Contributed review: optical micro- and nanofiber pulling rig

Self-Sustaining Water Microdroplet Resonators Using 3D-Printed Microfluidics

Microdroplet resonators provide an excellent tool for optical studies of water, but water microdroplets are difficult to maintain outside a carefully controlled environment. We present a method for maintaining a water microdroplet resonator on a 3D-printed hydrophobic surface in an ambient environment. The droplet is maintained through a passive microfluidic system that supplies water to the droplet through a vertical channel at a rate equivalent to its evaporation. In this manner, we are able to create and passively maintain water microdroplet resonators with quality factors as high as 3×108.

Particle trapping with optical nanofibers: a review [Invited]

Optical trapping has proven to be an efficient method to control particles, including biological cells, single biological macromolecules, colloidal microparticles, and nanoparticles. Multiple types of particles have been successfully trapped, leading to various applications of optical tweezers ranging from biomedical through physics to material sciences. However, precise manipulation of particles with complex composition or of sizes down to nanometer-scales can be difficult with conventional optical tweezers, and an alternative manipulation tool is desirable. Optical nanofibers, that is, fibers with a waist diameter smaller than the propagating wavelength of light, are ideal candidates for optical manipulation due to their large evanescent field that extends beyond the fiber surface. They have the added advantages of being easily connected to a fibered experimental setup, being simple to fabricate, and providing strong electric field confinement and intense magnitude of evanescent fields at the nanofiber's surface. Many different particles have been trapped, rotated, transported, and assembled with such a system. This article reviews particle trapping using optical nanofibers and highlights some challenges and future potentials of this developing topic.

Waveguide-integrated chip-scale optomechanical magnetometer

Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read-out via a suspended optical waveguide fabricated on the same silicon chip as the magnetometer. Moreover, we demonstrate that thermomechanical noise limited sensitivity is possible using portable electronics and laser. The magnetometer employs a silica microdisk resonator selectively sputtered with a magnetostrictive film of galfenol (FeGa) which induces a resonant frequency shift in response to an external magnetic field. Experimental results reveal the retention of high quality-factor optical whispering gallery mode resonances whilst also demonstrating high sensitivity and dynamic range in ambient conditions. The use of off-the-shelf portable electronics without compromising sensor performance demonstrates promise for applications.

Evanescent field trapping and propulsion of Janus particles along optical nanofibers

Small composite objects, known as Janus particles, drive sustained scientific interest primarily targeted at biomedical applications, where such objects act as micro- or nanoscale actuators, carriers, or imaging agents. A major practical challenge is to develop effective methods for the manipulation of Janus particles. The available long-range methods mostly rely on chemical reactions or thermal gradients, therefore having limited precision and strong dependency on the content and properties of the carrier fluid. To tackle these limitations, we propose the manipulation of Janus particles (here, silica microspheres half-coated with gold) by optical forces in the evanescent field of an optical nanofiber. We find that Janus particles exhibit strong transverse localization on the nanofiber and much faster propulsion compared to all-dielectric particles of the same size. These results establish the effectiveness of near-field geometries for optical manipulation of composite particles, where new waveguide-based or plasmonic solutions could be envisaged.

Measurement of the absolute radius, refractive index, and dispersion of a long cylinder

Long cylinders, such as optical fibers, are some of the most widely used photonic devices. The radius and refractive index of these fibers are therefore fundamentally important parameters in determining their performance. We have developed a method to determine the absolute radius, refractive index, and chromatic dispersion of a long cylinder using only the resonance wavelengths of the whispering gallery modes around its circumference for two different polarizations. Since this method only requires the measurement of resonance wavelengths, it is non-destructive and it can be performed using standard equipment. As a proof-of-concept, we demonstrate the method on a 125µm optical fiber and an 80µm borosilicate capillary fiber with thick walls, obtaining values for the diameter and the refractive index with an accuracy of 2 nm and 2 × 10^-5, respectively.

Refractive index sensitivity of Brillouin acoustic modes in single-mode subwavelength-diameter fibers

The acousto-optic interaction is strongly modified and different in subwavelength confinement. Here, the optical propagation and acoustic propagation in a subwavelength-diameter fiber (SDF) have been investigated through adopting a two-layer fiber model of air-coated silica rod. Theoretical investigation indicates that SDF with a diameter below 1.2 µm supports the single mode of light propagation, and various Brillouin acoustic modes with well-spaced spectral distribution can be also excited. Due to the light propagation with the outer environment as the cladding layer, the surrounding medium will greatly affect Brillouin scattering of SDFs. Both the simulation and experiment results indicate a relatively good linear relationship between the Brillouin frequency shift of the lower acoustic modes and surrounding environmental refractive index (RI), and the higher RI sensitivity in finer SDFs can be obtained. In addition, hybrid acoustic waves have shown higher sensitivity and stability than surface acoustic modes. A RI sensitivity of about 5.1 GHz/RIU has been achieved in a 1.1 µm SDF, demonstrating its potential application in RI sensing.

3D printed mounts for microdroplet resonators

Liquid microdroplet resonators provide an excellent tool for optical studies due to their innate smoothness and high quality factors, but precise control over their geometries can be difficult. In contrast, three dimensional (3D) printed components are highly customizable but suffer from roughness and pixelation. We present 3D printed structures which leverage the versatility of 3D printing with the smoothness of microdroplets. Our devices enable the reliable creation of microdroplet resonators of varying shapes and sizes in an ambient environment, and our coupling scheme allows for high control over droplet position.

Highly accessible low-loss fiber tapering by the ceramic housed electric furnace (CHEF) and frequency-domain real-time monitoring

Tapered optical fibers are versatile tools with a wide spectrum of applications, ranging from sensing to atomic physics. In this work, we developed a highly accessible and controllable fiber tapering system to fabricate tapered optical fibers with a routine optical transmission of 95% and above. With an optimal design, optical transmissions higher than 99% have been experimentally demonstrated. We achieved such results by developing two unique components in a traditional heat-and-pull system: a custom-made miniature heater named as the ceramic housed electric furnace (CHEF) and a real-time, frequency-domain monitoring method. The CHEF enables a well-controlled, uniform, and stable heating zone for an adiabatic tapering process, while the frequency-domain monitoring empowers one to reliably terminate the tapering right after the single-mode trigger. We designed and fabricated the CHEF using low-cost and readily accessible materials and equipment, in order to benefit a broader audience. We carried out a parametric study to systematically characterize the CHEF performance and provided guidelines for the CHEF design, fabrication, and operation. The frequency-domain monitoring method was developed based on our understanding of the dynamic evolution of optical modes in the tapered fiber. Such a method allows real-time visualization of the number of optical models and characterization of the taper adiabaticity during the tapering process, both of which are not available with the commonly used time-domain monitoring. The developed CHEF-based fiber tapering system will meet the urgent need of high-quality tapered optical fibers as well as opening doors to new applications of tapered optical fibers.

Optical transport of sub-micron lipid vesicles along a nanofiber

Enhanced manipulation and analysis of bio-particles using light confined in nano-scale dielectric structures has proceeded apace in the last several years. Small mode volumes, along with the lack of a need for bulky optical elements give advantages in sensitivity and scalability relative to conventional optical manipulation. However, manipulation of lipid vesicles (liposomes) remains difficult, particularly in the sub-micron diameter regime. Here we demonstrate the optical trapping and transport of sub-micron diameter liposomes along an optical nanofiber using the nanofiber mode's evanescent field. We find that nanofiber diameters below a nominal diffraction limit give optimal results. Our results pave the way for integrated optical transport and analysis of liposome-like bio-particles, as well as their coupling to nano-optical resonators.

A broadband and low-power light-control-light effect in a fiber-optic nano-optomechanical system

The coupling of the optical and mechanical degrees of freedom using optical force in nano-devices offers a novel mechanism to implement all-optical signal processing. However, the ultra-weak optical force requires a high pump optical power to realize all-optical processing. For such devices, it is still challenging to lower the pump power and simultaneously broaden the bandwidth of the signal light under processing. In this work, a simple and cost-effective optomechanical scheme was demonstrated that was capable of achieving a broadband (208 nm) and micro-Watt (∼624.13 μW) light-control-light effect driven by a relatively weak optical force (∼3 pN). In the scheme, a tapered nanofiber (TNF) was evanescently coupled with a substrate, allowing the pump light guided in the TNF to generate a strong transverse optical force for the light-control-light effect. Additionally, thanks to the low stiffness (5.44 fN nm^-1) of the TNF, the light-control-light scheme also provided a simple method to measure the static weak optical force with a minimum detectable optical force down to 380.8 fN. The results establish TNF as a cost-effective scheme to break the limitation of the modulation wavelength bandwidth (MWB) at a low pump power and show that the TNF-optic optomechanical system can be well described as a harmonic oscillator.

Plug-and-play fiber to waveguide connector

The mass production and commercialization of integrated photonics have been slowed down by the high cost of packaging its optical interfaces. We show a plug-and-play connector between a fiber and a nanophotonic waveguide consisting of a 3D polymer structure with a fiber entrance port that simultaneously achieves mechanical and optical passive alignment with tolerance beyond ±10 μm to the fiber input position. We take advantage of a mechanical and optical co-design, analogous to commercial fiber-to-fiber connectors. We fabricate the plug-and-play couplers using 3D nanoprinting directly on foundry fabricated diffraction grating couplers. We measure an average of only 0.05 dB excess coupling loss between a single mode fiber and a high confinement silicon waveguide in addition to the inherent grating coupler loss. Our coupling platform offers a passive plug-and-play solution for scalable integrated photonics fiber-chip packaging.

Effect of Tm3+ concentration on the emission wavelength shift in Tm3+-doped silica microsphere lasers

In this work, a Tm³⁺-doped solgel silica microsphere lasing at 2.0 μm is reported. Microspheres with different Tm³⁺ concentrations are fabricated by overlaying different Tm³⁺ concentration solgel solutions on the surface of a pure silica microsphere resonator and then annealing the sample with a CO₂ laser. Based on a traditional fiber taper-microsphere coupling method, single and multimode microsphere lasing in the wavelength range 1.8-2.0 μm is observed if an 808 nm laser diode is used as a pump source. A relatively low threshold pumping power of 1.2 mW is achieved using this arrangement. This solgel method allows for an easy varying of the Tm³⁺ doping concentration. The observed laser output shifts to longer wavelengths when the Tm³⁺ doping concentration increases. This has been explained by the larger Tm absorption at shorter wavelengths. The ability to fabricate solgel co-doped silica glass microlasers represents a new generation of low threshold and compact infrared laser sources for use as miniaturized photonic components for a wide range of applications, including gas sensing and medical surgery.

Tailoring a nanofiber for enhanced photon emission and coupling efficiency from single quantum emitters

We present a novel approach to enhance the spontaneous emission rate of single quantum emitters in an optical nanofiber-based cavity by introducing a narrow air-filled groove into the cavity. Our results show that the Purcell factor for single quantum emitters inside the groove of the nanofiber-based cavity can be at least six times greater than for such an emitter on the fiber surface when using an optimized cavity mode and groove width. Moreover, the coupling efficiency of single quantum emitters into the guided mode of this nanofiber-based cavity can reach up to ∼80% with only 35 cavity-grating periods. This new system has the potential to act as an all-fiber platform to realize efficient coupling of photons from single emitters into an optical fiber for quantum information applications.

Micro/Nanofibre Optical Sensors: Challenges and Prospects

Micro/nanofibres (MNFs) are optical fibres with diameters close to or below the vacuum wavelength of visible or near-infrared light. Due to its wavelength- or sub-wavelength scale diameter and relatively large index contrast between the core and cladding, an MNF can offer engineerable waveguiding properties including optical confinement, fractional evanescent fields and surface intensity, which is very attractive to optical sensing on the micro and nanometer scale. In particular, the waveguided low-loss tightly confined large fractional evanescent fields, enabled by atomic level surface roughness and extraordinary geometric and material uniformity in a glass MNF, is one of its most prominent merits in realizing optical sensing with high sensitivity and great versatility. Meanwhile, the mesoporous matrix and small diameter of a polymer MNF, make it an excellent host fibre for functional materials for fast-response optical sensing. In this tutorial, we first introduce the basics of MNF optics and MNF optical sensors, and review the progress and current status of this field. Then, we discuss challenges and prospects of MNF sensors to some extent, with several clues for future studies. Finally, we conclude with a brief outlook for MNF optical sensors.

Fiber taper diameter characterization using forward Brillouin scattering

We propose a fast and non-destructive method to characterize the absolute diameter and uniformity of micrometer-scale fiber tapers using a pump and probe forward Brillouin scattering setup. The fundamental torsional-radial acoustic mode supported by the wire is excited using a pulsed pump laser and oscillates at a frequency that is inversely proportional to the taper waist diameter. This standing time-varying torsional-radial wave induces polarization modulation on a probe signal, whose spectrum structure reveals the sample diameter and its non-uniformity. By comparing our results with measurements using scanning-electron microscopy, a relative deviation of 1% or less was demonstrated, and diameter non-uniformity of less than 0.5% could be detected.

Complete linear optical isolation at the microscale with ultralow loss

Low-loss optical isolators and circulators are critical nonreciprocal components for signal routing and protection, but their chip-scale integration is not yet practical using standard photonics foundry processes. The significant challenges that confront integration of magneto-optic nonreciprocal systems on chip have made imperative the exploration of magnet free alternatives. However, none of these approaches have yet demonstrated linear optical isolation with ideal characteristics over a microscale footprint – simultaneously incorporating large contrast with ultralow forward loss – having fundamental compatibility with photonic integration in standard waveguide materials. Here we demonstrate that complete linear optical isolation can be obtained within any dielectric waveguide using only a whispering-gallery microresonator pumped by a single-frequency laser. The isolation originates from a nonreciprocal induced transparency based on a coherent light-sound interaction, with the coupling originating from the traveling-wave Brillouin scattering interaction, that breaks time-reversal symmetry within the waveguide-resonator system. Our result demonstrates that material-agnostic and wavelength-agnostic optical isolation is far more accessible for chip-scale photonics than previously thought.

Nonlinear force dependence on optically bound micro-particle arrays in the evanescent fields of fundamental and higher order microfibre modes

Particles trapped in the evanescent field of an ultrathin optical fibre interact over very long distances via multiple scattering of the fibre-guided fields. In ultrathin fibres that support higher order modes, these interactions are stronger and exhibit qualitatively new behaviour due to the coupling of different fibre modes, which have different propagation wave-vectors, by the particles. Here, we study one dimensional longitudinal optical binding interactions of chains of 3 μm polystyrene spheres under the influence of the evanescent fields of a two-mode microfibre. The observation of long-range interactions, self-ordering and speed variation of particle chains reveals strong optical binding effects between the particles that can be modelled well by a tritter scattering-matrix approach. The optical forces, optical binding interactions and the velocity of bounded particle chains are calculated using this method. Results show good agreement with finite element numerical simulations. Experimental data and theoretical analysis show that higher order modes in a microfibre offer a promising method to not only obtain stable, multiple particle trapping or faster particle propulsion speeds, but that they also allow for better control over each individual trapped object in particle ensembles near the microfibre surface.

Evanescent field trapping of nanoparticles using nanostructured ultrathin optical fibers

While conventional optical trapping techniques can trap objects with submicron dimensions, the underlying limits imposed by the diffraction of light generally restrict their use to larger or higher refractive index particles. As the index and diameter decrease, the trapping difficulty rapidly increases; hence, the power requirements for stable trapping become so large as to quickly denature the trapped objects in such diffraction-limited systems. Here, we present an evanescent field-based device capable of confining low index nanoscale particles using modest optical powers as low as 1.2 mW, with additional applications in the field of cold atom trapping. Our experiment uses a nanostructured optical micro-nanofiber to trap 200 nm, low index contrast, fluorescent particles within the structured region, thereby overcoming diffraction limitations. We analyze the trapping potential of this device both experimentally and theoretically, and show how strong optical traps are achieved with low input powers.

Degenerate four-wave mixing in a silica hollow bottle-like microresonator

A hollow, bottle-like microresonator (BLMR) was fabricated from a microcapillary with a nearly parabolic profile. From simulations at 1.55 μm the fundamental bottle mode is shown to be in the anomalous dispersion regime, while the conventional whispering gallery mode, confined to the center of the BLMR, is in the normal dispersion regime. Therefore, we have experimentally shown that, for a BLMR with a diameter of 102 um, degenerate four-wave mixing can only be observed by judicious selection of the tapered fiber coupling position. Dispersion tuning in such a system is also briefly discussed theoretically. BLMRs are promising devices for the implementation of sparsely distributed, widely spanned frequency combs at the telecommunications C-band.

Monitoring techniques for the manufacture of tapered optical fibers

The use of a range of optical techniques to monitor the process of fabricating optical fiber tapers is investigated. Thermal imaging was used to optimize the alignment of the optical system; the transmission spectrum of the fiber was monitored to confirm that the tapers had the required optical properties and the strain induced in the fiber during tapering was monitored using in-line optical fiber Bragg gratings. Tapers were fabricated with diameters down to 5 μm and with waist lengths of 20 mm using single-mode SMF-28 fiber.

Diameter measurement of optical nanofibers using a composite photonic crystal cavity

We demonstrate a method for making precise measurements of the diameter of a tapered optical fiber with a sub-wavelength diameter waist (an optical nanofiber). The essence of the method is to create a composite photonic crystal cavity by mounting a defect-mode grating on an optical nanofiber. The resultant cavity has a resonance wavelength that is sensitive to the nanofiber's diameter, allowing the diameter to be inferred from optical measurements. This method offers a precise, nondestructive, and in situ way to characterize the nanofiber diameter.

Higher order microfibre modes for dielectric particle trapping and propulsion

Optical manipulation in the vicinity of optical micro- and nanofibres has shown potential across several fields in recent years, including microparticle control, and cold atom probing and trapping. To date, most work has focussed on the propagation of the fundamental mode through the fibre. However, along the maximum mode intensity axis, higher order modes have a longer evanescent field extension and larger field amplitude at the fibre waist compared to the fundamental mode, opening up new possibilities for optical manipulation and particle trapping. We demonstrate a microfibre/optical tweezers compact system for trapping and propelling dielectric particles based on the excitation of the first group of higher order modes at the fibre waist. Speed enhancement of polystyrene particle propulsion was observed for the higher order modes compared to the fundamental mode for particles ranging from 1 μm to 5 μm in diameter. The optical propelling velocity of a single, 3 μm polystyrene particle was found to be 8 times faster under the higher order mode than the fundamental mode field for a waist power of 25 mW. Experimental data are supported by theoretical calculations. This work can be extended to trapping and manipulation of laser-cooled atoms with potential for quantum networks.

Detecting atoms trapped in an optical lattice using a tapered optical nanofiber

Optical detection of structures with dimensions smaller than an optical wavelength requires devices that work on scales beyond the diffraction limit. Here we present the possibility of using a tapered optical nanofiber as a detector to resolve individual atoms trapped in an optical lattice in the Mott insulator phase. We show that the small size of the fiber combined with an enhanced photon collection rate can allow for the attainment of large and reliable measurement signals.