Sensitive and Accurate Determination of Cobalt at Trace Levels by Slotted Quartz Tube-Flame Atomic Absorption Spectrometry Following Preconcentration with Dispersive Liquid–Liquid Microextraction

Surface-Active Ionic Liquid-Assisted Cloud Point Extraction for Pre-Concentration and Determination of Cobalt Ions in Pharmaceutical Preparations

: Herein we describe an efficient, simple, and precise micelle-mediated microextraction strategy based on the aggregation behavior of surface-active ionic liquids (SAILs) for the preconcentration and determination of cobalt ions in pharmaceutical preparations. Unlike the commonly used hydrophobic ionic liquids in IL-based microextraction methods, a water-soluble surface-active ionic liquid [1-hexadecyl 3-methylimidazolium chloride (C16MeImCl)] was used. A modified cloud point extraction (CPE) procedure based on the C16MeImCl-Triton X-114 mixed micellar system was proposed as an efficient extracting phase. A comparison of the analytical features of the extraction process with and without SAILs revealed the benefits of the proposed method. Advantages such as a wider linear range, lower detection limit, higher reproducibility, and improved extraction efficiency highlighted the proposed method over the conventional CPE method. These attractive specifications are due to the higher extraction efficiencies achieved in the presence of the SAIL and its favorable effects at the phase separation stage. Various parameters affecting the extraction efficiency were optimized by univariate and multivariate (Box-Behnken design) approaches. The calibration curve was obtained in the optimal experimental conditions with a linear range from 0.01 to 5.5 mg L-1 of cobalt ion concentration (R = 0.9992) and a detection limit of about 0.005 mg L-1. The RSD% for 10 replicate determinations of 1.0 mg L-1 Co was 0.9%. The proposed method was successfully applied to determine cobalt ions in vitamin B12 ampoules and tablets.

Efficiency enhancement of the spectrophotometric estimation of cobalt in waters and pharmaceutical preparations using dispersive liquid-liquid microextraction and microcells with long optical paths

In this paper, dispersive liquid-liquid microextraction (DLLME), long optical path microcells, and a selective chromogenic reagent were employed to improve the analytical efficiency of cobalt determination by spectrophotometry. The methodology proposed in the present study is based upon the microextraction of a cobalt(II) complex with 1-[4-[(2-hydroxynaphthalen-1-yl)methylideneamino] phenyl]ethanone (HNE) by DLLME and measurement of the absorbance of the sedimented phase using a microcell with an optical path length of 50 mm (Microcell-50). DLLME was performed using a binary mixture containing 900 μL of methanol as a dispersing solvent and 400 μL of CHCl₃ (extraction solvent) at pH 6-8 adjusted by a mixture of HCl and NaOH. The electronic spectrum of the dark brown complex recorded in the sedimented phase using Microcell-50 shows a well-defined peak at λ_max 324 ± 3 nm with a molar absorptivity of 1.08 × 10⁶ M^-1 cm^-1. Cobalt was monitored at a detection limit (LOD) of 0.08 μg L^-1 and in the linear concentration range of 0.45-10 μg L^-1, while the limit of quantitation (LOQ), relative standard deviation (RSD), and the enhancement factor (EF) were 0.264, 1.6 μgL^-1, and 223, respectively. Our method was evaluated by determining cobalt in certified reference materials and experimental samples, and the results were compared with ICP-MS measurements. Moreover, the chemical structure of the [Co(C₃₈H₂₈O₂N)₂] complex was suggested through using different characterization techniques such as Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), thermal analysis, and powder X-ray diffraction.

Developing a highly selective method for preconcentration and determination of cobalt in water and nut samples using 1-(2-pyridylazo)-2-naphthol and UV-visible spectroscopy

BACKGROUND

Heavy metal contamination in water and agricultural products is a major concern that causes risks for human health. This article describes a highly selective approach to preconcentrate cobalt(II) (Co(II)) ions based on the standard UV-visible measurement of Co(II)-1-(2-pyridylazo)-2-naphthol complex at λ = 628 nm in water and nut samples. In this method, magnetic silica (mSiO₂ ) was utilized as a practical sorbent and 1-(2-pyridylazo)-2-naphthol was employed as a complexing agent in the elution step. The adsorbent was characterized via X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy. The effects of the main variables (pH, adsorption time, sorbent amount, pH of eluent, ligand volume, and desorption time) were investigated and established.

RESULTS

The maximum recovery was achieved at pH 7 ± 0.3, adsorption time of 60 min, sorbent amount of 40 mg, eluent pH 8 ± 0.2, ligand volume of 2 mL (16.95 × 10^-4  mol L^-1 ) and desorption time of 30 min. The linearity of dynamic range (10-500 μg L^-1 ), limit of detection (0.32 μg L^-1 ), relative standard deviation (3.04%), and preconcentration factor (25) show the reliability of the method. The sorbent was reusable 12 times. Selectivity and the effect of interference ions were successfully examined. The adsorption process of Co(II) ions on mSiO₂ was investigated based on Langmuir and Freundlich isotherms. The Freundlich model was fitted with the system and the maximum capacity adsorption of mSiO₂ for Co(II) adsorption is 2.35 mg g^-1 . Then, the kinetics study revealed that the adsorption process of Co(II) ions on the mSiO₂ follows the pseudo-first-order model. The thermodynamics parameters ΔG, ΔS, and ΔH were calculated.

CONCLUSION

The method was fruitfully applied to preconcentrate Co(II) ions in water and nut samples. This method offers high selectivity and precision for determining Co(II) ions. © 2020 Society of Chemical Industry.