Development of a dose-rate dosimeter for x-ray CT scanner using silicon x-ray diode

Silver nanocluster-based ratiometric fluorescence sensors for X-ray dose detection

In this paper, we synthesized silver nanoclusters using bovine serum albumin (BSA) as a template (BSA@AgNCs). Then, we anchored hydroxyphenyl fluorescein (HPF) to yield HPF-BSA@AgNCs. When exposed to X-rays, hydroxyl (∙OH) radicals generated by radiolysis of water react with HPF to produce fluorescein, which emits enhanced fluorescence at 515 nm (λex = 480 nm). The fluorescence intensity of BSA@AgNCs at 685 nm (λex = 480 nm) remains stable when exposed to X-rays. This HPF-BSA@AgNCs ratiometric fluorescence sensor can rapidly detect 0.1-20 Gy (the energy deposited per unit mass, J/kg) of X-rays. In addition, HPF-BSA@AgNCs exhibit good durability and temperature stability. Finally, HPF-BSA@AgNCs were used to measure the absorbed doses of A549 cells and evaluate the cell irradiation damage.

Development of a dose-rate dosimeter using a silicon photodiode for a medical linear accelerator in a 10 MV flattening filter-free mode

This study was aimed at developing a dose-rate dosimeter to measure the instantaneous dose rate of a commercially available medical linear accelerator. A dose-rate dosimeter composed of a silicon photodiode (Si-PD), a complementary metal-oxide semiconductor single operational amplifier, a resistor of 20 MΩ, a capacitor of 100 pF, and a mini-substrate measuring 16 × 16 mm2 was evaluated. Voltage outputs from the proposed dosimeter were measured using an analog-to-digital converter on a microcomputer. A custom-made x-ray tube generator at an energy of 120 kV with a tube current ranging from 0.1 to 2.0 mA was used for the dose-rate calibration. Dose-rate calibration was performed 83.3 mm from an x-ray source using a commercially available semiconductor dosimeter. The developed Si-PD dosimeter could measure up to 0.6 Gy/s at a distance of 19.3 mm from the x-ray source. Measurements were also performed using a medical linear accelerator in a 10 MV flattening filter-free mode at depths of 0, 25, 50, and 100 mm with an irradiation field of 100 × 100 mm2 at a constant distance of 1000 mm from the source to the dosimeter. A peak voltage variation corresponding to the instantaneous dose rate was observed using a sampling period of 1.0 ms, and the peak voltages decreased with the depth. The detected pulse numbers were 512, 484, 491, and 511 at depths of 0, 25, 50, and 100 mm, respectively.

Characterization of an under-development capacitor dosimeter equipped with a silicon x-ray diode

Herein, we evaluated a capacitor dosimeter under development by a manufacturer, which is designed to monitor the entrance dose in x-ray diagnosis and comprises a silicon x-ray diode (Si-XD), a 0.1 µF capacitor, and a dosimeter dock. The Si-XD is a high-sensitivity photodiode optimized for x-ray detection. The dosimeter was charged to 3.30 V using the dock before x-ray irradiation. The charging voltage was reduced by photocurrents flowing through the Si-XD during irradiation, and the discharging voltage was measured. For the fundamental characterization of this capacitor dosimeter, we investigated the x-ray tube-current and tube-voltage dependences of the measured dose using an industrial x-ray tube; the angular dependence was also investigated. A commercially available semiconductor dosimeter (RaySafe ThinX) was used for dose calibration. The doses were proportional to the tube current at a constant tube voltage of 100 kV and increased with increasing tube voltage at a constant tube current of 1.0 mA. The dose difference with respect to the commercially available semiconductor dosimeter was within 1.0% when the tube current was varied and it was within 3.0% when the tube voltage was varied. In the angular dependence measurement, a difference of up to 6.0% was observed as the angle varied from 0° to 355° in steps of 5°. The dose-calibration results indicated that the determination of the initial charging voltage was important for dose conversion using the capacitor dosimeter.