Bioinspired zero-energy thermal-management device based on visible and infrared thermochromism for all-season energy saving

All-Season Passive Thermal Management Film with Multifunctionality for Efficient Radiative Cooling and Solar Heating

Thermal radiation management is an important aspect of thermal engineering and plays a crucial role in various industrial and environmental applications. However, either cooling or heating devices alone can exacerbate all-season consumption during hot summers or cold winters. We have designed a dual-mode thermal management device that can switch modes by a pull-out method, with femtosecond laser-induced graphene (LIG) on the surface of a polyimide membrane as the heating surface and a SiO2 hollow microsphere coating as the cooling surface. Due to the multi-interface reflection between SiO2 hollow microspheres and air, high reflectivity (93%) and 97% thermal infrared emissivity can be obtained. Under a solar irradiation intensity of 75 J/cm2, a temperature decrease of 6.3 °C can be realized. On the other hand, LIG can achieve an ultra-ambient temperature increase of 35 °C due to its excellent solar light absorption characteristics (ε ≈ 97%) and high thermal conductivity. Temperature regulation can be achieved by switching heating and cooling modes, which shows great promise in agriculture and for food and goods preservation. Also, this design is expected to offer a new approach to energy efficient cooling and heating in architecture.

Dual-Functional Photonic Battery Enabling Dynamic Radiative Thermal Management and Power Supply

Dynamic thermal management materials are pivotal for advancing energy-efficient buildings and promoting global sustainability. However, existing materials typically offer only a single-function of temperature regulation, lacking the integrated power supply capability essential for sustaining indoor activities and building sustainability, particularly in the face of frequent power outages. A photonic battery that combines all-season dynamic radiative thermoregulation with electrical power supply in a single silicon-based unit is demonstrated. This device delivers dual functionality with high infrared emissivity regulation (0.53 at 8-13 µm) and superior energy storage performance, featuring a high specific capacity (≈3271 mAh g-1), areal capacity (≈0.38 mAh cm-2), and efficient energy recycling (71.6%). A reversible ion-interaction-induced phase change mechanism, enabling continuous and non-volatile electro-optical-thermal transformation and significant infrared tunability, is proposed. Our simulations indicate that the implementation of these dynamic materials into buildings could significantly reduce energy consumption by up to 18.4%, equating to 544.8 GJ, and achieve an annual reduction in CO2 emissions of 124.1 tons. This work paves the way for the development of energy-saving electro-driven dynamic materials, marking a significant step forward in global sustainability initiatives.

Fast-Developing Dynamic Radiative Thermal Management: Full-Scale Fundamentals, Switching Methods, Applications, and Challenges

Rapid population growth in recent decades has intensified both the global energy crisis and the challenges posed by climate change, including global warming. Currently, the increased frequency of extreme weather events and large fluctuations in ambient temperature disrupt thermal comfort and negatively impact health, driving a growing dependence on cooling and heating energy sources. Consequently, efficient thermal management has become a central focus of energy research. Traditional thermal management systems consume substantial energy, further contributing to greenhouse gas emissions. In contrast, emergent radiant thermal management technologies that rely on renewable energy have been proposed as sustainable alternatives. However, achieving year-round thermal management without additional energy input remains a formidable challenge. Recently, dynamic radiative thermal management technologies have emerged as the most promising solution, offering the potential for energy-efficient adaptation across seasonal variations. This review systematically presents recent advancements in dynamic radiative thermal management, covering fundamental principles, switching mechanisms, primary materials, and application areas. Additionally, the key challenges hindering the broader adoption of dynamic radiative thermal management technologies are discussed. By highlighting their transformative potential, this review provides insights into the design and industrial scalability of these innovations, with the ultimate aim of promoting renewable energy integration in thermal management applications.

A highly visible-transparent thermochromic smart window with broadband infrared modulation for all-season energy savings

Thermochromic smart windows effectively reduce the energy consumption for buildings through passive light modulation including the transmission of visible (TVis) and near-infrared (TNIR) light, and the emissivity of mid-infrared (εMIR) light in response to ambient temperature change. However, thermochromic windows that maintain high TVis while modulating TNIR and εMIR simultaneously are highly desirable but still challenging. Here, we develop a thermochromic smart window based on a two-way shape memory polymer to enable reversible transformation and achieve TNIR modulation of 44.0% and εMIR modulation of 76.5% while maintaining high TVis (>50%). Compared to traditional windows based on silica glass, this device shows 4°C lower temperature in summer daytime, 2°C higher in winter daytime, and 1°C higher in spring nighttime. It is expected that our device can achieve greater annual energy savings in comparison with commercial glass anywhere in the world and promote the progress of thermochromic windows for energy-efficient buildings.

Materials in Radiative Cooling Technologies

Radiative cooling (RC) is a carbon-neutral cooling technology that utilizes thermal radiation to dissipate heat from the Earth's surface to the cold outer space. Research in the field of RC has garnered increasing interest from both academia and industry due to its potential to drive sustainable economic and environmental benefits to human society by reducing energy consumption and greenhouse gas emissions from conventional cooling systems. Materials innovation is the key to fully exploit the potential of RC. This review aims to elucidate the materials development with a focus on the design strategy including their intrinsic properties, structural formations, and performance improvement. The main types of RC materials, i.e., static-homogeneous, static-composite, dynamic, and multifunctional materials, are systematically overviewed. Future trends, possible challenges, and potential solutions are presented with perspectives in the concluding part, aiming to provide a roadmap for the future development of advanced RC materials.

Anodization-Processed Colored Radiative Thermoregulatory Film

Colored radiative thermal management materials (RTMM) not only provide superior thermoregulatory performance but also satisfy aesthetic requirements. However, the complexity of the preparation procedures and constrained color selection have hindered their widespread adoption. Here, we presented a facile one-step anodizing strategy for fabricating colored dual-mode RTMM based on titanium film (Ti) and P(VDF-HFP) with mid-infrared (MIR) emissivities of 0.07 and 0.96, respectively, which allow for on-demand temperature modulation (rise of 28.2 K and drop of 9 K) without energy consumption. Furthermore, demonstrations of a colored radiative warming membrane also validate the effectiveness of anodizing treatment. The colored Ti/nano PE membrane with 10.8 μm thickness enables a temperature rise of 2.3 K on real human skin, which is much higher than that of commercial fabric with 120 μm thickness (0.7 K). This strategy provides insights for the scalable fabrication and application of colored low emissivity materials, contributing to the goal of a sustainable society.

Nanomaterials in Smart Energy-Efficient Coatings

Temperature is a key manifestation of energy, with about 51% of global energy consumption occurring in the form of heat annually [...].

Bioinspired superwetting oil-water separation strategy: toward the era of openness

Bioinspired superwetting oil-water separation strategies have received significant attention for their potential in addressing global water scarcity and aquatic pollution challenges. Over the past two decades, the field has rapidly developed, reaching a pivotal phase of innovation in the oil-water separation process. However, many groundbreaking studies have not received extensive scientific recognition. In this review, we systematically examine the application of bioinspired superwetting materials for complex multiscale oil-water separation. We discuss the development of 2D membrane filtration and 3D sponge adsorption materials in confined spaces, summarizing the core separation mechanisms, key research findings, and the evolutionary logic of these materials. Additionally, we highlight emerging open-space separation strategies, emphasizing several novel dynamic separation devices of significant importance. We evaluate and compare the design concepts, separation principles, materials used, comprehensive performance, and existing challenges of these diverse strategies. Finally, we summarize these advantages, critical bottlenecks, and prospects of this field and propose potential solutions for real oil-water separation processes from a general perspective.

Dynamic Spectral Metafabric with Unidirectional Moisture Transport Property for Personal Thermal Management

Personal thermal management technology, which adjusts the heat exchange between the human body and the environment, can passively heat or cool the body to maintain a comfortable core temperature, thereby enhancing comfort and reducing energy consumption. However, most existing personal thermal management materials have static properties, such as fixed solar reflectance and infrared emissivity, which do not support real-time dynamic temperature regulation. Moreover, sweat accumulation on the skin surface, while contributing to temperature regulation, can significantly reduce comfort. This study constructs a unidirectional moisture-permeable intelligent thermal management fabric system to achieve superior thermal and moisture comfort in complex environments. The fabric incorporates thermochromic microcapsules into PAN nanofibers by using electrospinning technology for intelligent thermal management. Subsequent hydrophobic treatment of the fiber film surface imparts the fabric with unidirectional wetting properties. The nanofibrous structure provides intrinsic elasticity and breathability. In heating mode, the fabric's average sunlight reflectance is 42.1%, which increases to 82.2% in cooling mode, resulting in a reflectance difference of approximately 40%. The hydrophobic treatment endows the fabric with excellent moisture absorption and perspiration properties, demonstrated by a unidirectional moisture transport index of 696.63 and a perspiration evaporation rate of 5.88 mg/min. When the fabric temperature matches the ambient temperature, the photothermal conversion power difference of the Janus metafabric in two modes reaches 248.37 W m-2. Additionally, Janus metafabrics show the potential for temperature-responsive design and repeated writing applications. The outstanding wearability and dynamic spectral properties of these metafabrics open new pathways for sustainable energy, smart textiles, and thermal-moisture comfort applications.

Switchable and Tunable Radiative Cooling: Mechanisms, Applications, and Perspectives

The cost of annual energy consumption in buildings in the United States exceeds 430 billion dollars ( Science 2019, 364 (6442), 760-763), of which about 48% is used for space thermal management (https://www.iea.org/reports/global-status-report-for-buildings-and-construction-2019), revealing the urgent need for efficient thermal management of buildings and dwellings. Radiative cooling technologies, combined with the booming photonic and microfabrication technologies ( Nature 2014, 515 (7528), 540-544), enable energy-free cooling by radiative heat transfer to outer space through the atmospheric transparent window ( Nat. Commun. 2024, 15 (1), 815). To pursue all-season energy savings in climates with large temperature variations, switchable and tunable radiative coolers (STRC) have emerged in recent years and quickly gained broad attention. This Perspective introduces the existing STRC technologies and analyzes their benefits and challenges in future large-scale applications, suggesting ways for the development of future STRCs.

Mechanically Tunable Transmittance Convection Shield for Dynamic Radiative Cooling

Radiative cooling is the process to dissipate heat to the outer space through an atmospheric window (8-13 μm), which has great potential for energy savings in buildings. However, the traditional "static" spectral characteristics of radiative cooling materials may result in overcooling during the cold season or at night, necessitating the development of dynamic spectral radiative cooling for enhanced energy saving potential. In this study, we showcase the realization of dynamic radiative cooling by modulating the heat transfer process using a tunable transmittance convection shield (TTCS). The transmittance of the TTCS in both solar spectrum and atmospheric window can be dynamically adjusted within ranges of 28.8-72.9 and 27.0-80.5%, with modulation capabilities of ΔTsolar = 44.1% and ΔT8-13 μm = 53.5%, respectively. Field measurements demonstrate that through the modulation, the steady-state temperature of the TTCS architecture is 0.3 °C lower than that of a traditional radiative cooling architecture during the daytime and 3.3 °C higher at nighttime, indicating that the modulation strategy can effectively address the overcooling issue, offering an efficient way of energy saving through dynamic radiative cooling.

Metasurface with all-optical tunability for spatially-resolved and multilevel thermal radiation

Manipulating the thermal emission in the infrared (IR) range significantly impacts both fundamental scientific research and various technological applications, including IR thermal camouflage, information encryption, and radiative cooling. While prior research has put forth numerous materials and structures for these objectives, the significant challenge lies in attaining spatially resolved and dynamically multilevel control over their thermal emissions. In this study, a one-step ultrafast laser writing technique is experimentally demonstrated to achieve position-selective control over thermal emission based on the phase-change material Ge2Sb2Te5 (GST). Ultrafast laser writing technique enables direct fabrication and manipulation of laser-induced crystalline micro/nano-structures on GST films. Thermal emission can be precisely controlled by adjusting the pulse energy of the ultrafast laser, achieving a high thermal emissivity modulation precision of 0.0014. By controlling thermal emission, the ultrafast laser writing technique enables multilevel patterned processing. This provides a promising approach for multilevel IR thermal camouflage, which is demonstrated with emissivity-modulated GST emitters. Remarkably, ultrafast laser-induced crystalline micro/nano-structures display geometric grating features, resulting in a diffraction-based structural color effect. This study demonstrates the effective use of laser-printed patterns for storing information in both visible and infrared spectrum.

Radiative cooling: arising from practice and in turn serving practice

Radiative cooling, as a renewable cooling technology, is expected to mitigate growing global warming. However, the barrier when promoting radiative cooling from the laboratory to practice is still a blind spot and needs to be discussed right now. Here, on the basis of review for brief history, we propose a developing thread that the studies on radiative cooling arise from practice and in turn serves practice at the end. This perspective orderly elaborates fundamental limit in theory, realization of spectral-selective materials, practice on criteria for cooling performance, challenges and corresponding possible solutions in practice, and focusing on serving practice. We hope that the criticism for our own opinion could trigger researchers to deeply consider how to make achievement of radiative cooling better serving practice in the future.

Outdoor Worker Stress Monitoring Electronics with Nanofabric Radiative Cooler-Based Thermal Management

Severe stress endangers outdoor workers who are in an exceedingly hot workplace. Although recent studies quantify stress levels on the human skin, they still rely on rigid, bulky sensor modules, causing data loss from motion artifacts and limited field-deployability for continuous health monitoring. Moreover, no prior work shows a wearable device that can endure heat exposure while showing continuous monitoring of a subject's stress under realistic working environments. Herein, a soft, field-deployable, wearable bioelectronic system is introduced for detecting outdoor workers' stress levels with negligible motion artifacts and controllable thermal management. A nanofabric radiative cooler (NFRC) and miniaturized sensors with a nanomembrane soft electronic platform are integrated to measure stable electrodermal activities and temperature in hot outdoor conditions. The NFRC exhibits outstanding cooling performance in sub-ambient air with high solar reflectivity and high thermal emissivity. The integrated wearable device with all embedded electronic components and the NFRC shows a lower temperature (41.1%) in sub-ambient air than the NFRC-less device while capturing improved operation time (18.2%). In vivo human study of the bioelectronics with agricultural activities demonstrates the device's capability for portable, continuous, real-time health monitoring of outdoor workers with field deployability.

Recent advances in dynamic dual mode systems for daytime radiative cooling and solar heating

Thermal management, including heating and cooling, plays an important role in human productive activities and daily life. Nevertheless, in the actual environment, almost all the ambient scenarios come with the challenge that the objects are located in a quite dynamic and variable environment, which includes fluctuations in aspects such as space, time, sunlight, season, and temperature. It is imperative to develop low-energy or even zero-energy thermal-management technologies with renewable and clean energy. In this review, we summarised the latest technological advances and the prospects in this burgeoning field. First, we present the fundamental principles of the daytime passive radiative cooling (PDRC) thermal management device. Next, In the domain of dual-mode systems, they are classified into various types based on the diverse mechanisms of transitioning between cooling and heating states, including electrical responsive, mechanical responsive, temperature responsive, and solution responsive. Furthermore, we conducted an in-depth analysis of the principles and design methodologies associated with these categories, followed by a comparative assessment of their performance in radiative cooling and solar heating applications. Finally, this review presents the challenges and opportunities of dynamic dual mode thermal management, while also identifying future directions.

Thermochromic Conductive Fibers with Modifiable Solar Absorption for Personal Thermal Management and Temperature Visualization

Thermal management textiles provide an energy-efficient strategy for personal thermal comfort by regulating heat flow between the human body and the environment. However, textiles with a single heating or cooling mode cannot realize temperature regulation under dynamic weather. Furthermore, monocolor textiles do not satisfy aesthetic requirements in a garment. Here, we develop a thermochromic (TC) conductive fiber with a coaxial structure composed of a conductive core and thermochromic shell. The TC conductive fiber-woven fabric has the ability of low-energy dynamic thermal management by combining Joule heating and modulation of solar absorption. Compared with commercial white fabrics, TC conductive fabrics exhibit a maximum temperature drop of 2.5 K, while the temperature of colored commercial fabrics is 7.5-16 K higher than that of commercial white fabrics in the hot. In the cold, the combination of Joule heating and the photothermal effect can provide desired thermal comfort for humans. Meanwhile, heat obtained from solar absorption brings the temperature of a fabric to a predetermined level, which saves energy of 625 W/m2 compared to a conductive-fiber-based textile. In addition, TC conductive fabrics with trichromatic evolution provide a sensitive and instant temperature visualization capable of identification of invisible and intense infrared radiation. These results provide another path to expand potential applications of wearable, flexible electronics.

Bioinspired Thermochromic Textile Based on Robust Cellulose Aerogel Fiber for Self-Adaptive Thermal Management and Dynamic Labels

Aerogel fiber has emerged recently for incorporation in personal thermal management textiles due to its flexibility, scalability, and ultrahigh porosity, which allows the body to keep warm via thermal isolation without energy consumption. However, the functionalization and intellectualization of cellulose-based aerogel fibers have not yet been fully developed. Herein, we propose a biomimicking design inspired by polar bear and Siamese cat hair that combines porous cellulose aerogel fiber (CAF) with reversible thermochromic microcapsules to mimic biological sensory and adaptive thermoregulation functions. The produced CAF has a controllable pore structure, a large specific surface area (230 m2/g), and excellent mechanical strength (∼15 MPa). Low-temperature darkening microcapsules have been incorporated into the robust CAF to spontaneously adjust color by perceiving the ambient temperature. The functional aerogel fiber fabric achieves high thermal insulation and photothermal modulation simultaneously at temperatures below 18 °C. The temperature of the thermochromic fabric was higher by 6 °C than that of the sample without the microcapsules at a light intensity of 0.2 W/cm2. In addition, the aerogel fibers mixed with two types of thermochromic microcapsules exhibit three color switches with fast response, a color-control precision of 0.2 °C, and good cycling performance. This smart aerogel fibers hold great promise for self-adaptive thermal management, temperature indication, information transfer, and anticounterfeiting in textiles.

Scalable Bacterial Cellulose-Based Radiative Cooling Materials with Switchable Transparency for Thermal Management and Enhanced Solar Energy Harvesting

Radiative cooling materials that can dynamically control solar transmittance and emit thermal radiation into cold outer space are critical for smart thermal management and sustainable energy-efficient buildings. This work reports the judicious design and scalable fabrication of biosynthetic bacterial cellulose (BC)-based radiative cooling (Bio-RC) materials with switchable solar transmittance, which are developed by entangling silica microspheres with continuously secreted cellulose nanofibers during in situ cultivation. Theresulting film shows a high solar reflection (95.3%) that can be facilely switched between an opaque state and a transparent state upon wetting. Interestingly, the Bio-RC film exhibits a high mid-infrared emissivity (93.4%) and an average sub-ambient temperature drop of ≈3.7 °C at noon. When integrating with a commercially available semi-transparent solar cell, the switchable solar transmittance of Bio-RC film enables an enhancement of solar power conversion efficiency (opaque state: 0.92%, transparent state: 0.57%, bare solar cell: 0.33%). As a proof-of-concept illustration, an energy-efficient model house with its roof built with Bio-RC-integrated semi-transparent solar cell is demonstrated. This research can shine new light on the design and emerging applications of advanced radiative cooling materials.

Temperature-adaptive rooftop covering with synergetic modulation of solar and thermal radiation for maximal energy saving

The energy consumption for maintaining desired indoor temperature accounts for 20% of primary energy use worldwide. Passive rooftop modulation of solar/thermal radiation without external energy input has a great potential in building energy saving. However, existing passive rooftop modulation techniques failed to simultaneously modulate solar/thermal radiation in response to rooftop surface temperature which is closely related to the building thermal loads, leading to limited or even counter-productive overall energy saving. Here, we report the development of a surface temperature-adaptive rooftop covering with synergetic solar and thermal modulations. The covering, made of a scalable metalized polyethylene film, demonstrated excellent solar absorptance modulation (72.5%) and thermal emissivity modulation (79%) in response to its temperature change from 22°C (indoor heating setpoint) to 25°C (indoor cooling setpoint), and vice versa. Building energy simulations demonstrate that the proposed rooftop covering can achieve all-season energy savings across all climate regions.