Highly efficient removal of Cu(II), Cd(II) and Pb(II) by carboxyl-modified multi-porous biochar

Adsorption characteristics and mechanism of novel ink melanin composite modified chitosan for Cd(II) in water

In this study, chitosan (CS), carboxymethyl chitosan (CMCS), and chitosan quaternary ammonium salt (HACC) were successfully loaded with ink melanin (ME) as efficient adsorbents for Cd(II) removal. The results of batch adsorption experiments and structural characterization showed that the modified CS loaded with ME improved the adsorption capacity of the composites for Cd(II). The pseudo-second-order kinetic and Langmuir equations were better suited to describe the batch adsorption experiments. The adsorption of Cd(II) was chemisorption with desirable adsorption effect when the concentration of the three composites was 0.5 mg/mL and the pH value was neutral. Among them, HACC-ME demonstrated remarkable Cd(II) adsorption performance (107.18 mg/g) and sustained an 85 % efficiency in Cd(II) removal over five adsorption-desorption cycles. Ion exchange, complexation, electrostatic attraction, and hydrophobic interaction were the primary mechanisms for Cd(II) removal. Overall, HACC-ME could be employed as a low-cost and highly efficient new natural adsorbent material for the removal of Cd(II) ions from wastewater. These findings illuminate pathways for the development of efficient and novel natural adsorbent materials for environmental cleanup purposes.

Mechanism of clay mineral modified biochar simultaneously immobilizes heavy metals and reduces soil carbon emissions

Heavy metal pollution in farmland soil has become increasingly severe, and multi-element composite pollution has brought enormous harm to human production and life. Environmental changes in cold regions (such as freeze-thaw cycles and dry-wet alternations) may increase the potential physiological toxicity of heavy metals and exacerbate pollution risks. In order to reveal the effectiveness of sepiolite modified biochar in the remediation of the soil contaminated with lead (Pb), cadmium (Cd), and chromium (Cr), the rice husk biochar pyrolyzed at 500 and 800 °C were selected for remediation treatment (denoted as BC500 and BC800). Meanwhile, different proportions of sepiolite were used for modification (biochar: sepiolite = 1: 0.5 and 1: 1), denoted as MBC500/MBC800 and HBC500/HBC800, respectively. The results showed that modified biochar with sepiolite can effectively improve the immobilization of heavy metals. Under natural conservation condition, the amount of diethylenetriaminepentaacetic acid (DTPA) extractable Pb in BC500, MBC500, and HBC500 decreased by 5.95, 12.39, and 13.55%, respectively, compared to CK. Freeze-thaw cycles and dry-wet alternations activated soil heavy metals, while modified biochar increased adsorption sites and oxygen-containing functional groups under aging conditions, inhibiting the fractions transformation of heavy metals. Furthermore, freeze-thaw cycles promoted the decomposition and mineralization of soil organic carbon (SOC), while sepiolite hindered the release of active carbon through ion exchange and adsorption complexation. Among them, and the soil dissolved organic carbon (DOC) content in HBC800 decreased by 49.39% compared to BC800. Additionally, the high-temperature pyrolyzed biochar (BC800) enhanced the porosity richness and alkalinity of material, which effectively inhibited the migration and transformation of heavy metals compared to BC500, and reduced the decomposition of soil DOC.

Efficient removal of Cd(II) and Pb(II) from aqueous solution using biochars derived from food waste

Massive amount of food waste has been generated annually, posing a threat to ecological sustainability and the social economy due to current disposal methods. Urgent action is needed worldwide to convert the traditional pathway for treating food waste into a sustainable bioeconomy, as this will significantly benefit food chain management. This study explores the use of pyrolysis to produce different types of food waste biochars and investigates their adsorption capabilities for removing Cd2+ and Pb2+ in aqueous solution. The results indicated that co-pyrolysis biochar from fresh food waste and rice husk (FWRB) exhibited superior adsorption performance for Cd2+ (61.84 mg·g-1) and Pb2+ (245.52 mg·g-1), respectively. Pseudo-second-order kinetics (0.74 ≤ R2 ≤ 0.98) and Langmuir isotherms (0.87 ≤ R2 ≤ 0.98) indicated that the immobilized Cd2+ and Pb2+ on biochars were mainly attributed to the chemisorption, including precipitation with minerals (e.g., carbonates, silicates, and phosphate), complexation with functional groups (-OH), cation exchange (-COO-), and coordination with π-electrons. Furthermore, FWRB demonstrated reduced EC and Na content in comparison to food waste digestate biochar (FWDB) and food waste digestate co-pyrolysis with sawdust biochar (FWSB), with levels of Cd and Pb falling below China's current guideline thresholds. These findings suggested that co-pyrolysis of fresh food waste with rice husk could be applicable to the recycling of food waste into biochar products for heavy metal stabilization in contaminated water and soils.

Amine-functionalized magnetic biochars derived from invasive plants Alternanthera philoxeroides for enhanced efficient removal of Cr(VI): performance, kinetics and mechanism studies

In this study, novel magnetic biochars derived from Alternanthera philoxeroides and modified by different amines (hexanediamine, melamine, and L-glutathione) were successfully prepared by hydrothermal carbonization and employed as an efficient adsorbent for Cr(VI). When pH = 2.0, T = 25 °C, c₀ = 100 mg/L, and the dosage of biochars is 0.05 g, the maximum adsorption capacity of Cr(VI) by pristine biochar (BAP) was 42.47 mg/g and modified biochars (MFBAP, MEBAP, LBAP) was 80.58, 62.26, and 55.66 mg/g, respectively. It was found that hexanediamine and melamine could enhance the S_BET of biochars, while L-glutathione could reduce its S_BET, which could be supported by BET measurement and SEM images. Adsorption kinetics and isotherm studies showed that the Cr(VI) adsorption process of MFBAP followed Elovich kinetic model and Langmuir isotherm, respectively, which means that it was mainly a chemical adsorption process. The characterization results proved that -NH₂ derived from amines plays a significant role in removing Cr(VI), which is mainly degraded by complexation reaction, electrostatic interaction, and reduction. In sum, the biochar modified by amines has excellent Cr(VI) adsorption performance, highly enhanced S_BET, and excellent recyclability, which is a promising candidate for solving the problem of invasive plants and wastewater treatment.

Simultaneous Removal of Antibiotics and Heavy Metals with Poly(Aspartic Acid)-Based Fenton Micromotors

The discharge of diverse pollutants has led to a complex water environment and posed a huge health threat to humans and animals. Self-propelled micromotors have recently attracted considerable attention for efficient water remediation due to their strong localized mass transfer effect. However, a single functionalized component is difficult to tackle with multiple contaminants and requires to combine different decontamination effects together. Here, we introduced a multifunctional micromotor to implement the adsorption and degradation roles simultaneously by integrating the poly(aspartic acid) (PASP) adsorbent with a MnO₂ -based catalyst. The as-prepared micromotors are well propelled in contaminated waters by MnO₂ catalyzing hydrogen peroxide. In addition, the catalytic ramsdellite MnO₂ (R-MnO₂ ) inner layer is decorated with Fe₂ O₃ nanoparticles to improve their catalytic performance, contributing to an excellent degradation ability with 90% tetracycline (TC) removal in 50 minutes by enhanced Fenton-like reactions. Combining the attractive adsorption capability of poly (aspartic acid) (PASP), the composite micromotors offer an efficient removal of heavy metal ions in short time. Moreover, the designed micromotors are able to simultaneously remove antibiotic and heavy metals in mixed contaminants circumstance just in single treatment. This multifunctional micromotor with distinctive decontamination ability exhibits a promising prospective in treating multiple pollutants in the future.

Facile preparation of sulfonated biochar for highly efficient removal of toxic Pb(II) and Cd(II) from wastewater

Biochar is deemed as the ideal material for the effective removal of heavy metals in wastewater treatment. Herein, we developed a facile one-step solvothermal method for the preparation of sulfonated biochar (SBC) from Axonopus compressus under a low-temperature condition. FTIR and XPS analysis demonstrate that plenty of -OH, -COOH and -SO₃H moieties are generated on the surface of SBC during the sulfonation process. Due to high electronegativity and strong complexation of these moieties, SBC can rapidly adsorb Pb(II) and Cd(II) with capacities of 191.07 and 85.76 mg/g respectively within 5 min. SBC can be reused for 5 cycles with a negligible loss of adsorption capacity. In addition, different biomass-based biochars are prepared under the identical experimental conditions, and they are successfully applied in the treatments of Pb(II) and Cd(II). The satisfying results indicate that one-step low-temperature sulfonation could be a universal method, and various types of biomass waste could be the abundant, effective, economical material source for the treatment of environmental heavy metal pollution in future.

Facile Synthesis of Cauliflower Leaves Biochar at Low Temperature in the Air Atmosphere for Cu(II) and Pb(II) Removal from Water

In this study, a facile and low-cost method for biochar (CLB) preparation from vegetable waste (cauliflower leaves) was developed at a low temperature (120 °C) in the air atmosphere. The prepared mechanism, adsorption mechanism, and performance of CLB for Cu(II) and Pb(II) sorption were investigated using Scanning electron microscopy- energy dispersive X-ray spectroscopy(SEM-EDS), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FTIR), and a series of sorption experiments. Then the CLB was subjected to single and double element sorption studies to examine the effect of pH value on the Cu(II)/Pb(II) sorption capacities and then competitive sorption priority. There are both more hydroxyl (–OH) and carboxyl (–COOH) functional groups on the surface of CLB compared to those from control (without H₃PO₄ impregnation), resulting in more ion exchanges and complexation reaction for CLB with Cu(II) and Pb(II). Besides, the phosphorus-containing groups (e.g., P = OOH, P = O.), which newly formed with H₃PO₄ impregnation, could also enhance sorption, especially for Pb(II), this way leaded to its adsorption and precipitation as Pb₅(PO₄)₃OH crystals. The performance of maximum adsorption capacities of CLB toward Cu(II) and Pb(II) were 81.43 and 224.60 mg/g, respectively. This sorption was slightly pH-dependent, except that the sorption capacity improved significantly as the pH value of the solution increased from 2 to 4. Competitive sorption experiment confirmed that Pb(II) had a higher sorption priority than Cu(II).