Effect of bovine and buffalo ghee fractionation on triacylglycerol profile, lipid nutritional quality indices, thermal behavior, and tocopherol content: A comparative analysis with 2 categories of infant formula fat

The increased use of dairy fat in various applications is facilitated by its fractionation into hard and liquid fractions. Herein, the fractionation of bovine ghee and buffalo ghee was investigated, and triacylglycerol (TAG) profiles of milk fat fractions and 2 categories of infant formula fat were quantified by using ultraperformance convergence chromatography quadrupole time-of-flight MS (UPC2-Q-TOF-MS) using carbon dioxide as the mobile phase. Furthermore, the thermal behavior of the different samples was evaluated, and tocopherol content was also quantified. A total of 176, 188, and 84 TAG species were identified in bovine ghee fractions, buffalo ghee fractions, and infant formula fat, respectively. The results showed significant differences in TAG profile, lipid quality indices, and tocopherol content between the different fat types. Stearin fractions had higher levels of saturated TAG, whereas olein fractions had significantly lower levels. These results could provide interesting insights into the field of human milk fat substitutes.

Observation of a temperature dependent anomaly in the UV translucency of milk useful for UV-C preservation techniques

Milk fat globules and casein micelles are the dispersed particles of milk that are responsible for its typical white turbid appearance and usually make it difficult to treat with modern ultraviolet light (UV) preservation techniques. The translucency of milk depends largely on the refractive indices of the dispersed particles, which are directly affected by temperature changes, as incorporated triglycerides can crystallize, melt or transition into other polymorphs. These structural changes have a significant effect on the scattering properties and thus on the UV light propagation in milk, especially by milk fat globules. In this study, a temporary minimum in the optical density of milk was observed within UV wavelength at 14 °C when heating the milk from 6 to 40 °C. This anomaly is consistent with structural changes detected by a distinct endothermic peak at 14 °C using differential scanning calorimetry. Apparently, the optical density anomaly between 10 and 20 °C disappears when the polymorphic transition already has proceeded through previous isothermal equilibration. Thus, melting of equilibrated triglycerides may not affect the RI of milk fat globules at ca. 14 °C as much as melt-mediated polymorphic transitioning. An increased efficiency of UV-C preservation (254 nm) at the translucency optimum was demonstrated by temperature-dependent microbial inactivation experiments.

Multiscale Structural Insight into Dairy Products and Plant-Based Alternatives by Scattering and Imaging Techniques

Dairy products and plant-based alternatives have a large range of structural features from atomic to macroscopic length scales. Scattering techniques with neutrons and X-rays provide a unique view into this fascinating world of interfaces and networks provided by, e.g., proteins and lipids. Combining these scattering techniques with a microscopic view into the emulsion and gel systems with environmental scanning electron microscopy (ESEM) assists in a thorough understanding of such systems. Different dairy products, such as milk, or plant-based alternatives, such as milk-imitating drinks, and their derived or even fermented products, including cheese and yogurt, are characterized in terms of their structure on nanometer- to micrometer-length scales. For dairy products, the identified structural features are milk fat globules, casein micelles, CCP nanoclusters, and milk fat crystals. With increasing dry matter content in dairy products, milk fat crystals are identified, whereas casein micelles are non-detectable due to the protein gel network in all types of cheese. For the more inhomogeneous plant-based alternatives, fat crystals, starch structures, and potentially protein structures are identified. These results may function as a base for improving the understanding of dairy products and plant-based alternatives, and may lead to enhanced plant-based alternatives in terms of structure and, thus, sensory aspects such as mouthfeel and texture.

Tempering governs the milk fat crystallisation and viscoelastic behaviour of unprocessed and homogenised creams

The crystallisation behaviour of milk fat plays an important role in the functionality and sensory properties of fat-rich dairy products. In this study, we investigated the impact of tempering to 25 °C on the viscoelastic properties, particle size and thermal behaviour of 20% w/w unprocessed and homogenised creams prepared from bovine milk. The crystallisation properties were examined by synchrotron X-ray diffraction (XRD) at small (SAXS) and wide angle (WAXS) and differential scanning calorimetry (DSC). Oscillation rheology was performed to characterise the cream's viscoelastic properties. Homogenisation (35 MPa) reduced the average droplet size from 4.4 to 1.3 µm. After 24 h storage at 4 °C, milk fat structures showed triacylglycerol (TAG) 2L and 3L_{(001, 002, 003, 005)} lamellar stacking orders associated predominantly with the α and β' polymorphic forms. Tempering to 25 °C induced the complete melting of the 3L crystals and led to an irreversible loss in the elastic modulus (G') and a reduction in the viscous modulus (G'') once returned to refrigerated conditions, due to changes in the particle-particle interactions and structure of the reformed milk fat crystals. The results demonstrate that crystallisation behaviour of milk fat is influenced by droplet size and the rearrangement of triacylglycerol (TAG) upon tempering, and lead to changes in the viscoelastic behaviour of dairy products containing a high level of milk fat.

Milk fat: opportunities, challenges and innovation

Milk fat is a high-value milk component that is processed mainly as butter, cheese, cream and whole milk powder. It is projected that approximately 35 million tonnes of milk fat will be produced globally by 2025. This surplus, enhances the need for diversification of milk fat products and the milk pool in general. Infant milk formula producers, for instance, have incorporated enzyme modified ("humanised") milk fat and fat globule phospholipids to better mimic human milk fat structures. Minor components like mono- and di-glycerides from milk fat are increasingly utilized as emulsifiers, replacing palm esters in premium-priced food products. This review examines the chemistry of milk fat and the technologies employed for its modification, fractionation and enrichment. Emerging processing technologies such as ultrasound, high pressure processing, supercritical fluid extraction and fractionation, can be employed to improve the nutritional and functional attributes of milk fat. The potential of recent developments in biological intervention, through dietary manipulation of milk fatty acid profiles in cattle also offers significant promise. Finally, this review provides evidence to help redress the imbalance in reported associations between milk fat consumption and human health, and elucidates the health benefits associated with consumption of milk fat and dairy products.

Crystallization of Femtoliter Surface Droplet Arrays Revealed by Synchrotron Small-Angle X-ray Scattering

The crystallization of oil droplets is critical in the processing and storage of lipid-based food and pharmaceutical products. Arrays of femtoliter droplets on a surface offer a unique opportunity to study surfactant-free colloidlike systems. In this work, the crystal growth process in these confined droplets was followed by cooling a model lipid (trimyristin) from a liquid state utilizing synchrotron small-angle X-ray scattering (SAXS). The measurements by SAXS demonstrated a reduced crystallization rate and a greater degree of supercooling required to trigger lipid crystallization in droplets compared to those of bulk lipids. These results suggest that surface droplets crystallize in a stochastic manner. Interestingly, the crystallization rate is slower for larger femtoliter droplets, which may be explained by the onset of crystallization from the three-phase contact line. The larger surface nanodroplets exhibit a smaller ratio of droplet volume to the length of three-phase contact line and hence a slower crystallization rate.

Effect of Phytosterols on the Crystallization Behavior of Oil-in-Water Milk Fat Emulsions

Milk has been used commercially as a carrier for phytosterols, but there is limited knowledge on the effect of added plant sterols on the properties of the system. In this study, phytosterols dispersed in milk fat at a level of 0.3 or 0.6% were homogenized with an aqueous dispersion of whey protein isolate (WPI). The particle size, morphology, ζ-potential, and stability of the emulsions were investigated. Emulsion crystallization properties were examined through the use of differential scanning calorimetry (DSC) and Synchrotron X-ray scattering at both small and wide angles. Phytosterol enrichment influenced the particle size and physical appearance of the emulsion droplets, but did not affect the stability or charge of the dispersed particles. DSC data demonstrated that, at the higher level of phytosterol addition, crystallization of milk fat was delayed, whereas, at the lower level, phytosterol enrichment induced nucleation and emulsion crystallization. These differences were attributed to the formation of separate phytosterol crystals within the emulsions at the high phytosterol concentration, as characterized by Synchrotron X-ray measurements. X-ray scattering patterns demonstrated the ability of the phytosterol to integrate within the milk fat triacylglycerol matrix, with a concomitant increase in longitudinal packing and system disorder. Understanding the consequences of adding phytosterols, on the physical and crystalline behavior of emulsions may enable the functional food industry to design more physically and chemically stable products.

Australian milk fat--Seasonal and regional variation of melting properties

The solid fat content and dropping point of milk fat obtained over 2 yr and from 19 bulk milk production sites across Australia were characterized. Solid fat content at 5 °C and 20 °C, respectively, ranged between 49.9 and 66.1% and between 14.6 and 29.6% across all sites. Dropping point ranged between 30.5 and 35.4 °C. The dropping point did not correlate with solid fat content at lower temperatures across several sites, indicating that it is not an accurate or useful measure of functionality at temperatures of 15 °C or below. Although at times, considerable variation was observed in milk fat melting properties between sites located in similar geographic regions, statistical analysis by means of boxplots and multidimensional scaling revealed broad similarities within regions over the 24 mo. Multidimensional scaling also revealed similarities between some quite distant and diverse regions (e.g., Queensland and South Australia with constant and seasonal production, respectively). These analyses were used to make 5 groups from the 19 sites to describe seasonal melting properties. The groups with sites in west Victoria, southeast Victoria, and Tasmania showed the largest seasonal variation and range of values, with peaks and lows in southeast Victoria and Tasmania occurring up to 3 mo later than in west Victoria. The group with sites in New South Wales, Queensland, and South Australia had the least variation and range of values, which were relatively high throughout. The group with Western Australian sites showed medium levels of variation but distinct seasonal patterns, with solids fats typically below and dropping points higher than the national average. The Victorian group's lows in dropping point occurred about 2 mo later than did the low values of solid fat content. No single factor stood out as determining the variation in melting properties.

The effect of butter grains on physical properties of butter-like emulsions

Milk fat exists as globules in its natural state in milk. The potential of using globular fat to modulate the rheological properties and crystallization behavior in butter-like emulsions was studied in the present work. We conducted a comparative study of butter-like emulsions, with a fat phase consisting of 0, 10, 25, 50, or 100% anhydrous milk fat (AMF), the remaining fat being butter grains, and all samples containing 20% water, to obtain systematic variation in the ratio of globular fat. All emulsions were studied over 4wk of storage at 5°C. By combining small and large deformation rheology, we conducted a detailed characterization of the rheological behavior of butter-like emulsions. We applied differential scanning calorimetry to monitor thermal behavior, confocal laser scanning microscopy for microstructural analysis, and low-field pulsed nuclear magnetic resonance spectrometry to measure solid fat content. By combining these techniques, we determined that increasing the fraction of globular fat (by mixing with butter grains) decreases the hardness of butter-like emulsions up to an order of magnitude at d 1. However, no difference was observed in thermal behavior as a function of butter grain content, as all emulsions containing butter grains revealed 2 endothermal peaks corresponding to the high (32.7°C ± 0.6) and medium (14.6°C ± 0.1) melting fractions of fatty acids. In terms of microstructure, decreasing the amount of butter grains in the emulsions resulted in formation of a denser fat crystal network, corresponding to increased hardness. Moreover, microstructural analysis revealed that the presence of butter grains resulted in faster formation of a continuous fat crystal network compared with the 100% AMF sample, which was dominated by crystal clusters surrounded by liquid oil. During storage, hardness remained stable and no changes in thermal behavior were observed, despite an increase in solid fat content of up to 5%. After 28d of storage, we observed no difference in either microstructural or rheological properties, indicating that formation of primary bonds occurs primarily within the first day of storage. The rheological behavior of butter-like emulsions is not determined solely by hardness, but also by stiffness related to secondary bonds within the fat crystal network. The complex rheological behavior of milk fat-based emulsions is better characterized using multiple parameters.

Multiscale structures of lipids in foods as parameters affecting fatty acid bioavailability and lipid metabolism

On a nutritional standpoint, lipids are now being studied beyond their energy content and fatty acid (FA) profiles. Dietary FA are building blocks of a huge diversity of more complex molecules such as triacylglycerols (TAG) and phospholipids (PL), themselves organised in supramolecular structures presenting different thermal behaviours. They are generally embedded in complex food matrixes. Recent reports have revealed that molecular and supramolecular structures of lipids and their liquid or solid state at the body temperature influence both the digestibility and metabolism of dietary FA. The aim of the present review is to highlight recent knowledge on the impact on FA digestion, absorption and metabolism of: (i) the intramolecular structure of TAG; (ii) the nature of the lipid molecules carrying FA; (iii) the supramolecular organization and physical state of lipids in native and formulated food products and (iv) the food matrix. Further work should be accomplished now to obtain a more reliable body of evidence and integrate these data in future dietary recommendations. Additionally, innovative lipid formulations in which the health beneficial effects of either native or recomposed structures of lipids will be taken into account can be foreseen.

Crystallization properties and polymorphism of triacylglycerols in goat's milk fat globules

The sensorial, functional, and nutritional properties of goat dairy products result from the specific fatty acid composition of goat's milk fat. However, information on the physical and thermal properties of goat's milk fat is scarce. In this study, crystallization of triacylglycerols (TG) in goat's milk fat globules was investigated using polarized light microscopy and the coupling of time-resolved synchrotron radiation X-ray diffraction (XRD) and high-sensitivity differential scanning calorimetry (DSC). The molecular organization of the solid fat phase was characterized for cooling rates between 3 and 0.1 degrees C/min. Quenching of goat's milk fat globules from 50 to -8 degrees C and 4 degrees C was also examined to identify the most unstable polymorphic forms of TG. Then, the melting behavior of fat crystals was studied on subsequent heating at 1 degrees C/min. Triple chain length (3L: 68.6-70 A) and double chain length (2L: 37-45.4 A) structures were characterized and 5 polymorphic forms, alpha, sub-alpha, beta' 1, beta' 2, and beta were identified. Polymorphic transitions were observed within goat's milk fat globules as a function of time after quenching and as a function of temperature on heating. From a technological point of view, this work will contribute to a better understanding of the rheological properties as well as on the flavor evolutions of goat's milk-based products.