Design of the reflective optics for Tore Supra ECEI system

Integration of an Electron Cyclotron Imaging diagnostic system on the WEST tokamak

An Electron Cyclotron Emission Imaging (ECEI) diagnostic system for the WEST tokamak has been developed under the UNIST-WEST collaboration. This diagnostic system is designed to overcome accessibility and thermomechanical constraints for long pulse operation. The first O-mode channel will be installed in the first trimester of 2019 to probe the low field side (LFS) of the WEST plasma. Two large metallic reflective mirrors are installed inside the duct which is being used for maintenance access. They are suspended on a rail to facilitate mirror manipulation. The ex-vessel optical system (lens, detection array, etc.) is housed in a compact optical enclosure that fits in a tight free space between the port flange and tokamak access lobby. The design emphasized reproducibility of the precise alignment between in-vessel mirrors and optical enclosure since the both elements must be removed during shutdown period for maintenance access. The overall optical system was fully tested at UNIST last year. The test results demonstrated that the imaging optics can full access at any radial position on the LFS. The 2D beam pattern measurements were consistent with the design values.

Compact ECEI system with in-vessel reflective optics for WEST

An electron cyclotron emission imaging (ECEI) diagnostic system for WEST (W Environment for Steady state Tokamak) is under development to study the MHD instabilities affected by tungsten impurities. The system will provide 2-D T_e fluctuation images (width × height = ∼18 cm × ∼ 34 cm at low field side and ∼13 cm × ∼ 39 cm at high field side) from a poloidal cross section with high spatial (≤1.7 cm) and temporal (≤2 μs) resolutions. While the key concept and electronic structure are similar to that of prior ECEI systems on other tokamak devices such as KSTAR, DIII-D, or ASDEX-U, part of the imaging optics have to be placed inside the vacuum vessel in order to resolve issues on limited installation space and longer beam path to the detector position. The in-vessel optics consisting of two large curvature-radius mirrors are expected to withstand the extreme heating on long-pulse operation scenario (∼1000 s). The out-vessel optical housing is constructed as compact as possible to remove easily from the installation site in case of necessity. Commissioning of the system is scheduled on the second experimental WEST campaign end of 2017.

Quasi 3D ECE imaging system for study of MHD instabilities in KSTAR

A second electron cyclotron emission imaging (ECEI) system has been installed on the KSTAR tokamak, toroidally separated by 1/16th of the torus from the first ECEI system. For the first time, the dynamical evolutions of MHD instabilities from the plasma core to the edge have been visualized in quasi-3D for a wide range of the KSTAR operation (B0 = 1.7∼3.5 T). This flexible diagnostic capability has been realized by substantial improvements in large-aperture quasi-optical microwave components including the development of broad-band polarization rotators for imaging of the fundamental ordinary ECE as well as the usual 2nd harmonic extraordinary ECE.