Voltammetric studies of the reactions of iron-sulphur clusters ([3Fe-4S] or [M3Fe-4S]) formed in Pyrococcus furiosus ferredoxin

Reversible Electron Transfer and Substrate Binding Support [NiFe3S4] Ferredoxin as a Protein-Based Model for [NiFe] Carbon Monoxide Dehydrogenase

The nickel-iron carbon monoxide dehydrogenase (CODH) enzyme catalyzes the reversible and selective interconversion of carbon dioxide (CO₂) to carbon monoxide (CO) with high rates and negligible overpotential. Despite decades of research, many questions remain about this complex metalloenzyme system. A simplified model enzyme could provide substantial insight into biological carbon cycling. Here, we demonstrate reversible electron transfer and binding of both CO and cyanide, a substrate and an inhibitor of CODH, respectively, in a Pyrococcus furiosus (Pf) ferredoxin (Fd) protein that has been reconstituted with a nickel-iron sulfide cluster ([NiFe₃S₄] Fd). The [NiFe₃S₄] cluster mimics the core of the native CODH active site and thus serves as a protein-based structural model of the CODH subsite. Notably, despite binding cyanide, no CO binding is observed for the physiological [Fe₄S₄] clusters in Pf Fd, providing chemical rationale underlying the evolution of a site-differentiated cluster for substrate conversion in native CODH. The demonstration of a substrate-binding metalloprotein model of CODH sets the stage for high-resolution spectroscopic and mechanistic studies correlating the subsite structure and function, ultimately guiding the design of anthropogenic catalysts that harness the advantages of CODH for effective CO₂ reduction.

Resonance Raman spectroscopy of Fe-S proteins and their redox properties

Resonance Raman spectra of Fe-S proteins are sensitive to the cluster type, structure and symmetry. Furthermore, bands that originate from bridging and terminal Fe-S vibrations in the 2Fe-2S, 3Fe-4S and 4Fe-4S clusters can be sensitively distinguished in the spectra, as well as the type of non-cysteinyl coordinating ligands, if present. For these reasons, resonance Raman spectroscopy has been playing an exceptionally active role in the studies of Fe-S proteins of diverse structures and functions. We provide here a concise overview of the structural information that can be obtained from resonance Raman spectroscopy on Fe-S clusters, and in parallel, refer to their thermodynamic properties (e.g., reduction potential), which together define the physiological roles of Fe-S proteins. We demonstrate how the knowledge gained over the past several decades on simple clusters nowadays enables studies of complex structures that include Fe-S clusters coupled to other centers and transient processes that involve cluster inter-conversion, biogenesis, disassembly and catalysis.

Heterometallic [AgFe(3)S (4)] ferredoxin variants: synthesis, characterization, and the first crystal structure of an engineered heterometallic iron-sulfur protein

Heterometallic [AgFe(3)S(4)] iron-sulfur clusters assembled in wild-type Pyrococcus furiosus ferredoxin and two variants, D14C and D14H, are characterized. The crystal structure of the [AgFe(3)S(4)] D14C variant shows that the silver(I) ion is indeed part of the cluster and is coordinated to the thiolate group of residue 14. Cyclic voltammetry shows one redox pair with a reduction potential of +220 mV versus the standard hydrogen electrode which is assigned to the [AgFe(3)S(4)](2+/+) couple. The oxidized form of the [AgFe(3)S(4)] D14C variant is stable in the presence of dioxygen, whereas the oxidized forms of the [AgFe(3)S(4)] wild type and D14H variants convert to the [Fe(3)S(4)] ferredoxin form. The monovalent d (10) silver(I) ion stabilizes the [Fe(3)S(4)](+/0) cluster fragment, as opposed to divalent d (10) metal ions, resulting in more than 0.4 V difference in reduction potentials between the silver(I) and, e.g., zinc(II) heterometallic [MFe(3)S(4)] ferredoxins. The trend in reduction potentials for the variants containing the [AgFe(3)S(4)] cluster is wild type ≤ D14C < D14H and shows the same trend as reported for the variants containing the [Fe(3)S(4)] cluster, but is different from the D14C < D14H < wild type trend reported for the [Fe(4)S(4)] ferredoxin. The similarity in the reduction potential trend for the variants containing the heterometallic [AgFe(3)S(4)] cluster and the [Fe(3)S(4)] cluster can be rationalized in terms of the electrostatic influence of the residue 14 side chains, rather than the dissociation constant of this residue, as is the case for [Fe(4)S(4)] ferredoxins. The trends in reduction potentials are in line with there being no electronic coupling between the silver(I) ion and the Fe(3)S(4) fragment.

Characterization of DitA3, the [Fe3S4] ferredoxin of an aromatic ring-hydroxylating dioxygenase from a diterpenoid-degrading microorganism

DitA3, a small soluble ferredoxin, is a component of a ring-hydroxylating dioxygenase involved in the microbial degradation of the diterpenoid, dehydroabietic acid. The anaerobic purification of a heterologously expressed his-tagged DitA3 yielded 20 mg of apparently homogeneous recombinant protein, rcDitA3, per liter of cell culture. Each mole of purified rcDitA3 contained 2.9 equivalents of iron and 4.2 equivalents of sulfur, indicating the presence of a single [Fe(3)S(4)] cluster. This conclusion was corroborated by UV-Visible absorption (epsilon(412)=13.4 mM(-1) cm(-1)) and EPR (g(x,y)=2.00 and g(z)=2.02) spectroscopies. The reduction potential of rcDitA3, determined using a highly oriented parallel graphite (HOPG) electrode, was -177.0+/-0.5 mV vs. the standard hydrogen electrode (SHE) (20 mM MOPS, 80 mM KCl, pH 7.0, 22 degrees C). This potential is similar to those of small, soluble Rieske-type ferredoxin components of aromatic-ring dihydroxylating dioxygenases. In contrast to these Rieske-type ferredoxins, DitA3 appears to exist as a dimer in solution. The dimeric ferredoxin may be more stable or may increase the catalytic efficiency of the dioxygenase by delivering the two reducing equivalents required for turnover of the oxygenase.

Pyrococcus furiosus 4Fe-ferredoxin, chemisorbed on gold, exhibits gated reduction and ionic strength dependent dimerization

Pyrococcus furiosus ferredoxin is a small metalloprotein that shuttles electrons between redox enzymes. In its native 4Fe-4S form the protein is highly thermostable. In addition to three cluster-ligating cysteines, two surface cysteine residues (C21 and C48) are present. We used the reactivity of these surface thiols to directly immobilize ferredoxin on a bare gold electrode, with an orientation in which the cluster is exposed to solution. Voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) studies established the immobilization of the 4Fe form. Native and recombinant wild-type ferredoxins were compared with the C48S, C21S, and C21S/C48S mutants. The variants with one and two surface cysteines can be directly chemisorbed on bare gold. Cyclic voltammetry demonstrated that the reduction potentials are similar to those in solution. The interfacial electron transfer kinetics revealed that the reduction is gated by the interconversion between two oxidized species. AFM images showed that dimers are chemisorbed at low ionic strength, while monomers are present at high ionic strength. XPS spectra revealed the presence of S, Fe, C, N, and O at the surface, which are assigned to the corresponding atoms in the peptide and the cofactor. Analysis of the sulfur spectrum corroborates that both C21 and C48 form gold-thiolate bonds. Moreover, two inorganic sulfide and two iron species were identified, suggesting an inhomogeneous charge distribution in the 4Fe-4S cluster. In conclusion, P. furiosus ferredoxin can be directly and vectorially chemisorbed on gold with retention of its properties. This may provide a biocompatible electrode surface with docking sites for redox enzymes.

Investigating metalloenzyme reactions using electrochemical sweeps and steps: fine control and measurements with reactants ranging from ions to gases

Protein film voltammetry is a powerful method for probing the chemistry of redox-active sites in metalloproteins. The technique affords precise potential control over a tiny quantity of material that is manipulated on an electrode surface, providing information on ligand- or metal-exchange reactions coupled to electron transfer. This is illustrated by examples of transformations of the iron-sulfur clusters in ferredoxins. Protein film voltammetry is particularly advantageous in studies of metalloenzymes for which the current response is proportional to catalytic activity: kinetic data of extremely high signal/noise ratio are obtained for highly active enzymes. We present a series of interesting examples in which catalytic activity varies in unusual ways with applied potential, surveying information that can be obtained from cyclic voltammetry and then looking beyond this method to controlled potential-step experiments that yield kinetic and mechanistic details. Recent results on the voltammetry of the highly active [NiFe]-hydrogenase from Allochromatium vinosum illustrate how it is possible to use the precise kinetic information from potential-step experiments to diagnose subtle details of transformations between catalytically active and inactive states of an enzyme. Protein film voltammetry thus complements spectroscopic techniques and other physical methods, revealing the chemistry of systems that might appear intractable or convoluted by other means.

Influence of electrochemical properties in determining the sensitivity of [4Fe-4S] clusters in proteins to oxidative damage

Interconversion between [4Fe-4S] cubane and [3Fe-4S] cuboidal states represents one of the simplest structural changes an iron-sulphur cluster can undertake. This reaction is implicated in oxidative damage and in modulation of the activity and regulation of certain enzymes, and it is therefore important to understand the factors governing cluster stability and the processes that activate cluster conversion. In the present study, protein film voltammetry has been used to induce and monitor the oxidative conversion of [4Fe-4S] into [3Fe-4S] clusters in different variants of Azotobacter vinelandii ferredoxin I (AvFdI; the 8Fe form of the native protein), and DeltaThr(14)/DeltaAsp(15), Thr(14)-->Cys (T14C) and C42D mutants. The electrochemical results have been correlated with the differing oxygen sensitivities of [4Fe-4S] clusters, and comparisons have been drawn with other ferredoxins (Desulfovibrio africanus FdIII, Clostridium pasteurianum Fd, Thauera aromatica Fd and Pyrococcus furiosus Fd). In contrast with high-potential iron-sulphur proteins (HiPIPs) for which the oxidized species [4Fe-4S](3+) is inert to degradation and can be isolated, the hypervalent state in these ferredoxins (most obviously the 3+ level) is very labile, and the reduction potential at which this is formed is a key factor in determining the cluster's resistance to oxidative damage.

Structure of C42D Azotobacter vinelandii FdI. A Cys-X-X-Asp-X-X-Cys motif ligates an air-stable [4Fe-4S]2+/+ cluster

All naturally occurring ferredoxins that have Cys-X-X-Asp-X-X-Cys motifs contain [4Fe-4S](2+/+) clusters that can be easily and reversibly converted to [3Fe-4S](+/0) clusters. In contrast, ferredoxins with unmodified Cys-X-X-Cys-X-X-Cys motifs assemble [4Fe-4S](2+/+) clusters that cannot be easily interconverted with [3Fe-4S](+/0) clusters. In this study we changed the central cysteine of the Cys(39)-X-X-Cys(42)-X-X-Cys(45) of Azotobacter vinelandii FdI, which coordinates its [4Fe-4S](2+/+) cluster, into an aspartate. UV-visible, EPR, and CD spectroscopies, metal analysis, and x-ray crystallography show that, like native FdI, aerobically purified C42D FdI is a seven-iron protein retaining its [4Fe-4S](2+/+) cluster with monodentate aspartate ligation to one iron. Unlike known clusters of this type the reduced [4Fe-4S](+) cluster of C42D FdI exhibits only an S = 1/2 EPR with no higher spin signals detected. The cluster shows only a minor change in reduction potential relative to the native protein. All attempts to convert the cluster to a 3Fe cluster using conventional methods of oxygen or ferricyanide oxidation or thiol exchange were not successful. The cluster conversion was ultimately accomplished using a new electrochemical method. Hydrophobic and electrostatic interaction and the lack of Gly residues adjacent to the Asp ligand explain the remarkable stability of this cluster.

Thermodynamic influences on the fidelity of iron-sulphur cluster formation in proteins

In an organism, two thermodynamic factors are important in ensuring that homometallic [4Fe-4S] cubane clusters are formed in preference to clusters containing heterometals such as Zn or Cu. These are the electronic resonance stabilisation, which boosts the binding of Fe(II) within an Fe-S cluster relative to its normally low position in the Irving-Williams order, and attenuation of the cytoplasmic concentrations of competing metals such as Zn or Cu by specific ligands.