First direct evidence of size-dependent structural transition in nanosized nickel particles

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Structure Sensitivity of CO2 Hydrogenation on Ni Revisited

Despite the large number of studies on the catalytic hydrogenation of CO2 to CO and hydrocarbons by metal nanoparticles, the nature of the active sites and the reaction mechanism have remained unresolved. This hampers the development of effective catalysts relevant to energy storage. By investigating the structure sensitivity of CO2 hydrogenation on a set of silica-supported Ni nanoparticle catalysts (2-12 nm), we found that the active sites responsible for the conversion of CO2 to CO are different from those for the subsequent hydrogenation of CO to CH4. While the former reaction step is weakly dependent on the nanoparticle size, the latter is strongly structure sensitive with particles below 5 nm losing their methanation activity. Operando X-ray diffraction and X-ray absorption spectroscopy results showed that significant oxidation or restructuring, which could be responsible for the observed differences in CO2 hydrogenation rates, was absent. Instead, the decreased methanation activity and the related higher CO selectivity on small nanoparticles was linked to a lower availability of step edges that are active for CO dissociation. Operando infrared spectroscopy coupled with (isotopic) transient experiments revealed the dynamics of surface species on the Ni surface during CO2 hydrogenation and demonstrated that direct dissociation of CO2 to CO is followed by the conversion of strongly bonded carbonyls to CH4. These findings provide essential insights into the much debated structure sensitivity of CO2 hydrogenation reactions and are key for the knowledge-driven design of highly active and selective catalysts.

Low temperature in situ immobilization of nanoscale fcc and hcp polymorphic nickel particles in polymer-derived Si-C-O-N(H) to promote electrocatalytic water oxidation in alkaline media

We synthesized nickel (Ni) nanoparticles (NPs) in a high specific surface area (SSA) p-block element-containing inorganic compound prepared via the polymer-derived ceramics (PDC) route to dispatch the obtained nanocomposite towards oxygen evolution reaction (OER). The in situ formation of Ni NPs in an amorphous silicon carboxynitride (Si-C-O-N(H)) matrix is allowed by the reactive blending of a polysilazane, NiCl2 and DMF followed by the subsequent thermolysis of the Ni : organosilicon polymer coordination complex at a temperature as low as 500 °C in flowing argon. The final nanocomposite displays a BET SSA as high as 311 m2 g-1 while the structure of the NPs corresponds to face-centred cubic (fcc) Ni along with interstitial-atom free (IAF) hexagonal close-packed (hcp) Ni as revealed by XRD. A closer look into the compound through FEG-SEM microscopy confirms the formation of pure metallic Ni, while HR-TEM imaging reveals the occurrence of Ni particles featuring a fcc phase and surrounded by carbon layers; thus, forming core-shell structures, along with Ni NPs in an IAF hcp phase. By considering that this newly synthesized material contains only Ni without doping (e.g., Fe) with a low mass loading (0.15 mg cm-2), it shows promising OER performances with an overpotential as low as 360 mV at 10 mA cm-2 according to the high SSA matrix, the presence of the IAF hcp Ni NPs and the development of core-shell structures. Given the simplicity, the flexibility, and the low cost of the proposed synthesis approach, this work opens the doors towards a new family of very active and stable high SSA nanocomposites made by the PDC route containing well dispersed and accessible non-noble transition metals for electrocatalysis applications.

Extreme structural stability of Ti0.5Sn0.5O2 nanoparticles: synergistic effect in the cationic sublattice

Ti_0.5Sn_0.5O₂ nanoparticles (∼5 nm and ∼10 nm) have been studied under high pressure by Raman spectroscopy. For particles with diameter ∼10 nm, a transformation has been observed at 20-25 GPa while for particles with ∼5 nm diameter no phase transition has been observed up to ∼30 GPa. The Ti_0.5Sn_0.5O₂ solid solution shows an extended stability at the nanoscale, both of its cationic and anionic sublattices. This ultrastability originates from the contribution of Ti and Sn mixing: Sn stabilizes the cationic network at high pressure and Ti ensures a coupling between the cationic and anionic sublattices. This result questions a "traditional" crystallographic description based on polyhedra packing and this synergistic effect reported in this work is similar to the case of metamaterials but at the nanoscale.

Applicability of Nickel-Based Catalytic Systems for Hydrodehalogenation of Recalcitrant Halogenated Aromatic Compounds

This review summarizes recent applications of nickel as a nonprecious metal catalyst in hydrodehalogenation (HDH) reactions of halogenated aromatic compounds (Ar–Xs). Nickel-based HDH catalysts were developed for reductive treatment of both waste containing concentrated Ar–Xs (mainly polychlorinated benzenes) and for wastewater contaminated with Ar–Xs. Ni-catalyzed HDH enables the production of corresponding nonhalogenated aromatic products (Ar–Hs), which are principally further applicable/recyclable and/or Ar–Hs, which are much more biodegradable and can be mineralized during aerobic wastewater treatment. Developed HDH methods enable the utilization of both gaseous hydrogen via the direct HDH process or other chemical reductants as a source of hydrogen utilized in the transfer of the hydrodehalogenation process. This review highlights recent and major developments in Ni-catalyzed hydrodehalogenation topic since 1990.

Lithium Hydride Mediated Nickel(0) Catalysed Biaryl Synthesis from Aryl Chlorides and Bromides

Lithium hydride is efficiently used as a reducing agent in the ligated Ni0 catalysed homocoupling of aryl bromides and chlorides.

Surface and interface design for heterogeneous catalysis

Recent progresses in catalytic nanocrystals with uniform and well-defined structures, in situ characterization techniques, and theoretical calculations are facilitating the innovation of efficient catalysts via surface and interface designs, including crystal phase design, morphology/facet design, and size design, followed by controlled synthesis.

Hexagonal close-packed structure of au nanocatalysts solidified after ge nanowire vapor-liquid-solid growth

We report that approximately 10% of the Au catalysts that crystallize at the tips of Ge nanowires following growth have the close-packed hexagonal crystal structure rather than the equilibrium face-centered-cubic structure. Transmission electron microscopy results using aberration-corrected imaging, and diffraction and compositional analyses, confirm the hexagonal phase in these 40-50 nm particles. Reports of hexagonal close packing in Au, even in nanoparticle form, are rare, and the observations suggest metastable pathways for the crystallization process. These results bring new considerations to the stabilization of the liquid eutectic alloy at low temperatures that allows for vapor-liquid-solid growth of high quality, epitaxial Ge nanowires below the eutectic temperature.

Synthesis of Fine Nickel Powders by Solvothermal Method

Fine nickel powders have been prepared by chemical reduction between nickel acetate and alcohol under solvothermal conditions. The effect of adding surfactant and varying solvent on the particle size of the as-synthesized nickel powders have been explored. SEM, XRD and TG were employed to characterize the size, morphology, crystalline structure and the thermal stability of the as-synthesized nickel powders. It is revealed that the FCC-structured nickel powders are of uniform spherical shape with good crystallinity and thermal stability. Typically, nickel powders with an average size of 300 nm were obtained at 200°C for 8 h using 0.04 mol/L solution of Ni(CH3COO)2·4H2O in n-butyl alcohol under solvothermal conditions.

Comparison of the Magnetic Properties of Metastable Hexagonal Close-Packed Ni Nanoparticles with Those of the Stable Face-Centered Cubic Ni Nanoparticles

We report the first magnetic study of pure and metastable hexagonal close-packed (hcp) Ni nanoparticles (sample 1). We also produced stable face-centered cubic (fcc) Ni nanoparticles, as mixtures with the hcp Ni nanoparticles (samples 2 and 3). We compared the magnetic properties of the hcp Ni nanoparticles with those of the fcc Ni nanoparticles by observing the evolution of magnetic properties from those of the hcp Ni nanoparticles to those of the fcc Ni nanoparticles as the number of fcc Ni nanoparticles increased from sample 1 to sample 3. The blocking temperature (T(B)) of the hcp Ni nanoparticles is approximately 12 K for particle diameters ranging between 8.5 and 18 nm, whereas those of the fcc Ni nanoparticles are 250 and 270 K for average particle diameters of 18 and 26 nm, respectively. The hcp Ni nanoparticles seem to be antiferromagnetic for T < T(B) and paramagnetic for T > T(B). This is very different from the fcc Ni nanoparticles, which are ferromagnetic for T < T(B) and superparamagnetic for T > T(B). This unusual magnetic state of the metastable hcp Ni nanoparticles is likely related to their increased bond distance (2.665 angstroms), compared to that (2.499 angstroms) of the stable fcc Ni nanoparticles.