Temperature-dependent soft wetting on amorphous, uncrosslinked polymer surfaces

Quantitative rationalization of the unexpectedly moderate water wettability of poly(vinyl alcohol) surfaces: thermodynamic evaluation and prediction of surface hydrogen bonding

In this work, a series of poly(vinyl alcohol) (PVA) films with defined but varied water wettability was prepared by curing as-prepared PVA films at systematically adjusted temperatures. The polar components of surface energy (γs,p) of the resulting PVA films were calculated and correlated with the molecular configurations of their surface OH groups-free OH (OHf), trans-hydrogen bonded OH (OHt), and gauche-hydrogen bonded OH groups (OHg)-with the aid of attenuated total reflectance Fourier transform infrared spectroscopy. By decomposing the γs,p values of the PVA films as a sum of the contributions from OHf, OHt, and OHg groups, the intrinsic γs,p components of and were calculated to be 8.0 mN m-1 and 9.8 mN m-1, respectively, which were substantially smaller than that of . This provided a thermodynamic foundation not only to rationalize the unexpectedly moderated surface hydrophilicity of PVA films but also to quantitatively predict the fHB component of hydrogen-bonded OH groups on their surfaces according to their water wettability.

Phase separation dynamics in wetting ridges of polymer surfaces swollen with oils of different viscosities

When drops are placed on a sufficiently soft surface, the drop surface tension drives an out of plane deformation around the contact line (i.e., a wetting ridge). For soft elastomeric surfaces that are swollen with a liquid, capillarity from a drop can induce a phase separation in the wetting ridge. Using confocal microscopy, we study the dynamics of phase separation at the wetting ridge of glycerol drops on silicone elastomers, which are swollen with silicone oils of varying viscosity (i.e., molecular weight). We show that the viscosity of the swelling oil plays a large role in the oil separation size and separation rate. For networks swollen to near their maximum swelling (i.e., saturated), lower viscosity oil separates more and separates faster at early times compared to larger viscosity oil. During late-stage wetting, the growth rate of the separation is a function of viscosity and swelling ratio, which can be described by a simple diffusive model and a defined wetting ridge geometry. In this late-stage wetting, the higher viscosity oil evidently grows faster, likely because it is further from reaching equilibrium. Interestingly, the separated oil phase region grows with a nearly constant, geometrically similar shape. Understanding how phase separation occurs on swollen substrates should provide information on how to control drop spreading, sliding, adhesion, or friction on such surfaces.

Nanoscale Elasto-Capillarity in the Graphene-Water System under Tension: Revisiting the Assumption of a Constant Wetting Angle

Wetting highly compliant surfaces can cause them to deform. Atomically thin materials, such as graphene, can have exceptionally small bending rigidities, leading to elasto-capillary lengths of a few nanometers. Using large-scale molecular dynamics (MD), we have studied the wetting and deformation of graphene due to nanometer-sized water droplets, focusing on the wetting angle near the vesicle transition. Recent continuum theories for wetting of flexible membranes reproduce our MD results qualitatively well. However, we find that when the curvature is large at the triple-phase contact line, the wetting angle increases with decreasing tension. This is in contrast to existing macroscopic theories but can be amended by allowing for a variable wetting angle.

Controllable Wetting Transitions on Photoswitchable Physical Gels

Softness plays a key role in the deformation of soft elastic substrates at the three-phase contact line, and the acting forces lead to the formation of a wetting ridge due to elastocapillarity. The change in wetting ridge and surface profiles at different softness has a great impact on the droplet behavior in different phenomena. Commonly used materials to study soft wetting are swollen polymeric gels or polymer brushes. These materials offer no possibility to change the softness on demand. Therefore, adjustable surfaces with tunable softness are highly sought-after to achieve on-demand transition between wetting states on soft surfaces. Here, we present a photorheological physical soft gel with adjustable stiffness based on the spiropyran photoswitch that shows the formation of wetting ridges upon droplet deposition. The presented photoswitchable gels allow the creation of reversibly switchable softness patterns with microscale resolution using UV light-switching of the spiropyran molecule. Gels with varying softness are analyzed, showing a decrease in the wetting ridge height at higher gel stiffness. Furthermore, wetting ridges before and after photoswitching are visualized using confocal microscopy, showing the transition in the wetting properties from soft wetting to liquid/liquid wetting.

Phase Separation in Wetting Ridges of Sliding Drops on Soft and Swollen Surfaces

Drops in contact with swollen, elastomeric substrates can induce a capillary mediated phase separation in wetting ridges. Using confocal microscopy, we visualize phase separation of oligomeric silicone oil from a cross-linked silicone network during steady-state sliding of water drops. We find an inverse relationship between the oil tip height and the drop sliding speed, which is rationalized by competing transport timescales of the oil molecules: separation rate versus drop-advection speed. Separation rates in highly swollen networks are as fast as diffusion in pure melts.