Characterization of PLGA/Chitosan Electrospun Nano-Biocomposite Fabricated by Two Different Methods

Evaluation of the effects of chitosan nanoparticles on polyhydroxy butyrate electrospun scaffolds for cartilage tissue engineering applications

In this study, we synthesized and incorporated chitosan nanoparticles (Cs) into polyhydroxy butyrate (PHB) electrospun scaffolds for cartilage tissue engineering. The Cs nanoparticles were synthesized via an ionic gel interaction between Cs powder and tripolyphosphate (TPP). The mechanical properties, hydrophilicity, and fiber diameter of the PHB scaffolds with varying concentrations of Cs nanoparticles (1-5 wt%) were evaluated. The results of these evaluations showed that the scaffold containing 1 wt% Cs nanoparticles (P1Cs) was the optimum scaffold, with increased ultimate strength from 2.6 to 5.2 MPa and elongation at break from 5.31 % to 12.6 %. Crystallinity, degradation, and cell compatibility were also evaluated. The addition of Cs nanoparticles decreased crystallinity and accelerated hydrolytic degradation. MTT assay results showed that the proliferation of chondrocytes on the scaffold containing 1 wt% Cs nanoparticles were significantly higher than that on pure PHB after 7 days of cultivation. These findings suggest that the electrospun P1Cs scaffold has promising potential as a substrate for cartilage tissue engineering applications. This combination offers a promising approach for the fabrication of biomimetic scaffolds with enhanced mechanical properties, hydrophilicity, and cell compatibility for tissue engineering applications.

A New Mediterranean Flour Moth-Derived Chitosan: Characterization and Co-electrospun Hybrid Fabrication

In this study, the chitin of adult Mediterranean flour moth (Ephestia kuheniella) (Cht) was extracted and then converted to chitosan by deacetylation process to achieve the chitosan derived from E. kuheniella (Chs_fm). The new chitosan-based scaffold was produced using the polyvinyl alcohol (PVA) co-electrospinning technique. The degree of deacetylation was obtained using the distillation-titration and Fourier transform infrared spectroscopy. The surface morphology and crystallinity index of Chs_fm were observed using scanning electron microscopy and X-ray diffraction analysis, respectively, and compared with the commercial chitosan (Chs_c). Thermogravimetric analysis was used to estimate two chitosans' water content and thermal stability. The average molecular mass analysis was performed using viscometry. Moreover, the minimum inhibitory concentration and DPPH assay were used to study the antimicrobial activity and antioxidant potential of the Chs_fm, respectively. Accordingly, Chs_fm was smoother with fewer pores and flakes than Chs_c, and its crystallinity index was higher than Chs_c. The water content and thermal stability were lower and similar for Chs_fm compared to Chs_c. The average molecular mass of Chs_fm was ~ 5.8 kDa, making it classified as low molecular weight chitosan. The antimicrobial activity of Chs_fm against a representative Gram-negative bacteria; E. coli resulted to be the same as Chs_c. However, less effective than Chs_c against a representative Gram-positive bacteria is S. aureus. The Chs_fm/PVA ratio scaffold was optimized at 30:70 to fabricate a uniform nanofiber scaffold.

Dual Coating of Chitosan and Albumin Negates the Protein Corona-Induced Reduced Vascular Adhesion of Targeted PLGA Microparticles in Human Blood

Vascular-targeted carriers (VTCs) have the potential to localize therapeutics and imaging agents to inflamed, diseased sites. Poly (lactic-co-glycolic acid) (PLGA) is a negatively charged copolymer commonly used to construct VTCs due to its biodegradability and FDA approval. Unfortunately, PLGA VTCs experienced reduced adhesion to inflamed endothelium in the presence of human plasma proteins. In this study, PLGA microparticles were coated with chitosan (CS), human serum albumin (HSA), or both (HSA-CS) to improve adhesion. The binding of sialyl Lewis A (a ligand for E-selectin)-targeted PLGA, HSA-PLGA, CSPLGA, and HSA-CSPLGA to activated endothelial cells was evaluated in red blood cells in buffer or plasma flow conditions. PLGA VTCs with HSA-only coating showed improvement and experienced 35–52% adhesion in plasma compared to plasma-free buffer conditions across all shear rates. PLGA VTCs with dual coating—CS and HSA—maintained 80% of their adhesion after exposure to plasma at low and intermediate shears and ≈50% at high shear. Notably, the protein corona characterization showed increases at the 75 and 150 kDa band intensities for HSA-PLGA and HSA-CSPLGA, which could correlate to histidine-rich glycoprotein and immunoglobulin G. The changes in protein corona on HSA-coated particles seem to positively influence particle binding, emphasizing the importance of understanding plasma protein–particle interactions.

Caffeic Acid Phenethyl Ester Loaded Electrospun Nanofibers for Wound Dressing Application

Electrospinning is an advantageous method with a wide usage area, which enables the production of materials consisting of nano-thickness fibers. In this study, caffeic acid phenethyl ester (CAPE) molecule was loaded onto the poly(lactic-co-glycolic acid) (PLGA) nanofibers and obtained nanofibers were physicochemically and biologically investigated for the first time in the literature. The existence of CAPE molecules, loaded on PLGA membranes by dropping and spraying methods, was evaluated by a comparative investigation of Fourier-transform infrared (FTIR) spectra and X-Ray diffraction (XRD) patterns. Fiber morphology of the membranes was investigated by scanning electron microscope (SEM). CAPE release and swelling behaviors of the membranes were studied in vitro. The radical scavenging activity of CAPE-loaded wound dressing materials was determined by using an antioxidant assay. The antimicrobial properties of PLGA and CAPE-loaded PLGA membranes were evaluated against S. aureus, P. aeruginosa and C. albicans strains by the time-kill method. The biocompatibility study of the obtained CAPE-loaded fibers conducted on human fibroblast cell line and wound healing promoting effect of the fibers was investigated in vitro scratch assay. The results show that CAPE-loaded PLGA membranes are highly antimicrobial against all strains used in the experiment. Additionally, the results show that they are biocompatible and have wound healing properties on human fibroblasts.

Injectable chitosan/collagen hydrogels nano-engineered with functionalized single wall carbon nanotubes for minimally invasive applications in bone

Mechanical robustness is an essential consideration in the development of hydrogel platforms for bone regeneration, and despite significant advances in the field of injectable hydrogels, many fail in this regard. Inspired by the mechanical properties of carboxylated single wall carbon nanotubes (COOH-SWCNTs) and the biological advantages of natural polymers, COOH-SWCNTs were integrated into chitosan and collagen to formulate mechanically robust, injectable and thermoresponsive hydrogels with interconnected molecular structure for load-bearing applications. This study presents a complete characterisation of the structural and biological properties, and mechanism of gelation of these novel formulated hydrogels. Results demonstrate that β-glycerophosphate (β-GP) and temperature play important roles in attaining gelation at physiological conditions, and the integration with COOH-SWCNTs significantly changed the structural morphology of the hydrogels to a more porous and aligned network. This led to a crystalline structure and significantly increased the mechanical strength of the hydrogels from kPa to MPa, which is closer to the mechanical strength of the bone. Moreover, increased osteoblast proliferation and rapid adsorption of hydroxyapatite on the surface of the hydrogels indicates increased bioactivity with addition of COOH-SWCNTs. Therefore, these nano-engineered hydrogels are expected to have wide utility in the area of bone tissue engineering and regenerative medicine.

Regeneration of Rat Sciatic Nerve Using PLGA Conduit Containing Rat ADSCs with Controlled Release of BDNF and Gold Nanoparticles

Implantation of a nerve guidance conduit (NGC) carrying neuroprotective factors is promising for repairing peripheral nerve injury. Here, we developed a novel strategy for repairing peripheral nerve injury by gold nanoparticles (AuNPs) and brain-derived neurotrophic factor (BDNF)-encapsulated chitosan in laminin-coated nanofiber of Poly(l-lactide-co-glycolide) (PLGA) conduit and transplantation of rat adipose-derived stem cells (r-ADSCs) suspended in alginate. Then, the beneficial effect of AuNPs, BDNF, and r-ADSCs on nerve regeneration was evaluated in rat sciatic nerve transection model. In vivo experiments showed that the combination of AuNPs- and BDNF-encapsulated chitosan nanoparticles in laminin-coated nanofiber of PLGA conduit with r-ADSCs could synergistically facilitate nerve regeneration. Furthermore, the in vivo histology, immunohistochemistry, and behavioral results demonstrated that the AuNPs- and BDNF-encapsulated chitosan nanoparticles in NGC could significantly reinforce the repair performance of r-ADSCs, which may also contribute to the therapeutic outcome of the AuNPs, BDNF, and r-ADSCs strategies. In this study, we found that the combination of AuNPs and BDNF releases in NGC with r-ADSCs may represent a new potential strategy for peripheral nerve regeneration.

Honeycomb-like pH-responsive γ-cyclodextrin electrospun particles for highly efficient tumor therapy

We report here the tumor-implantable microparticles with a honeycomb-like porous structure. These microparticles were prepared by electrospinning using γ-cyclodextrin (γ-CD) conjugated with 3-(diethylamino)propylamine (DEAP, as a pH-responsive moiety), named γ-CD-DEAP. The resulting microparticles had pore channels (constructed using γ-CD-DEAP) extending into the deep compartment of the microparticles and allowing efficient paclitaxel (PTX, as a chemotherapeutic model drug) entrapment by a simple hole-filling encapsulation process. Importantly, the hydrophobic DEAP (at pH 7.4) in the γ-CD-DEAP microparticles changed to hydrophilic DEAP (at pH 6.8) because of its acidic pH-induced protonation. This phenomenon resulted in an acidic pH-activated particle destruction by a charge-charge repulsion between the protonated DEAP moieties and allowed a pH-triggered release of the encapsulated PTX from the collapsed microparticles. Consequently, γ-CD-DEAP microparticles implanted at the tumor site caused a significant enhancement of the in vitro/in vivo tumor cell ablation, suggesting their significant potential as a chemotherapeutic implant for tumor therapy.

3D porous collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite composite scaffolds for bone tissue engineering

In this study, we describe new collagen/functionalized multiwalled carbon nanotube/chitosan/hydroxyapatite (Col/f-MWCNT/CS/HA) composite scaffolds which were fabricated by freezing (-40 °C at 0.9 °C/min) and lyophilization (48 h, 0 °C and 200 mtorr). The compressive stresses (from 523 to 1112 kPa), swelling (from 513.9 ± 27 to 481.05 ± 25%), porosity (from 98 ± 0.15 to 95.7 ± 0.1%), contact angle (from 87.8 to 76.7°) properties examined before and after biomineralization for comparison 3D porous Col, CS, Col/f-MWCNT and Col/f-MWCNT/CS scaffolds. Biomineralization was performed by biomimetic method in concentrated SBF (10 × SBF, at 37 °C and 6.5 pH). XRD, SEM, EDS, FTIR, TGA, Optical microscopy and BET results showed that compared to Col, CS and Col/f-MWCNT scaffolds, Col/f-MWCNT/CS scaffolds had higher in vitro bioactivity, large surface area (11.746 m²/g) and a good pore volume (0.026 cc/g), interconnected porous microstructure (with 20-350 μm pore size) and incorporates the advantageous properties of both Col, f-MWCNT, CS and HA. Finally, the methyl thiazolyl tetrazolium (MTT) assay was performed to evaluate scaffolds cytotoxicity which showed that Col/f-MWCNT/CS scaffolds have the best biocompatibility.

γ-Cyclodextrin-phenylacetic acid mesh as a drug trap

In this study, we developed a nanoporous biodegradable mesh, bioinspired by the spider web, which is prepared via electrospinning using γ-cyclodextrin (γ-CD) conjugated with phenylacetic acid (PA), named γ-CDP. The resulting γ-CDP has a microfibrous or microspherical shape and contains drug trap meshlike γ-CD pores. These γ-CDP micromeshes (microspheres or microfibers) enable efficient drug capture and drug transport into deep γ-CDP nanocompartments or out of the γ-CDP web, resulting in a driving domain for a 4-week drug release. When used to deliver chemotherapeutic agents to xenografted tumors, the γ-CDP implants caused nearly complete tumor regression for 4 weeks after single administration. This strategy of a drug trap biodegradable mesh (with low density) will make drug containers uniquely attractive for the development of therapeutic implants and functional biomedical devices.

Nanobiocomposite of poly(lactide-co-glycolide)/chitosan electrospun scaffold can promote proliferation and transdifferentiation of Schwann-like cells from human adipose-derived stem cells

The transdifferentiation of human adipose-derived stem cells (ADSCs) into Schwann-like cells on biocomposite scaffolds may be a critical issue in nerve regeneration medicine. In this study, tissue-engineered scaffold with chitosan (CS) nanopowders and poly(lactide-co-glycolide) (PLGA) was investigated for its potential Schwann cells (SCs) transdifferentiation. The differentiation of human ADSCs into S-like cells was induced with different CS content and direction of nanofibers on PLGA/CS scaffolds. Cell morphology and proliferation of differentiated cells were investigated by scanning electron microscopy and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay respectively. For assessment efficiency of transdifferentiation, the expression of SC markers (glial fibrillary acidic protein and S100), and myelinogenic marker (myelin basic protein) was investigated in different nanochitosan content and direction of nanofibers scaffolds, using immunocytochemistry technique. The nanochitosan can significantly promote cell proliferation of differentiated cells (p < 0.05). The mean percentage of S-like cells on greater CS content nanofibers scaffold was significantly higher than others (p < 0.05). In addition, the align orientation of nanofibers in scaffolds guided the differentiation of ADSCs toward myelinating S-like cells on the constructs. Overall, we found that high CS content and aligned-orientation of nanofibers in biocomposite scaffold (70/30A) can promote differentiation and myelinogenic capacity of S-like cells induced from human ADSCs.