Photodissociation dynamics of OClO at 157 nm

Accelerated degradation of micro-pollutant by combined UV and chlorine dioxide: Unexpected inhibition of chlorite formation

UV/chlorine dioxide (ClO2) process can be intentionally or accidently conducted and is potentially effective in micro-pollutants degradation. UV irradiation can promote ClO2 decay and subsequently result in the formation of reactive radicals. Hence, the co-exposure of ClO2 and UV exhibited a synergetic effect on metribuzin (MET) degradation. The MET degradation was promoted by UV/ClO2 with a rate of 0.089 min-1 at pH 7.5, which was around 2.4 folds the total of rates caused by single ClO2 (0.004 min-1) and single UV (0.033 min-1). Reactive radicals mainly HO• and reactive chlorine species were involved in the acceleration effect, and contributed to 59%-67% of the total degradation rate of MET during UV/ClO2 under pHs 5.5-7.5. Among them, HO• was the predominant contributor and the contribution rate gradually rose under higher pH. Chlorite (ClO2-) and chlorate (ClO3-) formation has been the major concern of ClO2 oxidation. However, a comparison of their formation during UV/ClO2 and ClO2 oxidation is rarely reported. Herein, during MET degradation by ClO2, only ClO2- was identified with the highest amount of 1.17 mg L-1. Conversely, during MET degradation by UV/ClO2, only ClO3- was identified with the highest amount of 0.68 mg L-1, showing an upward trend with prolonging treatment time. Furthermore, organic halogenated DBPs formation after 24 h post-chlorination with UV/ClO2 and ClO2 pre-treatments was comparatively evaluated. Organic DBPs formation after post-chlorination was higher with UV/ClO2 pre-treatment compared to ClO2 pre-treatment. The overall concentration of DBPs produced with 30 min UV/ClO2 pre-treatment was about 4.5 times that with 1min UV/ClO2 pre-treatment. This study provided useful reference for the application of UV/ClO2 in micro-pollutants degradation.

Comparison of UV-induced AOPs (UV/Cl2, UV/NH2Cl, UV/ClO2 and UV/H2O2 ) in the degradation of iopamidol: Kinetics, energy requirements and DBPs-related toxicity in sequential disinfection processes

The UV-induced advanced oxidation processes (AOPs, including UV/Cl₂, UV/NH₂Cl, UV/ClO₂ and UV/H₂O₂ ) degradation kinetics and energy requirements of iopamidol as well as DBPs-related toxicity in sequential disinfection were compared in this study. The photodegradation of iopamidol in these processes can be well described by pseudo-first-order model and the removal efficiency ranked in descending order of UV/Cl₂  > UV/H₂O₂  > UV/NH₂Cl > UV/ClO₂  > UV. The synergistic effects could be attributed to diverse radical species generated in each system. Influencing factors of oxidant dosage, UV intensity, solution pH and water matrixes (Cl^- , NH₄ ⁺ and nature organic matter) were evaluated in detail. Higher oxidant dosages and greater UV intensities led to bigger pseudo-first-order rate constants (K_obs) in these processes, but the pH behaviors exhibited quite differently. The presence of Cl^- , NH₄ ⁺ and nature organic matter posed different effects on the degradation rate. The parameter of electrical energy per order (EE/O) was adopted to evaluate the energy requirements of the tested systems and it followed the trend of UV/ClO₂  > UV > UV/NH₂Cl > UV/H₂O₂  > UV/Cl₂ . Pretreatment of iopamidol by UV/Cl₂ and UV/NH₂Cl clearly enhanced the production of classical disinfection by-products (DBPs) and iodo-trihalomethanes (I-THMs) during subsequent oxidation while UV/ClO₂ and UV/H₂O₂ exhibited almost elimination effect. From the perspective of weighted water toxicity, the risk ranking was UV/NH₂Cl > UV/Cl₂ > UV > UV/H₂O₂ > UV/ClO₂ . Among the discussed UV-driven AOPs, UV/Cl₂ was proved to be the most cost-effective one for iopamidol removal while UV/ClO₂ displayed overwhelming advantages in regulating the water toxicity associated with DBPs, especially I-THMs. The present results could provide some insights into the application of UV-activated AOPs technologies in tradeoffs between cost-effectiveness assessment and DBPs-related toxicity control of the disinfected waters containing iopamidol.

Beam Action Spectroscopy via Inelastic Scattering

In this article, a new technique we call Beam Action Spectroscopy via Inelastic Scattering (BASIS) is demonstrated. BASIS takes advantage of the sensitivity of rotational state distributions in a supersonic molecular beam to inelastic scattering within the beam. We exploit BASIS to achieve increased sensitivity in two very different types of experiments. In the first, the UV photodissociation spectrum of OClO is recovered by monitoring intensity changes in the pure rotational transition of a spectator molecule (OCS) downstream from the nozzle, revealing a new vibrational structure in the region between 30,000 and 36,000 cm(-1). In the second, the mid-IR vibrational spectrum of acetylene is recorded simply by monitoring a single pure rotational transition of OCS co-expanded with acetylene. The technique may prove particularly fruitful when an excitation process produces product dark states that are not easily probed by conventional spectroscopy.