Interfacial host-guest complexation for inverted perovskite solar cells

Perovskite solar cells have demonstrated exceptional development over the past decade, but their stability remains a challenge toward the application of this technology. Several strategies have been used to address this, and the use of host-guest complexation has recently attracted more interest. However, this approach has primarily been exploited in conventional perovskite solar cells based on n-i-p architectures, while its use in inverted p-i-n devices remains unexplored. Herein, we employ representative crown ether, dibenzo-24-crown-8, for interfacial host-guest complexation in inverted perovskite solar cells based on methylammonium and methylammonium-free formamidinium-cesium halide perovskite compositions. Upon post-treatment of the perovskite films, we observed nanostructures on the surface that were associated with the reduced amount of trap states at the interface with the electron transport layer. As a result, we demonstrate improved efficiencies and operational stabilities following ISOS-D-2I and ISOS-L-2I protocols, demonstrating the viability of this approach to advance device stability.

Activation of fluoride anion as nucleophile in water with data-guided surfactant selection

A principal component surfactant_map was developed for 91 commonly accessible surfactants for use in surfactant-enabled organic reactions in water, an important approach for sustainable chemical processes. This map was built using 22 experimental and theoretical descriptors relevant to the physicochemical nature of these surfactant-enabled reactions, and advanced principal component analysis algorithms. It is comprised of all classes of surfactants, i.e. cationic, anionic, zwitterionic and neutral surfactants, including designer surfactants. The value of this surfactant_map was demonstrated in activating simple inorganic fluoride salts as effective nucleophiles in water, with the right surfactant. This led to the rapid development (screening 13-15 surfactants) of two fluorination reactions for β-bromosulfides and sulfonyl chlorides in water. The latter was demonstrated in generating a sulfonyl fluoride with sufficient purity for direct use in labelling of chymotrypsin, under physiological conditions.

Nucleophilic Reactions Using Alkali Metal Fluorides Activated by Crown Ethers and Derivatives

We review crown ether-facilitated nucleophilic reactions using metal salts, presenting the studies using kinetic measurements and quantum chemical methods. We focus on the mechanistic features, specifically on the contact ion-pair (CIP) mechanism of metal salts for nucleophilic processes promoted by crown ethers and derivatives. Experimental verification of the CIP form of the metal salt CsF complexed with [18-Crown-6] by H-NMR spectroscopy is described. The use of chiral crown ethers and derivatives for enantioselective nucleophilic processes is also discussed.

Real-Time High-Sensitivity Reaction Monitoring of Important Nitrogen-Cycle Synthons by 15N Hyperpolarized Nuclear Magnetic Resonance

Here, we show how signal amplification by reversible exchange hyperpolarization of a range of ¹⁵N-containing synthons can be used to enable studies of their reactivity by ¹⁵N nuclear magnetic resonance (NO₂^– (28% polarization), ND₃ (3%), PhCH₂NH₂ (5%), NaN₃ (3%), and NO₃^– (0.1%)). A range of iridium-based spin-polarization transfer catalysts are used, which for NO₂^– work optimally as an amino-derived carbene-containing complex with a DMAP-d₂ coligand. We harness long ¹⁵N spin-order lifetimes to probe in situ reactivity out to 3 × T₁. In the case of NO₂^– (T₁ 17.7 s at 9.4 T), we monitor PhNH₂ diazotization in acidic solution. The resulting diazonium salt (¹⁵N-T₁ 38 s) forms within 30 s, and its subsequent reaction with NaN₃ leads to the detection of hyperpolarized PhN₃ (T₁ 192 s) in a second step via the formation of an identified cyclic pentazole intermediate. The role of PhN₃ and NaN₃ in copper-free click chemistry is exemplified for hyperpolarized triazole (T₁ < 10 s) formation when they react with a strained alkyne. We also demonstrate simple routes to hyperpolarized N₂ in addition to showing how utilization of ¹⁵N-polarized PhCH₂NH₂ enables the probing of amidation, sulfonamidation, and imine formation. Hyperpolarized ND₃ is used to probe imine and ND₄⁺ (T₁ 33.6 s) formation. Furthermore, for NO₂^–, we also demonstrate how the ¹⁵N-magnetic resonance imaging monitoring of biphasic catalysis confirms the successful preparation of an aqueous bolus of hyperpolarized ¹⁵NO₂^– in seconds with 8% polarization. Hence, we create a versatile tool to probe organic transformations that has significant relevance for the synthesis of future hyperpolarized pharmaceuticals.

Rapid and Simple Access to α-(Hetero)arylacetonitriles from Gem-Difluoroalkenes

A scalable cyanation of gem-difluoroalkenes to (hetero)arylacetonitrile derivatives was developed. This strategy features mild reaction conditions, excellent yields, wide substrate scope, and broad functional group tolerance. Significantly, in this reaction, aqueous ammonia offers a "N" source for the "CN" reagent and entirely avoids the use of toxic cyanating reagents or metal catalysis. Hence, we provide a green and alternative method for the synthesis of arylacetonitriles.

Multimodal host-guest complexation for efficient and stable perovskite photovoltaics

Formamidinium lead iodide perovskites are promising light-harvesting materials, yet stabilizing them under operating conditions without compromising optimal optoelectronic properties remains challenging. We report a multimodal host–guest complexation strategy to overcome this challenge using a crown ether, dibenzo-21-crown-7, which acts as a vehicle that assembles at the interface and delivers Cs⁺ ions into the interior while modulating the material. This provides a local gradient of doping at the nanoscale that assists in photoinduced charge separation while passivating surface and bulk defects, stabilizing the perovskite phase through a synergistic effect of the host, guest, and host–guest complex. The resulting solar cells show power conversion efficiencies exceeding 24% and enhanced operational stability, maintaining over 95% of their performance without encapsulation for 500 h under continuous operation. Moreover, the host contributes to binding lead ions, reducing their environmental impact. This supramolecular strategy illustrates the broad implications of host–guest chemistry in photovoltaics.

It remains a challenge to achieve a balance between performance and stability, as well as addressing the environmental impact of perovskite solar cells. Here, the authors propose a multimodal host-guest complexation strategy enabling these shortcomings to be addressed simultaneously.

Crown Ether Modulation Enables over 23% Efficient Formamidinium-Based Perovskite Solar Cells

The use of molecular modulators to reduce the defect density at the surface and grain boundaries of perovskite materials has been demonstrated to be an effective approach to enhance the photovoltaic performance and device stability of perovskite solar cells. Herein, we employ crown ethers to modulate perovskite films, affording passivation of undercoordinated surface defects. This interaction has been elucidated by solid-state nuclear magnetic resonance and density functional theory calculations. The crown ether hosts induce the formation of host-guest complexes on the surface of the perovskite films, which reduces the concentration of surface electronic defects and suppresses nonradiative recombination by 40%, while minimizing moisture permeation. As a result, we achieved substantially improved photovoltaic performance with power conversion efficiencies exceeding 23%, accompanied by enhanced stability under ambient and operational conditions. This work opens a new avenue to improve the performance and stability of perovskite-based optoelectronic devices through supramolecular chemistry.

Reversed Cation Selectivity of G8 -Octamer and G16 -Hexadecamer towards Monovalent and Divalent Cations

A reverse-binding-selectivity between monovalent and divalent cations was observed for two different self-assembly G16 -hexadecamer and G8 -octamer systems. The dissociation constant between G4 -quadruplex and monomer was calculated via VT-1 H NMR experiments. Quantitative energy profiles revealed entropy as the key factor for the weaker binding toward Ba2+ compared with K+ in the G8 -octamer system despite stronger ion-dipole interactions. This study is the first direct comparison of the G4 -quartet binding affinity between mono and divalent cations and will benefit future applications of G-quadruplex-related research. Further competition experiments between the G8 -octamer and 18-crown-6 with K+ demonstrated the potential of this G8 system as a new potassium receptor.

Unprecedented Diastereoselective Arylogous Michael Addition of Unactivated Phthalides

The first highly enantioselective arylogous Michael reaction (AMR) of 3-unsubstituted phthalides has been described. This phase-transfer methodology, which uses catalytic amounts of KOH/18-crown-6 catalyst in mesitylene in the presence of N,O-bis(trimethylsilyl)acetamide (BSA), gives access to a broad range of 3-monosubstituted phthalides with high levels of syn diastereoselectivity and good yields, starting from 3-unsubstituted derivatives and diverse α,β-unsaturated carbonyl compounds. The reaction also applies to unactivated 3-alkyl phthalides to afford 3,3-dialkyl derivatives. A plausible mechanism has been suggested. DFT analysis of possible transition states gives a rationale of the high syn diastereoselectivity observed and its correlation with the solvent's dielectric constant.