Quantum dot thermometry at ultra-low temperature in a dilution refrigerator with a 4He immersion cell

Suppression of ambient temperature-caused drift in a laser power stabilization system with a liquid crystal variable retarder in atomic gyroscopes

Laser power stabilization systems with liquid crystal variable retarders have been employed in miniaturized atomic gyroscopes for the merits of low power consumption and easy integration. However, the long-term power drift of the system output with ambient temperature significantly decreases the long-term performance of atomic gyroscopes. Here, we demonstrated a method of dynamic closed-loop control based on the combination of optical power drift and ambient temperature modeling. For a continuous 45 min operation within an ambient temperature variation range of 23.7-25.3 °C, the relative Allan deviation of the output optical power was decreased by one order of magnitude from 2.29 × 10^-4 to 3.35 × 10^-5 after 100 s averaging time. The long-term stability of the system was significantly improved. In addition, the scheme requires no additional thermal control device, preventing the introduction of extra electromagnetic interference, which is desirable in a miniaturized atomic gyroscope.

Spin-Selective Equilibration among Integer Quantum Hall Edge Channels

The equilibration between quantum Hall edge modes is known to depend on the disorder potential and the steepness of the edge. Modern samples with higher mobilities and setups with lower electron temperatures call for a further exploration of the topic. We develop a framework to systematically measure and analyze the equilibration of many (up to 8) integer edge modes. Our results show that spin-selective coupling dominates even for non-neighboring channels with parallel spin. Changes in magnetic field and bulk density let us control the equilibration until it is almost completely suppressed and dominated only by individual microscopic scatterers. This method could serve as a guideline to investigate and design improved devices, and to study fractional and other exotic states.

Cooling low-dimensional electron systems into the microkelvin regime

Two-dimensional electron gases (2DEGs) with high mobility, engineered in semiconductor heterostructures host a variety of ordered phases arising from strong correlations, which emerge at sufficiently low temperatures. The 2DEG can be further controlled by surface gates to create quasi-one dimensional systems, with potential spintronic applications. Here we address the long-standing challenge of cooling such electrons to below 1 mK, potentially important for identification of topological phases and spin correlated states. The 2DEG device was immersed in liquid ³He, cooled by the nuclear adiabatic demagnetization of copper. The temperature of the 2D electrons was inferred from the electronic noise in a gold wire, connected to the 2DEG by a metallic ohmic contact. With effective screening and filtering, we demonstrate a temperature of 0.9 ± 0.1 mK, with scope for significant further improvement. This platform is a key technological step, paving the way to observing new quantum phenomena, and developing new generations of nanoelectronic devices exploiting correlated electron states.

Cooling electrons into the microkelvin temperature range is of interest both for practical purposes and fundamental studies, but current demonstrations are limited to small, specific devices. Here, the authors achieve sub-millikelvin temperatures in a large-area, two-dimensional electron gas.

Progress in Cooling Nanoelectronic Devices to Ultra-Low Temperatures

Here we review recent progress in cooling micro-/nanoelectronic devices significantly below 10 mK. A number of groups worldwide are working to produce sub-millikelvin on-chip electron temperatures, motivated by the possibility of observing new physical effects and improving the performance of quantum technologies, sensors and metrological standards. The challenge is a longstanding one, with the lowest reported on-chip electron temperature having remained around 4 mK for more than 15 years. This is despite the fact that microkelvin temperatures have been accessible in bulk materials since the mid-twentieth century. In this review, we describe progress made in the last 5 years using new cooling techniques. Developments have been driven by improvements in the understanding of nanoscale physics, material properties and heat flow in electronic devices at ultralow temperatures and have involved collaboration between universities and institutes, physicists and engineers. We hope that this review will serve as a summary of the current state of the art and provide a roadmap for future developments. We focus on techniques that have shown, in experiment, the potential to reach sub-millikelvin electron temperatures. In particular, we focus on on-chip demagnetisation refrigeration. Multiple groups have used this technique to reach temperatures around 1 mK, with a current lowest temperature below 0.5 mK.