Interaction of ZnO nanorods with plasmonic metal nanoparticles and semiconductor quantum dots

Surface Modification of ZnO Nanotubes by Ag and Au Coatings of Variable Thickness: Systematic Analysis of the Factors Leading to UV Light Emission Enhancement

Surface modification by plasmonic metals is one of the most promising ways to increase the band-to-band excitonic recombination in zinc oxide (ZnO) nanostructures. However, the metal-induced modulation of the UV light emission depends strongly on the production method, making it difficult to recognize the mechanism responsible for charge/energy transfer between the semiconductor and a metal. Therefore, in this study, the ZnO/Ag and Au hybrids were produced by the same, fully controlled experimental approach. ZnO nanotubes (NTs), fabricated by a template-assisted ALD synthesis, were coated by metals of variable mass thickness (1-6.5 nm thick) using the electron beam PVD technique. The deposited Ag and Au metals grew in the form of island films made of metallic nanoparticles (NPs). The size of the NPs and their size distribution decreased, while the spacing between the NPs increased as the mass of the deposited Ag and Au metals decreased. Systematic optical analysis allowed us to unravel a specific role of surface defects in ZnO NTs in the processes occurring at the ZnO/metal interface. The enhancement of the UV emission was observed only in the ZnO/Ag system. The phenomena were tentatively ascribed to the coupling between the defect-related (DL) excitonic recombination in ZnO and the localized surface plasmon resonance (LSPR) at the Ag NPs. However, the enhancement of UV light was observed only for a narrow range of Ag NP dimensions, indicating the great importance of the size and internanoparticle spacing in the plasmonic coupling. Moreover, the enhancement factors were much stronger in ZnO NTs characterized by robust DL-related emission before metal deposition. In contrast to Ag, Au coatings caused quenching of the UV emission from ZnO NTs, which was attributed to the uncoupling between the DL and LSP energies in this system and a possible formation of the ohmic contact between the Au metal and the ZnO.

Leveraging plasmonic hot electrons to quench defect emission in metal-semiconductor nanostructured hybrids

Modeling light-matter interactions in hybrid plasmonic materials is vital to their widening relevance from optoelectronics to photocatalysis. Here, we explore photoluminescence (PL) from ZnO nanorods (ZNRs) embedded with gold nanoparticles (Au NPs). A progressive increase in Au NP concentration introduces significant structural disorder and defects in ZNRs, which paradoxically quenches defect related visible PL while intensifying the near band edge (NBE) emission. Under UV excitation, the simulated semi-classical model realizes PL from ZnO with sub-bandgap defect states, eliciting visible emissions that are absorbed by Au NPs to generate a non-equilibrium hot carrier distribution. The photo-stimulated hot carriers, transferred to ZnO, substantially modify its steady-state luminescence, reducing NBE emission lifetime and altering the abundance of ionized defect states, finally reducing visible emission. The simulations show that the change in the interfacial band bending at the Au-ZnO interface under optical illumination facilitates charge transfer between the components. This work provides a general foundation to observe and model the hot carrier dynamics and strong light-matter interactions in hybrid plasmonic systems.

Imaging with Raman photons: a novel use of mixed-mode spectroscopy

Surface enhanced Raman spectroscopy is today an established technique used for chemical fingerprinting. Here, we showcase an engineered hierarchical substrate, in which the plasmonically active regions, restricted to a micron scale, two dimensional hexagonal pattern are examined. Spatial variation of the enhanced Raman signal from any analyte, uniformly coating the substrate, consequently bears a high registry with the underlying pattern. This spatially contrasted enhancement allows optical imaging of the 2D pattern solely using the Raman scattered photons from the analyte. While the pattern brightness and contrast determine analyte identification and detection sensitivity, hyperspectral imaging can be exploited for increasing specificity. Proof of concept demonstration of the technique is carried out via the acquisition of Raman images with rhodamine and fluorescein dyes and then applied to detect glucose in 40 mM concentration. The large area optical imaging and the requirement of long-range uniformity in the detected patterns for positive analyte detection, is implemented using a machine learning based pattern recognition protocol which also increases the statistical confidence of detection. This simultaneous, large area signal detection sacrifices continuous spectral information at the cost of speed, reproducibility and minimising human error via automation of detection in the hyperspectral imaging technique presented here.

Resonant defect recombination-localized surface plasmon energy transfer and exciton dominated fluorescence in ZnO-Au-ZnO multi-interfaced heteronanocrystals

The semiconductor-metal heteronanocrystals (HNCs) that possess a perfect epitaxial interface can accommodate novel and interesting physical phenomena owing to the strong interaction and coupling between the semiconductor excitons and metal plasmons at the interface. Here, we fabricate the pyramidal ZnO-Au HNCs and study their unique photophysical properties. Several Au nanospheres are perfectly epitaxially bound with a single ZnO nanocrystal owing to the small lattice mismatch between them and there are also ZnO-Au-ZnO sandwiched HNCs. There is strong coupling between the green defect-associated recombination in the ZnO nanocrystal and the localized surface plasmon resonance (LSPR) of the Au nanoshpere at the interface of the HNC. This leads to resonant defect recombination-LSPR energy transfer and resultant nearly complete quenching of the green defect luminescence of the ZnO NCs in the HNCs, leaving only the UV exciton luminescence. The lifetimes of both the green and UV emission bands decrease significantly in the ZnO-Au HNCs relative to that of the pure ZnO nanocrystals owing to the combined effect of resonance energy transfer and surface plasmon enhanced radiative transition. The exponent of the luminescence intensity-excitation intensity power function for the green emission band is remarkably smaller than unity and this suggests that the involved defects have an intermediate concentration.

Special topic on emerging directions in plasmonics

Plasmonics enables a wealth of applications, including photocatalysis, photoelectrochemistry, photothermal heating, optoelectronic devices, and biological and chemical sensing, while encompassing a broad range of materials, including coinage metals, doped semiconductors, metamaterials, 2D materials, bioconjugates, and chiral assemblies. Applications in plasmonics benefit from the large local electromagnetic field enhancements generated by plasmon excitation, as well as the products of plasmon decay, including photons, hot charge carriers, and heat. This special topic highlights recent work in both theory and experiment that advance our fundamental understanding of plasmon excitation and decay mechanisms, showcase new applications enabled by plasmon excitation, and highlight emerging classes of materials that support plasmon excitation.