Constructing a self-healing injectable SABA/Borax/PDA@AgNPs hydrogel for synergistic low-temperature photothermal antibacterial therapy

Advanced therapeutic strategy: A single-dose injection of a dual-loaded 6-mercaptopurine gelatin-based hydrogel for effective inhibition of tumor growth

The suboptimal aqueous solubility and pronounced systemic toxicity pose significant constraints on the clinical utility of 6-mercaptopurine (6-MP). This study presents an innovative approach using injectable sustained-release hydrogels for localized drug delivery. A gelatin-based anticancer hydrogel (Gel-MP@Gel@6-MP) was developed to deliver 6-MP through both physical encapsulation and chemical coupling via CS bonds, providing a multistage sustained release platform. In vitro experiments demonstrated that physically encapsuled drug achieved rapid release within 4 h, comparable to intravenous administration kinetics. Furthermore, in the presence of glutathione (GSH), nucleophilic attack triggered slow release of S-(6-purinyl) glutathione (PG) and a minor amount of 6-MP, with sustained release observed for up to 96 h. This suggests that, in contrast to conventional delivery methods, the proposed system not only facilitates an initial high-concentration drug release lasting hours, but also enables the sustained release of drug fragments over an extended period of several days, owing to the gradual cleavage of chemical bonds following one single injection. Ultimately, in vivo antitumor studies revealed superior tumor inhibition with Gel-MP@Gel@6-MP compared to free 6-MP. This dual drug loading strategy significantly prolongs drug action duration and obviates the necessity for repeated drug administrations, thereby revealing the diverse modes of drug administration.

A thermosensitive chitin hydrogel with mild photothermal-chemotherapy for facilitating multidrug-resistant bacteria infected wound healing

Bacterial infection of skin wounds leads to serious health problems, including skin defects, inflammatory pain, and even death. To meet the requirements for successful treatment of complicated wounds, a multifunctional dressing is thus highly desirable. In this work, a thermosensitive hydrogel dressing (HBCA) exhibiting injectability, adaptiveness and mild photothermal antibacterial activity was developed for effective infected wound treatment. The HBCA hydrogel was constructed by integrating Ag NPs-incorporated quaternized chitin (DQCA) into the matrix of hydroxybutyl chitin. Laser irradiation could activate the photothermal DQCA to generate heat and rapidly induce the destruction of the bacterial integrity. Meanwhile, the release of DQCA can be accelerated by laser-mediated heating in a controllable manner, quickly reaching the effective concentration and leading to bacterial inactivation in a combined way. The HBCA hydrogel possessed broad-spectrum antibacterial and antibiofilm effect under mild temperature (~48 °C), through combining photothermal therapy (PTT) with chemotherapeutic DQCA. Furthermore, the mouse full-thickness MRSA-infected wound healing test demonstrated that the HBCA hydrogel could accelerate wound regeneration by reducing the inflammatory response, promoting re-epithelialization as well as collagen maturation. This work presents an efficacious and straightforward antibacterial hydrogel dressing that incorporates mild-temperature PTT, particularly in the realm of multidrug-resistant bacterial infection therapies.

A Microenvironment-Responsive Graphdiyne-Iron Nanozyme Hydrogel with Antibacterial and Anti-Inflammatory Effect for Periodontitis Treatment

Periodontitis is a chronic inflammatory disease caused by dental plaque, which leads to tooth loosening and shifting or even tooth loss. Current treatments, including mechanical debridement and antibiotics, often fail to eradicate recalcitrant biofilms and mitigate excessive inflammation. Moreover, these interventions can disrupt the oral microbiome, potentially compromising long-term treatment outcomes. To address these limitations, an injectable nanoenzyme hydrogel composed of a dopamine (DA)-modified hyaluronic acid (HA) scaffold and a graphdiyne-iron (GDY-Fe) complex, named GDY-Fe@HA-DA, exhibits excellent tissue adhesion, self-healing, antibacterial properties, and biocompatibility. Under near-infrared laser irradiation, GDY-Fe@HA-DA effectively eradicates a variety of pathogens, including Escherichia coli, Staphylococcus aureus, and Porphyromonas gingivalis, through a synergistic combination of chemodynamical and photothermal therapies. The hydrogel's efficacy is further validated in both bacterial-infected skin wounds and rat periodontitis models. It effectively alleviates the inflammatory environment and promotes wound healing and periodontal tissue recovery. This findings highlight the potential of GDY-Fe@HA-DA as a promising therapeutic material for periodontitis and other tissue injuries.

Alginate-based hydrogels mediated biomedical applications: A review

With the development in the field of biomaterials, research on alternative biocompatible materials has been initiated, and alginate in polysaccharides has become one of the research hotspots due to its advantages of biocompatibility, biodegradability and low cost. In recent years, with the further understanding of microscopic molecular structure and properties of alginate, various physicochemical methods of cross-linking strategies, as well as organic and inorganic materials, have led to the development of different properties of alginate hydrogels for greatly expanded applications. In view of the potential application prospects of alginate-based hydrogels, this paper reviews the properties and preparation of alginate-based hydrogels and their major achievements in delivery carrier, dressings, tissue engineering and other applications are also summarized. In addition, the combination of alginate-based hydrogel and new technology such as 3D printing are also involved, which will contribute to further research and exploration.

In Situ Photoactivated Antibacterial and Antioxidant Composite Materials to Promote Bone Repair

Trauma and tumor removal usually cause bone defects; in addition, the related postoperative infection also shall be carefully considered clinically. In this study, polylactic acid (PLLA) composite fibers containing Cerium oxide (CeO2) are first prepared by electrospinning technology. Then, the PLLA/CeO2@PDA/Ag composite materials are successfully prepared by reducing silver ion (Ag+) to nano-silver (AgNPs)  coating in situ and binding AgNPs to the materials surface by mussel structure liked polydopamine (PDA). In the materials, Ag+ can be slowly released in simulated body fluids. Based on the photothermal performance of AgNPs, the photothermal conversion efficiency of the materials is 21%, under NIR 808 nm illumination. The effective photothermal conversion can help materials fighting with E. coli and S. aureus in 3 h, with an antibacterial rate of 100%. Additionally, the sustained Ag+ release contributes to the antibacterial in long term. Meanwhile, the materials can mimic the bio-behavior of superoxide dismutase and catalase in decreasing the singlet oxygen level and removing the excess reactive oxygen species. Furthermore, the materials are beneficial for cell proliferation and osteogenic differentiation in vitro. In this study, a promising bone-regenerated material with high photothermal conversion efficiency and antibacterial and anti-oxidation properties, is successfully constructed.

Synergistic Antimicrobial Glycyrrhizic Acid-Based Functional Biosensing Composite for Sensitive Glucose Monitoring and Collaborative Wound Healing

High glucose blood and bacterial infection remain major issues for the slow healing of diabetic wounds, so developing functional biosensing composite with excellent antibacterial and remarkable glucose response sensitivity is necessary and prospective. Herein, by in situ synthesis AgNPs on the surface of self-prepared PTIGA elastomers, PTIGA-AgNPs conductive composites are obtained with efficient synergistic antibacterial effect, excellent mechanical and self-healing properties. The strain of the composites can reach 1800%, and its self-healing efficiency exceeds 90% at 60 °C within 8 h. Both elastomers and composites represent excellent biocompatibility and the antibacterial rate against E. coli and S. aureus exceeded 90%. Moreover, the biosensor assembled from the conductive composites exhibits excellent glucose response sensitivity and stability, with a sensitivity coefficient of 0.518 mA mm-1 in the range of 0.2-3.6 × 10-3 m glucose concentration, as well as a low detection limit of 0.08 × 10-3 m. Furthermore, based on the remarkable antibacterial performance and bioactivity derived from GA, the composites reduce the expression of pro-inflammatory factors and promote the production of anti-inflammatory factors, and effectively promote the regeneration of skin and granulation tissue of wounds in a diabetic full-thickness skin defect model, demonstrating the enormous therapeutic potential in diabetic wound healing.

Nanozymes for the Therapeutic Treatment of Diabetic Foot Ulcers

Diabetic foot ulcers (DFU) are chronic, refractory wounds caused by diabetic neuropathy, vascular disease, and bacterial infection, and have become one of the most serious and persistent complications of diabetes mellitus because of their high incidence and difficulty in healing. Its malignancy results from a complex microenvironment that includes a series of unfriendly physiological states secondary to hyperglycemia, such as recurrent infections, excessive oxidative stress, persistent inflammation, and ischemia and hypoxia. However, current common clinical treatments, such as antibiotic therapy, insulin therapy, surgical debridement, and conventional wound dressings all have drawbacks, and suboptimal outcomes exacerbate the financial and physical burdens of diabetic patients. Therefore, development of new, effective and affordable treatments for DFU represents a top priority to improve the quality of life of diabetic patients. In recent years, nanozymes-based diabetic wound therapy systems have been attracting extensive interest by integrating the unique advantages of nanomaterials and natural enzymes. Compared with natural enzymes, nanozymes possess more stable catalytic activity, lower production cost and greater maneuverability. Remarkably, many nanozymes possess multienzyme activities that can cascade multiple enzyme-catalyzed reactions simultaneously throughout the recovery process of DFU. Additionally, their favorable photothermal-acoustic properties can be exploited for further enhancement of the therapeutic effects. In this review we first describe the characteristic pathological microenvironment of DFU, then discuss the therapeutic mechanisms and applications of nanozymes in DFU healing, and finally, highlight the challenges and perspectives of nanozyme development for DFU treatment.

Chondroitin sulfate/silk fibroin hydrogel incorporating graphene oxide quantum dots with photothermal-effect promotes type H vessel-related wound healing

Chronic wounds with bacterial infection present formidable clinical challenges. In this study, a versatile hydrogel dressing with antibacterial and angiogenic activity composite of silk fibroin (SF), chondroitin sulfate (CS), and graphene oxide quantum dots (GOQDs) is fabricated. GOQDs@SF/CS (GSC) hydrogel is rapidly formed through the enzyme catalytic action of horseradish peroxidase. With the incorporation of GOQDs both gelation speed and mechanical properties have been enhanced, and the photothermal characteristics of GOQDs in GSC hydrogel enabled bacterial killing through photothermal treatment (PTT) at ∼51 °C. In vitro studies show that the GSC hydrogels demonstrate excellent antibacterial performance and induce type H vessel differentiation of endothelial cells via the activated ERK1/2 signaling pathway and upregulated SLIT3 expression. In vivo results show that the hydrogel significantly promotes type H vessels formation, which is related to the collagen deposition, epithelialization and, ultimately, accelerates the regeneration of infected skin defects. Collectively, this multifunctional GSC hydrogel, with dual action of antibacterial efficacy and angiogenesis promotion, emerges as an innovative skin dressing with the potential for advancing in infected wound healing.

A multifunctional Ag NPs/guar gum hydrogel as versatile platform for catalysts, antibacterial agents, and construction of oil-water separation interfaces

The frequently encountered wastewater contaminations, including soluble aromatic compound and dye pollutants, pathogenic bacteria, and insoluble oils, have resulted in significant environmental and human health issues. It poses a challenge to utilize identical materials for the treatment of complex wastewater. Herein, in this research, multifunctional Ag NPs/guar gum hybrid hydrogels were fabricated using a facile in situ reduction and self-crosslinking method for efficient remediation of complex wastewater. The Ag NPs/guar gum hybrid hydrogel showed remarkable remodeling, adhesive, and self-healing characteristics, which was favorable for its versatile applications. The combination of Ag NPs with the guar gum skeleton endowed the hybrid hydrogel with exceptional catalytic activity for reducing aromatic compounds and dye pollutants, as well as remarkable antibacterial efficacy against pathogenic bacteria. In addition, the Ag NPs/guar gum hybrid hydrogel could be employed to coat a variety of substrates, including cotton fabrics and stainless steel meshes. The hydrogel coated cotton fabrics and meshes presented superhydrophilicity/underwater superoleophobicity, excellent antifouling capacity, and outstanding recyclability, which could be successfully applied for efficient separation of oil-water mixtures. The findings of this work provide a feasible and cost-effective approach for the remediation of intricate wastewater.

Green, pH-Sensitive, Highly Stretchable, and Hydrogen Bond-Dominated Ionogel for Wound Healing Activity

Traditional hydrogel dressings generally have poor mechanical properties and stability when subjected to external stress due to the undesirable chain entanglement structure of their single valence bond compositions. Therefore, it is particularly important to develop a type of gel dressing with good mechanical strength, stability, and environment-friendly monitoring. In this work, a transparent, pH-sensitive, highly stretchable, and biocompatible anthocyanidin ionogel dressing was prepared, realizing green and accurate detection. Attributed to the antibacterial activity of the ionic liquid, the biocompatibility of the pectin, and the ability to scavenge free radicals of the anthocyanidin, the ionogel dressing exhibited excellent re-epithelialization in the 14 day wound healing process. Besides, changes in pH values monitoring of the ionogel over 3 days coincided with normal wound exudate. The obtained ionogel also showed good water retention, swelling properties, mechanical stretchability, and 5 week stability, illustrating great potential in wound dressings.

A nanozyme-reinforced injectable photodynamic hydrogel for combating biofilm infection

Bacterial biofilm-associated infectious diseases remain serious menaces to human health. Recently, photodynamic therapy (PDT) has become a prospective strategy for combating biofilm infection. However, anaerobic conditions in a biofilm greatly inhibit its therapeutic efficacy. Here, a nanozyme-reinforced injectable hydrogel is prepared using Ca2+-crosslinked sodium alginate incorporated with photosensitizer-loaded MnO2 nanosheets and CaO2 nanoparticles for O2 self-sufficient PDT to eradicate biofilm infection. In our design, CaO2 reacts with water to produce locally concentrated H2O2, which could be catalyzed by MnO2 nanosheets (catalase-mimic nanozymes) to generate O2 and greatly relieve the hypoxic conditions in the biofilm, thus significantly strengthening PDT efficacy. In vitro assays confirmed that the hybrid hydrogel not only exhibits high-performance bactericidal activity in combating both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli but also shows great efficacy in eliminating biofilm infection. Moreover, benefiting from its good syringeability, the hybrid hydrogel is prone to fit irregular wounds and exhibits high efficiency in promoting wound healing in a biofilm-infected mice model. Besides, no obvious toxicity is detected in the hybrid hydrogel. Overall, we envision that our designed hydrogel could provide a prospective solution for combating biofilm-associated infections.

Self-Enhanced Antibacterial and Antifouling Behavior of Three-Dimensional Porous Cu2O Nanoparticles Functionalized by an Organic-Inorganic Hybrid Matrix

Cu2O is currently an important protective material for domestic engineering and equipment used to exploit marine resources. Cu+ is considered to have more effective antibacterial and antifouling activities than Cu2+. However, disproportionation of Cu+ in the natural environment leads to its reduced bioavailability and weakened reactivity. Novel and functionalized Cu2O composites could enable efficient and environmentally friendly applications of Cu+. To this end, a series of three-dimensional porous Cu2O nanoparticles (3DNP-Cu2O) functionalized by organic (redox gel, R-Gel)-inorganic (reduced graphene oxide, rGO) hybrids─3DNP-Cu2O/rGOx@R-Gel─at room temperature by immobilization-reduction method was prepared and applied for protection against marine biofouling. 3DNP-Cu2O/rGO1.76@R-Gel includes rGO and R-Gel shape 3D porous Cu2O nanoparticles with diameters ∼177 nm and strong dispersion and antioxidant stability. Compared with commercial Cu2O (Cu2O-0), 3DNP-Cu2O/rGO1.76@R-Gel exhibited an ∼50% higher bactericidal rate, ∼96.22% higher water content, and ∼75% lower adhesion of mussels and barnacles. Moreover, 3DNP-Cu2O/rGOx@R-Gel maintains the same excellent, stable, and long-lasting bactericidal performance as Cu2O-0@R-Gel while reducing the average copper ion release concentration by ∼56 to 76%. This was also confirmed by X-ray diffraction, X-ray photoelectric spectroscopy (XPS), atomic absorption spectroscopy, and antifouling tests. In addition, XPS tests of rGO-Cu2+ and R-Gel-Cu2+, photocurrent tests of 3DNP-Cu2O/rGO1.76@R-Gel, and energy-dispersive spectrometry pictures of bacteria confirm that R-Gel and rGO act as electron donors and transfer substrates driving the reduction of Cu2+ (Cu2+ → Cu+) and the diffusion of Cu+. Thus, a self-growing antibacterial and antifouling system of 3DNP-Cu2O/rGO1.76@R-Gel was achieved. The mechanism of accelerated bacterial inactivation and resistance to mussel and barnacle adhesion by 3DNP-Cu2O/rGO1.76@R-Gel was interpreted. It is shown that rGO and R-Gel are important players in the antibacterial and antifouling system of 3DNP-Cu2O/rGO1.76@R-Gel.

Photothermal/Photoacoustic Therapy Combined with Metal-Based Nanomaterials for the Treatment of Microbial Infections

The increased spread and persistence of bacterial drug-resistant phenotypes remains a public health concern and has contributed significantly to the challenge of combating antibiotic resistance. Nanotechnology is considered an encouraging strategy in the fight against antibiotic-resistant bacterial infections; this new strategy should improve therapeutic efficacy and minimize side effects. Evidence has shown that various nanomaterials with antibacterial performance, such as metal-based nanoparticles (i.e., silver, gold, copper, and zinc oxide) have intrinsic antibacterial properties. These antibacterial agents, such as those made of metal oxides, carbon nanomaterials, and polymers, have been used not only to improve antibacterial efficacy but also to reduce bacterial drug resistance due to their interaction with bacteria and their photophysical properties. These nanostructures have been used as effective agents for photothermal therapy (PTT) and photodynamic therapy (PDT) to kill bacteria locally by heating or the controlled production of reactive oxygen species. Additionally, PTT or PDT therapies have also been combined with photoacoustic (PA) imaging to simultaneously improve treatment efficacy, safety, and accuracy. In this present review, we present, on the one hand, a summary of research highlighting the use of PTT-sensitive metallic nanomaterials for the treatment of bacterial and fungal infections, and, on the other hand, an overview of studies showing the PA-mediated theranostic functionality of metal-based nanomaterials.

Controllable Preparation and Research Progress of Photosensitive Antibacterial Complex Hydrogels

Hydrogels are materials consisting of a network of hydrophilic polymers. Due to their good biocompatibility and hydrophilicity, they are widely used in biomedicine, food safety, environmental protection, agriculture, and other fields. This paper summarizes the typical complex materials of photocatalysts, photosensitizers, and hydrogels, as week as their antibacterial activities and the basic mechanisms of photothermal and photodynamic effects. In addition, the application of hydrogel-based photoresponsive materials in microbial inactivation is discussed, including the challenges faced in their application. The advantages of photosensitive antibacterial complex hydrogels are highlighted, and their application and research progress in various fields are introduced in detail.