Manometer extension for high pressure measurement: nuclear quadrupole resonance study of Cu2O with a modified Bridgman anvil cell up to 10 GPa

Fabrication and evaluation via nuclear quadrupole resonance of a palm cubic-anvil pressure cell

A "palm" cubic-anvil pressure cell (PCAC) having an outer diameter of 60 mm, the smallest cubic-anvil cell to date, was fabricated to insert in a large-bore superconducting magnet. The pressure cell has a sample space of ϕ 2.5 × 1.5 mm², which is fairly large for a pressure cell that can reach a high pressure above 4 GPa. Pressure homogeneity was monitored from the ⁶³Cu nuclear-quadrupole-resonance linewidth of Cu₂O up to 6.7 GPa. The linewidth first increased with increasing pressure up to 4 GPa and then saturated above 4 GPa. The pressure homogeneity was better than that of a piston-cylinder pressure cell. The PCAC is advantageous because a large sample space and high pressure homogeneity are secured even at high pressures.

Design optimization through thermomechanical finite-element analysis of a hybrid piston-clamped anvil cell for nuclear magnetic resonance experiments

The investigation of materials under extreme pressure conditions requires high-performance cells whose design invariably involves trade-offs between the maximum achievable pressure, the allowed sample volume, and the possibility of real-time pressure monitoring. With a newly conceived hybrid piston-clamped anvil cell, we offer a relatively simple and versatile system, suitable for nuclear magnetic resonance experiments up to 4.4 GPa. Finite-element models, taking into account mechanical and thermal conditions, were used to optimize and validate the design prior to the realization of the device. Cell body and gaskets were made of beryllium-copper alloy and the pistons and pusher were made of tungsten carbide, while the anvils consist of zirconium dioxide. The low-temperature pressure cell performance was tested by monitoring in situ the pressure-dependent ⁶³Cu nuclear-quadrupole-resonance signal of Cu₂O.

Adaptation of the Bridgman anvil cell to liquid pressure mediums

The advantage of Bridgman anvil pressure cells is their wide pressure range and the large number of wires which can be introduced into the pressure chamber. In these pressure cells, soft solid pressure mediums such as steatite are used. We have succeeded in adapting the Bridgman cell to liquid pressure mediums. With this breakthrough, it is now possible to measure in very good hydrostatic pressure conditions up to 7 GPa, which is about twice the pressure attainable in piston-cylinder cells. The pressure gradient in the cell, estimated from the superconducting transition width of lead, is reduced by a factor of 5 in the liquid medium with respect to steatite. By using nonmagnetic materials for the anvils and the clamp and due to the small dimensions of the latter, our device is specially suitable for magnetotransport measurements in dilution fridges. This pressure cell has been developed to measure very fragile and brittle samples such as organic conductors. Resistivity measurements of (TMTTF)(2)BF(4) performed in a solid and a liquid pressure medium demonstrate the necessity of hydrostatic pressure conditions for the study of organic conductors at high pressures.