Risk assessment of COVID infection by respiratory droplets from cough for various ventilation scenarios inside an elevator: An OpenFOAM-based computational fluid dynamics analysis

Insights into the fluid dynamics of bioaerosol formation in a model respiratory tract

Bioaerosols produced within the respiratory system play an important role in respiratory disease transmission. These include infectious diseases such as common cold, influenza, tuberculosis, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) among several others. It is, therefore, of immense interest to understand how bioaerosols are produced within the respiratory system. This has not been extensively investigated. The present study computationally investigates how bioaerosols are produced in a model respiratory tract due to hydrodynamic interactions between breathed air and a thin mucus layer, which lines the inner surface of the tract. It is observed that Kelvin-Helmholtz instability is established in the thin mucus layer due to associated fluid dynamics. This induces interfacial surface waves which fragment forming bioaerosols under certain conditions. A regime map is created-based on pertinent dimensionless parameters-to enable identification of such conditions. Analysis indicates that bioaerosols may be produced even under normal breathing conditions, contrary to expectations, depending on mucus rheology and thickness of the mucus layer. This is possible during medical conditions as well as during some treatment protocols. However, such bioaerosols are observed to be larger ( ∼ O ( 100 ) μ m) and are produced in less numbers ( ∼ 100 ), as compared to those produced under coughing conditions. Treatment protocols and therapeutic strategies may be suitably devised based on these findings.

Airborne virus transmission: Increased spreading due to formation of hollow particles

The globally supported social distancing rules to prevent airborne transmission of COVID-19 assume small saliva droplets evaporate fast and large ones, which contain most viral copies, fall fast to the ground. However, during evaporation, solutes distribute non-uniformly within the droplets. We developed a numerical model to predict saliva droplet drying in different environments. We represent saliva droplets as a solution of NaCl mixed with water. In a hot and dry ambiance, the solutes form a shell on the droplets' surface, producing light, hollow particles. These hollow particles have a larger cross-sectional area compared to their solid counterparts and can float longer and travel farther in the air. We introduced the "hollowness factor," which serves as a measure of the ratio of the volume of a hollow particle and the volume of a solid residue formed during droplet drying. Through our investigations, we determined that under specific conditions, namely an ambient humidity level of 10% and a temperature of 40°C, the highest hollowness factor observed was 1.610. This finding indicates that in the case of hollow particle formation, the droplet nucleus expands by a factor of 1.610 compared to its original size.

Large eddy simulation of sneeze plumes and particles in a poorly ventilated outdoor air condition: A case study of the University of Houston main campus

Since the outbreak of the COVID-19 pandemic, many previous studies using computational fluid dynamics (CFD) have focused on the dynamics of air masses, which are believed to be the carriers of respiratory diseases, in enclosed indoor environments. Although outdoor air may seem to provide smaller exposure risks, it may not necessarily offer adequate ventilation that varies with different micro-climate settings. To comprehensively assess the fluid dynamics in outdoor environments and the efficiency of outdoor ventilation, we simulated the outdoor transmission of a sneeze plume in "hot spots" or areas in which the air is not quickly ventilated. We began by simulating the airflow over buildings at the University of Houston using an OpenFOAM computational fluid dynamics solver that utilized the 2019 seasonal atmospheric velocity profile from an on-site station. Next, we calculated the length of time an existing fluid is replaced by new fresh air in the domain by defining a new variable and selecting the hot spots. Finally, we conducted a large-eddy simulation of a sneeze in outdoor conditions and then simulated a sneeze plume and particles in a hot spot. The results show that fresh incoming air takes as long as 1000 s to ventilate the hot spot area in some specific regions on campus. We also found that even the slightest upward wind causes a sneeze plume to dissipate almost instantaneously at lower elevations. However, downward wind provides a stable condition for the plume, and forward wind can carry a plume even beyond six feet, the recommended social distance for preventing infection. Additionally, the simulation of sneeze droplets shows that the majority of the particles adhered to the ground or body immediately, and airborne particles can be transported more than six feet, even in a minimal amount of ambient air.

Transmission and infection risk of COVID-19 when people coughing in an elevator

People in cities use elevators daily. With the COVID-19 pandemic, there are more worries about elevator safety, since elevators are often small and crowded. This study used a proven CFD model to see how the virus could spread in elevators. We simulated five people taking in an elevator for 2 min and analyzed the effect of different factors on the amount of virus that could be inhaled, such as the infected person's location, the standing positions of the persons, and the air flow rate. We found that the position of the infected person and the direction they stood greatly impacted virus transmission in the elevator. The use of mechanical ventilation with a flow rate of 30 ACH (air changes per hour) was effective in reducing the risk of infection. In situations where the air flow rate was 3 ACH, we found that the highest number of inhaled virus copies could range from 237 to 1186. However, with a flow rate of 30 ACH, the highest number was reduced to 153 to 509. The study also showed that wearing surgical masks decreased the highest number of inhaled virus copies to 74 to 155.

Effectiveness of N95 Mask in Preventing COVID-19 Transmission

N95 mask has emerged as a potential measure to mitigate the airborne transmission of respiratory disease such as COVID-19. Herein, we experimentally investigated the impact and interaction of pure water droplets as surrogate to respiratory droplets with the different layers of a commercially available N95 mask to demonstrate the penetration and passage-capability of respiratory fluids through the different layers. The penetration of an impacting droplet through the mask layers was characterized by elucidating the ejection of secondary droplets from the rear-side surface of the target mask material. In addition, the passage of respiratory fluids through the mask layers was characterized by capillary imbibition of the droplet liquid through the pores, as a function of wettability of the mask material. Droplet impact at Weber numbers We = 208 and 416 has been considered in the present study; the chosen We range corresponds to that of cough droplets realized in real respiratory events. Each layer of the N95 mask is hydrophobic that prevents capillary imbibition through the pores: a sessile droplet placed over the surface exhibits classical diffusion-limited evaporation. Droplet impact experiments on N95 mask layer surfaces reveal that a single layer allows liquid penetration at We = 416; while a combination of five layers, as is the case of a commercially available N95 mask, blocks the penetration completely, consistent with the widely known effectiveness of N95 masks. Herein, we devote special attention to compare the so-obtained efficiency of N95 masks to that of a recently designed two-layer cloth mask containing an intermediate High-Efficiency Particulate Air (HEPA) filter layer (Narayan et al. in Phys Fluids 34:061703, 2022). We conclusively show that the performance of the designed cloth mask is identical to that of a commercially available N95 mask. The assessment of mask effectiveness further includes examination of breathability and comfort by means of passage of air through them. A comparative study has been presented herein for a clear demonstration of effectiveness of different masks in preventing air-borne transmission of COVID-19.

A Numerical Investigation into the Spread Characteristics of a Human Virus-Carrying Droplet in a Classroom Environment

In public health, the transmission characteristics and laws of highly infectious virus-carrying particles in the air environment have become a hot topic. The study on the spread characteristics of human virus-carrying droplets in a typical densely populated space is necessary. As such, a classroom space lattice Boltzmann method (LBM) model with a dense population is established to simulate and analyze the spreading and diffusing behavior of pathogenic droplets. The results show that the dispersion density is mainly affected by the mainstream wind direction in the area of concern, and particle aggregation is more likely to form in the area close to the wind disturbance. Due to the dense thermal plumes, the droplet movement is a clear convergence towards the upper space of the classroom. This could explain the fact that people living above confirmed cases are now more likely to be infected.

Characteristics of collection and inactivation of virus in air flowing inside a winding conduit equipped with 280 nm deep UV-LEDs

A general-purpose virus inactivation unit that can inactivate viruses was developed using deep ultraviolet (DUV) LEDs that emit DUV rays with a wavelength of 280 nm. The inside of the virus inactivation unit is a rectangular conduit with a sharp turn of 180° (sharp-turned rectangular conduit). Virus inactivation is attempted by directly irradiating the air passing through the conduit with DUV rays. The flow characteristics of air and virus particles inside the virus inactivation unit were investigated using numerical simulations. The air was locally accelerated at the sharp turn parts and flowed along the partition plate in the sharp-turned rectangular conduit. The aerosol particles moving in the sharp-turned rectangular conduit were greatly bent in orbit at the sharp turn parts, and then rapidly approached the partition plate at the lower part of the conduit. Consequently, many particles collided with the partition plates behind the sharp-turn parts. SARS-CoV-2 virus was nebulized in the virus inactivation unit, and the RNA concentration and virus inactivation rate with and without the emission of DUV-LEDs were measured in the experiment. The concentration of SARS-CoV-2 RNA was reduced to 60% through DUV-LED irradiation. In addition, SARS-CoV-2 passing through the virus inactivation unit was inactivated below the detection limit by the emission of DUV-LEDs. The virus inactivation rate and the value of the detection limit corresponded to 99.38% and 35.36 TCID₅₀/mL, respectively.

The effect of relative air humidity on the evaporation timescales of a human sneeze

The present paper investigates droplet and aerosol emission from the human respiratory function by numerical and experimental methods, which is analyzed at the worst-case scenario, a violent sneeze without a face covering. The research findings develop the understanding of airborne disease transmission relevant to COVID-19, its recent variants, and other airborne pathogens. A human sneeze is studied using a multiphase Computational Fluid Dynamics (CFD) model using detached eddy simulation coupled to the emission of droplets that break up, evaporate, and disperse. The model provides one of the first experimental benchmarks of CFD predictions of a human sneeze event. The experiments optically capture aerosols and droplets and are processed to provide spatiotemporal data to validate the CFD model. Under the context of large random uncertainty, the studies indicate the reasonable correlation of CFD prediction with experimental measurements using velocity profiles and exposure levels, indicating that the model captures the salient details relevant to pathogen dispersion. Second, the CFD model was extended to study the effect of relative humidity with respect to the Wells curve, providing additional insight into the complexities of evaporation and sedimentation characteristics in the context of turbulent and elevated humidity conditions associated with the sneeze. The CFD results indicated correlation with the Wells curve with additional insight into features, leading to non-conservative aspects associated with increased suspension time. These factors are found to be associated with the combination of evaporation and fluid-structure-induced suspension. This effect is studied for various ambient air humidity levels and peaks for lower humidity levels, indicating that the Wells curve may need a buffer in dry climates. Specifically, we find that the increased risk in dry climates may be up to 50% higher than would be predicted using the underlying assumptions in Wells' model.

A short review of vapour droplet dispersion models used in CFD to study the airborne spread of COVID19

The use of computational fluid dynamics (CFD) to simulate the spread of COVID19 and many other airborne diseases, especially in an indoor environment needs accurate understanding of dispersion models. Modelling the transport/dispersion of vapour droplets within the atmosphere is a complex problem, as it involves the motion of more than one phase, as well as the interphase interactions between the phases. This paper reviews the current canon of research on dispersion modelling of vapour droplets by looking at three specific aspects: (i) physical definition/specification of the initial droplet size distribution; (ii) physics of evaporation/condensation models and (iii) transport equations (with molecular/turbulent dispersion models) to describe the movement of the vapour droplets as they propagate through the air. This review found that the state of modelling implements a wide range of models which shows variances in results thus leading to a state where it is difficult to know which model is most accurate. The authors suggest that further studies in this direction should focus on developing a principle set of equations by benchmarking the previously developed models to establish model uncertainty of the previously developed models with reference to a fixed theoretical model and be compared under identical conditions. However, it must be noted that due to the complex nature of microdroplet evaporation and dispersion coupled with the unpredictable way droplet size distributions are produced, current experimental methodologies that are available to validate such simulations, such as particle image velocimetry, are still not robust enough to provide detailed data to verify minute aspects of the simulations.