4 . In contrast, only FE emissions with tunable emission energies are observed in 2D (C7 H7 N2 )2 PbBr4 which possesses a similar structure with (C7 H7 N2 )2 PbCl4 under compression. Such distinct halide-dependent optical responses under pressure are experimentally revealed to arise from the intricate interplay among several factors in these HMHs, including the stiffness of the structure, the Coulomb force between the organic cations and the inorganic octahedra, and the magnitude of inorganic octahedral distortion. These high-pressure optical explorations can unravel the underlying interrelationship between the crystal structure and excitonic emission in 2D HMHs.

Tunable dual-emission of Sb3+, Ho3+Co-doped Cs2NaScCl6single crystals for light-emitting diodes

Lead-free halide double perovskites are considered as one of the most promising materials in optoelectronic devices, such as solar cells, photodetectors, and light-emitting diodes (LEDs), due to their environmental friendliness and chemical stability. However, the extremely low photoluminescence quantum yield (PLQY) of self-trapped excitons (STEs) emission from lead-free halide double perovskites impedes their applications. Herein, Sb3+ions were doped into rare-earth-based double perovskite Cs2NaScCl6single crystals (SCs), resulting in a large enhancement of PLQY from 12.57% to 87.37%. Moreover, by co-doping Sb3+and Ho3+into Cs2NaScCl6SCs, the emission color can be tuned from blue to red, due to an efficient energy transfer from STEs to Ho3+ions. Finally, the synthesized sample was used in multicolor LED, which exhibited excellent stability and optical properties. This work not only provides a new strategy for improving the optical properties of Cs2NaScCl6SCs, but also suggests its potential application in multicolor LEDs.

Unraveling the Origin of Long-Lifetime Emission in Low-Dimensional Copper Halides via a Magneto-optical Study

The origin of the long lifetime of self-trapped exciton emission in low-dimensional copper halides is currently the subject of extensive debate. In this study, we address this issue in a prototypical zero-dimensional copper halide, Cs2(C18)2Cu2I4-DMSO, through magneto-optical studies at low temperatures down to 0.2 K. Our results exclude spin-forbidden dark states and indirect phonon-assisted recombination as the origin of the long photoluminescence lifetime. Instead, we propose that the minimal Franck-Condon factor of the radiative transition from excited states to the ground state is the decisive factor, based on the transition probability analysis. Our findings offer insights into the electronic processes in low-dimensional copper halides and have the potential to advance the application of these distinctive materials in optoelectronics.

Investigation on broadband emission of two-dimensional melamine lead iodide perovskite (2D-C3H8N6PbI4): An experimental and theoretical approach

Novel two-dimensional melamine lead iodide perovskite (2D-C3H8N6PbI4) is synthesized to investigate its crystallinity, optical band gap and broadband emission properties and to make comparisons with 2D-C3H8N6PbCl4/2D-C3H8N6PbBr4 perovskites. Both experimental and density functional theory (DFT) interrogations on 2D-C3H8N6PbX4 (X = Cl, Br and I) are conducted. The crystal structure, morphology and percentile of Pb and halide elements are confirmed using scanning electron microscope (SEM), and energy dispersive spectrum (EDS), powder/single crystal X-ray diffraction (PXRD/SXRD), DFT and X-ray crystallography simulations. The optical band gaps of 2D-C3H8N6PbX4 perovskites are determined from the Tauc plot fitting of absorbance and DFT studies. Distinct broadband emission of 2D-C3H8N6PbX4 perovskites between 300 and 800 nm is observed, which can be fitted with multiple Gaussian distributions. The fittings of broad PL spectra from 2D-C3H8N6PbCl4/2D-C3H8N6PbBr4 perovskites confirm the involvement of both Dexter energy transfer from melamine cation and self-trapped excitons (STEs). However, the broadband emission of 2D-C3H8N6PbI4 is attributed only to the Dexter energy transfer from melamine cation and the absence of STEs is attributed to the larger lattice deformation of 2D-C3H8N6PbI4. Moreover, the involvement of spin-orbit coupling (SOC) in the energy transfer is clarified to attest that the broadband emission of 2D-C3H8N6PbI4 is distinct among its halide family.

Nature of Self-Trapped Exciton Emission in Zero-Dimensional Cs2ZrCl6 Perovskite Nanocrystals

Low dimensional perovskite-inspired materials with self-tapped exciton (STE) emission have stimulated a surge of cutting-edge research in optoelectronics. Despite numerous efforts on developing versatile low-dimensional perovskite-inspired materials with efficient STE emissions, there is little emphasis on the intrinsic dynamics of STE-based broad emission in these materials. Here, we investigated the excited state dynamics in zero-dimensional (0D) Cs2ZrCl6 nanocrystals (NCs) with efficient blue STE emission. By using femtosecond transient absorption (fs-TA) spectroscopy, the ultrafast STE formation process within 400 fs is directly observed. Then, the formed STEs relax to an intermediate STE state with a lifetime of ∼180 ps before reaching the emissive STE state with a lifetime of ∼15 μs. Our work offers a comprehensive and precise dynamic picture of STE emission in low-dimensional metal halides and sheds light on extending their potential applications.

Interlayer Exciton-Phonon Bound State in Bi2Se3/Monolayer WS2 van der Waals Heterostructures

The ability to assemble layers of two-dimensional (2D) materials to form permutations of van der Waals heterostructures provides significant opportunities in materials design and synthesis. Interlayer interactions can enable desired properties and functionality, and understanding such interactions is essential to that end. Here we report formation of interlayer exciton-phonon bound states in Bi₂Se₃/WS₂ heterostructures, where the Bi₂Se₃ A₁⁽³⁾ surface phonon, a mode particularly susceptible to electron-phonon coupling, is imprinted onto the excitonic emission of the WS₂. The exciton-phonon bound state (or exciton-phonon quasiparticle) presents itself as evenly separated peaks superposed on the WS₂ excitonic photoluminescence spectrum, whose periodic spacing corresponds to the A₁⁽³⁾ surface phonon energy. Low-temperature polarized Raman spectroscopy of Bi₂Se₃ reveals intense surface phonons and local symmetry breaking that allows the A₁⁽³⁾ surface phonon to manifest in otherwise forbidden scattering geometries. Our work advances knowledge of the complex interlayer van der Waals interactions and facilitates technologies that combine the distinctive transport and optical properties from separate materials into one device for possible spintronics, valleytronics, and quantum computing applications.