Determination of macro and trace elements in canned marine products by inductively coupled plasma—optical emission spectrometry (ICP-OES) and ICP—mass spectrometry (ICP-MS)

Hybrid 3D printed integrated microdevice for the determination of copper ions in human body fluids

On-site screening of copper ions in body fluid plays a critical role in monitoring human health, especially in heavy pollution areas. In this study, we have developed a hybrid 3D printed integrated microdevice for the determination of copper ions in human body fluids. A fixed and low volume of sample was detected by using the integrated microdevice without any preprocessing. The hybrid channel enables sample uniform mixing and quantitative dilution with buffer solution by inducing the “horseshoe vortex” phenomenon. The electrolytic microcell based on the flow detection system shows a more effective copper ion reaction ratio and, as a result, a better sensitivity. The simulation of the finite element method (FEM) determined the relevant optimum parameters of the hybrid channel and the microcell. The design, fabrication, and detection procedure of the integrated microdevice are here illustrated. The microdevice presented superior detection properties towards copper ions. The calibration curves covered two linear ranges varying from 20 to 100 ppb and 100 to 400 ppb, respectively. The limit of detection was estimated to be 15 ppb (S/N = 3). The relative standard deviation of the peak current measurements was 2.26%. The designed microdevice was further applied to detect copper ions in practical samples (calf serum sample and synthetic human urine sample) using a standard addition method, and the average recovery was found to be 95–104%. The performance of copper ion detection with the integrated microdevice was consistent with that of the inductively coupled plasma mass spectrometry (ICP-MS) in the same practical samples, demonstrating significant practicality in the test of body fluidics. The portable integrated microdevice is an excellent choice for on-site detection and has a promising prospect in the point-of-care testing (POCT) applications.

Essential and toxic elements in sardines and tuna on the Colombian market

The presence of metals in canned fish has been associated with adverse effects on human health. The aim of this study was to evaluate risk-based fish consumption limits based on the concentrations of eight essential elements and four elements of toxicological concern in sardines and tuna brands commercially available in the Latin American canned goods market. One brand of canned sardines and six of canned tuna were collected and evaluated by ICP-MS and direct mercury analysis. The Hg content was much higher than that previously observed in scientific literature. According to the calculated hazard quotients, all brands may present some risk in terms of this element, especially brand F in which levels up to 3.1 µg/g were measured. Sardine samples surpassed the maximum limits of Mn and As. Stricter quality control in retail chains and industries should be implemented in order to guarantee safe levels in fishery products.