Intersubunit contacts made by tryptophan 120 with biotin are essential for both strong biotin binding and biotin-induced tighter subunit association of streptavidin

From Weak Interactions to High Stability: Deciphering the Streptavidin-Biotin Interaction through NMR and Computational Analysis

Understanding weak interactions in protein-ligand complexes is essential for advancing drug design. Here, we combine experimental and quantum mechanical approaches to study the streptavidin-biotin complex, one of the strongest interacting protein-ligand systems. Using a monomeric streptavidin mutant, we analyze 1H NMR chemical shift perturbations (CSPs) of biotin upon binding, identifying remarkable upfield shifts of up to -3.2 ppm. Quantum chemical calculations attribute these shifts primarily to aromatic ring currents, with additional contributions from charge transfer effects linked to weak interactions. The agreement between experimental and computed chemical shifts validated the X-ray structure as a reliable basis for detailed computational analyses. Energy decomposition analysis reveals that electrostatics dominate the biotin-streptavidin interaction, complemented by significant orbital and dispersion contributions. Notably, weak noncovalent interactions, such as CH···S, CH···π, and CH···HC contacts, driven by London dispersion forces, contribute ∼44% to the complex's stability.

Assembly-enhanced recognition: A biomimetic pathway to achieve ultrahigh affinities

On the one hand, nature utilizes hierarchical assemblies to create complex biological binding pockets, enabling ultrastrong recognition toward substrates in aqueous solutions. On the other hand, chemists have been fervently pursuing high-affinity recognition by constructing covalently well-preorganized stereoelectronic cavities. The potential of noncovalent assembly, however, for enhancing molecular recognition has long been underestimated. Inspired by (strept)avidin, an amphiphilic azocalix[4]arene derivative capable of assembly in aqueous solutions has been explored by us and demonstrated to exhibit ultrahigh binding affinity (up to 1012 M-1), which is almost four orders of magnitude higher than those reported for nonassembled azocalix[4]arenes. An ultrastable azocalix[4]arene/photosensitizer complex has been applied in hypoxia-targeted photodynamic therapy for tumors. These findings highlight the immense potential of an assembly-enhanced recognition strategy in the development of the next generation of artificial receptors with appropriate functionalities and extraordinary recognition properties.

Streptavidin-drug conjugates streamline optimization of antibody-based conditioning for hematopoietic stem cell transplantation

Hematopoietic stem cell transplantation (HSCT) conditioning using antibody-drug conjugates (ADC) is a promising alternative to conventional chemotherapy- and irradiation-based conditioning regimens. The drug payload bound to an ADC is a key contributor to its efficacy and potential toxicities; however, a comparison of HSCT conditioning ADCs produced with different toxic payloads has not been performed. Indeed, ADC optimization studies in general are hampered by the inability to produce and screen multiple combinations of antibody and drug payload in a rapid, cost-effective manner. Herein, we used Click chemistry to covalently conjugate four different small molecule payloads to streptavidin; these streptavidin-drug conjugates can then be joined to any biotinylated antibody to produce stable, indirectly conjugated ADCs. Evaluating CD45-targeted ADCs produced with this system, we found the pyrrolobenzodiazepine (PBD) dimer SGD-1882 was the most effective payload for targeting mouse and human hematopoietic stem cells (HSCs) and acute myeloid leukemia cells. In murine syngeneic HSCT studies, a single dose of CD45-PBD enabled near-complete conversion to donor hematopoiesis. Finally, human CD45-PBD provided significant antitumor benefit in a patient-derived xenograft model of acute myeloid leukemia. As our streptavidin-drug conjugates were generated in-house with readily accessible equipment, reagents, and routine molecular biology techniques, we anticipate this flexible platform will facilitate the evaluation and optimization of ADCs for myriad targeting applications.

Ligand-Mediated Mechanical Enhancement in Protein Complexes at Nano- and Macro-Scale

Protein self-assembly plays a vital role in a myriad of biological functions and in the construction of biomaterials. Although the physical association underlying these assemblies offers high specificity, the advantage often compromises the overall durability of protein complexes. To address this challenge, we propose a novel strategy that reinforces the molecular self-assembly of protein complexes mediated by their ligand. Known for their robust noncovalent interactions with biotin, streptavidin (SAv) tetramers are examined to understand how the ligand influences the mechanical strength of protein complexes at the nanoscale and macroscale, employing atomic force microscopy-based single-molecule force spectroscopy, rheology, and bioerosion analysis. Our study reveals that biotin binding enhances the mechanical strength of individual SAv tetramers at the nanoscale. This enhancement translates into improved shear elasticity and reduced bioerosion rates when SAv tetramers are utilized as cross-linking junctions within hydrogel. This approach, which enhances the mechanical strength of protein-based materials without compromising specificity, is expected to open new avenues for advanced biotechnological applications, including self-assembled, robust biomimetic scaffolds and soft robotics.

Recent Advances in Supramolecular Affinity Separations: Affinity Chromatography and Related Methods

Affinity chromatography is a technique that uses a stationary phase based on the supramolecular interactions that occur in biological systems or mimics of these systems. This method has long been a popular tool for the isolation, measurement, and characterization of specific targets in complex samples. This review discusses the basic concepts of this method and examines recent developments in affinity chromatography and related supramolecular separation methods. Topics that are examined include advances that have occurred in the types of supports, approaches to immobilization, and binding agents that are employed in this method. New developments in the applications of affinity chromatography are also summarized, including an overview on the use of this method for biochemical purification, sample preparation or analysis, chiral separations, and biointeraction studies.

Engineering a disulfide-gated switch in streptavidin enables reversible binding without sacrificing binding affinity

Although high affinity binding between streptavidin and biotin is widely exploited, the accompanying low rate of dissociation prevents its use in many applications where rapid ligand release is also required. To combine extremely tight and reversible binding, we have introduced disulfide bonds into opposite sides of a flexible loop critical for biotin binding, creating streptavidin muteins (M88 and M112) with novel disulfide-switchable binding properties. Crystal structures reveal how each disulfide exerts opposing effects on structure and function. Whereas the disulfide in M112 disrupts the closed conformation to increase k_off, the disulfide in M88 stabilizes the closed conformation, decreasing k_off 260-fold relative to streptavidin. The simple and efficient reduction of this disulfide increases k_off 19,000-fold, thus creating a reversible redox-dependent switch with 70-fold faster dissociation kinetics than streptavidin. The facile control of disulfide formation in M88 will enable the development of many new applications requiring high affinity and reversible binding.

A bio-coupling approach using a dextran-binding domain to immobilize an engineered streptavidin to Sephadex for easy preparation of affinity matrix

An engineered streptavidin, SAVSBPM18 with reversible biotin binding capability, has been successfully applied to purify biotinylated and streptavidin-binding peptide (SBP) tagged proteins. To simplify the preparation for the SAVSBPM18 affinity matrix without chemical conjugation, two bio-coupling approaches were developed based on a 14-kDa dextran-binding domain (DBD) from a Leuconostoc mesenteroides dextransucrase. The first approach offers simplicity for bio-coupling by creating a direct fusion, SAVSBPM18-Linker-DBD. Purification of the fusion from crude extract and its immobilization to Sephadex can be consolidated in one-step. The second approach aims at flexibility. A SnoopCatcher (SC) was fused to DBD to create SC-Linker-DBD. This fusion can covalently capture any recombinant proteins tagged with a SnoopTag (ST) including SAVSBPM18-Linker-ST via the formation of an isopeptide bond at the interface through the SnoopCatcher-SnoopTag interaction. Although monomeric DBD binds to dextran with nanomolar affinity, DBD tetramerized via streptavidin (SAVSBPM18-Linker-ST·SC-Linker-DBD) showed an even tighter binding to Sephadex. The majority of the fluorescently labelled DBD tetramers were retained on the Sephadex surface even after four months. Affinity columns generated using either approach effectively purified both SBP-tagged and biotinylated proteins. These columns are reusable and functional even after a year of frequent use.

Streptavidin cooperative allosterism upon binding biotin observed by differential changes in intrinsic fluorescence

While the binding of biotin by streptavidin does not appear to be cooperative in the traditional sense of altered binding strength, it has been suggested that it may be cooperative in terms of differential structural changes in the protein. In this work we present intrinsic tryptophan fluorescence data as evidence of a cooperative structural change. The technique involves examination of the differences in fluorescence emission corresponding to distinct tryptophan populations accompanying protein-ligand binding. Specifically we note that the 335 nm emission population (i.e. more hydrophobic) saturates prior to the saturation of the 350 nm emission population commonly used in the standard binding activity assay. We also note that the wavelength of maximum emission, total integrated fluorescence emission and full width at half maximum during the titration of ligand into streptavidin also reach saturation before the expected 4:1 stoichiometric end point. This suggests that the binding of the first 3 biotins effect greater structural changes in the protein than the final ligand.

Probing Membrane Receptors with Enhanced Raman Imaging

Our lab has shown that nanoparticles functionalized with short peptides can selectively bind to receptor proteins in vitro. Our results indicate that the Raman signals observed from purified receptors in surface enhanced Raman scattering (SERS) experiments match those observed with tip-enhanced Raman scattering (TERS) experiments performed on membrane receptors in intact cell membranes. Analysis of the observed Raman signals suggest the signals arise from the amino-acids in the protein receptor responsible for binding and recognition of the ligand attached to the nanoparticle probe. Further experiments show the variance in the data correlates with affinity of the nanoparticle probe with a specific receptor. This result illustrates a new approach to studying membrane receptors.

Monodisperse measurement of the biotin-streptavidin interaction strength in a well-defined pulling geometry

The widely used interaction of the homotetramer streptavidin with the small molecule biotin has been intensively studied by force spectroscopy and has become a model system for receptor ligand interaction. However, streptavidin's tetravalency results in diverse force propagation pathways through the different binding interfaces. This multiplicity gives rise to polydisperse force spectroscopy data. Here, we present an engineered monovalent streptavidin tetramer with a single cysteine in its functional subunit that allows for site-specific immobilization of the molecule, orthogonal to biotin binding. Functionality of streptavidin and its binding properties for biotin remain unaffected. We thus created a stable and reliable molecular anchor with a unique high-affinity binding site for biotinylated molecules or nanoparticles, which we expect to be useful for many single-molecule applications. To characterize the mechanical properties of the bond between biotin and our monovalent streptavidin, we performed force spectroscopy experiments using an atomic force microscope. We were able to conduct measurements at the single-molecule level with 1:1-stoichiometry and a well-defined geometry, in which force exclusively propagates through a single subunit of the streptavidin tetramer. For different force loading rates, we obtained narrow force distributions of the bond rupture forces ranging from 200 pN at 1,500 pN/s to 230 pN at 110,000 pN/s. The data are in very good agreement with the standard Bell-Evans model with a single potential barrier at Δx0 = 0.38 nm and a zero-force off-rate koff,0 in the 10-6 s-1 range.

Amine Landscaping to Maximize Protein-Dye Fluorescence and Ultrastable Protein-Ligand Interaction

Chemical modification of proteins provides great opportunities to control and visualize living systems. The most common way to modify proteins is reaction of their abundant amines with N-hydroxysuccinimide (NHS) esters. Here we explore the impact of amine number and positioning on protein-conjugate behavior using streptavidin-biotin, a central research tool. Dye-NHS modification of streptavidin severely damaged ligand binding, necessitating development of a new streptavidin-retaining ultrastable binding after labeling. Exploring the ideal level of dye modification, we engineered a panel bearing 1–6 amines per subunit: “amine landscaping.” Surprisingly, brightness increased as amine number decreased, revealing extensive quenching following conventional labeling. We ultimately selected Flavidin (fluorophore-friendly streptavidin), combining ultrastable ligand binding with increased brightness after conjugation. Flavidin enhanced fluorescent imaging, allowing more sensitive and specific cell labeling in tissues. Flavidin should have wide application in molecular detection, providing a general insight into how to optimize simultaneously the behavior of the biomolecule and the chemical probe.

•

Labeling of streptavidin with small-molecule dyes impairs ligand binding

•

K121R mutation rescues ligand stability after dye labeling

•

Landscaping of protein amines optimizes brightness

•

Fluorophore-friendly streptavidin improves imaging specificity and sensitivity

The role of CH/π interactions in the high affinity binding of streptavidin and biotin

The streptavidin-biotin complex has an extraordinarily high affinity (Ka: 10¹⁵mol^-1) and contains one of the strongest non-covalent interactions known. This strong interaction is widely used in biological tools, including for affinity tags, detection, and immobilization of proteins. Although hydrogen bond networks and hydrophobic interactions have been proposed to explain this high affinity, the reasons for it remain poorly understood. Inspired by the deceased affinity of biotin observed for point mutations of streptavidin at tryptophan residues, we hypothesized that a CH/π interaction may also contribute to the strong interaction between streptavidin and biotin. CH/π interactions were explored and analyzed at the biotin-binding site and at the interface of the subunits by the fragment molecular orbital method (FMO) and extended applications: PIEDA and FMO4. The results show that CH/π interactions are involved in the high affinity for biotin at the binding site of streptavidin. We further suggest that the involvement of CH/π interactions at the subunit interfaces and an extended CH/π network play more critical roles in determining the high affinity, rather than involvement at the binding site.

A simple approach for preparation of affinity matrices: Simultaneous purification and reversible immobilization of a streptavidin mutein to agarose matrix

SAVSBPM18 is an engineered streptavidin for affinity purification of both biotinylated biomolecules and recombinant proteins tagged with streptavidin binding peptide (SBP) tags. To develop a user-friendly approach for the preparation of the SAVSBPM18-based affinity matrices, a designer fusion protein containing SAVSBPM18 and a galactose binding domain was engineered. The galactose binding domain derived from the earthworm lectin EW29 was genetically modified to eliminate a proteolytic cleavage site located at the beginning of the domain. This domain was fused to the C-terminal end of SAVSBPM18. It allows the SAVSBPM18 fusions to bind reversibly to agarose and can serve as an affinity handle for purification of the fusion. Fluorescently labeled SAVSBPM18 fusions were found to be stably immobilized on Sepharose 6B-CL. The enhanced immobilization capability of the fusion to the agarose beads results from the avidity effect mediated by the tetrameric nature of SAVSBPM18. This approach allows the consolidation of purification and immobilization of SAVSBPM18 fusions to Sepharose 6B-CL in one step for affinity matrix preparation. The resulting affinity matrix has been successfully applied to purify both SBP tagged β-lactamase and biotinylated proteins. No significant reduction in binding capacity of the column was observed for at least six months.

A Novel Streptavidin-luciferase Fusion Protein: Preparation, Properties and Application in Hybridization Analysis of DNA

A streptavidin-luciferase fusion protein comprising the thermostable mutant form of firefly luciferase Luciola mingrelica and minimal core streptavidin was constructed. The streptavidin-luciferase fusion was mainly produced in a tetrameric form with high luciferase and biotin-binding activities. It was shown that fusion has the same K_m values for ATP and luciferin and the bioluminescence spectra as initial luciferase. The linear dependence of the bioluminescence signal on the content of the fusion was observed within the range of 10^-18 -10^-13 mol per well. Successful application of obtained fusion in a biospecific bioluminescence assay based on biotin-streptavidin interactions was demonstrated by the example of a specific DNA hybridization analysis. A DNA hybridization analysis for Escherichia coli cells identification was developed using unique for these cells gadB fragment encoding glutamate decarboxylase. The amplified biotinylated GadB fragments were hybridized with the immobilized oligonucleotide probes; then, the biotin in the DNA duplexes was detected using the streptavidin-luciferase fusion protein. To reach the high sensitivity of the assay, we optimized the conditions of the assay. It was shown that the use of Pluronic for plate modification resulted in a significant reduction in the DNA detection limit which finally was 0.4 ng per well.

Targeting at the Nanoscale: A Novel S-Layer Fusion Protein Enabling Controlled Immobilization of Biotinylated Molecules

With the aim of constructing an S-layer fusion protein that combines both excellent self-assembly and specific ligand i.e., biotin binding ability, streptavidin (aa 16-133) was fused to the S-layer protein of Sporosarcina ureae ATCC 13881 (SslA) devoid of its N-terminal 341 and C-terminal 172 amino acids. The genetically engineered chimeric protein could be successfully produced in E. coli, isolated, and purified via Ni affinity chromatography. In vitro recrystallisation experiments performed with the purified chimeric protein in solution and on a silicon wafer have demonstrated that fusion of the streptavidin domain does not interfere with the self-assembling properties of the S-layer part. The chimeric protein self-assembled into multilayers. More importantly, the streptavidin domain retained its full biotin-binding ability, a fact evidenced by experiments in which biotinylated quantum dots were coupled to the fusion protein monomers and adsorbed onto the in vitro recrystallised fusion protein template. In this way, this S-layer fusion protein can serve as a functional template for the controlled immobilization of biotinylated and biologically active molecules.

Purification of CD47-streptavidin fusion protein from bacterial lysate using biotin-agarose affinity chromatography

CD47 is a widely expressed transmembrane glycoprotein that modulates the activity of a plethora of immune cells via its extracellular domain. Therefore, CD47 plays important roles in the regulation of immune responses and may serve as targets for the development of immunotherapeutic agents. To make sure CD47 functionality is intact under the process of protein conjugation, CD47-streptavidin fusion protein was expressed and purified because it can easily bind to biotin-tagged materials via the unique biotin-streptavidin affinity. In this study, gene sequences of CD47 extracellular domain (CD47ECD) and core streptavidin (coreSA) with a total 834 bp were inserted into pET20b plasmid to construct recombinant plasmid encoding CD47-SA fusion gene. After bacteria transformation, the CD47-SA fusion protein was expressed by isopropyl-β-d-thiogalactopyranoside (IPTG) induction. The collected bacteria lysate was loaded on biotinylated agarose to proceed the purification of CD47-SA fusion protein. Due to the unexpected high affinity between biotin and coreSA, standard washing and elution approaches (e.g., varying pH, using biotin, and applying guanidine hydrochloride) reported for biotin-streptavidin affinity chromatography were not able to separate the target fusion protein. Instead, using low concentration of the non-ionic detergent Triton X-100 followed with alkaline buffer could efficiently weaken the binding between biotin and coreSA, thereby eluting out CD47-SA fusion protein from the biotin agarose column. The purified CD47-SA fusion protein was further characterized by molecular biology methods and its antiphagocytic functionality was confirmed by the phagocytosis assay. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:949-958, 2016.

Probing the active site tryptophan of Staphylococcus aureus thioredoxin with an analog

Genetically encoded non-canonical amino acids are powerful tools of protein research and engineering; in particular they allow substitution of individual chemical groups or atoms in a protein of interest. One such amino acid is the tryptophan (Trp) analog 3-benzothienyl-l-alanine (Bta) with an imino-to-sulfur substitution in the five-membered ring. Unlike Trp, Bta is not capable of forming a hydrogen bond, but preserves other properties of a Trp residue. Here we present a pyrrolysyl-tRNA synthetase-derived, engineered enzyme BtaRS that enables efficient and site-specific Bta incorporation into proteins of interest in vivo. Furthermore, we report a 2.1 Å-resolution crystal structure of a BtaRS•Bta complex to show how BtaRS discriminates Bta from canonical amino acids, including Trp. To show utility in protein mutagenesis, we used BtaRS to introduce Bta to replace the Trp28 residue in the active site of Staphylococcus aureus thioredoxin. This experiment showed that not the hydrogen bond between residues Trp28 and Asp58, but the bulky aromatic side chain of Trp28 is important for active site maintenance. Collectively, our study provides a new and robust tool for checking the function of Trp in proteins.

Lentiavidins: Novel avidin-like proteins with low isoelectric points from shiitake mushroom (Lentinula edodes)

A biotin-binding protein with a low isoelectric point (pI), which minimizes electrostatic non-specific binding to substances other than biotin, is potentially valuable. To obtain such a protein, we screened hundreds of mushrooms, and detected strong biotin-binding activity in the fruit bodies of Lentinula edodes, shiitake mushroom. Two cDNAs, each encoding a protein of 152 amino acids, termed lentiavidin 1 and lentiavidin 2 were cloned from L. edodes. The proteins shared sequence identities of 27%-49% with other biotin-binding proteins, and many residues that directly associate with biotin in streptavidin were conserved in lentiavidins. The pI values of lentiavidin 1 and lentiavidin 2 were 3.9 and 4.4, respectively; the former is the lowest pI of the known biotin-binding proteins. Lentiavidin 1 was expressed as a tetrameric protein with a molecular mass of 60 kDa in an insect cell-free expression system and showed biotin-binding activity. Lentiavidin 1, with its pI of 3.9, has a potential for broad applications as a novel biotin-binding protein.

Anomalously Rapid Hydration Water Diffusion Dynamics Near DNA Surfaces

The emerging Overhauser effect dynamic nuclear polarization (ODNP) technique measures the translational mobility of water within the vicinity (5-15 Å) of preselected sites. The work presented here expands the capabilities of the ODNP technique and illuminates an important, previously unseen, property of the translational diffusion dynamics of water at the surface of DNA duplexes. We attach nitroxide radicals (i.e., spin labels) to multiple phosphate backbone positions of DNA duplexes, allowing ODNP to measure the hydration dynamics at select positions along the DNA surface. With a novel approach to ODNP analysis, we isolate the contributions of water molecules at these sites that undergo free translational diffusion from water molecules that either loosely bind to or exchange protons with the DNA. The results reveal that a significant population of water in a localized volume adjacent to the DNA surface exhibits fast, bulk-like characteristics and moves unusually rapidly compared to water found in similar probe volumes near protein and membrane surfaces. Control studies show that the observation of these characteristics are upheld even when the DNA duplex is tethered to streptavidin or the mobility of the nitroxides is altered. This implies that, as compared to protein or lipid surfaces, it is an intrinsic feature of the DNA duplex surface that it interacts only weakly with a significant fraction of the surface hydration water network. The displacement of this translationally mobile water is energetically less costly than that of more strongly bound water by up to several kBT and thus can lower the activation barrier for interactions involving the DNA surface.

Semi-synthesis of a HGF/SF kringle one (K1) domain scaffold generates a potent in vivo MET receptor agonist

The development of MET receptor agonists is an important goal in regenerative medicine, but is limited by the complexity and incomplete understanding of its interaction with HGF/SF (Hepatocyte Growth Factor/Scatter Factor). NK1 is a natural occurring agonist comprising the N-terminal (N) and the first kringle (K1) domains of HGF/SF. In the presence of heparin, NK1 can self-associate into a "head to tail" dimer which is considered as the minimal structural module able to trigger MET dimerization and activation whereas isolated K1 and N domains showed a weak or a complete lack of agonistic activity respectively. Starting from these structural and biological observations, we investigated whether it was possible to recapitulate the biological properties of NK1 using a new molecular architecture of isolated N or K1 domains. Therefore, we engineered multivalent N or K1 scaffolds by combining synthetic and homogeneous site-specifically biotinylated N and K1 domains (NB and K1B) and streptavidin (S). NB alone or in complex failed to activate MET signaling and to trigger cellular phenotypes. Importantly and to the contrary of K1B alone, the semi-synthetic K1B/S complex mimicked NK1 MET agonist activity in cell scattering, morphogenesis and survival phenotypic assays. Impressively, K1B/S complex stimulated in vivo angiogenesis and, when injected in mice, protected the liver against fulminant hepatitis in a MET dependent manner whereas NK1 and HGF were substantially less potent. These data reveal that without N domain, proper multimerization of K1 domain is a promising strategy for the rational design of powerful MET agonists.

Direct observation of multimer stabilization in the mechanical unfolding pathway of a protein undergoing oligomerization

Understanding how protein oligomerization affects the stability of monomers in self-assembled structures is crucial to the development of new protein-based nanomaterials and protein cages for drug delivery. Here, we use single-molecule force spectroscopy (AFM-SMFS), protein engineering, and computer simulations to evaluate how dimerization and tetramerization affects the stability of the monomer of Streptavidin, a model homotetrameric protein. The unfolding force directly relates to the folding stability, and we find that monomer of Streptavidin is mechanically stabilized by 40% upon dimerization, and that it is stabilized an additional 24% upon tetramerization. We also find that biotin binding increases stability by another 50% as compared to the apo-tetrameric form. We used the distribution of unfolding forces to extract properties of the underlying energy landscape and found that the distance to the transition state is decreased and the barrier height is increased upon multimerization. Finally, we investigated the origin of the strengthening by ligand binding. We found that, rather than being strengthened through intramolecular contacts, it is strengthened due to the contacts provided by the biotin-binding loop that crosses the interface between the dimers.

Structure-based design of a streptavidin mutant specific for an artificial biotin analogue

For a multistep pre-targeting method using antibodies, a streptavidin mutant with low immunogenicity, termed low immunogenic streptavidin mutant No. 314 (LISA-314), was produced previously as a drug delivery tool. However, endogenous biotins (BTNs) with high affinity (Kd < 10(-10) M) for the binding pocket of LISA-314 prevents access of exogenous BTN-labelled anticancer drugs. In this study, we improve the binding pocket of LISA-314 to abolish its affinity for endogenous BTN species, therefore ensuring that the newly designed LISA-314 binds only artificial BTN analogue. The replacement of three amino acid residues was performed in two steps to develop a mutant termed V212, which selectively binds to 6-(5-((3aS,4S,6aR)-2-iminohexahydro-1H-thieno[3,4-d]imidazol-4-yl)pentanamido)hexanoic acid (iminobiotin long tail, IMNtail). Surface plasmon resonance results showed that V212 has a Kd value of 5.9 × 10(-7) M towards IMNtail, but no binding affinity for endogenous BTN species. This V212/IMNtail system will be useful as a novel delivery tool for anticancer therapy.

Chimeric Avidin--NMR structure and dynamics of a 56 kDa homotetrameric thermostable protein

Chimeric avidin (ChiAVD) is a product of rational protein engineering remarkably resistant to heat and harsh conditions. In quest of the fundamentals behind factors affecting stability we have elucidated the solution NMR spectroscopic structure of the biotin–bound form of ChiAVD and characterized the protein dynamics through ¹⁵N relaxation and hydrogen/deuterium (H/D) exchange of this and the biotin–free form. To surmount the challenges arising from the very large size of the protein for NMR spectroscopy, we took advantage of its high thermostability. Conventional triple resonance experiments for fully protonated proteins combined with methyl–detection optimized experiments acquired at 58°C were adequate for the structure determination of this 56 kDa protein. The model–free parameters derived from the ¹⁵N relaxation data reveal a remarkably rigid protein at 58°C in both the biotin–bound and the free forms. The H/D exchange experiments indicate a notable increase in hydrogen protection upon biotin binding.

Tamavidin 2-HOT, a highly thermostable biotin-binding protein

Tamavidin 2 is a fungal tetrameric protein that binds with high affinity to biotin, like avidin and streptavidin. We replaced asparagine-115, which lies in a subunit-subunit interface of tamavidin 2, with cysteine to generate the novel, highly thermostable protein tamavidin 2-HOT. Tamavidin 2-HOT retained more than 80% of its biotin-binding activity even after incubation at 99.9°C for 60min and was fully active in 70% dimethylsulfoxide for 30min, whereas in these harsh conditions, avidin, streptavidin, and tamavidin 2 lost their activities (less than 20% of their biotin-binding activities). The Tm in which the biotin-binding activity becomes half of tamavidin 2-HOT was 105°C, at least 20°C higher than those of avidin, streptavidin, and tamavidin 2. Because a reducing agent removed the thermal stability of tamavidin 2-HOT, the N115C mutation likely created disulfide bridges that stabilized inter-subunit associations. Tamavidin 2-HOT is efficiently produced in the soluble form by Escherichia coli for practical use. The isoelectric point of tamavidin 2-HOT (7.4) is sufficiently low to reduce the chance for non-specific binding of non-target molecules due to high positive charges. Therefore, tamavidin 2-HOT may be useful in diverse novel applications that take advantage of its high biotin-binding capability that can withstand harsh conditions.

Structure-guided design of an engineered streptavidin with reusability to purify streptavidin-binding peptide tagged proteins or biotinylated proteins

Development of a high-affinity streptavidin-binding peptide (SBP) tag allows the tagged recombinant proteins to be affinity purified using the streptavidin matrix without the need of biotinylation. The major limitation of this powerful technology is the requirement to use biotin to elute the SBP-tagged proteins from the streptavidin matrix. Tight biotin binding by streptavidin essentially allows the matrix to be used only once. To address this problem, differences in interactions of biotin and SBP with streptavidin were explored. Loop3-4 which serves as a mobile lid for the biotin binding pocket in streptavidin is in the closed state with biotin binding. In contrast, this loop is in the open state with SBP binding. Replacement of glycine-48 with a bulkier residue (threonine) in this loop selectively reduces the biotin binding affinity (Kd) from 4 × 10(-14) M to 4.45 × 10(-10) M without affecting the SBP binding affinity. Introduction of a second mutation (S27A) to the first mutein (G48T) results in the development of a novel engineered streptavidin SAVSBPM18 which could be recombinantly produced in the functional form from Bacillus subtilis via secretion. To form an intact binding pocket for tight binding of SBP, two diagonally oriented subunits in a tetrameric streptavidin are required. It is vital for SAVSBPM18 to be stably in the tetrameric state in solution. This was confirmed using an HPLC/Laser light scattering system. SAVSBPM18 retains high binding affinity to SBP but has reversible biotin binding capability. The SAVSBPM18 matrix can be applied to affinity purify SBP-tagged proteins or biotinylated molecules to homogeneity with high recovery in a reusable manner. A mild washing step is sufficient to regenerate the matrix which can be reused for multiple rounds. Other applications including development of automated protein purification systems, lab-on-a-chip micro-devices, reusable biosensors, bioreactors and microarrays, and strippable detection agents for various blots are possible.

Structure-based engineering of streptavidin monomer with a reduced biotin dissociation rate

We recently reported the engineering of monomeric streptavidin, mSA, corresponding to one subunit of wild type (wt) streptavidin tetramer. The monomer was designed by homology modeling, in which the streptavidin and rhizavidin sequences were combined to engineer a high affinity binding pocket containing residues from a single subunit only. Although mSA is stable and binds biotin with nanomolar affinity, its fast off rate (koff ) creates practical challenges during applications. We obtained a 1.9 Å crystal structure of mSA bound to biotin to understand their interaction in detail, and used the structure to introduce targeted mutations to improve its binding kinetics. To this end, we compared mSA to shwanavidin, which contains a hydrophobic lid containing F43 in the binding pocket and binds biotin tightly. However, the T48F mutation in mSA, which introduces a comparable hydrophobic lid, only resulted in a modest 20-40% improvement in the measured koff . On the other hand, introducing the S25H mutation near the bicyclic ring of bound biotin increased the dissociation half life (t½ ) from 11 to 83 min at 20°C. Molecular dynamics (MD) simulations suggest that H25 stabilizes the binding loop L3,4 by interacting with A47, and protects key intermolecular hydrogen bonds by limiting solvent entry into the binding pocket. Concurrent T48F or T48W mutation clashes with H25 and partially abrogates the beneficial effects of H25. Taken together, this study suggests that stabilization of the binding loop and solvation of the binding pocket are important determinants of the dissociation kinetics in mSA.

The highly dynamic oligomeric structure of bradavidin II is unique among avidin proteins

Bradavidin II is a biotin-binding protein from Bradyrhizobium japonicum that resembles chicken avidin and bacterial streptavidin. A biophysical characterization was carried out using dynamic light scattering, native mass spectrometry, differential scanning calorimetry, and isothermal titration calorimetry combined with structural characterization using X-ray crystallography. These observations revealed that bradavidin II differs from canonical homotetrameric avidin protein family members in its quaternary structure. In contrast with the other avidins, bradavidin II appears to have a dynamic (transient) oligomeric state in solution. It is monomeric at low protein concentrations but forms higher oligomeric assemblies at higher concentrations. The crystal structure of bradavidin II revealed an important role for Phe42 in shielding the bound ligand from surrounding water molecules, thus functionally replacing the L7,8 loop essential for tight ligand binding in avidin and streptavidin. This bradavidin II characterization opens new avenues for oligomerization-independent biotin-binding protein development.

Development of a tetrameric streptavidin mutein with reversible biotin binding capability: engineering a mobile loop as an exit door for biotin

A novel form of tetrameric streptavidin has been engineered to have reversible biotin binding capability. In wild-type streptavidin, loop_3–4 functions as a lid for the entry and exit of biotin. When biotin is bound, interactions between biotin and key residues in loop_3–4 keep this lid in the closed state. In the engineered mutein, a second biotin exit door is created by changing the amino acid sequence of loop_7–8. This door is mobile even in the presence of the bound biotin and can facilitate the release of biotin from the mutein. Since loop_7–8 is involved in subunit interactions, alteration of this loop in the engineered mutein results in an 11° rotation between the two dimers in reference to wild-type streptavidin. The tetrameric state of the engineered mutein is stabilized by a H127C mutation, which leads to the formation of inter-subunit disulfide bonds. The biotin binding kinetic parameters (k_off of 4.28×10⁻⁴ s⁻¹ and K_d of 1.9×10⁻⁸ M) make this engineered mutein a superb affinity agent for the purification of biotinylated biomolecules. Affinity matrices can be regenerated using gentle procedures, and regenerated matrices can be reused at least ten times without any observable reduction in binding capacity. With the combination of both the engineered mutein and wild-type streptavidin, biotinylated biomolecules can easily be affinity purified to high purity and immobilized to desirable platforms without any leakage concerns. Other potential biotechnological applications, such as development of an automated high-throughput protein purification system, are feasible.

Dielectric spectroscopy of molecular interactions based on the avidin-biotin complex

Dielectric spectroscopy is used to probe the electrical properties of biomolecules dissolved in liquids. A 40 μl cell is constructed out of acrylic with polished, stainless steel electrodes. Experiments are performed on avidin and biotin-labeled BSA, showing characteristics of aggregation. Experiments with avidin and biotin demonstrate shifts in dielectric relaxation of the avidin associated with changes in the dipole moment and size of the molecule due to biotin binding. These shifts are analyzed in the context of biomolecular changes. These experiments demonstrate the utility of impedance spectroscopy to detect changes due to small molecules binding to proteins.

Predicting and rationalizing the effect of surface charge distribution and orientation on nano-wire based FET bio-sensors

A single charge screening model of surface charge sensors in liquids (De Vico et al., Nanoscale, 2011, 3, 706-717) is extended to multiple charges to model the effect of the charge distributions of analyte proteins on FET sensor response. With this model we show that counter-intuitive signal changes (e.g. a positive signal change due to a net positive protein binding to a p-type conductor) can occur for certain combinations of charge distributions and Debye lengths. The new method is applied to interpret published experimental data on Streptavidin (Ishikawa et al., ACS Nano, 2009, 3, 3969-3976) and Nucleocapsid protein (Ishikawa et al., ACS Nano, 2009, 3, 1219-1224).

Low-cost label-free biosensors using photonic crystals embedded between crossed polarizers

There is a strong need for low-cost biosensors to enable rapid, on-site analysis of biological, biomedical, or chemical substances. We propose a platform for label-free optical biosensors based on applying the analyte onto a surface-functionalized photonic crystal slab and performing a transmission measurement with two crossed polarization filters. This dark-field approach allows for efficient background suppression as only the photonic crystal guided-mode resonances interacting with the functionalized surface experience significant polarization rotation. We present a compact biosensor demonstrator using a low-cost light emitting diode and a simple photodiode capable of detecting the binding kinetics of a 2.5 nM solution of the protein streptavidin on a biotin-functionalized photonic crystal surface.

Transtactin: a universal transmembrane delivery system for Strep-tag II-fused cargos

The delivery of molecules into cells poses a critical problem that has to be solved for the development of diagnostic tools and therapeutic agents acting on intracellular targets. Cargos which by themselves cannot penetrate cellular membranes due to their biophysical properties can achieve cell membrane permeability by fusion to protein transduction domains (PTDs). Here, we engineered a universal delivery system based on PTD-fused Strep-Tactin, which we named Transtactin. Biochemical characterization of Transtactin variants bearing different PTDs indicated high thermal stabilities and robust secondary structures. Internalization studies demonstrated that Transtactins facilitated simple and safe transport of Strep-tag II-linked small molecules, peptides and multicomponent complexes, or biotinylated proteins into cultured human cells. Transtactin-introduced cargos were functionally active, as shown for horseradish peroxidase serving as a model protein. Our results demonstrate that Transtactin provides a universal and efficient delivery system for Strep-tag II-fused cargos.

Synthesis of polymer-biohybrids: from small to giant surfactants

Amphiphiles or surfactants, more popularly known as soaps, are among the oldest known chemical compounds used by man. Written text on a clay tablet dated to 2200 B.C. indicates that the Babylonians were familiar with soap-like substances. According to the Ebers papyrus (1550 B.C.), the ancient Egyptians bathed regularly in a mixture of animal oils, vegetable extracts, and alkaline salts, and a soap factory with bars of scented soap was found in the ruins of Pompeii (79 A.D.). In modern times, the use of soap has become universal, and we now understand reasonably well what happens when soap molecules are dispersed in aqueous solution and how the cleaning properties of soap work. The latter is related to the surface-active behavior of soap molecules, which is a result of their amphiphilic, also called amphipathic, character. Although the cleaning aspect is still an important issue, scientists are increasingly focusing on other properties of soaps, for example, self-assembling behavior and how this can be used in the design and non-covalent synthesis of new (macro)molecular architectures. These new molecules can be employed in nanotechnology and drug delivery, among other applications. This Account will focus on three different classes of amphiphiles. The first is the low molecular weight amphiphiles, also called classical amphiphiles in this context. A short overview will be given on the research carried out by our group and others on the self-assembly behavior and properties of these compounds; in particular, we focus on the ones that can be stabilized by polymerization (polymerized vesicles). Next, we will introduce the still relatively young field of superamphiphiles, macromolecules consisting of a hydrophobic and a hydrophilic polymeric block. Finally, and this constitutes the main part of this Account, we will provide an overview of a new class of amphiphiles, the so-called giant amphiphiles. These macromolecules have an enzyme or protein as the polar head group and a hydrophobic polymer as a tail. We will finish the Account with conclusions and an outlook to the future.

Tamavidins--novel avidin-like biotin-binding proteins from the Tamogitake mushroom

Novel biotin-binding proteins, referred to herein as tamavidin 1 and tamavidin 2, were found in a basidiomycete fungus, Pleurotus cornucopiae, known as the Tamogitake mushroom. These are the first avidin-like proteins to be discovered in organisms other than birds and bacteria. Tamavidin 1 and tamavidin 2 have amino acid sequences with 31% and 36% identity, respectively, to avidin, and 47% and 48% identity, respectively, to streptavidin. Unlike any other biotin-binding proteins, tamavidin 1 and tamavidin 2 are expressed as soluble proteins at a high level in Escherichia coli. Recombinant tamavidin 2 was purified as a tetrameric protein in a single step by 2-iminobiotin affinity chromatography, with a yield of 5 mg per 100 mL culture of E. coli. The kinetic parameters measured by a BIAcore biosensor indicated that recombinant tamavidin 2 binds biotin with high affinity, in a similar manner to binding by avidin and streptavidin. The overall crystal structure of recombinant tamavidin 2 is similar to that of avidin and streptavidin. However, recombinant tamavidin 2 is immunologically distinct from avidin and streptavidin. Tamavidin 2 and streptavidin are very similar in terms of the arrangement of the residues interacting with biotin, but different with regard to the number of hydrogen bonds to biotin carboxylate. Recombinant tamavidin 2 is more stable than avidin and streptavidin at high temperature, and nonspecific binding to DNA and human serum by recombinant tamavidin 2 is lower than that for avidin. These findings highlight tamavidin 2 as a probable powerful tool, in addition to avidin and streptavidin, in numerous applications of biotin-binding proteins.