The Tc2 transposon in Caenorhabditis elegans

A tudor domain protein, SIMR-1, promotes siRNA production at piRNA-targeted mRNAs in C. elegans

piRNAs play a critical role in the regulation of transposons and other germline genes. In Caenorhabditis elegans, regulation of piRNA target genes is mediated by the mutator complex, which synthesizes high levels of siRNAs through the activity of an RNA-dependent RNA polymerase. However, the steps between mRNA recognition by the piRNA pathway and siRNA amplification by the mutator complex are unknown. Here, we identify the Tudor domain protein, SIMR-1, as acting downstream of piRNA production and upstream of mutator complex-dependent siRNA biogenesis. Interestingly, SIMR-1 also localizes to distinct subcellular foci adjacent to P granules and Mutator foci, two phase-separated condensates that are the sites of piRNA-dependent mRNA recognition and mutator complex-dependent siRNA amplification, respectively. Thus, our data suggests a role for multiple perinuclear condensates in organizing the piRNA pathway and promoting mRNA regulation by the mutator complex.

In the biological world, a process known as RNA interference helps cells to switch genes on and off and to defend themselves against harmful genetic material. This mechanism works by deactivating RNA sequences, the molecular templates cells can use to create proteins.

Overall, RNA interference relies on the cell creating small RNA molecules that can target and inhibit the harmful RNA sequences that need to be silenced. More precisely, in round worms such as Caenorhabditis elegans, RNA interference happens in two steps. First, primary small RNAs identify the target sequences, which are then combatted by newly synthetised, secondary small RNAs. A number of proteins are also involved in both steps of the process.

RNA interference is particularly important to preserve fertility, guarding sex cells against ‘rogue’ segments of genetic information that could be passed on to the next generation. In future sex cells, the proteins involved in RNA interference cluster together, forming a structure called a germ granule. Yet, little is known about the roles and identity of these proteins.

To fill this knowledge gap, Manage et al. focused on the second stage of the RNA interference pathway in the germ granules of C. elegans, examining the molecules that physically interact with a key protein. This work revealed a new protein called SIMR-1.

Looking into the role of SIMR-1 showed that the protein is required to amplify secondary small RNAs, but not to identify target sequences. However, it only promotes the creation of secondary small RNAs if a specific subtype of primary small RNAs have recognized the target RNAs for silencing.

Further experiments also showed that within the germ granule, SIMR-1 is present in a separate substructure different from any compartment previously identified. This suggests that each substep of the RNA interference process takes place at a different location in the granule.

In both C. elegans and humans, disruptions in the RNA interference pathway can lead to conditions such as cancer or infertility. Dissecting the roles of the proteins involved in this process in roundworms may help to better grasp how this process unfolds in mammals, and how it could be corrected in the case of disease.

Visualization and Quantification of Transposon Activity in Caenorhabditis elegans RNAi Pathway Mutants

RNA silencing pathways play critical roles in maintaining quiescence of transposons in germ cells to promote genome integrity. However the precise mechanism by which different types of transposons are recognized by these pathways is not fully understood. Furthermore, the location in the germline where this transposition occurs after disruption of transposon silencing was previously unknown. Here we utilize the spatial and temporal organization of the Caenorhabditis elegans germline to demonstrate that transposition of DNA transposons in RNA silencing pathway mutants occur in all stages of adult germ cells. We further demonstrate that the double-strand breaks generated by transposons can restore homologous recombination in a mutant defective for the generation of meiosis-specific double-strand breaks. Finally, we detected clear differences in transposase expression and transposon excision between distinct branches of the RNA silencing pathway, emphasizing that there are multiple mechanisms by which transposons can be recognized and routed for small-RNA-mediated silencing.

Forward and reverse mutagenesis in C. elegans

Mutagenesis drives natural selection. In the lab, mutations allow gene function to be deciphered. C. elegans is highly amendable to functional genetics because of its short generation time, ease of use, and wealth of available gene-alteration techniques. Here we provide an overview of historical and contemporary methods for mutagenesis in C. elegans, and discuss principles and strategies for forward (genome-wide mutagenesis) and reverse (target-selected and gene-specific mutagenesis) genetic studies in this animal.

DNA transposons: nature and applications in genomics

Repeated DNA makes up a large fraction of a typical mammalian genome, and some repetitive elements are able to move within the genome (transposons and retrotransposons). DNA transposons move from one genomic location to another by a cut-and-paste mechanism. They are powerful forces of genetic change and have played a significant role in the evolution of many genomes. As genetic tools, DNA transposons can be used to introduce a piece of foreign DNA into a genome. Indeed, they have been used for transgenesis and insertional mutagenesis in different organisms, since these elements are not generally dependent on host factors to mediate their mobility. Thus, DNA transposons are useful tools to analyze the regulatory genome, study embryonic development, identify genes and pathways implicated in disease or pathogenesis of pathogens, and even contribute to gene therapy. In this review, we will describe the nature of these elements and discuss recent advances in this field of research, as well as our evolving knowledge of the DNA transposons most widely used in these studies.

Genomic sequence of a mutant strain of Caenorhabditis elegans with an altered recombination pattern

Background

The original sequencing and annotation of the Caenorhabditis elegans genome along with recent advances in sequencing technology provide an exceptional opportunity for the genomic analysis of wild-type and mutant strains. Using the Illumina Genome Analyzer, we sequenced the entire genome of Rec-1, a strain that alters the distribution of meiotic crossovers without changing the overall frequency. Rec-1 was derived from ethylmethane sulfonate (EMS)-treated strains, one of which had a high level of transposable element mobility. Sequencing of this strain provides an opportunity to examine the consequences on the genome of altering the distribution of meiotic recombination events.

Results

Using Illumina sequencing and MAQ software, 83% of the base pair sequence reads were aligned to the reference genome available at Wormbase, providing a 21-fold coverage of the genome. Using the software programs MAQ and Slider, we observed 1124 base pair differences between Rec-1 and the reference genome in Wormbase (WS190), and 441 between the mutagenized Rec-1 (BC313) and the wild-type N2 strain (VC2010). The most frequent base-substitution was G:C to A:T, 141 for the entire genome most of which were on chromosomes I or X, 55 and 31 respectively. With this data removed, no obvious pattern in the distribution of the base differences along the chromosomes was apparent. No major chromosomal rearrangements were observed, but additional insertions of transposable elements were detected. There are 11 extra copies of Tc1, and 8 of Tc2 in the Rec-1 genome, most likely the remains of past high-hopper activity in a progenitor strain.

Conclusion

Our analysis of high-throughput sequencing was able to detect regions of direct repeat sequences, deletions, insertions of transposable elements, and base pair differences. A subset of sequence alterations affecting coding regions were confirmed by an independent approach using oligo array comparative genome hybridization. The major phenotype of the Rec-1 strain is an alteration in the preferred position of the meiotic recombination event with no other significant phenotypic consequences. In this study, we observed no evidence of a mutator effect at the nucleotide level attributable to the Rec-1 mutation.

Tc8, a Tourist-like transposon in Caenorhabditis elegans

Members of the Tourist family of miniature inverted-repeat transposable elements (MITEs) are very abundant among a wide variety of plants, are frequently found associated with normal plant genes, and thus are thought to be important players in the organization and evolution of plant genomes. In Arabidopsis, the recent discovery of a Tourist member harboring a putative transposase has shed new light on the mobility and evolution of MITEs. Here, we analyze a family of Tourist transposons endogenous to the genome of the nematode Caenorhabditis elegans (Bristol N2). One member of this large family is 7568 bp in length, harbors an ORF similar to the putative Tourist transposase from Arabidopsis, and is related to the IS5 family of bacterial insertion sequences (IS). Using database searches, we found expressed sequence tags (ESTs) similar to the putative Tourist transposases in plants, insects, and vertebrates. Taken together, our data suggest that Tourist-like and IS5-like transposons form a superfamily of potentially active elements ubiquitous to prokaryotic and eukaryotic genomes.

Characterisation of a polymorphic Tc1-like transposable element of the parasitic nematode Haemonchus contortus

Hctc1, a member of the Tc1-family of transposable elements was isolated from the parasitic nematode Haemonchus contortus. Hctc1 is 1590 bp long, is flanked by 55 bp inverted repeats and carries a single open reading frame of a 340 amino acid transposase-like protein. Hctc1 is similar to Tc1 of Caenorhabditis elegans and elements Tcb1 and Tcb2 of Caenorhabditis briggsae in the inverted terminal repeats, the open reading frame, as well as the target insertion sequence. Furthermore, the copy number of Hctc1 is comparable with the Tc1 copy number in low copy strains of C. elegans. The sequence of Hctc1 is highly variable in H. contortus due to deletions, insertions and point mutations, with at least five distinct length variants of Hctc1. Most of the Hctc1 variation was within rather than between H. contortus populations. The high level of sequence variation is probably due to variation generally found for members of the Tc1-family, as well as a high background level of genetic variation of H. contortus.

A transposon-based strategy for sequencing repetitive DNA in eukaryotic genomes

Repetitive DNA is a significant component of eukaryotic genomes. We have developed a strategy to efficiently and accurately sequence repetitive DNA in the nematode Caenorhabditis elegans using integrated artificial transposons and automated fluorescent sequencing. Mapping and assembly tools represent important components of this strategy and facilitate sequence assembly in complex regions. We have applied the strategy to several cosmid assembly gaps resulting from repetitive DNA and have accurately recovered the sequences of these regions. Analysis of these regions revealed six novel transposon-like repetitive elements, IR-1, IR-2, IR-3, IR-4, IR-5, and TR-1. Each of these elements represents a middle-repetitive DNA family in C. elegans containing at least 3-140 copies per genome. Copies of IR-1, IR-2, IR-4, and IR-5 are located on all (or most) of the six nematode chromosomes, whereas IR-3 is predominantly located on chromosome X. These elements are almost exclusively interspersed between predicted genes or within the predicted introns of these genes, with the exception of a single IR-5 element, which is located within a predicted exon. IR-1, IR-2, and IR-3 are flanked by short sequence duplications resembling the target site duplications of transposons. We have established a website database (http:(/)/www.welch.jhu.edu/approximately devine/RepDNAdb.html) to track and cross-reference these transposon-like repetitive elements that contains detailed information on individual element copies and provides links to appropriate GenBank records. This set of tools may be used to sequence, track, and study repetitive DNA in model organisms and humans.

Mobilization of a Minos transposon in Drosophila melanogaster chromosomes and chromatid repair by heteroduplex formation

Transposase-mediated mobilization of the element Minos has been studied in the Drosophila melanogaster genome. Excision and transposition of a nonautonomous Minos transposon in the presence of a Minos transposase gene was detected with a dominant eye color marker carried by the transposon. Frequencies of excision in somatic tissues and in the germ line were higher in flies heterozygous for the transposon than in homozygotes or hemizygotes. Transposition of a X chromosome-linked insertion of Minos into new autosomal sites occurred in 1-12% of males expressing transposase, suggesting that this system is usable for gene tagging and enhancer trapping in Drosophila. Sequence analysis of PCR-amplified donor sites after excision showed precise restoration of the original target sequence in approximately 75% of events in heterozygotes and the presence of footprints or partially deleted elements in the remaining events. Most footprints consisted of the four terminal bases of the transposon, flanked by the TA target duplication. Sequencing of a chromosomal donor site that was directly cloned after excision showed a characteristic two-base mismatch heteroduplex in the center of the 6-bp footprint. Circular extrachromosomal forms of the transposon, presumably representing excised Minos elements, could be detected only in the presence of transposase. A model for chromatid repair after Minos excision is discussed in which staggered cuts are first produced at the ends of the inverted repeats, the broken chromatid ends are joined, and the resulting heteroduplex is subsequently repaired. The model also suggests a simple mechanism for the production of the target site duplication and for regeneration of the transposon ends during reintegration.

Identification of putative nonautonomous transposable elements associated with several transposon families in Caenorhabditis elegans

Putative nonautonomous transposable elements related to the autonomous transposons Tc1, Tc2, Tc5, and mariner were identified in the C. elegans database by computational analysis. These elements are found throughout the C. elegans genome and are defined by terminal inverted repeats with regions of sequence similarity, or identity, to the autonomous transposons. Similarity between loci containing related nonautonomous elements ends at, or near, the boundaries of the terminal inverted repeats. In most cases the terminal inverted repeats of the putative nonautonomous transposable elements are flanked by potential target-site duplications consistent with the associated autonomous elements. The nonautonomous elements identified vary considerably in size (from 100 bp to 1.5 kb in length) and copy number in the available database and are localized to introns and flanking regions of a wide variety of C. elegans genes.

The Tc5 family of transposable elements in Caenorhabditis elegans

We have identified Tc5, a new family of transposable genetic elements in the nematode Caenorhabditis elegans. All wild-type varieties of C. elegans that we examined contain 4-6 copies of Tc5 per haploid genome, but we did not observe transposition or excision of Tc5 in these strains. Tc5 is active, however, in the mut-2 mutant strain TR679. Of 60 spontaneous unc-22 mutations isolated from strain TR679, three were caused by insertion of Tc5. All three Tc5-induced mutations are unstable; revertants results from precise or nearly precise excision of Tc5. Individual Tc5 elements are similar to each other in size and structure. The 3.2-kb element is bounded by inverted terminal repeats of nearly 500 bp. Eight of the ten terminal nucleotides of Tc5 are identical to the corresponding nucleotides of Tc4. Further, both elements recognize the same target site for insertion (CTNAG) and both cause duplication of the central TNA trinucleotide upon insertion. Other than these similarities to Tc4, Tc5 is unrelated to the three other transposon families (Tc1, Tc3 and Tc4) that transpose and excise at high frequency in mut-2 mutant strains. Mechanisms are discussed by which four apparently unrelated transposon families are all affected by the same mut-2 mutation.

Identification of a mariner-like repetitive sequence in C. elegans

A repetitive element in C.elegans has been found that bears high homology to the element mariner of Drosophila mauritiana (EMBL accession number X77804). This element is present in about 20 copies in the N2 strain of C.elegans, and appears in roughly equal copy numbers in the related strain BO and in the hybrid strains RW7097 and TR679. There is only one copy of this MLE in three related species of Caenorhabditis. A cDNA of this mariner-like element (MLE) codes for a protein with 58% homology to the Drosophila transposase. The mariner-like element is not mobile in N2. This class of elements has now been described in insects, planaria and nematodes (GenBank accession number M98552 and this report).

Extrachromosomal circular copies of the transposon Tc1

The 1.6 kb Tc1 transposable element of Caenorhabditis elegans undergoes excision and transposition in the germline. In somatic tissue it is excised at high frequency. Extrachromosomal linear and circular copies of Tc1 have been identified that are likely to be products of somatic and germline excision. In the present study, we have determined the sequences of the sites of circularization in circular extrachromosomal Tc1 molecules. DNA molecules containing these sites were cloned after PCR amplification with primers directed outward from within Tc1. Sequences were obtained with two complete Tc1 ends and one or more intervening copies of the TA dinucleotide, with one complete end and one deleted end, and with two deleted ends. The 24 clones had different structures, indicating the pool of molecules serving as PCR templates was heterogeneous. The predominant circular junction had one or more nucleotides deleted from at least one transposon end. Such a molecule without two complete ends might not be expected to serve as a transposition intermediate. Hence, some extrachromosomal circular Tc1 molecules may result from a deadend excision pathway.

Site-selected insertion of the transposon Tc1 into a Caenorhabditis elegans myosin light chain gene

We used the polymerase chain reaction to detect insertions of the transposon Tc1 into mlc-2, one of two Caenorhabditis elegans regulatory myosin light chain genes. Our goals were to develop a general method to identify mutations in any sequenced gene and to establish the phenotype of mlc-2 loss-of-function mutants. The sensitivity of the polymerase chain reaction allowed us to identify nematode populations containing rare Tc1 insertions into mcl-2. mlc-2::Tc1 mutants were subsequently isolated from these populations by a sib selection procedure. We isolated three mutants with Tc1 insertions within the mlc-2 third exon and a fourth strain with Tc1 inserted in nearby noncoding DNA. To demonstrate the generality of our procedure, we isolated two additional mutants with Tc1 insertions within hlh-1, the C. elegans MyoD homolog. All of these mutants are essentially wild type when homozygous. Despite the fact that certain of these mutants have Tc1 inserted within exons of the target gene, these mutations may not be true null alleles. All three of the mlc-2 mutants contain mlc-2 mRNA in which all or part of Tc1 is spliced from the pre-mRNA, leaving small in-frame insertions or deletions in the mature message. There is a remarkable plasticity in the sites used to splice Tc1 from these mlc-2 pre-mRNAs; certain splice sites used in the mutants are very different from typical eukaryotic splice sites.

Site-selected insertion of the transposon Tc1 into a Caenorhabditis elegans myosin light chain gene

We used the polymerase chain reaction to detect insertions of the transposon Tc1 into mlc-2, one of two Caenorhabditis elegans regulatory myosin light chain genes. Our goals were to develop a general method to identify mutations in any sequenced gene and to establish the phenotype of mlc-2 loss-of-function mutants. The sensitivity of the polymerase chain reaction allowed us to identify nematode populations containing rare Tc1 insertions into mcl-2. mlc-2::Tc1 mutants were subsequently isolated from these populations by a sib selection procedure. We isolated three mutants with Tc1 insertions within the mlc-2 third exon and a fourth strain with Tc1 inserted in nearby noncoding DNA. To demonstrate the generality of our procedure, we isolated two additional mutants with Tc1 insertions within hlh-1, the C. elegans MyoD homolog. All of these mutants are essentially wild type when homozygous. Despite the fact that certain of these mutants have Tc1 inserted within exons of the target gene, these mutations may not be true null alleles. All three of the mlc-2 mutants contain mlc-2 mRNA in which all or part of Tc1 is spliced from the pre-mRNA, leaving small in-frame insertions or deletions in the mature message. There is a remarkable plasticity in the sites used to splice Tc1 from these mlc-2 pre-mRNAs; certain splice sites used in the mutants are very different from typical eukaryotic splice sites.

A variant Tc4 transposable element in the nematode C. elegans could encode a novel protein

A variant C. elegans Tc4 transposable element, Tc4-rh1030, has been sequenced and is 3483 bp long. The Tc4 element that had been analyzed previously is 1605 bp long, consists of two 774-bp nearly perfect inverted terminal repeats connected by a 57-bp loop, and lacks significant open reading frames. In Tc4-rh1030, by comparison, a 2343-bp novel sequence is present in place of a 477-bp segment in one of the inverted repeats. The novel sequence of Tc4-rh1030 is present about five times per haploid genome and is invariably associated with Tc4 elements; we have used the designation Tc4v to denote this variant subfamily of Tc4 elements. Sequence analysis of three cDNA clones suggests that a Tc4v element contains at least five exons that could encode a novel basic protein of 537 amino acid residues. On northern blots, a 1.6-kb Tc4v-specific transcript was detected in the mutator strain TR679 but not in the wild-type strain N2; Tc4 elements are known to transpose in TR679 but appear to be quiescent in N2. We have analyzed transcripts produced by an unc-33 gene that has the Tc4-rh1030 insertional mutation in its transcribed region; all or almost all of the Tc4v sequence is frequently spliced out of the mutant unc-33 transcripts, sometimes by means of non-consensus splice acceptor sites.

Analysis of the Caenorhabditis elegans axonal guidance and outgrowth gene unc-33

Mutations in the unc-33 gene of the nematode Caenorhabditis elegans lead to severely uncoordinated movement, abnormalities in the guidance and outgrowth of the axons of many neurons, and a superabundance of microtubules in neuronal processes. We have cloned unc-33 by tagging the gene with the transposable element Tc4. Three unc-33 messages, which are transcribed from a genomic region of at least 10 kb, were identified and characterized. The three messages have common 3' ends and identical reading frames. The largest (3.8-kb) message consists of the 22-nucleotide trans-spliced leader SL1 and 10 exons (I-X); the intermediate-size (3.3-kb) message begins with SL1 spliced to the 5' end of exon V and includes exons V-X; and the smallest (2.8-kb) message begins within exon VII and also includes exons VIII-X. A gamma-ray-induced deletion mutation situated within exon VIII reduces the sizes of all three messages by 0.5 kb. The three putative polypeptides encoded by the three messages overlap in C-terminal sequence but differ by the positions at which their N termini begin; none has significant similarity to any other known protein. A Tc4 insertion in exon VII leads to alterations in splicing that result in three approximately wild-type-size messages: the Tc4 sequence and 28 additional nucleotides are spliced out of the two larger messages; the Tc4 sequence is trans-spliced off the smallest message such that SL1 is added 13 nucleotides upstream of the normal 5' end of the smallest message.

The Tc2 transposon of Caenorhabditis elegans has the structure of a self-regulated element

We have analyzed the sequence of the Tc2 transposon of the nematode Caenorhabditis elegans. The Tc2 element is 2,074 bp in length and has perfect inverted terminal repeats of 24 bp. The structure of this element suggests that it may have the capacity to code for a transposase protein and/or for regulatory functions. Three large reading frames on one strand exhibit nonrandom codon usage and may represent exons. The first open coding region is preceded by a potential CAAT box, TATA box, and consensus heat shock sequence. In addition to its inverted terminal repeats, Tc2 has an unusual structural feature: subterminal degenerate direct repeats that are arranged in an irregular overlapping pattern. We have also examined the insertion sites of two Tc2 elements previously identified as the cause of restriction fragment length polymorphisms. Both insertions generated a target site duplication of 2 bp. One element had inserted inside the inverted terminal repeat of another transposon, splitting it into two unequal parts.

Tec2, a second transposon-like element demonstrating developmentally programmed excision in Euplotes crassus

The analysis of a repetitive DNA interruption of the micronuclear precursor to a 0.85-kb macronuclear gene in the hypotrich Euplotes crassus has led to the identification of a second transposon-like element named Tec2. Two copies of this element, one inserted into the other, compose the interruption. The Tec2 element resembles the previously characterized Tec1 element in overall size, copy number, length, and extreme terminal sequence of its inverted repeats and in the apparent use of a 5'-TA-3' target site. In addition, extrachromosomal circular forms of Tec2 appear in DNA isolated from cells undergoing macronuclear development at the same time and with the same conformation as extrachromosomal circular forms of Tec1. These similarities suggest that the Tec1 and Tec2 elements may be under the same type of regulation during macronuclear development.

Tec2, a second transposon-like element demonstrating developmentally programmed excision in Euplotes crassus

The analysis of a repetitive DNA interruption of the micronuclear precursor to a 0.85-kb macronuclear gene in the hypotrich Euplotes crassus has led to the identification of a second transposon-like element named Tec2. Two copies of this element, one inserted into the other, compose the interruption. The Tec2 element resembles the previously characterized Tec1 element in overall size, copy number, length, and extreme terminal sequence of its inverted repeats and in the apparent use of a 5'-TA-3' target site. In addition, extrachromosomal circular forms of Tec2 appear in DNA isolated from cells undergoing macronuclear development at the same time and with the same conformation as extrachromosomal circular forms of Tec1. These similarities suggest that the Tec1 and Tec2 elements may be under the same type of regulation during macronuclear development.

A transposon-related palindromic repetitive sequence from C. elegans

A family of transposon-like sequences in the C. elegans genome is described. This family, termed the Tc6 family, consists mostly of conserved, 1.6 kb elements. Four Tc6 elements or partial elements have been cloned and the DNA sequences of three were determined. One appears to be a complete element of 1603 nucleotides, consisting of a palindrome of 765 nucleotides, with a central, non-palindromic region of 73 nucleotides. Another has an identical structure except for an internal deletion. A third is a partial element terminating at a probable internal restriction site used for cloning. A fourth clone contained portions of the Tc6 sequence juxtaposed to non-Tc6 sequences. All C. elegans strains examined contain 20-30 Tc6 elements. The ends of Tc6 elements are conserved and have sequence similarity to the ends of C. elegans transposons Tc1 and Tc3. The ends of Tc6 elements also have sequence similarity to the heptamer portion of the immunoglobulin and T-cell receptor recombination signal sequence, raising the possibility of wide phylogenetic conservation of the recombination mechanism. Tc6 elements also share sequence motifs with plant-pathogenic viroid RNA's, possibly indicative of a Tc6 RNA replicative phase.

Tc4, a Caenorhabditis elegans transposable element with an unusual fold-back structure

We have identified and characterized a family of transposable elements in the nematode Caenorhabditis elegans. The Tc4 transposable element family is present at about 20 copies per haploid genome in the C. elegans Bristol and Bergerac strains. Although Tc4 transposition events have not been observed in these wild-type strains, we have identified Tc4 transposition events in the mut-2 mutant strain TR679, in which the elements Tc1 and Tc3 also transpose at a higher frequency than in the wild type. We determined the sequence of one Tc4 element. This 1.6-kilobase element contains almost perfect inverted terminal repeats of 774 base pairs (bp) with a 57-bp unique internal sequence. Tc4 is a fold-back element, but its long inverted terminal repeats, unlike those of the fold-back elements of other organisms, do not consist of multiple short repeats. In the two cases studied, Tc4 insertion resulted in duplication of a TNA trinucleotide target site. The family of Tc4 elements differs from other C. elegans transposable element families in structure, degree of structural heterogeneity, and target-site specificity.