Opportunities involving microfluidics and 3D culture systems to the in vitro embryo production

Traditional methods of gamete handling, fertilization, and embryo culture often face limitations in efficiency, consistency, and the ability to closely mimic in vivo conditions. This review explores the opportunities presented by microfluidic and 3D culture systems in overcoming these challenges and enhancing in vitro embryo production. We discuss the basic principles of microfluidics, emphasizing their inherent advantages such as precise control of fluid flow, reduced reagent consumption, and high-throughput capabilities. Furthermore, we delve into microfluidic devices designed for gamete manipulation, in vitro fertilization, and embryo culture, highlighting innovations such as droplet-based microfluidics and on-chip monitoring. Next, we explore the integration of 3D culture systems, including the use of biomimetic scaffolds and organ-on-a-chip platforms, with a particular focus on the oviduct-on-a-chip. Finally, we discuss the potential of these advanced systems to improve embryo production outcomes and advance our understanding of early embryo development. By leveraging the unique capabilities of microfluidics and 3D culture systems, we foresee significant advancements in the efficiency, effectiveness, and clinical success of in vitro embryo production.

Mechanisms regulating the initiation of porcine conceptus elongation

Significant increases in litter size within commercial swine production over the past decades have led to increases in preweaning piglet mortality due to increase within-litter birthweight variation, typically due to mortality of the smallest littermate piglets. Therefore, identifying mechanisms to reduce variation in placental development and subsequent fetal growth are critical to normalizing birthweight variation and improving piglet survivability in high-producing commercial pigs. A major contributing factor to induction of within-litter variation occurs during the peri-implantation period as the pig blastocyst elongates from spherical to filamentous morphology in a short period of time and rapidly begins superficial implantation. During this period, there is significant within-litter variation in the timing and extent of elongation among littermates. As a result, delays and deficiencies in conceptus elongation not only contribute directly to early embryonic mortality, but also influence subsequent within-litter birthweight variation. This study will highlight key aspects of conceptus elongation and provide some recent evidence pertaining to specific mechanisms from -omics studies (i.e., metabolomics of the uterine environment and transcriptomics of the conceptus) that may specifically regulate the initiation of conceptus elongation to identify potential factors to reduce within-litter variation and improve piglet survivability.

Secreted metabolome of porcine blastocysts encapsulated within in vitro 3D alginate hydrogel culture systems undergoing morphological changes provides insights into specific mechanisms involved in the initiation of porcine conceptus elongation

CONTEXT

The exact mechanisms regulating the initiation of porcine conceptus elongation are not known due to the complexity of the uterine environment.

AIMS

To identify contributing factors for initiation of conceptus elongation in vitro , this study evaluated differential metabolite abundance within media following culture of blastocysts within unmodified alginate (ALG) or Arg-Gly-Asp (RGD)-modified alginate hydrogel culture systems.

METHODS

Blastocysts were harvested from pregnant gilts, encapsulated within ALG or RGD or as non-encapsulated control blastocysts (CONT), and cultured. At the termination of 96h culture, media were separated into blastocyst media groups: non-encapsulated control blastocysts (CONT); ALG and RGD blastocysts with no morphological change (ALG- and RGD-); ALG and RGD blastocysts with morphological changes (ALG+ and RGD+) and evaluated for non-targeted metabolomic profiling by liquid chromatography (LC)-mass spectrometry (MS) techniques and gas chromatography-(GC-MS).

KEY RESULTS

Analysis of variance identified 280 (LC-MS) and 1 (GC-MS) compounds that differed (P <0.05), of which 134 (LC-MS) and 1 (GC-MS) were annotated. Metabolites abundance between ALG+ vs ALG-, RGD+ vs RGD-, and RGD+ vs ALG+ were further investigated to identify potential differences in metabolic processes during the initiation of elongation.

CONCLUSIONS

This study identified changes in phospholipid, glycosphingolipid, lipid signalling, and amino acid metabolic processes as potential RGD-independent mechanisms of elongation and identified changes in lysophosphatidylcholine and sphingolipid secretions during RGD-mediated elongation.

IMPLICATIONS

These results illustrate changes in phospholipid and sphingolipid metabolic processes and secretions may act as mediators of the RGD-integrin adhesion that promotes porcine conceptus elongation.

Global analysis of differential gene expression within the porcine conceptus transcriptome as it transitions through spherical, ovoid, and tubular morphologies during the initiation of elongation

This study aimed to identify transcriptome differences between distinct or transitional stage spherical, ovoid, and tubular porcine blastocysts throughout the initiation of elongation. We performed a global transcriptome analysis of differential gene expression using RNA‐Seq with high temporal resolution between spherical, ovoid, and tubular stage blastocysts at specific sequential stages of development from litters containing conceptus populations of distinct or transitional blastocysts. After RNA‐Seq analysis, significant differentially expressed genes (DEGs) and pathways were identified between distinct morphologies or sequential development stages. Overall, 1898 significant DEGs were identified between distinct spherical and ovoid morphologies, with 311 total DEGs between developmental stages throughout this first morphological transition, while 15 were identified between distinct ovoid and tubular, with eight total throughout these second morphological transition developmental stages. The high quantity of DEGs and pathways between conceptus stages throughout the spherical to ovoid transition suggests the importance of gene regulation during this first morphological transition for initiating elongation. Further, extensive DEG coverage of known elongation signaling pathways was illustrated from spherical to ovoid, and regulation of lipid signaling and membrane/ECM remodeling across these early conceptus stages were implicated as essential to this process, providing novel insights into potential mechanisms governing this rapid morphological change.

Challenges and Considerations during In Vitro Production of Porcine Embryos

Genetically modified pigs have become valuable tools for generating advances in animal agriculture and human medicine. Importantly, in vitro production and manipulation of embryos is an essential step in the process of creating porcine models. As the in vitro environment is still suboptimal, it is imperative to examine the porcine embryo culture system from several angles to identify methods for improvement. Understanding metabolic characteristics of porcine embryos and considering comparisons with other mammalian species is useful for optimizing culture media formulations. Furthermore, stressors arising from the environment and maternal or paternal factors must be taken into consideration to produce healthy embryos in vitro. In this review, we progress stepwise through in vitro oocyte maturation, fertilization, and embryo culture in pigs to assess the status of current culture systems and address points where improvements can be made.

Embryo gene expression in pig pregnancy

Pregnancy is a complex process in which significant changes occur continually in both the corpora lutea and in the endometrium of the females and varies depending on the embryonic, pre-implantation or foetal stages. In the embryonic stages, the majority of genes expressed in the pig embryo correspond to the loss of cellular pluripotency. In contrast, the implantation consists of three phases: elongation of the conceptus, adhesion and union of the embryo to the endometrial epithelium. During these phases, many factors are expressed, including growth factors, molecules that facilitate adhesion and cytokines. All these changes are ultimately regulated by different lipid and hormonal substances, specifically by progesterone, oestradiol and prostaglandins, which regulate the expression of many proteins necessary for the development of the embryo, endometrial remodelling and embryo-maternal communication. This paper is a review of primary gene regulatory mechanisms in pigs during different stages of implantation.

Surface- and Hydrogel-Mediated Delivery of Nucleic Acid Nanoparticles

Gene expression within a cell population can be directly altered through gene delivery approaches. Traditionally for nonviral delivery, plasmids or siRNA molecules, encoding or targeting the gene of interest, are packaged within nanoparticles. These nanoparticles are then delivered to the media surrounding cells seeded onto tissue culture plastic; this technique is termed bolus delivery. Although bolus delivery is widely utilized to screen for efficient delivery vehicles and to study gene function in vitro, this delivery strategy may not result in efficient gene transfer for all cell types or may not identify those delivery vehicles that will be efficient in vivo. Furthermore, bolus delivery cannot be used in applications where patterning of gene expression is needed. In this chapter, we describe methods that incorporate material surfaces (i.e., surface-mediated delivery) or hydrogel scaffolds (i.e., hydrogel-mediated delivery) to efficiently deliver genes. This chapter includes protocols for surface-mediated DNA delivery focusing on the simplest and most effective methods, which include nonspecific immobilization of DNA complexes (both polymer and lipid vectors) onto serum-coated cell culture polystyrene and self-assembled monolayers (SAMs) of alkanethiols on gold. Also, protocols for the encapsulation of DNA/cationic polymer nanoparticles into hydrogel scaffolds are described, including methods for the encapsulation of low amounts of DNA (<0.2 μg/μl) and high amounts of DNA (>0.2 μg/μl) since incorporation of high amounts of DNA pose significant challenges due to aggregation.

Inactivation of porcine interleukin-1β results in failure of rapid conceptus elongation

Conceptus expansion throughout the uterus of mammalian species with a noninvasive epitheliochorial type of placentation is critical establishing an adequate uterine surface area for nutrient support during gestation. Pig conceptuses undergo a unique rapid morphological transformation to elongate into filamentous threads within 1 h, which provides the uterine surface to support development and maintain functional corpora lutea through the production of estrogen. Conceptus production of a unique interleukin 1β, IL1B2, temporally increases during the period of trophoblast remodeling during elongation. CRISPR/Cas9 gene editing was used to knock out pig conceptus IL1B2 expression and the secretion of IL1B2 during the time of conceptus elongation. Trophoblast elongation occurred on day 14 in wild-type (IL1B2+/+) conceptuses but did not occur in ILB2-null (IL1B2-/-) conceptuses. Although the morphological transition of IL1B2-/- conceptuses was inhibited, expression of a number of conceptus developmental genes was not altered. However, conceptus aromatase expression and estrogen secretion were decreased, indicating that IL1B2 may be involved in the spatiotemporal increase in conceptus estrogen synthesis needed for the establishment of pregnancy in the pig and may serve to regulate the proinflammatory response of endometrium to IL1B2 during conceptus elongation and attachment to the uterine surface.

Genetically Engineered Phage Induced Selective H9c2 Cardiomyocytes Patterning in PDMS Microgrooves

A micro-patterned cell adhesive surface was prepared for future design of medical devices. One-dimensional polydimethylsiloxane (PDMS) micro-patterns were prepared by a photolithography process. Afterwards, recombinant filamentous phages that displayed a short binding motif with a cell adhesive peptide (-RGD-) on p8 proteins were immobilized on PDMS microgrooves through simple contact printing to study the cellular response of rat H9c2 cardiomyocyte. While the cell density decreased on PDMS micro-patterns, we observed enhanced cell proliferation and cell to surface interaction on the RGD-phage coated PDMS microgrooves. The RGD-phage coating also supported a better alignment of cell spreading rather than isotropic cell growths as we observed on non-pattered PDMS surface.

In vitro porcine blastocyst development in three-dimensional alginate hydrogels

Appropriate embryonic and fetal development significantly impact pregnancy success and, therefore, the efficiency of swine production. The pre-implantation period of porcine pregnancy is characterized by several developmental hallmarks, which are initiated by the dramatic morphological change that occurs as pig blastocysts elongate from spherical to filamentous blastocysts. Deficiencies in blastocyst elongation contribute to approximately 20% of embryonic loss, and have a direct influence on within-litter birth weight variation. Although factors identified within the uterine environment may play a role in blastocyst elongation, little is known about the exact mechanisms by which porcine (or other species') blastocysts initiate and progress through the elongation process. This is partly due to the difficulty of replicating elongation in vitro, which would allow for its study in a controlled environment and in real-time. We developed a three dimensional (3-D) culture system using alginate hydrogel matrices that can encapsulate pig blastocysts, maintain viability and blastocyst architecture, and facilitate reproducible morphological changes with corresponding expression of steroidogenic enzyme transcripts and estrogen production, consistent with the initiation of elongation in vivo. This review highlights key aspects of the pre-implantation period of porcine pregnancy and the difficulty of studying blastocyst elongation in vivo or by using in vitro systems. This review also provides insights on the utility of 3-D hydrogels to study blastocyst elongation continuously and in real-time as a complementary and confirmatory approach to in vivo analysis.