Chalcogen (S, Se, and Te) decorated few-layered Ti3C2Tx MXene hybrids: modulation of properties through covalent bonding

Fabrication of a wearable and foldable photodetector based on a WSe2-MXene 2D-2D heterostructure using a scalable handprint technique

Several studies on semiconductor material-based single-band, high-performance photosensitive, and chemically stable photodetectors are available; however, the lack of broad spectral response, device flexibility, and biodegradability prevents them from being used in wearable and flexible electronics. Apart from that, the selection of the device fabrication technique is a very crucial factor nowadays in terms of equipment utilization and environmental friendliness. This report presents a study demonstrating a straightforward solvent- and equipment-free handprint technique for the fabrication of WSe2-Ti3C2TX flexible, biodegradable, robust, and broadband (Vis-NIR) photodetectors. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), UV-visible spectroscopy, and X-ray photoelectron spectroscopy (XPS) confirm the formation of a WSe2-Ti3C2TX film. The WSe2-Ti3C2TX van der Waals heterostructure plays a key role in enhancing the optoelectrical properties. The as-prepared photodetector exhibits efficient broadband response with a photoresponsivity and a detectivity of 0.3 mA W-1 and 6.8 × 1010 Jones, respectively, under NIR (780 nm) irradiation (1.0 V bias). Under various pressure and temperature conditions, the device's flexibility and durability were tested. The biodegradable photodetector prepared through the solvent- and equipment-free handprint technique has the potential to attract significant interest in wearable and flexible electronics in the future.

Powering the Future: Unleashing the Potential of MXene-Based Dual-Functional Photoactive Cathodes in Photo-Rechargeable Zinc-Ion Capacitor

Dual-functional photo-rechargeable (photo-R) energy storage devices, which acquire stored energy from solar energy harvesting, are being developed to battle the current energy crisis. In this study, these findings on the photo-driven characteristics of MXene-based photocathodes in photo-R zinc-ion capacitors (ZICs) are presented. Along with the pristine Ti3 C2 Tx MXene, tellurium/Ti3 C2 Tx (Te/Ti3 C2 Tx ) hybrid nanostructure is synthesized via facile chemical vapor transport technique to examine them for photocathodes in ZICs. Interestingly, the evaluated self-powered photodetector devices using MXene-based samples revealed a pyro-phototronic behavior introduced into the samples, with higher desirability observed in Te/Ti3 C2 Tx . The photo-R ZICs results exhibited a capacitance enhancement of 50.86% for Te/Ti3 C2 Tx at two scan rates of 5 and 10 mV s-1 under illumination, compared to dark conditions. In contrast, a capacitance enhancement of 30.20% is obtained for the pristine Ti3 C2 Tx at only a 5 mV s-1 scan rate. Furthermore, both samples achieved photo-charging voltage responses of ≈960 mV, and photoconversion efficiencies of 0.01% (for Te/ Ti3 C2 Tx ) and 0.07% (for Ti3 C2 Tx ). These characteristics in MXene-based single photo-R ZICs are significant and considerable with the distinguished integrated photo-R supercapacitors with solar cells, or coupled energy-harvesting and energy-storing devices reported recently in the literature.