Iron-sulfur proteins: spin-coupling model for three-iron clusters

Partial Deoxygenative CO Homocoupling by a Diiron Complex

One route to address climate change is converting carbon dioxide to synthetic carbon-neutral fuels. Whereas carbon dioxide to CO conversion has precedent in homo- and heterogeneous catalysis, deoxygenative coupling of CO to products with C-C bonds-as in liquid fuels-remains challenging. Here, we report coupling of two CO molecules by a diiron complex. Reduction of Fe2 (CO)2 L (2), where L2- is a bis(β-diketiminate) cyclophane, gives [K(THF)5 ][Fe2 (CO)2 L] (3), which undergoes silylation to Fe2 (CO)(COSiMe3 )L (4). Subsequent C-OSiMe3 bond cleavage and C=C bond formation occurs upon reduction of 4, yielding Fe2 (μ-CCO)L. CO derived ligands in this series mediate weak exchange interactions with the ketenylidene affording the smallest J value, with changes to local metal ion spin states and coupling schemes (ferro- vs. antiferromagnetism) based on DFT calculations, Mössbauer and EPR spectroscopy. Finally, reaction of 5 with KEt3 BH or methanol releases the C2 O2- ligand with retention of the diiron core.

Two local minima for structures of [4Fe-4S] clusters obtained with density functional theory methods

[4Fe-4S] clusters are essential cofactors in many proteins involved in biological redox-active processes. Density functional theory (DFT) methods are widely used to study these clusters. Previous investigations have indicated that there exist two local minima for these clusters in proteins. We perform a detailed study of these minima in five proteins and two oxidation states, using combined quantum mechanical and molecular mechanical (QM/MM) methods. We show that one local minimum (L state) has longer Fe-Fe distances than the other (S state), and that the L state is more stable for all cases studied. We also show that some DFT methods may only obtain the L state, while others may obtain both states. Our work provides new insights into the structural diversity and stability of [4Fe-4S] clusters in proteins, and highlights the importance of reliable DFT methods and geometry optimization. We recommend r2SCAN for optimizing [4Fe-4S] clusters in proteins, which gives the most accurate structures for the five proteins studied.

An Open-Cuboidal [Fe3S4] Cluster Characterized in Both Biologically Relevant Redox States

Synthetic analogues of the three common types of Fe-S clusters found in biology─diamond-core [Fe₂S₂] clusters, open-cuboidal [Fe₃S₄] clusters, and cuboidal [Fe₄S₄] clusters─have been reported in each biologically relevant redox state with one exception: the open-cuboidal [Fe₃S₄]⁺ cluster. Here, we describe the synthesis and characterization of an open-cuboidal [Fe₃S₄] cluster in both biologically relevant redox states: [Fe₃S₄]⁺ and [Fe₃S₄]⁰. Like their biological counterparts, the oxidized cluster has a spin-canted, S = ¹/₂ ground state, and the reduced cluster has an S = 2 ground state. Structural analysis reveals that the [Fe₃S₄] core undergoes substantial contraction upon oxidation, in contrast to the minimal structural changes observed for the only [Fe₃S₄] protein for which high-resolution structures are available in both redox states (Azotobacter vinelandii ferredoxin I; Av FdI). This difference between the synthetic models and Av FdI is discussed in the context of electron transfer by [Fe₃S₄] proteins.

Benchmark Study of Redox Potential Calculations for Iron-Sulfur Clusters in Proteins

Redox potentials have been calculated for 12 different iron–sulfur sites of 6 different types with 1–4 iron ions. Structures were optimized with combined quantum mechanical and molecular mechanical (QM/MM) methods, and the redox potentials were calculated using the QM/MM energies, single-point QM methods in a continuum solvent or by QM/MM thermodynamic cycle perturbations. We show that the best results are obtained with a large QM system (∼300 atoms, but a smaller QM system, ∼150 atoms, can be used for the QM/MM geometry optimization) and a large value of the dielectric constant (80). For absolute redox potentials, the B3LYP density functional method gives better results than TPSS, and the results are improved with a larger basis set. However, for relative redox potentials, the opposite is true. The results are insensitive to the force field (charges of the surroundings) used for the QM/MM calculations or whether the protein and solvent outside the QM system are relaxed or kept fixed at the crystal structure. With the best approach for relative potentials, mean absolute and maximum deviations of 0.17 and 0.44 V, respectively, are obtained after removing a systematic error of −0.55 V. Such an approach can be used to identify the correct oxidation states involved in a certain redox reaction.

We have studied redox potentials of 12 iron−sulfur sites of 6 types with 1−4 iron ions. Structures were optimized with combined quantum mechanical and molecular mechanical (QM/MM) methods, and the redox potentials were calculated with QM/MM, QM calculations in a continuum solvent or by QM/MM thermodynamic cycle perturbations. The best results are obtained with the second approach using ∼300 atoms in the QM model and a large dielectric constant.

Characterization of Fe-S Clusters in Proteins by Mӧssbauer Spectroscopy

⁵⁷Fe Mӧssbauer spectroscopy is unparalleled in the study of Fe-S cluster-containing proteins because of its unique ability to detect all forms of iron. Enrichment of biological samples with the ⁵⁷Fe isotope and manipulation of experimental parameters such as temperature and magnetic field allow for elucidation of the number of Fe-S clusters present in a given protein, their nuclearity, oxidation state, geometry, and ligation environment, as well as any transient states relevant to enzyme chemistry. This chapter is arranged in five sections to help navigate an experimentalist to utilize ⁵⁷Fe Mӧssbauer spectroscopy for delineating the role and structure of biological Fe-S clusters. The first section lays out the tools and technical considerations for the preparation of ⁵⁷Fe-labeled samples. The choice of experimental parameters and their effects on the Mӧssbauer spectra are presented in the following two sections. The last two sections provide a theoretical and practical guide on spectral acquisition and analysis relevant to Fe-S centers.

Characterization of Paramagnetic Iron-Sulfur Clusters Using Electron Paramagnetic Resonance Spectroscopy

Continuous-wave (CW) electron paramagnetic resonance (EPR) spectroscopy is a powerful ally in characterizing the multitude of redox-active iron-sulfur cluster-containing ([Fe-S]) species present in biological samples. The technique detects only those clusters that are paramagnetic-having a nonzero total electron spin (S > 0)-thus, it can discriminate between clusters in different oxidation states. The low-temperature CW-EPR spectrum of an [Fe-S] yields the three magnetic g-values that serve as a fingerprint of its electronic structure. This chapter briefly describes the underlying theory that defines this electronic structure and provides a recipe for the acquisition and analysis of EPR spectra of [Fe-S] proteins.

Half-Integer Spin Triangles: Old Dogs, New Tricks

Spin triangles, that is, triangular complexes of half-integer spins, are the oldest molecular nanomagnets (MNMs). Their magnetic properties have been studied long before molecular magnetism was delineated as a research field. This Review presents the history of their study, with references to the parallel development of new experimental investigations and new theoretical ideas used for their interpretation. It then presents an indicative list of spin-triangle families to illustrate their chemical diversity. Finally, it makes reference to recent developments in terms of theoretical ideas and new phenomena, as well as to the relevance of spin triangles to spintronic devices and new physics.

A designed heme-[4Fe-4S] metalloenzyme catalyzes sulfite reduction like the native enzyme

Multielectron redox reactions often require multicofactor metalloenzymes to facilitate coupled electron and proton movement, but it is challenging to design artificial enzymes to catalyze these important reactions, owing to their structural and functional complexity. We report a designed heteronuclear heme-[4Fe-4S] cofactor in cytochrome c peroxidase as a structural and functional model of the enzyme sulfite reductase. The initial model exhibits spectroscopic and ligand-binding properties of the native enzyme, and sulfite reduction activity was improved-through rational tuning of the secondary sphere interactions around the [4Fe-4S] and the substrate-binding sites-to be close to that of the native enzyme. By offering insight into the requirements for a demanding six-electron, seven-proton reaction that has so far eluded synthetic catalysts, this study provides strategies for designing highly functional multicofactor artificial enzymes.

The NMR contribution to protein-protein networking in Fe-S protein maturation

Iron–sulfur proteins were among the first class of metalloproteins that were actively studied using NMR spectroscopy tailored to paramagnetic systems. The hyperfine shifts, their temperature dependencies and the relaxation rates of nuclei of cluster-bound residues are an efficient fingerprint of the nature and the oxidation state of the Fe–S cluster. NMR significantly contributed to the analysis of the magnetic coupling patterns and to the understanding of the electronic structure occurring in [2Fe–2S], [3Fe–4S] and [4Fe–4S] clusters bound to proteins. After the first NMR structure of a paramagnetic protein was obtained for the reduced E. halophila HiPIP I, many NMR structures were determined for several Fe–S proteins in different oxidation states. It was found that differences in chemical shifts, in patterns of unobserved residues, in internal mobility and in thermodynamic stability are suitable data to map subtle changes between the two different oxidation states of the protein. Recently, the interaction networks responsible for maturing human mitochondrial and cytosolic Fe–S proteins have been largely characterized by combining solution NMR standard experiments with those tailored to paramagnetic systems. We show here the contribution of solution NMR in providing a detailed molecular view of “Fe–S interactomics”. This contribution was particularly effective when protein–protein interactions are weak and transient, and thus difficult to be characterized at high resolution with other methodologies.

Interactions between H-bonded [CuII3(μ3-OH)] triangles; a combined magnetic susceptibility and EPR study

X-band EPR spectroscopy and magnetic susceptibility studies elucidate the magnetic exchange scheme within a triangular CuII3(μ₃-OH) complex and the intermolecular dipolar interactions between two H-bonded CuII3(μ₃-OH) units.

Structural, Spectroscopic, and Theoretical Investigation of a T-Shaped [Fe3(μ3-O)] Cluster

The synthesis, X-ray crystal and electronic structures of [Fe₃(μ₃-O)(mpmae)₂(OAc)₂ Cl₃], 1, where mpmae-H = 2-(N-methyl-N-((pyridine-2-yl)methyl)amino)ethanol, are described. This cluster comprises three high-spin ferric ions and exhibits a T-shaped site topology. Variable-frequency electron paramagnetic resonance measurements performed on single crystals of 1 demonstrate a total spin S_T = 5/2 ground state, characterized by a small, negative, and nearly axial zero-field splitting tensor D = -0.49 cm^-1, E/D ≈ 0.055. Analysis of magnetic susceptibility, magnetization, and magneto-structural correlations further corroborate the presence of a sextet ground-spin state. The observed ground state originates from the strong anti-ferromagnetic interaction of two iron(III) spins, with J = 115(5) cm^-1, that, in turn, are only weakly coupled to the spin of the third site, with j = 7(1) cm^-1. These exchange interactions lead to a ground state with magnetic properties that are essentially entirely determined by the weakly coupled site. The contributions of the individual spins to the total ground state of the cluster were monitored using variable-field ⁵⁷Fe Mössbauer spectroscopy. Field-dependent spectra reveal that, while one of the iron sites exhibits a large negative internal field, typical of ferric ions, the other two sites exhibit small, but not null, negative and positive internal fields. A theoretical analysis reveals that these small internal fields originate from the mixing of the lowest S_T = 5/2 excited state into the ground state which, in turn, is induced by a minute structural distortion.

Characterization of Lipoyl Synthase from Mycobacterium tuberculosis

The prevalence of multiple and extensively drug-resistant strains of Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis, is on the rise, necessitating the identification of new targets to combat an organism that has infected one-third of the world's population, according to the World Health Organization. The biosynthesis of the lipoyl cofactor is one possible target, given its critical importance in cellular metabolism and the apparent lack of functional salvage pathways in Mtb that are found in humans and many other organisms. The lipoyl cofactor is synthesized de novo in two committed steps, involving the LipB-catalyzed transfer of an octanoyl chain derived from fatty acid biosynthesis to a lipoyl carrier protein and the LipA-catalyzed insertion of sulfur atoms at C6 and C8 of the octanoyl chain. A number of in vitro studies of lipoyl synthases from Escherichia coli, Sulfolobus solfataricus, and Thermosynechococcus elongatus have been conducted, but the enzyme from Mtb has not been characterized. Herein, we show that LipA from Mtb contains two [4Fe-4S] clusters and converts an octanoyl peptide substrate to the corresponding lipoyl peptide product via the same C6-monothiolated intermediate as that observed in the E. coli LipA reaction. In addition, we show that LipA from Mtb forms a complex with the H protein of the glycine cleavage system and that the strength of association is dependent on the presence of S-adenosyl-l-methionine. We also show that LipA from Mtb can complement a lipA mutant of E. coli, demonstrating the commonalities of the two enzymes. Lastly, we show that the substrate for LipA, which normally acts on a post-translationally modified protein, can be reduced to carboxybenzyl-octanoyllysine.

A [3Fe–3S]3+ cluster with exclusively μ-sulfide donors

A [3Fe–3(μ-S)]³⁺ cluster is reported in which each ferric center has a distorted trigonal pyramidal geometry, with an S = 1/2 ground state for the cluster and unusually anisotropic hyperfine coupling constants as determined by variable temperature magnetometry and Mössbauer spectroscopy.

Metal ion oxidation state assignment based on coordinating ligand hyperfine interaction

In exchange-coupled mixed-valence spin systems, the magnitude and sign of the effective ligand hyperfine interaction (HFI) can be useful in determining the formal oxidation state of the coordinating metal ion, as well as provide information about the coordination geometry. This is due to the fact that the observed ligand HFI is a function of the projection factor (Clebsch-Gordon coefficient) that maps the site spin value S i of the local paramagnetic center onto the total spin of the exchange-coupled system, S T. Recently, this relationship has been successfully exploited in identifying the oxidation state of the Mn ion coordinated by the sole nitrogenous ligand to the oxygen-evolving complex in certain states of photosystem II. The origin and evolution of these efforts is described.

Mössbauer spectroscopy of Fe/S proteins

Iron-sulfur (Fe/S) clusters are structurally and functionally diverse cofactors that are found in all domains of life. (57)Fe Mössbauer spectroscopy is a technique that provides information about the chemical nature of all chemically distinct Fe species contained in a sample, such as Fe oxidation and spin state, nuclearity of a cluster with more than one metal ion, electron spin ground state of the cluster, and delocalization properties in mixed-valent clusters. Moreover, the technique allows for quantitation of all Fe species, when it is used in conjunction with electron paramagnetic resonance (EPR) spectroscopy and analytical methods. (57)Fe-Mössbauer spectroscopy played a pivotal role in unraveling the electronic structures of the "well-established" [2Fe-2S](2+/+), [3Fe-4S](1+/0), and [4Fe-4S](3+/2+/1+/0) clusters and -more-recently- was used to characterize novel Fe/S clustsers, including the [4Fe-3S] cluster of the O2-tolerant hydrogenase from Aquifex aeolicus and the 3Fe-cluster intermediate observed during the reaction of lipoyl synthase, a member of the radical SAM enzyme superfamily.

Evidence for a catalytically and kinetically competent enzyme-substrate cross-linked intermediate in catalysis by lipoyl synthase

Lipoyl synthase (LS) catalyzes the final step in lipoyl cofactor biosynthesis: the insertion of two sulfur atoms at C6 and C8 of an (N(6)-octanoyl)-lysyl residue on a lipoyl carrier protein (LCP). LS is a member of the radical SAM superfamily, enzymes that use a [4Fe-4S] cluster to effect the reductive cleavage of S-adenosyl-l-methionine (SAM) to l-methionine and a 5'-deoxyadenosyl 5'-radical (5'-dA(•)). In the LS reaction, two equivalents of 5'-dA(•) are generated sequentially to abstract hydrogen atoms from C6 and C8 of the appended octanoyl group, initiating sulfur insertion at these positions. The second [4Fe-4S] cluster on LS, termed the auxiliary cluster, is proposed to be the source of the inserted sulfur atoms. Herein, we provide evidence for the formation of a covalent cross-link between LS and an LCP or synthetic peptide substrate in reactions in which insertion of the second sulfur atom is slowed significantly by deuterium substitution at C8 or by inclusion of limiting concentrations of SAM. The observation that the proteins elute simultaneously by anion-exchange chromatography but are separated by aerobic SDS-PAGE is consistent with their linkage through the auxiliary cluster that is sacrificed during turnover. Generation of the cross-linked species with a small, unlabeled (N(6)-octanoyl)-lysyl-containing peptide substrate allowed demonstration of both its chemical and kinetic competence, providing strong evidence that it is an intermediate in the LS reaction. Mössbauer spectroscopy of the cross-linked intermediate reveals that one of the [4Fe-4S] clusters, presumably the auxiliary cluster, is partially disassembled to a 3Fe-cluster with spectroscopic properties similar to those of reduced [3Fe-4S](0) clusters.

Electronic structure of the unique [4Fe-3S] cluster in O2-tolerant hydrogenases characterized by 57Fe Mossbauer and EPR spectroscopy

Iron-sulfur clusters are ubiquitous electron transfer cofactors in hydrogenases. Their types and redox properties are important for H(2) catalysis, but, recently, their role in a protection mechanism against oxidative inactivation has also been recognized for a [4Fe-3S] cluster in O(2)-tolerant group 1 [NiFe] hydrogenases. This cluster, which is uniquely coordinated by six cysteines, is situated in the proximity of the catalytic [NiFe] site and exhibits unusual redox versatility. The [4Fe-3S] cluster in hydrogenase (Hase) I from Aquifex aeolicus performs two redox transitions within a very small potential range, forming a superoxidized state above +200 mV vs. standard hydrogen electrode (SHE). Crystallographic data has revealed that this state is stabilized by the coordination of one of the iron atoms to a backbone nitrogen. Thus, the proximal [4Fe-3S] cluster undergoes redox-dependent changes to serve multiple purposes beyond classical electron transfer. In this paper, we present field-dependent (57)Fe-Mössbauer and EPR data for Hase I, which, in conjunction with spectroscopically calibrated density functional theory (DFT) calculations, reveal the distribution of Fe valences and spin-coupling schemes for the iron-sulfur clusters. The data demonstrate that the electronic structure of the [4Fe-3S] core in its three oxidation states closely resembles that of corresponding conventional [4Fe-4S] cubanes, albeit with distinct differences for some individual iron sites. The medial and distal iron-sulfur clusters have similar electronic properties as the corresponding cofactors in standard hydrogenases, although their redox potentials are higher.

Structural redox control in a 7Fe ferredoxin isolated from Desulfovibrio alaskensis

The redox behaviour of a ferredoxin (Fd) from Desulfovibrio alaskensis was characterized by electrochemistry. The protein was isolated and purified, and showed to be a tetramer containing one [3Fe-4S] and one [4Fe-4S] centre. This ferredoxin has high homology with FdI from Desulfovibrio vulgaris Miyazaki and Hildenborough and FdIII from Desulfovibrio africanus. From differential pulse voltammetry the following signals were identified: [3Fe-4S](+1/0) (E(0')=-158±5mV); [4Fe-4S](+2/+1) (E(0')=-474±5mV) and [3Fe-4S](0/-2) (E(0')=-660±5mV). The effect of pH on these signals showed that the reduced [3Fe-4S](0) cluster has a pK'(red)(')=5.1±0.1, the [4Fe-4S](+2/+1) centre is pH independent, and the [3Fe-4S](0/-2) reduction is accompanied by the binding of two protons. The ability of the [3Fe-4S](0) cluster to be converted into a new [4Fe-4S] cluster was proven. The redox potential of the original [4Fe-4S] centre showed to be dependent on the formation of the new [4Fe-4S] centre, which results in a positive shift (ca. 70mV) of the redox potential of the original centre. Being most [Fe-S] proteins involved in electron transport processes, the electrochemical characterization of their clusters is essential to understand their biological function. Complementary EPR studies were performed.

Combining steady-state and dynamic methods for determining absolute signs of hyperfine interactions: pulsed ENDOR Saturation and Recovery (PESTRE)

The underlying causes of asymmetric intensities in Davies pulsed ENDOR spectra that are associated with the signs of the hyperfine interaction are reinvestigated. The intensity variations in these asymmetric ENDOR patterns are best described as shifts in an apparent baseline intensity that occurs dynamically following on-resonance ENDOR transitions. We have developed an extremely straightforward multi-sequence protocol that is capable of giving the sign of the hyperfine interaction by probing a single ENDOR transition, without reference to its partner transition. This technique, Pulsed ENDOR Saturation and Recovery (PESTRE) monitors dynamic shifts in the 'baseline' following measurements at a single RF frequency (single ENDOR peak), rather than observing anomalous ENDOR intensity differences between the two branches of an ENDOR response. These baseline shifts, referred to as dynamic reference levels (DRLs), can be directly tied to the electron-spin manifold from which that ENDOR transition arises. The application of this protocol is demonstrated on (57)Fe ENDOR of a 2Fe-2S ferredoxin. We use the (14)N ENDOR transitions of the S = 3/2[Fe(II)NO](2+) center of the non-heme iron enzyme, anthranilate dioxygenase (AntDO) to examine the details of the relaxation model using PESTRE.

Theoretical study of the multiline EPR signal from the S(2) state of the oxygen evolving complex of photosystem II: Evidence for a magnetic tetramer

The Oxygen evolving complex of plant photosystem II is made of a manganese cluster that gives rise to a low temperature EPR multiline signal in the S(2) oxidation state. The origin of this EPR signal has been addressed with respect to the question of the magnetic couplings between the electron and nuclear spins of the four possible Mn ions that make up this complex. Considering Mn(III) and Mn(IV) as the only possible oxidation states present in the S(2) state, and no large anisotropy of the magnetic tensors, the breadths of the EPR spectra calculated for dimers and trimers with S = (1/2) have been compared with that of the biological site. It is concluded that neither a dinuclear nor a trinuclear complex made of Mn(III) and Mn(IV) can be responsible for the multiline signal; but that, by contrast, a tetranuclear Mn complex can be the origin of this signal. The general shape of the experimental spectrum, its particular hyperfine pattern, the positions of most of the hyperfine lines and their relative intensities can be fit by a tetramer model described by the following six fitting parameters: g approximately 1.987, A(1) approximately 122.4 10(-4) cm(-1), A(2) approximately 87.2 10(-4) cm(-1), A(3) approximately 81.6 10(-4) cm(-1), A(4) approximately 19.1 10(-4) cm(-1) and deltaH = 24.5 G. A second model described by parameters very close to those given above except for A(4) approximately 77.5 10(-4) cm(-1) gives an equally good fit. However, no other set of parameters gives an EPR spectrum that reproduces the hyperfine pattern of the S(2) multiline signal. This demonstrates that in the S(2) state of the oxygen evolving complex, the four manganese ions are organized in a magnetic tetramer.

In vitro characterization of AtsB, a radical SAM formylglycine-generating enzyme that contains three [4Fe-4S] clusters

Sulfatases catalyze the cleavage of a variety of cellular sulfate esters via a novel mechanism that requires the action of a protein-derived formylglycine cofactor. Formation of the cofactor is catalyzed by an accessory protein and involves the two-electron oxidation of a specific cysteinyl or seryl residue on the relevant sulfatase. Although some sulfatases undergo maturation via mechanisms in which oxygen serves as an electron acceptor, AtsB, the maturase from Klebsiella pneumoniae, catalyzes the oxidation of Ser72 on AtsA, its cognate sulfatase, via an oxygen-independent mechanism. Moreover, it does not make use of pyridine or flavin nucleotide cofactors as direct electron acceptors. In fact, AtsB has been shown to be a member of the radical S-adenosylmethionine superfamily of proteins, suggesting that it catalyzes this oxidation via an intermediate 5'-deoxyadenosyl 5'-radical that is generated by a reductive cleavage of S-adenosyl- l-methionine. In contrast to AtsA, very little in vitro characterization of AtsB has been conducted. Herein we show that coexpression of the K. pneumoniae atsB gene with a plasmid that encodes genes that are known to be involved in iron-sulfur cluster biosynthesis yields soluble protein that can be characterized in vitro. The as-isolated protein contained 8.7 +/- 0.4 irons and 12.2 +/- 2.6 sulfides per polypeptide, which existed almost entirely in the [4Fe-4S] (2+) configuration, as determined by Mossbauer spectroscopy, suggesting that it contained at least two of these clusters per polypeptide. Reconstitution of the as-isolated protein with additional iron and sulfide indicated the presence of 12.3 +/- 0.2 irons and 9.9 +/- 0.4 sulfides per polypeptide. Subsequent characterization of the reconstituted protein by Mossbauer spectroscopy indicated the presence of only [4Fe-4S] clusters, suggesting that reconstituted AtsB contains three per polypeptide. Consistent with this stoichiometry, an as-isolated AtsB triple variant containing Cys --> Ala substitutions at each of the cysteines in its CX 3CX 2C radical SAM motif contained 7.3 +/- 0.1 irons and 7.2 +/- 0.2 sulfides per polypeptide while the reconstituted triple variant contained 7.7 +/- 0.1 irons and 8.4 +/- 0.4 sulfides per polypeptide, indicating that it was unable to incorporate an additional cluster. UV-visible and Mossbauer spectra of both samples indicated the presence of only [4Fe-4S] clusters. AtsB was capable of catalyzing multiple turnovers and exhibited a V max/[E T] of approximately 0.36 min (-1) for an 18-amino acid peptide substrate using dithionite to supply the requisite electron and a value of approximately 0.039 min (-1) for the same substrate using the physiologically relevant flavodoxin reducing system. Simultaneous quantification of formylglycine and 5'-deoxyadenosine as a function of time indicates an approximate 1:1 stoichiometry. Use of a peptide substrate in which the target serine is changed to cysteine also gives rise to turnover, supporting approximately 4-fold the activity of that observed with the natural substrate.

Computational studies of modified [Fe3S4] clusters: Why iron is optimal

This work reports density functional computations of metal-substituted models of biological [Fe3S4] clusters in oxidation states [MFe2S4](+/0/-1) (M=Mn, Fe, Co, Ni, Cu, Zn, and Mo). Geometry optimization with a dielectric screening model is shown to provide a substantial improvement in structure, compared to earlier used standard procedures. The error for average Fe-S bonds decreased from 0.038A to 0.016A with this procedure. Four density functionals were compared, B3LYP, BP86, TPSS, and TPSSh. B3LYP and to a lesser extent TPSSh energies were inconsistent with experiment for the oxidized [Fe3S4]+ cluster. BP86 (and to a slightly lesser extent TPSS) was within expected theoretical and experimental uncertainties for all oxidation states, the only qualitative error being 5kJ/mol in favor of the M(S)=3/2 configuration for the [Fe3S4]+ cluster, so BP86 was used for quantitative results. Computed reorganization energies and reduction potentials point directly towards the [Fe3S4] cluster as the superior choice of electron carrier, with the [ZnFe2S4] cluster a close second. In addition, partially and fully Mo-substituted clusters were investigated and found to have very low reorganization energies but too negative reduction potentials. The results provide a direct rationale why any substitution weakens the cluster as an electron carrier, and thus why the [Fe3S4] composition is optimal in the biological clusters.

Desulfovibrio gigas ferredoxin II: redox structural modulation of the [3Fe-4S] cluster

Desulfovibrio gigas ferredoxin II (DgFdII) is a small protein with a polypeptide chain composed of 58 amino acids, containing one Fe3S4 cluster per monomer. Upon studying the redox cycle of this protein, we detected a stable intermediate (FdIIint) with four 1H resonances at 24.1, 20.5, 20.8 and 13.7 ppm. The differences between FdIIox and FdIIint were attributed to conformational changes resulting from the breaking/formation of an internal disulfide bridge. The same 1H NMR methodology used to fully assign the three cysteinyl ligands of the [3Fe-4S] core in the oxidized state (DgFdIIox) was used here for the assignment of the same three ligands in the intermediate state (DgFdIIint). The spin-coupling model used for the oxidized form of DgFdII where magnetic exchange coupling constants of around 300 cm-1 and hyperfine coupling constants equal to 1 MHz for all the three iron centres were found, does not explain the isotropic shift temperature dependence for the three cysteinyl cluster ligands in DgFdIIint. This study, together with the spin delocalization mechanism proposed here for DgFdIIint, allows the detection of structural modifications at the [3Fe-4S] cluster in DgFdIIox and DgFdIIint.

An Octanuclear Complex Containing the {Fe3O}7+ Metal Core: Structural, Magnetic, Mössbauer, and Electron Paramagnetic Resonance Studies

A new asymmetrically coordinated bis-trinuclear iron(III) cluster containing a [Fe(3)O](7+) core has been synthesized and structurally, magnetically, and spectroscopically characterized. [Fe(6)Na(2)O(2)(O(2)CPh)(10)(pic)(4)(EtOH)(4)(H(2)O)(2)](ClO(4))(2).2EpsilontOH (1.2EpsilontOH) crystallizes in the P space group and consists of two symmetry-related {Fe(3)O](7+) subunits linked by two Na(+) cations. Inside each [Fe(3)O](7+) subunit, the iron(III) ions are antiferromagnetically coupled, and their magnetic exchange is best described by an isosceles triangle model with two equal (J) and one different (J ') coupling constants. On the basis of the H = -2SigmaJ(ij)S(i)S(j) spin Hamiltonian formalism, the two best fits to the data yield solutions J = -27.4 cm(-1), J ' = -20.9 cm(-1) and J = -22.7 cm(-1), J ' = -31.6 cm(-1). The ground state of the cluster is S = (1)/(2). X-band electron paramagnetic resonance (EPR) spectroscopy at liquid-helium temperature reveals a signal comprising a sharp peak at g approximately 2 and a broad tail at higher magnetic fields consistent with the S = (1)/(2) character of the ground state. Variable-temperature zero-field and magnetically perturbed Mössbauer spectra at liquid-helium temperatures are consistent with three antiferromagnetically coupled high-spin ferric ions in agreement with the magnetic susceptibility and EPR results. The EPR and Mössbauer spectra are interpreted by assuming the presence of an antisymmetric exchange interaction with |d| approximately 2-4 cm(-1) and a distribution of exchange constants J(ij).

Treatment of spin-coupled metal-centres in pulsed electron-electron double-resonance experiments

In applications of ELDOR (electron-electron double-resonance) spectroscopy to metal centres, significant g-anisotropy and spin-coupling within multinuclear clusters have to be considered. We show the difficulties and the advantages arising from these effects.

Theoretical investigations on Azotobacter vinelandii ferredoxin I: effects of electron transfer on protein dynamics

Structural, energetic, and dynamical studies of Azotobacter vinelandii ferredoxin I are presented for native and mutant forms. The protein contains two iron-sulfur clusters, one of which ([3Fe-4S]) is believed to play a central role in the electron-coupled proton transfer. Different charge sets for the [3Fe-4S] cluster in its reduced and oxidized state are calculated with broken symmetry ab initio density functional theory methods and used in molecular dynamics (MD) simulations. The validity of the ab initio calculations is assessed by comparing partially optimized structures of the [3Fe-4S] clusters with x-ray structures. Possible proton transfer pathways between the protein and the iron-sulfur cluster are examined by both MD simulations and ab initio calculations. The MD simulations identify three main-chain hydrogen atoms--HN(13), HN(14), and HN(16)--that are within H-bonding distance of the [3Fe-4S] cluster throughout the MD simulations. They could thus play a role in the proton transfer from the protein to the iron-sulfur cluster. By contrast, the HD2(15) atom of the Asp-15 is seldom close enough to the [3Fe-4S] cluster to transfer a proton. Poisson-Boltzmann calculations indicate that there is a low, but nonzero probability, that Asp-15 is protonated at pH 7; this is a requirement for it to serve as a proton donor. Ab initio calculations with a fragment model for the protein find similar behavior for the transfer of a proton from the OH of the protonated side chain and the main-chain NH of Asp-15. The existence of a stable salt bridge between Asp-15 and Lys-84 in the D15E mutant, versus its absence in the wild-type, has been suggested as the cause of the difference in the rate of proton transfer. Extensive MD simulations were done to test this idea; the results do not support the proposal. The present findings, together with the available data, serve as the basis for an alternative proposal for the mechanism of the coupled electron-proton transfer reaction in ferredoxin I.

FeMo cofactor of nitrogenase: a density functional study of states M(N), M(OX), M(R), and M(I)

The M(N) S = (3)/(2) resting state of the FeMo cofactor of nitrogenase has been proposed to have metal-ion valencies of either Mo(4+)6Fe(2+)Fe(3+) (derived from metal hyperfine interactions) or Mo(4+)4Fe(2+)3Fe(3+) (from Mössbauer isomer shifts). Spin-polarized broken-symmetry (BS) density functional theory (DFT) calculations have been undertaken to determine which oxidation level best represents the M(N) state and to provide a framework for understanding its energetics and spectroscopy. For the Mo(4+)6Fe(2+)Fe(3+) oxidation state, the spin coupling pattern for several spin state alignments compatible with S = (3)/(2) were generated and assessed by energy and geometric criteria. The most likely BS spin state is composed of a Mo3Fe cluster with spin S(a) = 2 antiferromagnetically coupled to a 4Fe' cluster with spin S(b) = (7)/(2). This state has a low DFT energy for the isolated FeMoco cluster and the lowest energy when the interaction with the protein and solvent environment is included. This spin state also displays calculated metal hyperfine and Mössbauer isomer shifts compatible with experiment, and optimized geometries that are in excellent agreement with the protein X-ray data. Our best model for the actual spin-coupled state within FeMoco alters this BS state by a slight canting of spins and is analogous in several respects to that found in the 8Fe P-cluster in the same protein. The spin-up and spin-down components of the LUMO contain atomic contributions from Mo(4+) and the homocitrate and from the central prismane Fe sites and muS(2) atoms, respectively. This qualitative picture of the accepting orbitals for M(N) is consistent with observations from Mössbauer spectra of the one-electron reduced states. Similar calculations for the Mo(4+)4Fe(2+)3Fe(3+) oxidation state yield results that are in poorer agreement with experiment. Using the Mo(4+)6Fe(2+)Fe(3+) oxidation level as the most plausible resting state, the geometric, electronic and energetic properties of the one-electron redox transition to the oxidized state, M(OX), catalytically observed M(R) and radiolytically reduced M(I) states have also been explored.

Investigation of exchange couplings in [Fe3S4]+ clusters by electron spin-lattice relaxation

We have studied four proteins containing oxidized 3Fe clusters ([Fe3S4]+, S=1/2, composed of three, antiferromagnetically coupled high-spin ferric ions) by continuous wave (CW) and pulsed EPR techniques: Azotobacter vinelandii ferredoxin I, Desulfovibrio gigas ferredoxin II, and the 3Fe forms of Pyrococcus furiosus ferredoxin and aconitase. The 35 GHz (Q-band) CW EPR signals are simulated to yield experimental g tensors, which either had not been reported, or had been reported only at X-band microwave frequency. Pulsed X- and Q-band EPR techniques are used to determine electron spin-lattice (T1, longitudinal) relaxation times at several positions on the samples' EPR envelope over the temperature range 2-4.2 K. The T1, values vary sharply across the EPR envelope, a reflection of the fact that the envelope results from a distribution in cluster properties, as seen earlier as a distribution in g3 values and in 57 Fe hyperfine interactions, as detected by electron nuclear double resonance spectroscopy. The temperature dependence of 1/T1 is analyzed in terms of the Orbach mechanism, with relaxation dominated by resonant two-phonon transitions to a doublet excited state at approximately 20 cm(-1) above the doublet ground state for all four of these 3Fe proteins. The experimental EPR data are combined with previously reported 57Fe hyperfine data to determine electronic spin exchange-coupling within the clusters, following the model of Kent et al. Their model defines the coupling parameters as follows: J13=J, J12=J(1+epsilon'), J23=J(1+epsilon), where Jij is the isotropic exchange coupling between ferric ions i and j, and epsilon' and epsilon' are measures of coupling inequivalence. We have extended their theory to include the effects of epsilon' not equal to 0 and thus derived an exact expression for the energy of the doublet excited state for any epsilon, epsilon'. This excited state energy corresponds roughly to epsilonJ and is in the range 5-10 cm(-1) for each of these four 3Fe proteins. This magnitude of the product epsilonJ, determined by our time-domain relaxation studies in the temperature range 2-4 K, is the same as that obtained from three other distinct types of study: CW EPR studies of spin relaxation in the range 5.5-50 K, NMR studies in the range 293-303 K, and static susceptibility measurements in the range 1.8-200 K. We suggest that an apparent disagreement as to the individual values of J and epsilon be resolved in favor of the values obtained by susceptibility and NMR (J > or approximately 200 cm(-1) and epsilon> or =0.02 cm(-1)). as opposed to a smaller J and larger r as suggested in CW EPR studies. However, we note that this resolution casts doubt on the accepted theoretical model for describing the distribution in magnetic properties of 3Fe clusters.

Mössbauer study of 4-hydroxybutyryl-CoA dehydratase--probing the role of an iron-sulfur cluster in an overall non-redox reaction

4-Hydroxybutyryl-CoA dehydratase from Clostridium aminobutyricum catalyzes the dehydration of 4-hydroxybutyryl-CoA to crotonyl-CoA. Although dehydration is an overall non-redox reaction, the enzyme contains FAD and Fe-S clusters. Previous work has shown that the Fe-S clusters are difficult to reduce and therefore unlikely to be redox-active in catalysis. Here, Mössbauer spectroscopy has been used to characterise the Fe-S clusters in active as well as in air-inactivated enzyme. In zero magnetic field at 80 K and 4.2 K, the spectra of active dehydratase consisted mainly of one species (95%) with quadrupole splitting, deltaE(Q) = 1.00 mm s(-1) and isomer shift, delta = 0.43 mm s(-1). Magnetically perturbed Mössbauer spectra indicated a spin of zero. In the presence of 6 mM crotonyl-CoA, the spectra remained unchanged. Taken together, the data show that there are [4Fe-4S]2+ in the enzyme, most probably two clusters/homotetramer, that the four iron atoms in each cluster are coordinated in an identical fashion, and that there is no direct interaction with substrates. We therefore infer that the Fe-S clusters serve a structural rather than a catalytic role in 4-hydroxybutyryl-CoA dehydratase. In air-inactivated enzyme (10% residual activity), a new doublet appeared (58%) with deltaE(Q) = 0.72 mm s(-1), delta = 0.32 mm s(-1) and S = 0. The assignment of this subspectrum to [3Fe-4S]+ clusters, based on the typical Mössbauer parameters, is contradicted by the finding of spin zero for the species. One possible explanation could be spin-coupling of two [3Fe-4S]+ clusters in close proximity.

Regulation of iron metabolism in eukaryotes

Iron metabolism is regulated in cells to ensure that iron supplies are adequate and nontoxic. The expression of iron metabolism is regulated primarily by posttranscriptional mechanisms. Ferritin, eALAS, SDHb of Drosophila, and mammalian mitochondrial aconitase are translationally regulated. The TfR is regulated at the level of mRNA stability. Iron regulatory proteins are regulated either by assembly or by disassembly of an iron-sulfur cluster (IRP1) or by rapid degradation in the presence of iron (IRP2). The list of targets for IRP-mediated regulation is growing longer, and a range of possibilities for versatile regulation exists, as each IRP can bind to unique targets that differ from the consensus IRE. The reactivity of iron with oxygen and the creation of toxic by-products may be the evolutionary stimulus that produced this system of tight posttranscriptional gene regulation.

Paramagnetic NMR analysis of the seven-iron ferredoxin from the hyperthermoacidophilic archaeon Desulfurolobus ambivalens reveals structural similarity to other dicluster ferredoxins

The seven-iron ferredoxin from the hyperthermophilic archaeon Desulfurolobus ambivalens has been investigated by one-dimensional and two-dimensional 1H-NMR in its oxidized and dithionite-reduced states. All iron atoms of both the three-iron and the four-iron cluster are bound to cysteine residues whose hyperfine-shifted resonances were characterized. The pattern of these resonances is similar to those from three-iron, four-iron and eight-iron ferredoxins previously described in the literature, but the four-iron cluster has a shift pattern different from that in other seven-iron proteins. A second set of hyperfine-shifted resonances clearly indicates sample heterogeneity, which possibly involves the four-iron cluster. The observation of interresidue NOEs between two different cysteine residues proves the existence of close spatial proximity of the two clusters in D. ambivalens ferredoxin and therefore indicates structural homology to other dicluster ferredoxins. Moreover, this feature is crucial for the sequence-specific assignment of the hyperfine-shifted resonances. The C alpha-C beta-S-Fe dihedral angles of the cysteine residues coordinating the four-iron cluster could be estimated, and the electronic structure of the three-iron cluster is discussed.

Magnetic circular dichroism study of the selenium-substituted form (Fe3Se4) of bovine heart aconitase

The selenium-substituted inactive form of mitochondrial aconitase contains one [3Fe-4Se]1+/0 cluster [Surerus, Kennedy, Beinert and Münck (1989) Proc. Natl. Acad. Sci. U.S.A. 87, 9846-9850]. This cluster was studied in both oxidized and reduced states by magnetic CD (MCD) and EPR spectroscopy. In the MCD spectra, intensity and transition wavelength shifts are observed when compared with the spectra of the native [3Fe-4S]1+/0 cluster. These changes are used to differentiate between the charge-transfer transitions originating from inorganic and cysteinyl sulphur. Using also the data from the EPR spectra, the spin ground state is assigned as S = 1/2 for the oxidized [3Fe-4Se]1+ cluster and S = 2 for the reduced [3Fe-4Se]0 cluster.