Effect of specific proteolytic cleavages on tubulin polymer formation

α-tubulin tail modifications regulate microtubule stability through selective effector recruitment, not changes in intrinsic polymer dynamics

Microtubules are non-covalent polymers of αβ-tubulin dimers. Posttranslational processing of the intrinsically disordered C-terminal α-tubulin tail produces detyrosinated and Δ2-tubulin. Although these are widely employed as proxies for stable cellular microtubules, their effect (and of the α-tail) on microtubule dynamics remains uncharacterized. Using recombinant, engineered human tubulins, we now find that neither detyrosinated nor Δ2-tubulin affect microtubule dynamics, while the α-tubulin tail is an inhibitor of microtubule growth. Consistent with the latter, molecular dynamics simulations show the α-tubulin tail transiently occluding the longitudinal microtubule polymerization interface. The marked differential in vivo stabilities of the modified microtubule subpopulations, therefore, must result exclusively from selective effector recruitment. We find that tyrosination quantitatively tunes CLIP-170 density at the growing plus end and that CLIP170 and EB1 synergize to selectively upregulate the dynamicity of tyrosinated microtubules. Modification-dependent recruitment of regulators thereby results in microtubule subpopulations with distinct dynamics, a tenet of the tubulin code hypothesis.

Microtubules are reorganised and fragmented for uterine receptivity

For the development of uterine receptivity, many morphological and molecular changes occur in the apical surface of luminal uterine epithelial cells (UECs) including an increase in vesicular activity. Vesicular movements for exocytosis and endocytosis are dependent on microtubules; however, changes in microtubules in UECs during early pregnancy have received little attention. β-tubulin, one of the main component of microtubules, is distributed throughout the cytoplasm of UECs on day 1 (non-receptive) of pregnancy in the rat. On day 5.5, β-tubulin is concentrated above the nuclei and by day 6 (receptive), β-tubulin is concentrated in a band-like fashion above the nucleus. Western blot analysis of isolated UECs found two bands (50 and 34 kDa) for β-tubulin in UECs during early pregnancy. The intensity of the 34 kDa band was significantly higher on day 6 compared to day 1. The increase in the 34 kDa band may be due to higher proteolytic activity associated with microtubule polymerisation during the receptive state. Transmission electron microscopy showed fragmented microtubules at the time of receptivity in UECs. This is the first study to show that microtubules are reorganised during uterine receptivity. This re-organisation likely facilitates vesicular movement and promotes the reorganisation of the apical plasma membrane for uterine receptivity.

Regulation of microtubule dynamic instability by the carboxy-terminal tail of β-tubulin

This work examines how the carboxy-terminal tail domain of β-tubulin governs microtubule dynamic instability and the structure of plus ends using complementary in vivo and in vitro experiments.

Dynamic instability is an intrinsic property of microtubules; however, we do not understand what domains of αβ-tubulins regulate this activity or how these regulate microtubule networks in cells. Here, we define a role for the negatively charged carboxy-terminal tail (CTT) domain of β-tubulin in regulating dynamic instability. By combining in vitro studies with purified mammalian tubulin and in vivo studies with tubulin mutants in budding yeast, we demonstrate that β-tubulin CTT inhibits microtubule stability and regulates the structure and stability of microtubule plus ends. Tubulin that lacks β-tubulin CTT polymerizes faster and depolymerizes slower in vitro and forms microtubules that are more prone to catastrophe. The ends of these microtubules exhibit a more blunted morphology and rapidly switch to disassembly after tubulin depletion. In addition, we show that β-tubulin CTT is required for magnesium cations to promote depolymerization. We propose that β-tubulin CTT regulates the assembly of stable microtubule ends and provides a tunable mechanism to coordinate dynamic instability with ionic strength in the cell.

Mobility and Core-Protein Binding Patterns of Disordered C-Terminal Tails in β-Tubulin Isotypes

Although they play a significant part in the regulation of microtubule structure, dynamics, and function, the disordered C-terminal tails of tubulin remain invisible to experimental structural methods and do not appear in the crystallographic structures that are currently available in the Protein Data Bank. Interestingly, these tails concentrate most of the sequence variability between tubulin isotypes and are the sites of the principal post-translational modifications undergone by this protein. Using homology modeling, we developed two complete models for the human αI/βI- and αI/βIII-tubulin isotypes that include their C-terminal tails. We then investigated the conformational variability of the two β-tails using long time-scale classical molecular dynamics simulations that revealed similar features, notably the unexpected presence of common anchoring regions on the surface of the tuulin dimer, but also distinctive mobility or interaction patterns, some of which could be related to the tail lengths and charge distributions. We also observed in our simulations that the C-terminal tail from the βI isotype, but not the βIII isotype, formed contacts in the putative binding site of a recently discovered peptide that disrupts microtubule formation in glioma cells. Hindering the binding site in the βI isotype would be consistent with this peptide's preferential disruption of microtubule formation in glioma, whose cells overexpress βIII, compared to normal glial cells. While these observations need to be confirmed with more intensive sampling, our study opens new perspectives for the development of isotype-specific chemotherapy drugs.

George M, Freedman H, Barakat KH, Damaraju S, Hameroff S, Tuszynski JA. Computational predictions of volatile anesthetic interactions with the microtubule cytoskeleton: implications for side effects of general anesthesia

The cytoskeleton is essential to cell morphology, cargo trafficking, and cell division. As the neuronal cytoskeleton is extremely complex, it is no wonder that a startling number of neurodegenerative disorders (including but not limited to Alzheimer's disease, Parkinson's disease and Huntington's disease) share the common feature of a dysfunctional neuronal cytoskeleton. Recently, concern has been raised about a possible link between anesthesia, post-operative cognitive dysfunction, and the exacerbation of neurodegenerative disorders. Experimental investigations suggest that anesthetics bind to and affect cytoskeletal microtubules, and that anesthesia-related cognitive dysfunction involves microtubule instability, hyper-phosphorylation of the microtubule-associated protein tau, and tau separation from microtubules. However, exact mechanisms are yet to be identified. In this paper the interaction of anesthetics with the microtubule subunit protein tubulin is investigated using computer-modeling methods. Homology modeling, molecular dynamics simulations and surface geometry techniques were used to determine putative binding sites for volatile anesthetics on tubulin. This was followed by free energy based docking calculations for halothane (2-bromo-2-chloro-1,1,1-trifluoroethane) on the tubulin body, and C-terminal regions for specific tubulin isotypes. Locations of the putative binding sites, halothane binding energies and the relation to cytoskeleton function are reported in this paper.

Molecular dynamics modeling of tubulin C-terminal tail interactions with the microtubule surface

Tubulin, an α/β heterodimer, has had most of its 3D structure analyzed; however, the carboxy (C)-termini remain elusive. Importantly, the C-termini play critical roles in regulating microtubule structure and function. They are sites of most of the post-translational modifications of tubulin and interaction sites with molecular motors and microtubule-associated proteins. Simulated annealing was used in our molecular dynamics modeling to predict the interactions of the C-terminal tails with the tubulin dimer. We examined differences in their flexibility, interactions with the body of tubulin, and the existence of structural motifs. We found that the α-tubulin tail interacts with the H11 helix of β-tubulin, and the β-tubulin tail interacts with the H11 helix of α-tubulin. Tail domains and H10/B9 loops interact with each other and compete for interactions with positively-charged residues of the H11 helix on the neighboring monomer. In a simulation in which α-tubulin's H10/B9 loop switches on sub-nanosecond intervals between interactions with the C-terminal tail of α-tubulin and the H11 helix of β-tubulin, the intermediate domain of α-tubulin showed more fluctuations compared to those in the other simulations, indicating that tail domains may cause shifts in the position of this domain. This suggests that C-termini may affect the conformation of the tubulin dimer which may explain their essential function in microtubule formation and effects on ligand binding to microtubules. Our modeling also provides evidence for a disordered-helical/helical double-state system of the T3/H3 region of the microtubule, which could be linked to depolymerization following GTP hydrolysis.

Prion protein region 23-32 interacts with tubulin and inhibits microtubule assembly

In previous studies we have demonstrated that prion protein (PrP) binds directly to tubulin and this interaction leads to the inhibition of microtubule formation by inducement of tubulin oligomerization. This report is aimed at mapping the regions of PrP and tubulin involved in the interaction and identification of PrP domains responsible for tubulin oligomerization. Preliminary studies focused our attention to the N-terminal flexible part of PrP encompassing residues 23-110. Using a panel of deletion mutants of PrP, we identified two microtubule-binding motifs at both ends of this part of the molecule. We found that residues 23-32 constitute a major site of interaction, whereas residues 101-110 represent a weak binding site. The crucial role of the 23-32 sequence in the interaction with tubulin was confirmed employing chymotryptic fragments of PrP. Surprisingly, the octarepeat region linking the above motifs plays only a supporting role in the interaction. The binding of Cu(2+) to PrP did not affect the interaction. We also demonstrate that PrP deletion mutants lacking residues 23-32 exhibit very low efficiency in the inducement of tubulin oligomerization. Moreover, a synthetic peptide corresponding to this sequence, but not that identical with fragment 101-110, mimics the effects of the full-length protein on tubulin oligomerization and microtubule assembly. At the cellular level, peptide composed of the PrP motive 23-30 and signal sequence (1-22) disrupted the microtubular cytoskeleton. Using tryptic and chymotryptic fragments of alpha- and beta-tubulin, we mapped the docking sites for PrP within the C-terminal domains constituting the outer surface of microtubule.

Roles of beta-tubulin residues Ala428 and Thr429 in microtubule formation in vivo

The C termini of beta-tubulin isotypes are regions of high sequence variability that bind to microtubule-associated proteins and motors and undergo various post-translational modifications such as polyglutamylation and polyglycylation. Crystallographic analyses have been unsuccessful in resolving tubulin C termini. Here, we used a stepwise approach to study the role of this region in microtubule assembly. We generated a series of truncation mutants of human betaI and betaIII tubulin. Transient transfection of HeLa cells with the mutants shows that mutants with deletions of up to 22 residues from betaIII and 16 from betaI can assemble normally. Interestingly, removal of the next residue (Ala(428)) results in a complete loss of microtubule formation without affecting dimer formation. C-terminal tail switching of human betaI and betaIII tubulin suggests that C-terminal tails are functionally equivalent. In short, residues outside of 1-429 of human beta-tubulins make no contribution to microtubule assembly. Ala(428), in the C-terminal sequence motif N-QQYQDA(428), lies at the end of helix H12 of beta-tubulin. We hypothesize that this residue is important for maintaining helix H12 structure. Deletion of Ala(428) may lead to unwinding of helix H12, resulting in tubulin dimers incapable of assembly. Thr(429) plays a more complex role. In the betaI isotype of tubulin, Thr(429) is not at all necessary for assembly; however, in the betaIII isotype, its presence strongly favors assembly. This result is consistent with a likely more complex function of betaIII as well as with the observation that evolutionary conservation is total for Ala(428) and frequent for Thr(429).

The molecular nature of benzimidazole resistance in helminths

The economic importance of benzimidazole (BZ) resistance has resulted in the isolation of resistant populations of helminths and their study (see pp 127-129 this issue). Recent research indicates that BZs act by binding to free beta-tubulin in the cell and inhibiting the formation of microtubules. The effects of BZs on other processes in the cell, such as transport and anaerobic metabolism, probably result from the inhibition of one or more of the functions of tubulin (see pp 112-115, this issue). In this article, Marleen Roos examines the evidence for changes in the beta-tubulin structure and the rate of its synthesis in BZ-resistant parasitic nematodes.

Conformational properties of alpha-tubulin tail peptide: implications for tail-body interaction

The carboxy-terminal segments of the alpha/beta-tubulins are flexible regions rich in acidic amino acid residues. It is generally believed that these regions play crucial roles in tubulin polymerization and interaction with many ligands, including colchicine. Exactly how these effects are exerted are not known at present. One such interesting aspect is the pH dependence of colchicine-tubulin interaction and the influence of the alpha-tail on the binding interaction. We have investigated the location of the colchicine-binding site on tubulin by docking. It has been located on the alpha/beta interface on the N-terminal side, which is also supported by much of the solution data. This location is too far from the tail regions, suggesting that influence of the tail region is transmitted by a pH-dependent conformational change. Two-dimensional NMR studies indicate that at pH 7 a 13-residue peptide corresponding to alpha-tubulin tail shows little NOE constraints, suggesting extended conformation. On the contrary, at pH 5, a relatively compact structure was deduced from the interproton NOE constraints. Pulsed field gradient measurement of diffusion constant indicates that the peptide at pH 5 is substantially faster diffusing than at pH 7. The Perrin factors calculated from diffusion data indicates that the peptide structure at pH is significantly more compact than at pH 7. Temperature coefficients of several amide protons at pH 5 fall below 5 ppb/(o)K, indicating a degree of protection. A difference is also seen in the CD spectra obtained at different pHs, consistent with the NMR data. We have investigated the probable spatial organization of the tail of the alpha-subunit of tubulin, in the high pH extended form and the low pH compact form. On the basis of correlation of pH dependence of many properties of tubulin and the conformation of the alpha-tail peptide, we propose that the intrinsic conformational preference of the tail-region modulate the tail-body interaction, which in turn has important bearing on colchicine binding properties.

Structure of tubulin C-terminal domain obtained by subtilisin treatment The major α and β tubulin isotypes from pig brain are glutamylated

Limited subtilisin digestion of the tubulin alpha, beta heterodimer has been used in this work to reduce the total number of tubulin isotypes from 20 for native to 9 for subtilisin-cleaved tubulin. This indicates that the major part of tubulin heterogeneity is located at the C-terminus of the molecule. The C-terminal peptides of both alpha and beta subunits of tubulin were purified by anion-exchange HPLC. Combined use of Edman degradation chemistry and mass spectrometry on the isolated peptides shows that subtilisin cleavage occurs at position Asp-438 and His-406 of alpha and Gln-433 and His-396 of beta tubulin chains. Quantitative analysis of our data show that cleavage at positions His-406 (alpha) and His-396 (beta) occurs with a low efficiency and indicates that the major isotypes of pig brain tubulin are modified by sequential attachment of 1 to 5 glutamic acid residues at positions Glu-445 or -435 of alpha and beta tubulin, respectively.

Preparation and properties of pure tubulin S

Limited proteolysis of the tubulin dimer (alphabeta) by subtilisin occurs more rapidly with beta than with alpha tubulin. This leads to the formation of an intermediate hybrid dimer, alphabeta(s), before both C termini are cleaved to form tubulin S(alpha(s)beta(s)). The three forms of tubulin usually coexist in subtilisin-treated preparations and such cross-contamination can be reliably detected only by running SDS-polyacrylamide gels well beyond expulsion of the dye front. Previously published preparations have not ruled out such contamination or have formed poorly reversible polymers. Because ion exchange separation incurred substantial protein losses, we have developed a new protocol for rapid preparation of tubulin S (alpha(s)beta(s), free of alphabeta or alphabeta(s)) that is based on proteolysis at low ionic strength. This increases the relative rate of C terminal cleavage of beta tubulin. The product forms sheets, bundles, or rings that are depolymerized by cold, salt, and podophyllotoxin, partially depolymerized by Ca2+, and has a decreased critical concentration for polymerization that can be further decreased by taxol. We have also found a method for forming nearly pure alphabeta(s) dimers by using methods that retard proteolysis of the C terminus of alpha tubulin.

Microtubule assembly in cold-adapted organisms: functional properties and structural adaptations of tubulins from antarctic fishes

Fishes native to the coastal waters of the Antarctic have adapted to habitat and body temperatures in the range -1.8 to +2 degrees C. Their cytoplasmic microtubules, unlike those of mammals and temperate poikilotherms, have evolved to assemble efficiently at these low temperatures. To learn about the underlying molecular adaptations, my laboratory is studying microtubule proteins [tubulin alpha beta dimers and microtubule-associated proteins (MAPs)] and tubulin genes from several Antarctic fishes, including the rockcods Notothenia coriiceps and Gobionotothen gibberifrons. We find that the assembly-enhancing adaptations of the fish microtubule proteins are intrinsic to the tubulin subunits themselves. Furthermore, microtubule formation by Antarctic fish tubulins is strongly entropy driven, due in part to an increased reliance, relative to tubulins from other species, on hydrophobic interactions. Based on analyses of tubulin polypeptides and cDNAs, we suggest that the structural adaptations of Antarctic fish tubulins most likely involve alterations in the primary sequences of tubulin isotypes. With respect to neural beta tubulins from other vertebrates, for example, the class II beta-tubulin isotype of N. coriiceps brain contains seven unique amino acid substitutions and one novel insertion in its 446-residue primary sequence. Most of these changes are located in a structural domain that forms contacts between tubulin dimers during microtubule assembly and would be expected to enhance polypeptide flexibility, thereby facilitating addition of tubulin to microtubule ends. The acidic carboxy-terminal tails of the alpha and beta tubulins, by contrast, appear not to be sites of cold adaptation of polymerization. We have also found that brain and egg tubulins from Antarctic fishes differ strikingly in their polymerization efficiencies, which demonstrates, in agreement with the multitubulin hypothesis, that tissue-specific tubulin isoforms can possess distinct functional properties. Thus, study of microtubule proteins from organisms, such as the Antarctic fishes, that have adapted to extreme thermal regimes should contribute significantly to an understanding of the quaternary interactions that control microtubule assembly in all eukaryotes.

Cation selective promotion of tubulin polymerization by alkali metal chlorides

A role for charge-based interactions in protein stability at the monomer or dimer level is well known. We show here that such interactions can also be important for the higher-order structures of microtubule assembly. Alkali metal chlorides increase the rate of polymerization of pure tubulin driven by either taxol or dimethyl sulfoxide. The effect is cation selective, exhibiting a sequence Na+ > K+ > Li+ > Cs+, with optimal concentrations for Na+ at approximately 160 mM. Hofmeister anion effects are additive with these rate stimulations. Sodium is less potent than guanidinium ion stimulation reported previously, but produces a larger fraction of normal microtubules. Alkali metal cations lower the critical concentration by a factor of approximately 2, produce cold reversible polymers whose formation is sensitive to podophyllotoxin inhibition, increase the fraction of polymers present as microtubules from approximately 0.9 to 0.99, and reverse or prevent urea-induced depolymerization of microtubules. In the presence of microtubule-associated proteins, the promotion of polymerization is no longer cation selective. In the polymerization of tubulin S, in which the acidic C termini of both monomers have been cleaved, the cation enhancement is markedly decreased, although selective persists. Because the selectivity sequence is similar to that of the coil/helix transition of polyglutamic acid, we suggest that a major part, although not all, of the cation selective enhancement of polymerization results from shielding of the glutamate-rich C termini of the tubulin monomers.

Charge-shielding and the "paradoxical" stimulation of tubulin polymerization by guanidine hydrochloride

Low concentrations of guanidine hydrochloride (GuHCl) increase the rate (and to a lesser degree, the extent) of tubulin polymerization as assessed by light scattering. Maximum enhancement occurs at 120-160 mM GuHCl followed by decreases at higher GuHCl. The latent period is decreased, and there is a 3-4 fold reduction in the critical concentration of polymerization. Electronmicrographs reveal microtubules in the controls and an increasing fraction of total polymers present as aberrant microtubules as the GuHCl concentration is increased from 20 to 100 mM. The GuHCl effect is markedly reduced, but not abolished, in tubulin S (in which the anionic C termini of both monomers have been removed). The GuHCl-induced polymerization has an absolute requirement for GTP and taxol or DMSO, is very sensitive to podophyllotoxin inhibition, and can overcome urea-mediated inhibition of polymerization. Guanidinium analogues mimic the GuHCl effect roughly as a function of the number of potential hydrogen bonds. The anions of the guanidine salts superimpose their inhibitory action on the guanidinium cation effect according to the lyotropic series. At higher GuHCl concentrations (peak effect 500-700 mM), a different polymer (type II) is formed that is GTP and taxol independent, but whose polymerization is retarded but not prevented by podophyllotoxin. Its structure resembles the fibrillar network seen in unfolding intermediates of other proteins. We conclude that both charge and hydrogen-bonding ability are major contributors to the GuHCl-induced promotion of tubulin polymerization, and that charge-shielding is likely to be the basis for this effect.

Stabilization and bundling of subtilisin-treated microtubules induced by microtubule associated proteins

The acidic carboxy-terminal regions of alpha- and beta-tubulin subunits are currently thought to be centrally involved in microtubule stability and in microtubule association with a variety of proteins (MAPs) such as MAP2 and tau proteins. Here, pure tubulin microtubules were exposed to subtilisin to produce polymers composed of cleaved tubulin subunits lacking carboxy termini. Polymer exposure to subtilisin was achieved in buffer conditions compatible with further tests of microtubule stability. Microtubules composed of normal alpha-tubulin and cleaved beta-tubulin were indistinguishable from control microtubules with regard to resistance to dilution-induced disassembly, to cold temperature-induced disassembly and to Ca(2+)-induced disassembly. Microtubules composed of cleaved alpha- and beta-tubulins showed normal sensitivity to dilution-induced disassembly and to low temperature-induced disassembly, but marked resistance to Ca(2+)-induced disassembly. Polymers composed of normal alpha-tubulin and cleaved beta-tubulin or of cleaved alpha- and beta-tubulins were stabilized in the presence of added MAP2, myelin basic protein and histone H1. Cleavage of tubulin carboxy termini greatly potentiated microtubule stabilization by tau proteins. We show that this potentiation of polymer stabilization can be ascribed to tau-induced microtubule bundling. In our working conditions, such bundling upon association with tau proteins occurred only in the case of microtubules composed of cleaved alpha- and beta-tubulins and triggered apparent microtubule cross-stabilization among the bundled polymers. These results, as well as immunofluorescence analysis, which directly showed interactions between subtilisin-treated microtubules and MAPs, suggest that the carboxy termini of alpha- and beta-tubulins are not primarily involved in the binding of MAPs onto microtubules. However, interactions between tubulin carboxy termini and MAPs remain possible and might be involved in the regulation of MAP-induced microtubule bundling.

Mutations in the Caenorhabditis elegans beta-tubulin gene mec-7: effects on microtubule assembly and stability and on tubulin autoregulation

We have sequenced 45 mutations in mec-7, a beta-tubulin gene required for the production of 15-protofilament microtubules in the nematode Caenorhabditis elegans, and have correlated sequence alterations with mutant phenotypes. The expression patterns of most alleles have also been determined by in situ hybridization and immunocytochemistry. Most (12/16) complete loss-of-function alleles, which are recessive, result from nonsense mutations, insertions, or deletions; three others disrupt a putative GTP-binding domain. Three of the four loss-of-function, missense mutations result in elevated mec-7 message levels, suggesting a defect in tubulin autoregulation that may be attributable to a loss in the ability to form heterodimers. Most (8/9) mild alleles are caused by missense mutations. Two mild alleles appear to increase microtubule stability and lead to the elaboration of ectopic neuronal processes in mec-7-expressing cells. Most (15/23) mutations that cause severe dominant or semidominant phenotypes are clustered into three discrete domains; four others occur in putative GTP-binding regions. Many of these dominant mutations appear to completely disrupt microtubule assembly.

Glycolytic enzyme-tubulin interactions: role of tubulin carboxy terminals

Tubulin and microtubules were modified with the protease, subtilisin. The modification reduced the length of alpha- or beta-tubulin by cleaving a peptide fragment from the C-terminals. Generation of alpha'beta'-tubulin, which is cleaved at both the alpha- and beta-subunit terminals, and alpha beta'-tubulin, which is cleaved at the beta-subunit C-terminal, have already been reported. In this work an isotype, alpha'beta-tubulin, was produced. The three modified tubulin isotypes were compared for their ability to interact with glycolytic enzymes. Cleavage of alpha led to a poorer interaction when tested via affinity chromatography. Tubulin also inhibits the activity of aldolase and glyceraldehyde 3-phosphate dehydrogenase. When the alpha-subunit C-terminal was intact, inhibition was greatest. These results imply that the C-terminal of the tubulin alpha-subunit is responsible for interactions with glycolytic enzymes.

Multiple sites for subtilisin cleavage of tubulin: effects of divalent cations

Limited digestion of pig brain GDP-tubulin by subtilisin was carried out in the presence of Mg2+, Mn2+, Ca2+, Zn2+, or Be2+. Isoelectric focusing, followed by SDS-PAGE, revealed characteristic divalent cation-dependent changes in the alpha- and beta-tubulin cleavage patterns. Previous studies revealed that the beta-cleavage pattern is different for heterodimers and microtubules [Lobert and Correia, 1992: Arch. Biochem. Biophys. 296: 152-160]. Divalent cation effects on subtilisin digestion of tubulin indicate different classes of divalent cation binding sites. Western blot analysis locates the proteolytic zone at residue 430 or higher in both subunits for all conditions. Turbidity and electron microscopy reveal that GDP-tubulin cleaved by subtilisin in the presence of Mg2+, Ca2+, or Mn2+ forms sheets of rings. Mn2+ induces ring formation in uncleaved GDP-tubulin. Isotype-depleted tubulin was generated by the removal of class III beta-tubulin using immunoaffinity chromatography. Subtilisin digestion of the depleted fraction and the purified class III beta-tubulin demonstrates that cleavage occurs at three to four distinct sites. Thus, subtilisin-digested tubulin is more heterogeneous than was previously reported and the cleavage sites depend on solution conditions, divalent cations, and the state of assembly. This has important implications for experiments that utilize subtilisin-digested tubulin for studying microtubule-associated protein binding.

Substoichiometric inhibition of microtubule formation by acetaldehyde-tubulin adducts

We have shown previously that acetaldehyde forms stable covalent adducts with tubulin, resulting in impaired microtubule formation. The present study explored the mechanism responsible for impaired microtubule formation caused by the substoichiometric stable binding of acetaldehyde to tubulin. The free tubulin dimer was much more reactive with acetaldehyde than microtubules, binding more than twice as much aldehyde. The dimer also formed nearly twice as many stable adducts on its alpha-chain as on its beta-chain, whereas microtubules exhibited an equal distribution of adducts between the two subunits. These data confirm that the alpha-chain of free tubulin, but not microtubules, has an accessible highly reactive lysine (HRL) residue that is a preferential target of acetaldehyde binding. Adduct formation with the HRL residue also correlated with impaired tubulin polymerization, and only 0.08 moles of acetaldehyde bound per mole of HRL was required for complete inhibition; however, adducts with other lysine residues (bulk adducts) did not affect assembly. Adducts to microtubule-associated proteins (MAPs) also impaired the assembly of tubulin, but were much less effective than HRL adducts. In a copolymerization assay, HRL-adducted tubulin, in addition to being itself assembly incompetent, also interfered with polymerization of normal (unadducted) tubulin. Bulk adducts did not alter assembly and were incorporated normally into the growing polymer. When tubulin was cleaved by the proteolytic enzyme, subtilisin, microtubule formation could readily take place in the absence of MAPs. In this polymerization system, HRL adducts, but not bulk adducts, still markedly inhibited assembly. When low concentrations of acetaldehyde (50 microM) were used to generate HRL adducts, an adduct on only 1 out of 20 tubulin molecules was sufficient to totally block polymerization. These findings indicate that substoichiometric amounts of acetaldehyde bound to HRL of tubulin can markedly inhibit microtubule formation via direct interference of dimer-dimer interactions, and further suggest that low concentrations of acetaldehyde could generate sufficient amounts of HRL adducts in cellular systems to alter microtubule formation and function.

Subtilisin cleavage of tubulin heterodimers and polymers

Native pig brain tubulin in heterodimer or polymer form was subjected to limited proteolysis by subtilisin, which is known to cleave at accessible sites within the last 50 amino acids of the highly variable carboxyl-termini of the alpha and beta subunits. Heterodimeric tubulin or tubulin polymerized in the presence of 4 M glycerol or taxol was used in these experiments. Digested tubulin was purified by cycles of polymerization and depolymerization, ammonium sulfate precipitation, or ion-exchange chromatography in the absence or presence of nonionic detergent; however, smaller cleaved products of about 34,000 to 40,000 MW remained associated with the major cleaved subunits, alpha' and beta', under all purification conditions. In order to determine the effect of subtilisin cleavage on tubulin heterogeneity, purified native or subtilisin-cleaved tubulin was subjected to isoelectric focusing, followed by SDS-PAGE. The total number of isotypes was reduced from 17-22 for native alpha,beta tubulin to 7-9 for subtilisin-cleaved alpha',beta' tubulin. When tubulin heterodimers were cleaved, a single major beta' isotype was evident; however, when tubulin polymerized in 4 M glycerol was cleaved, two major beta' isotypes were found. Monoclonal antibodies that recognize a beta carboxyl-terminal peptide, residues 410-430, reacted with both major beta' isotypes, indicating that subtilisin cleavage occurred within the last 20 of the 450 amino acids. In order to establish whether this difference was in fact associated with polymer or heterodimer forms of tubulin, digestion was carried out in the presence of taxol, which stabilizes tubulin polymers. A single major beta' isotype different from the cleaved heterodimer, but coincident with one of the bands of the cleaved glycerol-induced polymers, was found when taxol-treated tubulin was digested. This result suggests the presence of more than one subtilisin site in the beta subunit, near residues 430-435, with different accessibility to the enzyme in the heterodimer and polymer form.

Bundling of microtubules by synapsin 1. Characterization of bundling and interaction of distinct sites in synapsin 1 head and tail domains with different sites in tubulin

Synapsin 1 is a nerve terminal phosphoprotein whose role seems to encompass the linking of small synaptic vesicles to the cytoskeleton. Synapsin 1 can join small synaptic vesicles to neuronal spectrin, microfilaments and microtubules; it can also bundle microtubules and microfilaments. In this paper, the mode of interaction between synapsin 1 and microtubules has been investigated. Bundling is shown to be highly cooperative: the apparent Hill coefficient is 3.06 +/- 0.3, and bundling is half-maximal at 0.63 +/- 0.02 microM. Bundling occurs either when whole synapsin 1 preparations (containing monomers and oligomers) or when monomeric synapsin 1 is added to microtubules. However, it is not clear that synapsin 1 remains monomeric in the presence of microtubules. Synapsin 1-microtubule mixtures contain two types of filament. One type is characterised by microtubules often with synapsin 1 bound to their surface. The other type is composed of filaments of diameter 15 +/- 5 nm. This filament type is granular and made up in part of 14-nm-diameter particles. These dimensions are consistent with their being made up of polymerised synapsin 1. It is possible that microtubules induce the polymerisation of synapsin 1. Synapsin 1 had independent tubulin binding sites in the N-terminal head domain and in the C-terminal tail domain. Whole synapsin 1 can interact with tubulin after it has been digested to remove the tubulin C terminus (des-C-terminal tubulin). The interaction of des-C-terminal tubulin with synapsin 1 appears to be via the head domain, since 125I-des-C-terminal tubulin only shows specific binding to the head domain on gel blots. By contrast intact tubulin binds to both head and tail domains. Binding to the tail domain can be inhibited by a synthetic peptide representing the microtubule-associated protein 2 (MAP2) binding site of class II beta tubulin. These results suggest a model for microtubule bundling by synapsin 1 in which independent sites in the head and tail domains of synapsin 1 cross-link microtubules by interactions with two distinct sites in tubulin.

Studies of crystallization conditions for native and subtilisin-cleaved pig brain tubulin

A survey of crystallization conditions for pig brain tubulin, using standard vapor diffusion techniques in sitting drops or capillaries, has resulted in irregular, fragile needles or plates with a largest dimension of 0.5 mm. These occurred in 2.5% PEG (MW 3350), 0.1 M Pipes, pH 6.2 and 6.4, 2-16 mM MgSO4, 10-15 mM DTE, and 0.1 mM GDP at 8 degrees C. When GTP replaced GDP these aggregates did not form under any of the conditions surveyed (temperature: 8-10 degrees C; MgSO4: 2-16 mM; pH 6-7; PEG, MW 3350: 1.25-12.5%). EM observations demonstrated that sheets of rings appear in crystal solutions in the presence of GDP or GTP. These results are consistent with the results of Howard and Timasheff (1986, Biochemistry 25, 8292-8300) that tubulin rings form in the presence of GDP or GTP but more readily in GDP. Tubulin crystallization experiments are hampered by tubulin's high degree of heterogeneity. Much of the variability lies in the carboxyl terminal region. Conditions for limited digestion of the heterodimer by subtilisin, removing only the carboxyl terminus, were determined. Reduction of heterogeneity was demonstrated by isoelectric focusing. The solubilities of native and subtilisin-cleaved tubulin in MgSO4, (NH4)2SO4, PEG (MW 1450, 3350, 10,000), DMSO, and MPD were compared. Subtilisin-cleaved tubulin precipitated more readily than native tubulin under all conditions surveyed, consistent with the removal of the highly acidic carboxyl terminus. Vapor diffusion experiments using subtilisin-cleaved tubulin under conditions where native tubulin forms needles or plates resulted in similar aggregates.

Removal of the carboxy terminus of beta-tubulin subunit produces lateral annealing of microtubules with different orientations

1. Tubulin, lacking the carboxy terminus region of its beta subunit assembles into composite microtubule structures showing opposite polarity. 2. Since in these polymers, microtubules are laterally bound, this type of interaction could lead to the generation of microtubules with different polarities, as those found in some cellular types.

Structural diversity and dynamics of microtubules and polymorphic tubulin assemblies

Tubulin, the main protein of microtubules (MTs), has the potency of forming a variety of other assembly products in vitro: rings, ring-crystals, C- and S-shaped ribbons, 10 nm fibres, hoops, sheets, heaped sheets, MT doublets, MT triplets, double-wall MTs, microtubules, curled ribbons, and paracrystals. The supramolecular subunits of all of them are the protofilaments which might be arranged either parallel to the axis (e.g., in MTs, ribbons) or curved (e.g., in hoops, microtubules). There is strong evidence that in the second case the protofilaments have an inside-out orientation compared to MTs. All assembly products mentioned are described structurally and their relevance to the in vivo situation is considered. Moreover, MTs and the other assemblies undergo permanent changes. These dynamics occurring in both individual assemblies and assembly populations are discussed from the structural point of view.