Head area measurements of dead, live, X- and Y-bearing bovine spermatozoa

In Vitro Gene Conservation Status and the Quality of the Genetic Resources of Native Hungarian Sheep Breeds

Studies revealed a global loss of genetic resources for local sheep breeds. Therefore, the current study aimed to introduce and highlight the progress made on Hungary's existing gene conservation program (small Gene Bank). Furthermore, we evaluated breed (Tsigai, Cikta, and Racka), season, and individual variabilities (n = 24) of the pre-freeze and post-thaw semen stored in the Gene Bank to enhance the gene conservation of the breeds. The samples were cryopreserved manually, and post-thaw spermatozoa were analyzed for motility (CASA), viability, chromatin structure, and morphometry of the sperm nuclei. Ejaculate volume, spermatozoa concentration, subjective motility and standard motility, kinematic parameters, and spermatozoa's head area standard deviation of the post-thaw samples differed significantly among breeds (p < 0.05). Season affected ejaculate volume, total spermatozoa number/ejaculate, STR, BCF, and ALH. We observed a significant (p < 0.001; 0.05) breed and season interaction on concentration, total spermatozoa number/ejaculate, VCL, LIN, WOB, spermatozoa's head average perimeter and nucleus length (Tsigai and Cikta differed but were statistically the same as Racka). Similarly, season significantly (p < 0.05) affected the proportion of ejaculate suitable for freezing. There was a significant (p < 0.05) difference in kinematic parameters and viability among the rams across the breeds. The spermatozoa's head morphometry of the Tsigai and Cikta breeds differed significantly (p < 0.05) among the rams. There were individual and breed differences in many spermatozoa quality parameters. The stored samples are of good quality, with more than 40% having intact membranes and low abnormal chromatin condensation.

Biochemical Features of X or Y Chromosome-Bearing Spermatozoa for Sperm Sexing

This review presents information on biochemical features of spermatozoa bearing X or Y chromosome, enabling production of a sperm fraction with pre-defined sex chromosome. The almost only technology currently used for such separation (called sexing) is based on the fluorescence-activated cell sorting of sperm depending on DNA content. In addition to the applied aspects, this technology made it possible to analyze properties of the isolated populations of spermatozoa bearing X or Y chromosome. In recent years, existence of the differences between these populations at the transcriptome and proteome level have been reported in a number of studies. It is noteworthy that these differences are primarily related to the energy metabolism and flagellar structural proteins. New methods of sperm enrichment with X or Y chromosome cells are based on the differences in motility between the spermatozoa with different sex chromosomes. Sperm sexing is a part of the widespread protocol of artificial insemination of cows with cryopreserved semen, it allows to increase proportion of the offspring with the required sex. In addition, advances in the separation of X and Y spermatozoa may allow this approach to be applied in clinical practice to avoid sex-linked diseases.

Morphometry of Boar Spermatozoa in Semen Stored at 17 °C—The Influence of the Staining Technique

Simple Summary

To obtain satisfactory results in artificial insemination, it is necessary to use high-quality ejaculates for the production of insemination doses and then maintain the biological value of the sperm during storage. Boar spermatozoa, owing to the specific structure of the cell membrane, are particularly sensitive to temperature changes. For this reason, cryopreservation cannot be used in artificial insemination practice, and there may be limitations to successful storage of semen in a liquid state. The practice of using boar semen for artificial insemination does not include analyses of the effect of storage time of boar semen on sperm dimensions. Therefore, the aim of the study was to analyse the morphometry of sperm during storage of liquid boar semen. An attempt was also made to evaluate the suitability of three staining methods for assessment of boar sperm morphometry. The morphometric dimensions of boar sperm were shown to change during storage of liquid semen. These changes affected the sperm head more than the tail and were due to the staining method used. The analyses are very important as they provide more information about the morphometric dimensions of the sperm during preservation of boar semen. The applied sperm staining techniques allows for a more accurate assessment of male reproductive cells.

Abstract

The aim of the study was to assess the morphometry of sperm during storage of liquid boar semen at 17 °C. An attempt was also made to evaluate the suitability of three staining methods for assessment of boar sperm morphometry. The study was carried out on 20 Landrace boars. Semen was collected from the boars every 5 days by the manual method. Four ejaculates from each boar were analysed (80 ejaculates in total). Analyses were performed five times: at 1 h, 24 h, 48 h, 96 h, and 168 h after semen collection. Blisters with insemination doses were opened immediately before the analyses. From each insemination dose, smears were prepared for morphometric evaluation of sperm, which were stained by three methods (eosin-nigrosin—EN, eosin-gentian—EG, and SpermBlue—SB). Morphometric measurements of 15 randomly selected sperm with normal morphology were performed on each slide. The morphometric measurements included the following parameters: sperm head length, width, area, and perimeter; tail length; and total sperm length. The results of the morphometric measurements were used to calculate the head shape index. The morphometric dimensions of the sperm were shown to change during storage of semen at 17 °C. The extent of these changes, however, depended on the staining method used, as the three methods result in different morphometric dimensions of sperm, in the case of both the head and the tail. In the slides stained by the eosin-nigrosin method, the dimensions of the head and tail were smaller at every time of storage than in the slides stained by the SpermBlue and eosin-gentian methods.

Sperm bauplan and function and underlying processes of sperm formation and selection

The spermatozoon is a highly differentiated and polarized cell, with two main structures: the head, containing a haploid nucleus and the acrosomal exocytotic granule, and the flagellum, which generates energy and propels the cell; both structures are connected by the neck. The sperm's main aim is to participate in fertilization, thus activating development. Despite this common bauplan and function, there is an enormous diversity in structure and performance of sperm cells. For example, mammalian spermatozoa may exhibit several head patterns and overall sperm lengths ranging from ∼30 to 350 µm. Mechanisms of transport in the female tract, preparation for fertilization, and recognition of and interaction with the oocyte also show considerable variation. There has been much interest in understanding the origin of this diversity, both in evolutionary terms and in relation to mechanisms underlying sperm differentiation in the testis. Here, relationships between sperm bauplan and function are examined at two levels: first, by analyzing the selective forces that drive changes in sperm structure and physiology to understand the adaptive values of this variation and impact on male reproductive success and second, by examining cellular and molecular mechanisms of sperm formation in the testis that may explain how differentiation can give rise to such a wide array of sperm forms and functions.

Differential Sperm Motility Mediates the Sex Ratio Drive Shaping Mouse Sex Chromosome Evolution

The mouse sex chromosomes exhibit an extraordinary level of copy number amplification of postmeiotically expressed genes [1, 2], driven by an “arms race” (genomic conflict) between the X and Y chromosomes over the control of offspring sex ratio. The sex-linked ampliconic transcriptional regulators Slx and Sly [3, 4, 5, 6, 7] have opposing effects on global transcription levels of the sex chromosomes in haploid spermatids via regulation of postmeiotic sex chromatin (PMSC) [8, 9, 10, 11] and opposing effects on offspring sex ratio. Partial deletions of the Y chromosome (Yq) that reduce Sly copy number lead to global overexpression of sex-linked genes in spermatids and either a distorted sex ratio in favor of females (smaller deletions) or sterility (larger deletions) [12, 13, 14, 15, 16]. Despite a large body of work studying the role of the sex chromosomes in regulating spermatogenesis (recent reviews [17, 18, 19, 20]), most studies do not address differential fertility effects on X- and Y-bearing cells. Hence, in this study, we concentrate on identifying physiological differences between X- and Y-bearing sperm from Yq-deleted males that affect their relative fertilizing ability and consequently lead to sex ratio skewing. We show that X- and Y-bearing sperm in these males have differential motility and morphology but are equally able to penetrate the cumulus and fertilize the egg once at the site of fertilization. The altered motility is thus deduced to be the proximate cause of the skew. This represents the first demonstration of a specific difference in sperm function associated with sex ratio skewing.

•

The sex ratio skew in the offspring of Yq-deleted male mice is abolished by IVF

•

In Yqdel males, Y sperm are more severely morphologically distorted than X sperm

•

Similarly, Y sperm in these males have relatively impaired motility

•

This motility difference explains the sex ratio skew in offspring of these males

Computer-assisted sperm morphometry fluorescence-based analysis has potential to determine progeny sex

This study was designed to determine the ability of computer-assisted sperm morphometry analysis (CASA-Morph) with fluorescence to discriminate between spermatozoa carrying different sex chromosomes from the nuclear morphometrics generated and different statistical procedures in the bovine species. The study was divided into two experiments. The first was to study the morphometric differences between X- and Y-chromosome-bearing spermatozoa (SX and SY, respectively). Spermatozoa from eight bulls were processed to assess simultaneously the sex chromosome by FISH and sperm morphometry by fluorescence-based CASA-Morph. SX cells were larger than SY cells on average (P < 0.001) although with important differences between bulls. A simultaneous evaluation of all the measured features by discriminant analysis revealed that nuclear area and average fluorescence intensity were the variables selected by stepwise discriminant function analysis as the best discriminators between SX and SY. In the second experiment, the sperm nuclear morphometric results from CASA-Morph in nonsexed (mixed SX and SY) and sexed (SX) semen samples from four bulls were compared. FISH allowed a successful classification of spermatozoa according to their sex chromosome content. X-sexed spermatozoa displayed a larger size and fluorescence intensity than nonsexed spermatozoa (P < 0.05). We conclude that the CASA-Morph fluorescence-based method has the potential to find differences between X- and Y-chromosome-bearing spermatozoa in bovine species although more studies are needed to increase the precision of sex determination by this technique.

Comparison of the permeability properties and post-thaw motility of ejaculated and epididymal bovine spermatozoa

There are very few experimental reports on the comparative water transport (membrane permeability) characteristics of ejaculated and epididymal mammalian spermatozoa during freezing. In the present study, we report the effects of cooling ejaculated and epididymal bovine sperm from the same males with and without the presence of a cryoprotective agent, glycerol. Water transport data during freezing of ejaculated and epididymal bovine sperm suspensions were obtained at a cooling rate of 20 degrees C/min under two different conditions: (1) in the absence of any cryoprotective agents, CPAs and, (2) in the presence of 0.7 M glycerol. Using values published in the literature, we modeled the spermatozoa as a cylinder of length 39.8 microm and a radius of 0.4 microm with an osmotically inactive cell volume, V(b), of 0.61 V(o), where V(o) is the isotonic cell volume. The subzero water transport response is analyzed to determine the variables governing the rate of water loss during cooling of bovine spermatozoa, i.e. the membrane permeability parameters (reference membrane permeability, L(pg) and activation energy, E(Lp)). The predicted best-fit permeability parameters ranged from, L(pg)=0.021-0.038 microm/min-atm and E(Lp)=27.8-41.1 kcal/mol. The subzero water transport response and consequently the subzero water transport parameters are not significantly different between the ejaculated and epididymal bovine spermatozoa under corresponding cooling conditions. If this observation is found to be more generally valid for other mammalian species as well, then in the future the sperm extracted from the testes of a postmortem male could be optimally cryopreserved using procedures similar to those derived for ejaculated sperm.

Effect of glycerol and cholesterol-loaded cyclodextrin on freezing-induced water loss in bovine spermatozoa

Recent experimental data show that incubating bovine sperm with cholesterol-loaded cyclodextrin (CLC) before cryopreservation increases the percentages of motile and viable cells recovered after freezing and thawing, compared with control sperm. In the present study, we report the effect of incubating bovine sperm with CLC on the subzero water transport response and the membrane permeability parameters (reference membrane permeability (Lpg) and activation energy (ELp)). Water transport data during freezing of bovine sperm cell suspensions were obtained at a cooling rate of 20 °C/min under three different conditions: 1. in the absence of cryoprotective agents (CPAs); 2. in the presence of 0.7 M glycerol; and 3. in the presence of 1.5 mg/ml CLC and 0.7 M glycerol. With previously published values, the bovine sperm cell was modeled as a cylinder of length 39.8 μm and radius 0.4 μm, with osmotically inactive cell volume (Vb) of 0.61Vo, whereVois the isotonic cell volume. By fitting a model of water transport to the experimentally obtained data, the best-fit water transport parameters (LpgandELp) were determined. The predicted best-fit permeability parameters ranged fromLpg= 0.02 to 0.036 μm/min-atm andELp= 26.4 to 42.1 kcal/mol. These subzero water transport parameters are significantly different from the suprazero membrane permeability values (obtained in the absence of extracellular ice) reported in the literature. Calculations made of the theoretical response of bovine spermatozoa at subzero temperatures suggest that the optimal cooling rate to cryopreserve bovine spermatozoa is 45–60 °C/min, agreeing quite closely with experimentally determined rates of freezing bovine spermatozoa.