Magnetic nanomodified activated carbon: characterization and use for organic acids sorption in aqueous medium

Nanomodified bamboo (Phyllostachys aurea) biomass: its adsorbent features in the removal of dyes from water under high salinity conditions

The effluent generated by textile industries is among the most polluting to the environment. Dyes such as methylene blue (MB) and indigo blue (IB) are used in cotton dyeing. This work proposes to evaluate the potential of in natura (BIN) and nanomodified (BNP) bamboo (Phyllostachys aurea) biomass as biosorbents for the removal of MB and IB dyes in an aqueous medium under high salinity conditions. These materials were characterized by Fourier transform infrared (FTIR) and X-ray (XRD) spectroscopies and scanning electron microscopy (SEM) to investigate their morphology and interaction with the dyes and the nanoparticles. The FTIR spectra revealed the existence of hydroxyl and carbonyl groups, ethers, phenols, and aromatic compounds, indicating the presence of a lignocellulosic structure. XRD and SEM analyses confirmed the effectiveness of the nanocomposite synthesis process. The dyes were quantified by ultraviolet-visible spectroscopy (UV/Vis). The material's pH at the point of zero charge (pHPZC) was 5.52 (BIN) and 4.84 (BNP), and the best IB and MB sorption pH were 3.0 and 9.0 for BNP, respectively, employing 30 min of contact time. The material sorption capacity (Qexp) was assessed using batch procedures, in which 100-1000 mg/L dye concentrations were tested with a 0.5 g/L adsorbent dose. The dye's Qexp for BIN and BNP was 25.41 ± 0.58 and 23.42 ± 0.07 mg/g (MB) and 84.26 ± 1.1 and 130.81 ± 0.20 mg/g (IB), respectively. The kinetic model that best fit BNP experimental data was the pseudo-2nd-order with r2 = 0.99868 (MB) and r2 = 0.99873 (IB), and Freundlich, D-R, and Temkin isotherms best fit the dye sorption data. The bamboo nanomodification facilitates the biosorbent removal from the medium after sorption, enabling large-scale studies and industrial applications-the investigated materials provided promising adsorption features for removing contaminant dyes in saline water.

Adsorption of crystal violet on activated bamboo fiber powder from water: preparation, characterization, kinetics and isotherms

Biomass-activated carbon has made a great contribution as an adsorbent in the field of dye wastewater treatment. In this study, the response surface method (RSM) based on the Box-Behnken design was used to optimize the preparation process. Bamboo fiber activated carbon (BAC) with a specific surface area of 2892 m² g^-1 and a pore volume of 1.80 cm³ g^-1 was prepared. Various characterization methods (SEM, XPS, XRD, and Raman spectroscopy) were used to analyze the micro-structure of BAC. In the microscopic state, the BAC is fibrous and maintains the originally connected pores of the bamboo fiber. After high-temperature activation, the microcrystallinity of BAC decreases, and the degree of graphitization is low, indicating the presence of amorphous carbon. The adsorption capacity of BAC to crystal violet in simulated wastewater was evaluated via an adsorption experiment. Under the following conditions: the dosage of BAC was 0.04 g, the concentration was 600 mg L^-1, the adsorption temperature and time were 25 °C and 30 min, respectively, and the as-prepared BAC had a 99.96% removal rate. The adsorption process conformed to the pseudo-second-order kinetic model and Langmuir adsorption isotherm model, indicating that the adsorption process of CV on BAC belonged to monomolecular layer adsorption. The adsorption process occurs spontaneously and is accompanied by heat release, and the maximum adsorption capacity of BAC within a given concentration range could reach 1353.09 mg g^-1. SEM-EDS characterization before and after adsorption showed that ion exchange and the presence of oxygen-containing functional groups played an important role in promoting the adsorption process. The results show that BAC considerably affects CV removal, which has great application prospects.

Removal of the pesticide thiamethoxam from sugarcane juice by magnetic nanomodified activated carbon

The removal of the neonicotinoid and systemic pesticide thiamethoxam (TMX) from water and sugarcane juice by magnetic nanomodified activated carbon (AC-NP) is proposed. This adsorbent was synthesized and characterized by FTIR, XRD, and SEM, and TMX was quantified by high-performance liquid chromatography coupled to a diode array detector (HPLC-DAD). The AC-NP was efficiently synthesized using a co-precipitation method and the impregnation of magnetite (NP) in the activated carbon (AC) was assessed by the crystalline planes found in the AC-NP structure shown in the XRD diffractograms. The AC-NP FTIR analysis also indicated predominant bands of Fe-O stretching of the magnetite at 610-570 cm-1. Functional groups in AC and AC-NP were identified by absorption bands at 3550 and 1603 cm-1, characteristic of O-H and C = C, respectively. The TMX adsorption kinetics in sugarcane juice was the pseudo-second-order type with r2 = 0.9999, indicating a chemical adsorption process. The experimental sorption capacity (SCexp) for both TMX (standard) and TMX-I (insecticide) by AC-NP were 13.44 and 42.44 mg/g, respectively. Seven non-linear isotherm models (Langmuir, Freundlich, Dubinin-Radushkevich, Toth, Hill, Sips, and Redlich-Peterson) were fitted to the experimental adsorption data of TMX and TMX-I by AC-NP. Considering the standard error (SE), Freundlich, Langmuir, and Sips were the most appropriate models to describe the TMX adsorption, and Hill's best adjusted to TMX-I experimental data. The chromatographic method was highly satisfactory due to its high selectivity and recovery (91-103%). The efficiency of AC-NP in the sorption of TMX was confirmed by the excellent values of SCexp and sorption kinetics.

Nanomodified sugarcane bagasse biosorbent: synthesis, characterization, and application for Cu(II) removal from aqueous medium

Biosorption is a technique widely used in the remediation of contaminated effluents, and its main advantages are its easy applicability, high efficiency rate, versatility, and its economic viability. Associated with nanotechnology, this work proposes the use of nanocomposites of sugarcane bagasse (SB) and ferromagnetic nanoparticles (Fe₃O₄) in the removal of metallic ions present in contaminated water. SB is a promising adsorbent material since it is an abundant agricultural residue, easily accessed. By using the coprecipitation method, two nanocomposites were obtained from in natura (SB-NP) or acid-treated (MSB-NP) sugarcane bagasse. These materials were synthetized by impregnation of Fe₃O₄ to gain paramagnetic properties and to facilitate the removal of the contaminant-containing adsorbent. The characterization of the nanocomposites was performed using pH_PCZ, FTIR, XRD, and SEM/EDS techniques, to evaluate the synthesis efficiency and investigate the morphology of the materials. The efficiency of magnetite impregnation on the SB was assessed by SEM/EDS and XRD, while the main functional groups (carbonyl, carboxyl, hydroxyl, amine, amide, and nitrate) responsible for adsorption were found by FTIR. In the surface charge characterization by pH_PCZ sorption of dyes, it was found that negative charges are predominant. The pH_PCZ for SB-NP and MSB-NP was 5.95 and 5.59, respectively, and the chosen Cu(II) adsorption pH was 6.2 ± 0.1. The adsorption equilibrium was reached between 10 and 60 min of contact time. The maximum experimental sorption capacity (SC_exp) was 2.53 ± 0.09 (SB-NP) and 2.61 ± 0.01 mg/g (MSB-NP). The isotherm models applied to the experimental data were Langmuir, Freundlich, Sips, Temkin, and Dubinin-Radushkevich, and Temkin best described the adsorption phenomena for Cu(II) by SB-NP (r² = 0.9976 and χ² = 3.965) and MSB-NP (r² = 0.9990 and χ² = 1.816). Reuse cycles of the nanocomposites were also performed employing ten cycles of sorption using 50 mg/L Cu(II) solutions, after which the materials showed SC_exp = 7.47 ± 0.04 mg/g (SB-NP) and 7.82 ± 0.04 mg/g (MSB-NP). Therefore, the investigated materials exhibited promising results to be used as biosorbents in the remediation of effluents contaminated with toxic metal ions, such as copper.