Improving the signal-to-noise ratio of high-speed contact mode atomic force microscopy

Large area high-speed metrology SPM system

We present a large area high-speed measuring system capable of rapidly generating nanometre resolution scanning probe microscopy data over mm(2) regions. The system combines a slow moving but accurate large area XYZ scanner with a very fast but less accurate small area XY scanner. This arrangement enables very large areas to be scanned by stitching together the small, rapidly acquired, images from the fast XY scanner while simultaneously moving the slow XYZ scanner across the region of interest. In order to successfully merge the image sequences together two software approaches for calibrating the data from the fast scanner are described. The first utilizes the low uncertainty interferometric sensors of the XYZ scanner while the second implements a genetic algorithm with multiple parameter fitting during the data merging step of the image stitching process. The basic uncertainty components related to these high-speed measurements are also discussed. Both techniques are shown to successfully enable high-resolution, large area images to be generated at least an order of magnitude faster than with a conventional atomic force microscope.

Opportunities in high-speed atomic force microscopy

The atomic force microscope (AFM) has become integrated into standard characterisation procedures in many different areas of research. Nonetheless, typical imaging rates of commercial microscopes are still very slow, much to the frustration of the user. Developments in instrumentation for "high-speed AFM" (HSAFM) have been ongoing since the 1990s, and now nanometer resolution imaging at video rate is readily achievable. Despite thorough investigation of samples of a biological nature, use of HSAFM instruments to image samples of interest to materials scientists, or to carry out AFM lithography, has been minimal. This review gives a summary of different approaches to and advances in the development of high-speed AFMs, highlights important discoveries made with new instruments, and briefly discusses new possibilities for HSAFM in materials science.

Disclosing and overcoming the trade-off between noise and scanning speed in atomic force microscopy

Traditional dynamic modalities for atomic force microscopy imaging suffer from a stringent trade-off between fast scanning speed, weak interaction forces and accurate topography reconstruction. Finding an effective compromise between these aspects is often challenging, especially for soft biological samples for which stringent requirements hold when imaged in vivo. In this paper the main causes of this undesired trade-off in standard systems are analyzed and the exploitation of the intrinsic dynamics of the cantilever through a nonlinear control strategy is proposed as a method to overcome this limitation. A direct application to imaging of biological samples is reported to validate the results and show the effectiveness of the proposed technique.

Piezoelectric bimorph-based scanner in the tip-scan mode for high speed atomic force microscope

A piezoelectric bimorph-based scanner operating in tip-scan mode for high speed atomic force microscope (AFM) is first presented. The free end of the bimorph is used for fixing an AFM cantilever probe and the other one is mounted on the AFM head. The sample is placed on the top of a piezoelectric tube scanner. High speed scan is performed with the bimorph that vibrates at the resonant frequency, while slow scanning is carried out by the tube scanner. The design and performance of the scanner is discussed and given in detailed. Combined with a commercially available data acquisition system, a high speed AFM has been built successfully. By real-time observing the deformation of the pores on the surface of a commercial piezoelectric lead zirconate titanate (PZT-5) ceramics under electric field, the dynamic imaging capability of the AFM is demonstrated. The results show that the notable advantage of the AFM is that dynamic process of the sample with large dimensions can be easily investigated. In addition, this design could provide a way to study a sample in real time under the given experimental condition, such as under an external electric field, on a heating stage, or in a liquid cell.