Preparing a novel magnesium-doped hyaluronan/polyethyleneimine nanoparticle to improve endothelial functionalisation

Surface modification of biodegradable magnesium alloy with poly (L-lactic acid) and sulfonated hyaluronic acid nanoparticles for cardiovascular application

Magnesium (Mg) and its alloys have attracted extensive attention of researchers in the field of cardiovascular implants due to their good mechanical properties and biosafety. Constructing a multifunctional hybrid coating seems to be an effective strategy to address the insufficient endothelialization and poor corrosion resistance of Mg alloy vascular stents. In this study, a dense layer of magnesium fluoride (MgF₂) was prepared on the surface of Mg alloy aiming at better corrosion resistance; Thereafter, sulfonated hyaluronic acid (S-HA) was made into small sized nanoparticles (NP) which were deposited on the MgF₂ surface by self-assembly method, followed with poly-L-lactic acid (PLLA) coating preparation by one-step pulling method. The blood and cell tests showed that the composite coating had good blood compatibility, pro-endothelial, anti-hyperplasia and anti-inflammatory functions. Compared to current clinical PLLA@ Rapamycin coating, our PLLA/NP@S-HA coating showed better functions of promoting endothelial cells growth. These results strongly furnished a promising and feasible strategy for the surface modification of Mg-based degradable cardiovascular stents.

Inducible Nitric Oxide Synthase Embedded in Alginate/Polyethyleneimine Hydrogel as a New Platform to Explore NO-Driven Modulation of Biological Function

Nitric oxide (NO), a small free radical molecule, turned out to be pervasive in biology and was shown to have a substantial influence on a range of biological activities, including cell growth and apoptosis. This molecule is involved in signaling and affects a number of physiologic functions. In recent decades, several processes related to cancer, such as angiogenesis, programmed cell death, infiltration, cell cycle progression, and metastasis, have been linked with nitric oxide. In addition, other parallel work showed that NO also has the potential to operate as an anti-cancer agent. As a result, it has gained attention in cancer-related therapeutics. The nitric oxide synthase enzyme family (NOS) is required for the biosynthesis of nitric oxide. It is becoming increasingly popular to develop NO-releasing materials as strong tumoricidal therapies that can deliver sustained high concentrations of nitric oxide to tumor sites. In this paper, we developed NO-releasing materials based on sodium alginate hydrogel. In this regard, alginate hydrogel discs were modified by adsorbing layers of polyethyleneimine and iNOS-oxygenase. These NO-releasing hydrogel discs were prepared using the layer-by-layer film building technique. The iNOS-oxygenase is adsorbed on the positively charged polyethyleneimine (PEI) matrix layer, which was formed on a negatively charged sodium alginate hydrogel. We show that nitric oxide is produced by enzymes contained within the hydrogel material when it is exposed to a solution containing all the components necessary for the NOS reaction. The electrostatic chemical adsorption of the layer-by-layer process was confirmed by FTIR measurements as well as scanning electron microscopy. We then tested the biocompatibility of the resulting modified sodium alginate hydrogel discs. We showed that this NOS-PEI-modified hydrogel is overall compatible with cell growth. We characterized the NOS/hydrogel films and examined their functional features in terms of NO release profiles. However, during the first 24 h of activity, these films show an increase in NO release flux, followed by a gradual drop and then a period of stable NO release. These findings show the inherent potential of using this system as a platform for NO-driven modulation of biological functions, including carcinogenesis.

Response of cardiovascular environment to sulfonated hyaluronic acid with higher sulfur content

Sulfonated hyaluronic acid (S-HA) has been shown to promote endothelialization in the treatment of cardiovascular diseases according to amounts of investigations. In this study, two kinds of S-HA with higher sulfur content were obtained successfully. Through a series of cell experiments, it was found that the S-HA with higher sulfur content not only possessed stronger ability of promoting the growth and migration of endothelial cells, regulating the phenotype of smooth muscle cells, but also had stronger anti-inflammatory function. Furthermore, all the S-HA molecules are very compatible with blood.

Adventitial injection of HA/SA hydrogel loaded with PLGA rapamycin nanoparticle inhibits neointimal hyperplasia in a rat aortic wire injury model

Neointimal hyperplasia is a persistent complication after vascular interventions, and it is also the leading cause of vascular graft restenosis and failure after arterial interventions, so novel treatment methods are needed to treat this complication. We hypothesized that adventitial injection of HA/SA hydrogel loaded with PLGA rapamycin nanoparticle (hydrogel-PLGA-rapamycin) could inhibit neointimal hyperplasia in a rat aortic wire injury model. The HA/SA hydrogel was fabricated by the interaction of hyaluronic acid (HA), sodium alginate (SA), and CaCO₃; and loaded with PLGA rapamycin nanoparticle or rhodamine uniformly. A SD rat aortic wire injury induced neointimal hyperplasia model was developed, the control group only received wire injury, the adventitial application group received 10 μL hydrogel-PLGA-rapamycin after wire injury, and the adventitial injection group received 10 μL hydrogel-PLGA-rapamycin injected into the aortic adventitia after wire injury. Tissues were harvested at day 21 and analyzed by histology and immunohistochemical staining. Hydrogel loaded with rhodamine can be successfully injected into the aortic adventitia and was encapsuled by the adventitia. The hydrogel could be seen beneath the adventitia after adventitial injection but was almost degraded at day 21. There was a significantly thinner neointima in the adventitial application group and adventitial injection group compared to the control group (p = 0.0009). There were also significantly fewer CD68⁺ (macrophages) cells (p = 0.0012), CD3⁺ (lymphocytes) cells (p = 0.0011), p-mTOR⁺ cells (p = 0.0019), PCNA⁺ cells (p = 0.0028) in the adventitial application and adventitial injection groups compared to the control group. The endothelial cells expressed arterial identity markers (Ephrin-B2 and dll-4) in all these three groups. Adventitial injection of hydrogel-PLGA-rapamycin can effectively inhibit neointimal hyperplasia after rat aortic wire injury. This may be a promising drug delivery method and therapeutic choice to inhibit neointimal hyperplasia after vascular interventions.

Extracellular Matrix Coatings on Cardiovascular Materials—A Review

Vascular transplantation is an effective and common treatment for cardiovascular disease (CVD). However, the low biocompatibility of implants is a major problem that hinders its clinical application. Surface modification of implants with extracellular matrix (ECM) coatings is an effective approach to improve the biocompatibility of cardiovascular materials. The complete ECM seems to have better biocompatibility, which may give cardiovascular biomaterials a more functional surface. The use of one or several ECM proteins to construct a surface allows customization of coating composition and structure, possibly resulting in some unique functions. ECM is a complex three-dimensional structure composed of a variety of functional biological macromolecules, and changes in the composition will directly affect the function of the coating. Therefore, understanding the chemical composition of the ECM and its interaction with cells is beneficial to provide new approaches for coating surface modification. This article reviews novel ECM coatings, including coatings composed of intact ECM and biomimetic coatings tailored from several ECM proteins, and introduces new advances in coating fabrication. These ECM coatings are effective in improving the biocompatibility of vascular grafts.

Advances in Hyaluronic Acid for Biomedical Applications

Hyaluronic acid (HA) is a large non-sulfated glycosaminoglycan that is the main component of the extracellular matrix (ECM). Because of its strong and diversified functions applied in broad fields, HA has been widely studied and reported previously. The molecular properties of HA and its derivatives, including a wide range of molecular weights but distinct effects on cells, moisture retention and anti-aging, and CD44 targeting, promised its role as a popular participant in tissue engineering, wound healing, cancer treatment, ophthalmology, and cosmetics. In recent years, HA and its derivatives have played an increasingly important role in the aforementioned biomedical fields in the formulation of coatings, nanoparticles, and hydrogels. This article highlights recent efforts in converting HA to smart formulation, such as multifunctional coatings, targeted nanoparticles, or injectable hydrogels, which are used in advanced biomedical application.

Hyaluronic acid/polyethyleneimine nanoparticles loaded with copper ion and disulfiram for esophageal cancer

In the clinical treatment of cancer, improving the effectiveness and targeting of drugs has always been a bottleneck problem that needs to be solved. In this contribution, inspired by the targeted inhibition on cancer from combination application of disulfiram and divalent copper ion (Cu²⁺), we optimized the concentration of disulfiram and Cu²⁺ ion for inhibiting esophageal cancer cells, and loaded them in hyaluronic acid (HA)/polyethyleneimine (PEI) nanoparticles with specific scales, in order to improve the effectiveness and targeting of drugs. The in vitro cell experiments demonstrated that more drug loaded HA/PEI nanoparticles accumulated to the esophageal squamous cell carcinoma (Eca109) and promoted higher apoptosis ratio of Eca109. Both in vitro and in vivo biological assessment verified that the disulfiram/Cu²⁺ loaded HA/PEI nanoparticles promoted the apoptosis of cancer cells and inhibited the tumor proliferation, but had no toxicity on other normal organs.

The potential impact of polyethylenimine on biological behavior of 3D-printed alginate scaffolds

Three-dimensional (3D) printing using biocompatible materials is a novel technology having a great potential for fabricating precise 3D scaffolds for tissue engineering. Alginate hydrogel undergoes unstable swelling and degradation properties as well as suffers from poor cell adhesion due to the lack of cell binding domains. These limit its applications in tissue engineering. In this study, 3D-printed alginate scaffolds were coated by branch polyethylenimine (PEI) to overcome the limitation of alginate because the branch PEI is a cationic polymer with a large number of active N-H groups. The results indicated that surface modification of 3D-printed alginate scaffolds using an appropriate concentration of PEI potentially promoted the fibroblast cells functions in 3D-printed alginate scaffolds, increased cell adhesion, cell proliferation and cell spreading through providing a large amount of N-H groups and increasing hydrophilicity of the surface. The degradation rate of alginate was degraded by interaction between N-H groups in PEI and -COO- groups in alginate structure and followed by the formation strong barrier layer in the interface of alginate and PEI. Therefore, ALG-PEI scaffolds can be a good candidate for tissue engineering and wound dressing applications.