Structural properties and site specific interactions of Pt with the graphene/Ru(0001) moiré overlayer

Unearthing Atomic Dynamics in Nanocatalysts

Being able to access the rich atomic-scale phenomenology, which occurs during the reactions pathways, is a pressing need toward the pursued knowledge-based design of more efficient nanocatalysts, precisely tailored atom by atom for each reaction. However, to reach this goal of achieving maximum optimization, it is mandatory, first, to address how exposure to the experimental conditions, which will be needed to activate the processes, affects the internal configuration of the nanoparticles at the atomic level. In particular, the most critical experimental parameter is probably the temperature, which among other unwanted effects can induce nanocatalyst aggregation. This work highlights the high potential of experimental techniques such as the scanning probe microscopies, which are able to investigate matter in real space with atomic resolution, to reach the key challenge in heterogeneous catalysis of achieving access to the atomic-scale processes taking place in the nanocatalysts. Specifically, the phenomenology occurring in a nanoparticle system during annealing is studied with atomic precision by scanning tunneling microscopy. As a result, the existence of an internal atomic restructuring, occurring already at relatively low temperatures, within Ir nanoparticles grown over h-BN/Ru(0001) surfaces is demonstrated. Such restructuration, which reduces the undercoordination of the outer Ir atoms, is expected to have a significant effect on the reactivity of the nanoparticles. Going a step further, an internal restructuring of the nanoparticles during their involvement as catalysts has also been also identified.

On-surface chemical dynamics of monolayer, bilayer, and many-layered graphene surfaces probed with supersonic beam scattering and STM imaging

We have developed the capability to elucidate interfacial reaction dynamics using an arguably unique combination of supersonic molecular beams combined with in situ STM visualization. These capabilities have been implemented in order to reveal the complex spatiotemporal correlations that govern the oxidation of graphitic systems spanning atomic-, nano-, and meso-length scales. In this study, the 3 nm periodic moiré pattern of monolayer and bilayer graphene on Ru(0001) provides a diverse palette of potential scattering and binding sites at the interface for ground state atomic oxygen. We resolve the site-specificity of atomic oxygen placement on the moiré lattice for both monolayer and bilayer graphene on Ru(0001) with atomic resolution. Angle- and energy-controlled scattering of O(3P) on these interfaces reveals an incisive side-by-side comparison of preferential reactivity of the monolayer surface compared to a more free-standing bilayer graphene ruthenium interface. Morphologically dependent reactivity of many layered graphene (HOPG) and monolayer graphene on Ru(0001) reveal anisotropic on-surface reactivity dependent on the presence of proximal reacted sites or local regions. The kinetics of on-surface oxidation are additionally shown to influence the morphology of surface products by varying the temperature of the interface and flux of reactant species. Such correlations are important in chemisorption, catalysis, materials oxidation and erosion, and film processing-and tunable moiré templated adsorption is a route to well-ordered self-assembled 2D materials for use in next-generation platforms for quantum devices and catalysis. Taken together, these results highlight a new direction in the examination of interfacial reaction dynamics where incident beam kinetic energy and angle of incidence can be used as reaction control parameters, with outcomes such as site-specific reactivity, changes for overall time-evolving mechanisms, and the relative importance of non-adiabatic channels in adsorption all linked to the on-surface fate of chemisorbed species.

Coverage-Dependent Site-Specific Placement and Correlated Diffusion of Atomic Oxygen on Moiré-Patterned Graphene on Ru(0001)

Nano-periodic arrays of atomic oxygen are visualized on epitaxial graphene on Ru(0001) via STM following supersonic beam exposure to non-equilibrium fluxes of atomic oxygen. Self-organization of atomic oxygen on graphene is directed by the intrinsic moiré pattern of the ruthenium-graphene interface. Atom-resolved STM imaging reveals the richness of multiparticle interactions, leading to correlated atomic diffusion and placement. Pair-distribution functions demonstrate that repulsive oxygen-oxygen interactions play an increasingly important role in the site specificity and diffusivity of atomic oxygen on the moiré lattice with increasing coverage. Atomic visualization shows the number of oxygen atoms in a local region changes overall diffusion rates and promotes the correlated motion of oxygen atoms. Understanding the site specificity of oxygen adsorption and diffusive behavior of atomic oxygen on epitaxial graphene on Ru(0001) provides insight for both the synthesis and stability of moiré-templated two-dimensional materials which show promise as platforms for next-generation quantum materials and catalysts.

Mechanism of Corrugated Graphene Moiré Superstructures on Transition-Metal Surfaces

A graphene layer on a transition-metal (TM) surface can be either corrugated or flat, depending on the type of the substrate and its rotation angle with respect to the substrate. It was broadly observed that the degree of corrugation generally decreases with the increase of rotation angle or the decrease of Moiré pattern size. In contrast to a flat graphene on a TM surface, a corrugated graphene layer has an increased binding energy to the substrate and a concomitant elastic energy. Here, we developed a theoretical model about the competition between the binding energy increase and the elastic energy of corrugated graphene layers on TM surfaces in which all the parameters can be calculated by density functional theory (DFT) calculations. The agreement between the theoretical model and the experimental observations of graphene on various TM surfaces, for example, Ru(0001), Rh(111), Pt(111), and Ir(111), substantiated the applicability of this model for graphene on other TM surfaces. Moreover, the morphology of a graphene layer on an arbitrary TM surface can be theoretically predicted through simple DFT calculations based on the model. Our work thus provides a theoretical framework for the intelligent design of graphene/TM superstructures with the desired structure.

Dissociation of water on atomic oxygen-covered Rh nanoclusters supported on graphene/Ru(0001)

We studied the dissociation of water (H₂O*, with * denoting adspecies) on atomic oxygen (O*)-covered Rh nanoclusters (Rh_O^* ) supported on a graphene film grown on a Ru(0001) surface [G/Ru(0001)] under ultrahigh-vacuum conditions and with varied surface-probe techniques and calculations based on density-functional theory. The graphene had a single rotational domain; its lattice expanded by about 5.7% to match the Ru substrate structurally better. The Rh clusters were grown by depositing Rh vapors onto G/Ru(0001); they had an fcc phase and grew in (111) orientation. Water adsorbed on the Rh clusters was dissociated exclusively in the presence of O*, like that on a Rh(111) single-crystal surface. Contrary to the case on Rh(111)_O^* , excess O* (even at a saturation level) on small Rh_O^* clusters (diameter of 30-34 Å) continued to promote, instead of inhibiting, the dissociation of water; the produced hydroxyl (OH*) increased generally with the concentration of O* on the clusters. The difference results from more reactive O* on the Rh_O^* clusters. O* on Rh_O^* clusters activated the dissociation via both the formation of hydrogen bonds with H₂O* and abstraction of H directly from H₂O*, whereas O* on Rh(111)_O^* assisted the dissociation largely via the formation of hydrogen bonds, which was readily obstructed with an increased O* coverage. As the disproportionation (2 OH* → H₂O* + O*) is endothermic on the Rh_O^* clusters but exothermic on Rh(111)_O^* , OH* produced on Rh_O^* clusters showed a thermal stability superior to that on the Rh(111)_O^* surface-thermally stable up to 400 K.

Interaction of CO with Pt nanoclusters on a graphene-covered Ru(0001) surface

The adsorption of CO on Pt nanoclusters on a single layer of graphene epitaxially grown on the Ru(0001) surface [Gr/Ru(0001)] was studied with reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD). The graphene layer was grown through exposure to ethylene using a method that has previously been shown to completely cover the surface. As CO adsorbs on Ru(0001) but not on graphene, the complete coverage of the Ru(0001) surface by graphene was verified with TPD as no CO adsorption was detectable. Previous work has demonstrated that Pt nanoclusters nucleate in the moiré unit cells of the Gr/Ru(0001) surface. Exposure of the Pt/Gr/Ru(0001) surface to CO gives rise to strong RAIRS peaks at 2065-2085 cm^-1 assigned to CO at Pt atop sites and at 1848 cm^-1 due to CO at Pt bridge sites. The CO TPD peak areas were used to quantify the CO coverage, which allowed for the determination of the RAIRS peak areas per CO molecule. It was found that the RAIRS intensity for CO on Pt/Gr/Ru(0001) is as much as nine times the intensity of CO on Ru(0001) on a per molecule basis. A more modest intensity enhancement was observed compared to CO on Pt islands on the Ru(0001) surface.

Pt nanocluster size effects in the hydrogen evolution reaction: approaching the theoretical maximum activity

Hydrogen production from electrocatalytic water splitting in electrolyzers is a key process to store excess electric energy produced from intermittent renewable energy sources. For proton exchange membrane (PEM) electrolyzers, carbon supported platinum particles exhibit the highest rates for the hydrogen evolution reaction (HER); however, high Pt costs limit the wide spread use of this technology. By employing a graphene layer grown on a Ru(0001) single crystal as a template for Pt nanocluster (NC) growth, we studied the dependence of the HER activity on the NC size using NCs of different sizes. We provide clear quantitative experimental evidence for a volcano-like relationship between the HER activity and the NC size which has been missing so far. For Pt NCs with very low sizes below 2 nm, we found stunningly improved exchange HER current densities. The highest exchange current density was observed for Pt NCs with an average size of ca. 38 atoms. These Pt₃₈ NCs do not only surpass the Pt-mass-specific activity of commercial Pt electrode materials by well above three orders of magnitude, also their exchange current density is located close to the maximum exchange current density for the HER predicted theoretically for transition metal surfaces. The present work provides a strong stimulus for future research towards technically feasible Pt NC catalysts with cluster sizes in the range of few tens of Pt atoms.

The alignment-dependent properties and applications of graphene moiré superstructures on the Ru(0001) surface

The moiré superstructure of graphene on a lattice-mismatched metal substrate has profound effects on the electronic properties of graphene and can be used for many applications. Here, we propose to systematically tune the moiré superstructure of graphene on the Ru(0001) surface by rotating the graphene layer. Our study reveals two kinds of graphene moiré superstructures: (i) the ultra-flat graphene layers with height variations of less than 0.1 Å for rotation angles greater than 20° that have the same structural and electronic properties everywhere, and (ii) the highly corrugated graphene moiré superstructures with height variations from 0.4 to 1.6 Å for rotation angles less than 20°, whose electronic properties are highly modulated by the interaction with the substrate. Moreover, these rotated graphene moiré superstructures can serve as templates to produce matrices of size-tunable metal clusters from a few to ∼100 atoms. This study reveals the causes of the structural fluctuation of moiré superstructures of graphene on the transition metal surface and suggests a pathway to tune graphene's electronic properties for various applications.

Tailoring Intercalant Assemblies at the Graphene-Metal Interface

The influence of graphene on the assembly of intercalated material is studied using low-temperature scanning tunneling microscopy. Intercalation of Pt under monolayer graphene on Pt(111) induces a substrate reconstruction that is qualitatively different from the lattice rearrangement induced by metal deposition on Pt(111) and, specifically, the homoepitaxy of Pt. Alkali metals Cs and Li are used as intercalants for monolayer and bilayer graphene on Ru(0001). Atomically resolved topographic data reveal that at elevated alkali metal coverage (2 × 2)Cs and (1 × 1)Li intercalant structures form with respect to the graphene lattice.

Size-Selective Carbon Clusters as Obstacles to Graphene Growth on a Metal

Chemical vapor deposition (CVD) on metals is so far the best suited method to produce high-quality, large-area graphene. We discovered an unprecedentedly large family of small size-selective carbon clusters that form together with graphene during CVD. Using scanning tunneling microscopy (STM) and density functional theory (DFT), we unambiguously determine their atomic structure. For that purpose, we use grids based on a graphene moiré and a dilute atomic lattice that unambiguously reveal the binding geometry of the clusters. We find that the observed clusters bind in metastable configurations on the substrate, while the thermodynamically stable configurations are not observed. We argue that the clusters are formed under kinetic control and establish that the evolution of the smallest clusters is blocked. They are hence products of surface reactions in competition with graphene growth, rather than intermediary species to the formation of extended graphene, as often assumed in the literature. We expect such obstacles to the synthesis of perfect graphene to be ubiquitous on a variety of metallic surfaces.

A Monolayer of Hexagonal Boron Nitride on Ir(111) as a Template for Cluster Superlattices

The moiré of a monolayer of hexagonal boron nitride on Ir(111) is found to be a template for Ir, C, and Au cluster superlattices. Using scanning tunneling microscopy, the cluster structure and epitaxial relation to the substrate, the cluster binding site, the role of defects, as well as the thermal stability of the cluster lattice are investigated. The Ir and C cluster superlattices display a high thermal stability, before they decay by intercalation and Smoluchowski ripening. Ab initio calculations explain the extraordinarily strong Ir cluster binding through selective sp³ rehybridization of boron nitride involving B-Ir cluster bonds and a strengthening of the nitrogen bonds to the Ir substrate in a specific, initially only chemisorbed valley area within the moiré.

Electronic effects and fundamental physics studied in molecular interfaces

Scanning probe instruments in conjunction with a very low temperature environment have revolutionized the ability of building, functionalizing, and analysing two dimensional interfaces in the last twenty years. In addition, the availability of fast, reliable, and increasingly sophisticated methods to simulate the structure and dynamics of these interfaces allow us to capture even very small effects at the atomic and molecular level. In this review we shall focus largely on metal surfaces and organic molecular compounds and show that building systems from the bottom up and controlling the physical properties of such systems is no longer within the realm of the desirable, but has become day to day reality in our best laboratories.

Preventing sintering of nanoclusters on graphene by radical adsorption

Metal nanoclusters, supported on inert substrates, exhibiting well-defined shapes and sizes in a broad range of temperatures are a major object of desire in nanotechnology. Here, a technique is presented that improves the thermal stability of monodisperse and crystalline transition metal nanoclusters grown in a regular array on metal-supported graphene. To stabilize the clusters after growth under ultrahigh vacuum the system composed of the aggregates and the graphene/metal interface is exposed to radicals resulting from the dissociation of diatomic gases. As a model system we have used Pt as the metal element for cluster growth and the template consisting of the moiré pattern resulting from the lattice mismatch between graphene and the Ir(111) surface. The study has been performed for deuterium and oxygen radicals, which interact very differently with graphene. Our results reveal that after radical exposure the thermally activated motion of Pt nanoclusters to adjacent moiré cells and the subsequent sintering of neighbor aggregates are avoided, most pronounced for the case of atomic O. For the case of D the limits of the improvement are given by radical desorption, whereas for the case of O they are defined by an interplay between coalescence and graphene etching followed by Pt intercalation, which can be controlled by the amount of exposure. Finally, we determined the mechanism of how radical adsorption improves the thermal stability of the aggregates.

Template Effect of the Graphene Moiré Lattice on Phthalocyanine Assembly

Superstructures of metal-free phthalocyanine (2H-Pc) molecules on graphene-covered Ir(111) have been explored by scanning tunnelling microscopy. Depending on the sub-monolayer coverage different molecular assemblies form at the surface. They reflect the transition from a graphene template effect on the 2H-Pc arrangement to molecular superstructures that are mainly governed by the intermolecular coupling.

Universal classification of twisted, strained and sheared graphene moiré superlattices

Moiré superlattices in graphene supported on various substrates have opened a new avenue to engineer graphene's electronic properties. Yet, the exact crystallographic structure on which their band structure depends remains highly debated. In this scanning tunneling microscopy and density functional theory study, we have analysed graphene samples grown on multilayer graphene prepared onto SiC and on the close-packed surfaces of Re and Ir with ultra-high precision. We resolve small-angle twists and shears in graphene, and identify large unit cells comprising more than 1,000 carbon atoms and exhibiting non-trivial nanopatterns for moiré superlattices, which are commensurate to the graphene lattice. Finally, a general formalism applicable to any hexagonal moiré is presented to classify all reported structures.

Cerium Oxide Nanoclusters on Graphene/Ru(0001): Intercalation of Oxygen via Spillover

Cerium oxide is an important catalytic material known for its ability to store and release oxygen, and as such, it has been used in a range of applications, both as an active catalyst and as a catalyst support. Using scanning tunneling microscopy and Auger electron spectroscopy, we investigated oxygen interactions with CeOx nanoclusters on a complete graphene monolayer-covered Ru(0001) surface at elevated temperatures (600-725 K). Under oxidizing conditions (PO2 = 1 × 10(-7) Torr), oxygen intercalation under the graphene layer is observed. Time dependent studies demonstrate that the intercalation proceeds via spillover of oxygen from CeOx nanoclusters through the graphene (Gr) layer onto the Ru(0001) substrate and extends until the Gr layer is completely intercalated. Atomically resolved images further show that oxygen forms a p(2 × 1) structure underneath the Gr monolayer. Temperature dependent studies yield an apparent kinetic barrier for the intercalation of 1.21 eV. This value correlates well with the theoretically determined value for the reduction of small CeO2 clusters reported previously. At higher temperatures, the intercalation is followed by a slower etching of the intercalated graphene (apparent barrier of 1.60 eV). Vacuum annealing of the intercalated Gr leads to the formation of carbon monoxide, causing etching of the graphene film, demonstrating that the spillover of oxygen is not reversible. In agreement with previous studies, no intercalation is observed on a complete graphene monolayer without CeOx clusters, even in the presence of a large number of point defects. These studies demonstrate that the easily reducible CeOx clusters act as intercalation gateways capable of efficiently delivering oxygen underneath the graphene layer.

Moiré induced organization of size-selected Pt clusters soft landed on epitaxial graphene

Two-dimensional hexagonal arrays of Pt nanoparticles (1.5 nm diameter) have been obtained by deposition of preformed and size selected Pt nanoparticles on graphene. This original self-organization is induced, at room temperature, by the 2D periodic undulation (the moiré pattern) of graphene epitaxially grown on the Ir(111) surface. By means of complementary techniques (scanning tunneling microscopy, grazing incidence X ray scattering), the Pt clusters shapes and organization are characterized and the structural evolution during annealing is investigated. The soft-landed clusters remain quasi-spherical and a large proportion appears to be pinned on specific moiré sites. The quantitative determination of the proportion of organized clusters reveals that the obtained hexagonal array of the almost spherical nanoparticles is stable up to 650 K, which is an indication of a strong cluster-surface interaction.

Graphene growth and properties on metal substrates

Graphene-metal interface as one of the interesting graphene-based objects attracts much attention from both application and fundamental science points of view. This paper gives a timely review of the recent experimental works on the growth and the electronic properties of the graphene-metal interfaces. This work makes a link between huge amount of experimental and theoretical data allowing one to understand the influence of the metallic substrate on the electronic properties of a graphene overlayer and how its properties can be modified in a controllable way. The further directions of studies and applications of the graphene-metal interfaces are discussed.

Towards scalable nano-engineering of graphene

By merging bottom-up and top-down strategies we tailor graphene's electronic properties within nanometer accuracy, which opens up the possibility to design optical and plasmonic circuitries at will. In a first step, graphene electronic properties are macroscopically modified exploiting the periodic potential generated by the self assembly of metal cluster superlattices on a graphene/Ir(111) surface. We then demonstrate that individual metal clusters can be selectively removed by a STM tip with perfect reproducibility and that the structures so created are stable even at room temperature. This enables one to nanopattern circuits down to the 2.5 nm only limited by the periodicity of the Moiré-pattern, i.e., by the distance between neighbouring clusters, and different electronic and optical properties should prevail in the covered and uncovered regions. The method can be carried out on micro-meter-sized regions with clusters of different materials permitting to tune the strength of the periodic potential.

Molecular self-assembly on graphene

The formation of ordered arrays of molecules via self-assembly is a rapid, scalable route towards the realization of nanoscale architectures with tailored properties. In recent years, graphene has emerged as an appealing substrate for molecular self-assembly in two dimensions. Here, the first five years of progress in supramolecular organization on graphene are reviewed. The self-assembly process can vary depending on the type of graphene employed: epitaxial graphene, grown in situ on a metal surface, and non-epitaxial graphene, transferred onto an arbitrary substrate, can have different effects on the final structure. On epitaxial graphene, the process is sensitive to the interaction between the graphene and the substrate on which it is grown. In the case of graphene that strongly interacts with its substrate, such as graphene/Ru(0001), the inhomogeneous adsorption landscape of the graphene moiré superlattice provides a unique opportunity for guiding molecular organization, since molecules experience spatially constrained diffusion and adsorption. On weaker-interacting epitaxial graphene films, and on non-epitaxial graphene transferred onto a host substrate, self-assembly leads to films similar to those obtained on graphite surfaces. The efficacy of a graphene layer for facilitating planar adsorption of aromatic molecules has been repeatedly demonstrated, indicating that it can be used to direct molecular adsorption, and therefore carrier transport, in a certain orientation, and suggesting that the use of transferred graphene may allow for predictible molecular self-assembly on a wide range of surfaces.

Regular arrays of Pd and PdAu clusters on ultrathin alumina films for reactivity studies

Regular arrays of Pd and PdAu clusters with tunable size and composition supported on nanostructured alumina usable as model catalysts.

Templating ultra-small manganese isomers with preference for adsorption sites and narrow distribution tuned by different moiré periodicities of monolayer graphene on Ru(0001)

The process of templating a manganese nanocluster with the 12 × 12 moiré and other two slightly distorted graphene/Ru(0001) moirés was investigated by scanning tunneling microscopy (STM). At the initial stage of nucleation, different adsorption modes for Mn monomer, dimer and trimer guided by various moiré periodicities were observed. Upon Mn coverage increasing, STM measurements revealed that Mn clusters exhibit a detectable preference for adsorption sites on all the three different moirés. The most favorable adsorption sites for Mn clusters are the fcc regions, where ordering of Mn clusters was observable, and the lateral size of the clusters are tunable with coverage. A density functional theory calculation also showed that magnetism appears with a magnetic moment of 3.79μ(B) for Mn monomer on MLG/Ru(0001).

CO-induced smoluchowski ripening of Pt cluster arrays on the graphene/Ir(111) moiré

Regular Pt cluster arrays grown on the moiré template formed by graphene on Ir(111) were tested for their stability with respect to CO gas exposure. Cluster stability and adsorption-induced processes were analyzed as a function of cluster size, with in situ scanning tunneling microscopy and X-ray photoelectron spectroscopy. Small clusters containing fewer than 10 atoms were unstable upon CO adsorption. They sintered through Smoluchowski ripening-cluster diffusion and coalescence-rather than the frequently reported Ostwald ripening mediated by metal-adsorbate complexes. Larger clusters remained immobile upon CO adsorption but became more three-dimensional. Careful analysis of the experimental data complemented by ab initio density functional theory calculations provides insight into the origin of the CO-induced Pt cluster ripening and shape transformations.

Atomic structure and crystalline order of graphene-supported ir nanoparticle lattices

We present the atomic structure of Ir nanoparticles with 1.5 nm diameter at half height and three layers average height grown on graphene/Ir(111). Using surface x-ray diffraction, we demonstrate that Ir nanoparticles on graphene/Ir(111) form a crystallographic superlattice with high perfection. The superlattice arrangement allows us to obtain detailed information on the atomic structure of the nanoparticles themselves, such as size, shape, internal layer stacking and strain. Our experiments disclose that the nanoparticles reside epitaxially on top of the graphene moiré structure on Ir(111), resulting in significant lateral compressive intraparticle strain. Normal incidence x-ray standing wave experiments deliver additional information on the particle formation induced restructuring of the graphene layer.

Size-selected monodisperse nanoclusters on supported graphene: bonding, isomerism, and mobility

Soft-landing of size-selected Pd(n) (n ≤ 20) nanoclusters on a Moiré-patterned surface of graphene adsorbed on Ru(0001) leads to controlled formation of a truly monodisperse cluster-assembled material. Combined scanning tunneling microscopy and first-principles calculations allow identification of selective adsorption sites, characterization of size-dependent cluster isomers, and exploration of interconversion processes between isomeric forms that manifestly influence cluster surface mobility. Surface-assembled cluster superstructures may be employed in nanocatalytic applications, as well as in fundamental investigations of physical factors controlling bonding, structure, isomerism, and surface mobilities of surface-supported clusters.

Yield and shape selection of graphene nanoislands grown on Ni(111)

The catalytic decomposition of hydrocarbons on transition-metal surfaces has attracted increasing interest as a method to prepare high quality graphene layers. Here, we study the optimal reaction path for the preparation of graphene nanoislands of selected shape using controlled decomposition of propene on Ni(111). Scanning tunneling microscopy performed at different stages of the reaction provides insight into the temperature and dose-dependent growth of graphene islands, which precedes the formation of monolayer graphene. The effect of postreaction annealing on the morphology of the islands is studied. By adjusting the initial propene dose, reaction temperature, and postannealing procedure, islands with a triangular or hexagonal shape can be selectively obtained.

Growth of PtRu clusters on Ru(0001)-supported monolayer graphene films

We report on results of a detailed scanning tunnelling microscopy study on the formation, size and size distribution, and internal structure of small bimetallic PtRu clusters on a graphene monolayer film supported on a Ru(0001) substrate. These clusters, with sizes around ∼15 (Ru) or ∼40 (Pt) atoms per cluster at the lowest coverage, are interesting model systems for the catalytic behaviour of small metal PtRu particles, for example for application in electrocatalytic oxidation reactions. The clusters were generated by sequential deposition of the two metals at room temperature. The data reveal a distinct influence of the deposition sequence on the cluster formation process, with Ru pre-deposition followed by Pt deposition leading to predominantly bimetallic clusters, possibly with a core-shell-type structure, while the reverse sequence results in co-existent mono- and bimetallic clusters, where the latter are likely to intermix at the interface. The observations are related to the nucleation process of the respective metals on the templated surface, and the 2D growth behaviour of the two metals.

Time-resolved two-photon photoemission of unoccupied electronic states of periodically rippled graphene on Ru(0001)

The unoccupied electronic states of epitaxially grown graphene on Ru(0001) have been explored by time- and angle-resolved two-photon photoemission. We identify a Ru derived resonance and a Ru/graphene interface state at 0.91 and 2.58 eV above the Fermi level, as well as three image-potential derived states close to the vacuum level. The most strongly bound, short-lived, and least dispersing image-potential state is suggested to have some quantum-well character with a large amplitude below the graphene hills. The two other image-potential states are attributed to a series of slightly decoupled states. Their lifetimes and dispersions are indicative of electrons moving almost freely above the valley areas of the moiré superstructure of graphene.

Using the graphene Moiré pattern for the trapping of C60 and homoepitaxy of graphene

The graphene Moiré superstructure offers a complex landscape of humps and valleys to molecules adsorbing and diffusing on it. Using C(60) molecules as the classic hard sphere analogue, we examine its assembly and layered growth on this corrugated landscape. At the monolayer level, the cohesive interactions of C(60) molecules adsorbing on the Moiré lattice freeze the molecular rotation of C(60) trapped in the valley sites, resulting in molecular alignment of all similarly trapped C(60) molecules at room temperature. The hierarchy of adsorption potential well on the Moiré lattice causes diffusion-limited dendritic growth of C(60) films, as opposed to isotropic growth observed on a smooth surface like graphite. Due to the strong binding energy of the C(60) film, part of the dentritic C(60) films polymerize at 850 K and act as solid carbon sources for graphene homoepitaxy. Our findings point to the possibility of using periodically corrugated graphene in molecular spintronics due to its ability to trap and align organic molecules at room temperature.

Intermolecular vs molecule-substrate interactions: A combined STM and theoretical study of supramolecular phases on graphene/Ru(0001)

The competition between intermolecular interactions and long-range lateral variations in the substrate-adsorbate interaction was studied by scanning tunnelling microscopy (STM) and force field based calculations, by comparing the phase formation of (sub-) monolayers of the organic molecules (i) 2-phenyl-4,6-bis(6-(pyridin-3-yl)-4-(pyridin-3-yl)pyridin-2-yl)pyrimidine (3,3'-BTP) and (ii) 3,4,9,10-perylene tetracarboxylic-dianhydride (PTCDA) on graphene/Ru(0001). For PTCDA adsorption, a 2D adlayer phase was formed, which extended over large areas, while for 3,3'-BTP adsorption linear or ring like structures were formed, which exclusively populated the areas between the maxima of the moiré structure of the buckled graphene layer. The consequences for the competing intermolecular interactions and corrugation in the adsorption potential are discussed and compared with the theoretical results.

Single terrace growth of graphene on a metal surface

The epitaxial growth of graphene by chemical vapor deposition of ethylene on a Ru(0001) surface was monitored by high-temperature scanning tunneling microscopy. The in situ data show that at low pressures and high temperatures the metal surface facets into large terraces, leading to much better ordered graphene layers than resulting from the known growth mode. Density functional theory calculations show that the single terrace growth mode can be understood from the energetics of the graphene-metal interaction.

Graphene on Ru(0001): contact formation and chemical reactivity on the atomic scale

Graphene on Ru(0001) is contacted with Au tips of a cryogenic scanning tunneling microscope. The formation and conductance of single-atom contacts vary within the moiré unit cell. Density functional calculations reveal that elastic distortions of the graphene lattice occur at contact due to a selectively enhanced chemical reactivity of C atoms at hollow sites of Ru(0001). Concomitant quantum transport calculations indicate that the graphene-Ru distance determines the conductance variations.

Epitaxial graphene on Cu(111)

The growth of graphene on single crystal Cu(111) has been achieved by thermal decomposition of ethylene in an ultrahigh vacuum chamber for the first time. The structural and electronic properties of graphene on Cu(111) have been investigated by scanning tunneling microscopy and spectroscopy. The nucleation of monolayer islands and two predominant domain orientations have been observed, which lead to the formation of numerous domain boundaries with increasing coverage. These results reveal that reducing the density of domain boundaries is one challenge of growing high-quality graphene on copper.