An integrated ultra-high vacuum apparatus for growth and in situ characterization of complex materials

Unraveling the optoelectronic properties of CoSbx intrinsic selective solar absorber towards high-temperature surfaces

The combination of the ability to absorb most of the solar radiation and simultaneously suppress infrared re-radiation allows selective solar absorbers (SSAs) to maximize solar energy to heat conversion, which is critical to several advanced applications. The intrinsic spectral selective materials are rare in nature and only a few demonstrated complete solar absorption. Typically, intrinsic materials exhibit high performances when integrated into complex multilayered solar absorber systems due to their limited spectral selectivity and solar absorption. In this study, we propose CoSbx (2 < x < 3) as a new exceptionally efficient SSA. Here we demonstrate that the low bandgap nature of CoSbx endows broadband solar absorption (0.96) over the solar spectral range and simultaneous low emissivity (0.18) in the mid-infrared region, resulting in a remarkable intrinsic spectral solar selectivity of 5.3. Under 1 sun illumination, the heat concentrates on the surface of the CoSbx thin film, and an impressive temperature of 101.7 °C is reached, demonstrating the highest value among reported intrinsic SSAs. Furthermore, the CoSbx was tested for solar water evaporation achieving an evaporation rate of 1.4 kg m-2 h-1. This study could expand the use of narrow bandgap semiconductors as efficient intrinsic SSAs with high surface temperatures in solar applications.

Multidetection scheme for transient-grating-based spectroscopy

Time-resolved optical spectroscopy represents an effective non-invasive approach to investigate the interplay of different degrees of freedom, which plays a key role in the development of novel functional materials. Here, we present magneto-acoustic data on Ni thin films on SiO₂ as obtained by a versatile pump-probe setup that combines transient grating spectroscopy with time-resolved magnetic polarimetry. The possibility to easily switch from a pulsed to continuous wave probe allows probing of acoustic and magnetization dynamics on a broad time scale, in both transmission and reflection geometry.

Electronic Properties of Fully Strained La1-x Sr x MnO3 Thin Films Grown by Molecular Beam Epitaxy (0.15 ≤ x ≤ 0.45)

The structural, electronic, and magnetic properties of Sr-hole-doped epitaxial La_1-x Sr _x MnO₃ (0.15 ≤ x ≤ 0.45) thin films deposited using the molecular beam epitaxy technique on 4° vicinal STO (001) substrates are probed by the combination of X-ray diffraction and various synchrotron-based spectroscopy techniques. The structural characterizations evidence a significant shift in the LSMO (002) peak to the higher diffraction angles owing to the increase in Sr doping concentrations in thin films. The nature of the LSMO Mn mixed-valence state was estimated from X-ray photoemission spectroscopy together with the relative changes in the Mn L_2,3 edges observed in X-ray absorption spectroscopy (XAS), both strongly affected by doping. CTM4XAS simulations at the XAS Mn L_2,3 edges reveal the combination of epitaxial strain, and different MnO₆ crystal field splitting give rise to a peak at ∼641 eV. The observed changes in the occupancy of the e_g and the t_2g orbitals as well as their binding energy positions toward the Fermi level with hole doping are discussed. The room-temperature magnetic properties were probed at the end by circular dichroism.

A UHV MOKE magnetometer complementing XMCD-PEEM at the Elettra Synchrotron

We report on a custom-built UHV-compatible Magneto-Optical Kerr Effect (MOKE) magnetometer for applications in surface and materials sciences, operating in tandem with the PhotoEmission Electron Microscope (PEEM) endstation at the Nanospectroscopy beamline of the Elettra synchrotron. The magnetometer features a liquid-nitrogen-cooled electromagnet that is fully compatible with UHV operation and produces magnetic fields up to about 140 mT at the sample. Longitudinal and polar MOKE measurement geometries are realized. The magneto-optical detection is based on polarization analysis using a photoelastic modulator. The sample manipulation system is fully compatible with that of the PEEM, making it possible to exchange samples with the beamline endstation, where complementary X-ray imaging and spectroscopy techniques are available. The magnetometer performance is illustrated by experiments on cobalt ultra-thin films, demonstrating close to monolayer sensitivity. The advantages of combining in situ growth, X-ray Magnetic Circular Dichroism imaging (XMCD-PEEM) and MOKE magnetometry into a versatile multitechnique facility are highlighted.

In situ electromagnet with active cooling for real-time magneto-optic Kerr effect spectroscopy

We present a compact in situ electromagnet with an active cooling system for use in ultrahigh vacuum environments. The active cooling enhances the thermal stability and increases the electric current that can be applied through the coil, promoting the generation of homogeneous magnetic fields, required for applications in real-time deposition experiments. The electromagnet has been integrated into a reflectance difference magneto-optic Kerr effect (RD-MOKE) spectroscopy system that allows the synchronous measurement of the optical anisotropy and the magneto-optic response in polar MOKE geometry. Proof of principle studies have been performed in real time during the deposition of ultra-thin Ni films on Cu(110)-(2 × 1)O surfaces, corroborating the extremely sharp spin reorientation transition above a critical coverage of 9 monolayers and demonstrating the potential of the applied setup for real-time and in situ investigations of magnetic thin films and interfaces.