A simple electrochemical strategy for the detection of the cancer marker CA19-9 by signal amplification using copper organic framework nanocomposite

A label-free electrochemical biosensor based on a bimetallic organic framework for the detection of carbohydrate antigen 19-9

Carbohydrate antigen 19-9 (CA19-9) is an important marker for pancreatic cancer, ovarian cancer and other tumors, and its rapid and stable detection is the basis for early diagnosis and treatment. In this paper, a label-free electrochemical immunosensor for the sensitive detection of CA19-9 has been developed. First, the synthesis of two novel core-shell bimetallic nanomaterials, namely Ce-MOF-on-Fe-MOF and Fe-MOF-on-Ce-MOF, was accomplished using the MOF-on-MOF approach. The poor electrical conductivity of MOF materials was addressed by incorporating polyethylenimide (PEI) functionalized rGO with Ce-MOF-on-Fe-MOF and Fe-MOF-on-Ce-MOF nanomaterials. Simultaneously, toluidine blue (Tb) was employed as a redox probe and physically adsorbed onto the synthesized materials, resulting in the formation of two nanomaterials: rGO@Ce-MOF-on-Fe-MOF@Tb and rGO@Fe-MOF-on-Ce-MOF@Tb. The fundamental characterization reveals that the sensing performance of the rGO@Ce-MOF-on-Fe-MOF@TB-based immune sensor surpasses that of the rGO@Fe-MOF-on-Ce-MOF@TB-based immune sensor, which is attributed to the fact that, unlike the interlayer-constrained structure of Fe-MOF-on-Ce-MOF, in Ce-MOF-on-Fe-MOF, Ce-MOF penetrates into Fe-MOF to form a heterogeneous structure due to the relatively large pore size of Fe-MOF, which better combines the excellent biocompatibility and strong anchoring effect of Fe MOFs on antibodies, as well as the high electrochemical activity and conductivity of Ce-MOF, to enhance sensing performance. The proposed label-free immunosensor based on rGO@Ce-MOF-on-Fe-MOF@Tb has a wide linear range (1-100 000 mU mL-1), a low detection limit (0.34 mU mL-1), good stability, reproducibility, and repeatability, and satisfactory applicability, which provides a potential platform for clinical applications.

Graphene oxide/Cu-MOF-based electrochemical immunosensor for the simultaneous detection of Mycoplasma pneumoniae and Legionella pneumophila antigens in water

The combination of copper-metal organic framework (Cu-MOF) with graphene oxide (GO) has received growing interest in electrocatalysis, energy storage and sensing applications. However, its potential as an electrochemical biosensing platform remains largely unexplored. In this study, we introduce the synthesis of GO/Cu-MOF nanocomposite and its application in the simultaneous detection of two biomarkers associated with lower respiratory infections, marking the first instance of its use in this capacity. The physicochemical properties and structural elucidation of this composite were studied with the support of XRD, FTIR, SEM and electrochemical techniques. The immunosensor was fabricated by drop casting the nanocomposite on dual screen-printed electrodes followed by functionalization with pyrene linker. The covalent immobilization of the monoclonal antibodies of the bacterial antigens of Mycoplasma pneumoniae (M. pneumoniae; M. p.) and Legionella pneumophila (L. pneumophila; L. p.) was achieved using EDC-NHS chemistry. The differential pulse voltammetry (DPV) signals of the developed immunosensor platform demonstrated a robust correlation across a broad concentration range from 1 pg/mL to 100 ng/mL. The immunosensor platform has shown high degree of selectivity against antigens for various respiratory pathogens. Moreover, the dual immunosensor was successfully applied for the detection of M. pneumoniae and L. pneumophila antigens in spiked water samples showing excellent recovery percentages. We attribute the high sensitivity of the immunosensor to the enhanced electrocatalytic characteristics, stability and conductivity of the GO-MOF composite as well as the synergistic interactions between the GO and MOF. This immunosensor offers a swift analytical response, simplicity in fabrication and instrumentation, rendering it an appealing platform for the on-field monitoring of pathogens in environmental samples.

CTAB-Co-MOFs@AuPt NPs as signal probes for the electrochemical detection of carcinoembryonic antigen 15-3

A sensitive electrochemical strategy for carcinoembryonic antigen 15-3 (CA15-3) detection is reported using CTAB-Co-MOFs@AuPt NPs as signal probes. The electrochemical strategy was designed as follows: First, the graphene aerogel@gold nanoparticles (GA@Au NPs) nanocomposites were employed to modify the sensing surface for promoting electron transfer rate and primary antibody (Ab1) immobilization due to GA possesses a large specific surface area, eminent conductivity, and a 3D network structure. Cobalt metal-organic frameworks (CTAB-Co-MOFs) synthesized were then used as a carrier for AuPt NPs and secondary antibody (Ab2) immobilization (notes: labelled-Ab2). With sandwich immunoreaction, the labelled-Ab2 was captured on the surface of the GA@Au NPs nanocomposites. Finally, differential pulse voltammetry (DPV) was employed to register the electrochemical signal of the immunosensor at the potential of - 0.85 V (vs SCE) in phosphate buffer saline (PBS) containing 2.5 mM H2O2. It was verified that the electrochemical reduction signal from Co3+ to Co2+ was recorded. The AuPt NPs could catalyze the reaction of H2O2 oxidizing Co2+ to Co3+, resulting in the amplification of the electrochemical signal. Under the selected conditions, the immunosensor can detect CA15-3 in the range 10 µU/mL to 250 U/mL with a low detection limit of 1.1 µU/mL. In the designed strategy, the CTAB-Co-MOFs were not only employed as carriers for AuPt NPs, but also acted as signal probes. The CTAB-Co-MOFs were investigated including SEM, TEM, XPS, and XRD. The application ability of the immunosensor was evaluated using serum sample, demonstrating the immunosensor can be applied to clinic serum analysis.