Separation and identification of heterocyclic nitrogen compounds in biooil derived by fast pyrolysis of chicken manure

Characteristics and liming potential of biochar types from potato waste and pine-bark

Large amount of wastes are burnt or left to decompose on site or at landfills where they cause air pollution and nutrient leaching to groundwater. Waste management strategies that return these food wastes to agricultural soils recover the carbon and nutrients that would otherwise have been lost, enrich soils and improve crop productivity. This study characterised biochar produced by pyrolysis of potato peels (PP), cull potato (CP) and pine bark (PB) at 350 and 650°C. The biochar types were analysed for pH, phosphorus (P) and other elemental composition. Proximate analysis was done following ASTM standard 1762-84, while surface functional groups and external morphology characteristics were determined using FTIR and SEM; respectively. Pine bark biochar had higher yield and fixed carbon (FC), and lower ash content and volatile matter than biochar types from potato wastes. The liming potential of CP 650°C is greater than that of PB biochars. Biochar types from potato waste had more functional groups even at high pyrolysis temperature relative to pine bark. Potato waste biochars showed an increase in pH, calcium carbonate equivalent (CCE), K and P content with increasing pyrolysis temperature. These findings imply that biochar from potato waste may be valuable for soil C storage, remediating acidity and increasing availability of nutrients especially K and P in acidic soils.

Sequential Extraction and Characterization of Nitrogen Compounds after Hydrothermal Liquefaction of Sewage Sludge

Organic solid wastes such as sewage sludge are potential feedstocks for the production of drop-in biofuels. Hydrothermal liquefaction (HTL) is a process that converts the wet sewage sludge into an organic biocrude. To fulfill industrial fuel standards, the considerable heteroatom content of the biocrude needs to be lowered by downstream processes. Nitrogen (N) contained in several compounds poses a challenge and yet, the complex chemical composition of HTL-biocrude samples has hindered detailed analysis and understanding. In particular, N-containing aromatic substances appear very persistent in biocrude. In the present work, two alkaline (NaHCO₃ and NaOH) and one acidic (HCL) aqueous solutions were subsequently applied to extract and recover polar N-containing compounds from the biocrude matrix with an N-content of 3.8 wt %. Gas chromatography-mass spectrometry, atmospheric pressure chemical ionization in positive mode, and Fourier transform ion cyclotron resonance mass spectrometry were applied for their characterization and results show that a large share of N-compounds with an aromatic, pyridinic structure was found in the acidic extracted fraction with an N-content of 9.5 wt %. Aliphatic N-compounds were less affected by the separation and ended in the residual fraction. N-compounds with multiple oxygen functionalizations are enriched in the alkaline extracted fractions. This showed that N-compounds with an aromatic structure are strongly affected by polar groups and can potentially be extracted by downstream processes with appropriate solvents.

Adsorption Removal of 17β-Estradiol from Water by Rice Straw-Derived Biochar with Special Attention to Pyrolysis Temperature and Background Chemistry

Rice straw biochar that produced at three pyrolysis temperatures (400, 500 and 600 °C) were used to investigate the adsorption properties of 17β-estradiol (E2). The biochar samples were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), elemental analysis and BET surface area measurements. The influences of pyrolysis temperature, E2 concentration, pH, ionic strength, background electrolyte and humic acid were studied. Kinetic and isotherm results illustrated that the adsorption process could be well described by pseudo-second-order and Freundlich models. Experimental results showed that ionic strength had less influence on the adsorption of E2 by 500 and 600 °C rice straw biochar. Further, multivalent ions had positive impact on E2 removal than monovalent ions and the influence of the pyrolysis temperature was unremarkable when background electrolyte existed in solutions. The adsorption capacity of E2 decreased with the pH ranged from 3.0 to 12.0 and the humic acid concentration from 2 to 10 mg L⁻¹. Electrostatic attractions and π-π interaction were involved in the adsorption mechanisms. Compared to low-temperature biochar, high-temperature biochar exhibited a better adsorption capacity for E2 in aqueous solution, indicated it had a greater potential for E2 pollution control.

Effect of Temperature on the Structural and Physicochemical Properties of Biochar with Apple Tree Branches as Feedstock Material

The objective of this study was to study the structure and physicochemical properties of biochar derived from apple tree branches (ATBs), whose valorization is crucial for the sustainable development of the apple industry. ATBs were collected from apple orchards located on the Weibei upland of the Loess Plateau and pyrolyzed at 300, 400, 500 and 600 °C (BC300, BC400, BC500 and BC600), respectively. Different analytical techniques were used for the characterization of the different biochars. In particular, proximate and element analyses were performed. Furthermore, the morphological, and textural properties were investigated using scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, Boehm titration and nitrogen manometry. In addition, the thermal stability of biochars was also studied by thermogravimetric analysis. The results indicated that the increasing temperature increased the content of fixed carbon (C), the C content and inorganic minerals (K, P, Fe, Zn, Ca, Mg), while the yield, the content of volatile matter (VM), O and H, cation exchange capacity, and the ratios of O/C and H/C decreased. Comparison between the different samples show that highest pH and ash content were observed in BC500. The number of acidic functional groups decreased as a function of pyrolysis temperature, especially for the carboxylic functional groups. In contrast, a reverse trend was found for the basic functional groups. At a higher temperature, the brunauer–emmett–teller (BET) surface area and pore volume are higher mostly due to the increase of the micropore surface area and micropore volume. In addition, the thermal stability of biochars also increased with the increasing temperature. Hence, pyrolysis temperature has a strong effect on biochar properties, and therefore biochars can be produced by changing pyrolysis temperature in order to better meet their applications.

Gas Chromatography/Atmospheric Pressure Chemical Ionization-Fourier Transform Ion Cyclotron Resonance Mass Spectrometry of Pyrolysis Oil from German Brown Coal

Pyrolysis oil from the slow pyrolysis of German brown coal from Schöningen, obtained at a temperature of 500°C, was separated and analyzed using hyphenation of gas chromatography with an atmospheric pressure chemical ionization source operated in negative ion mode and Fourier transform ion cyclotron resonance mass spectrometry (GC-APCI-FT-ICR-MS). Development of this ultrahigh-resolving analysis method is described, that is, optimization of specific GC and APCI parameters and performed data processing. The advantages of GC-APCI-FT-ICR-MS hyphenation, for example, soft ionization, ultrahigh-resolving detection, and most important isomer separation, were demonstrated for the sample liquid. For instance, it was possible to separate and identify nine different propylphenol, ethylmethylphenol, and trimethylphenol isomers. Furthermore, homologous series of different acids, for example, alkyl and alkylene carboxylic acids, were verified, as well as homologous series of alkyl phenols, alkyl dihydroxy benzenes, and alkoxy alkyl phenols.

Wheat straw biomass: a resource for high-value chemicals

Two methods are proposed for increasing the commercial value of wheat straw based on its chemical constituents. The first method involves the determination and extraction of the major organic components of wheat straw, and the second involves those found and extracted in the aqueous and viscous biooils derived from the straw by fast pyrolysis. We used pyrolysis-field ionization mass spectrometry to identify the fine chemicals, which have high commercial values. The most abundant organic compounds in the wheat straw and biooil used as precursors for green chemicals are N-heterocycles (16 to 29% of the Total Ion Intensities, TII) and fatty acids (19 to 26% of TIIs), followed by phenols and lignins (12 to 23% of TIIs). Other important precursors were carbohydrates and amino acids (1 to 8% TIIs), n-alkyl benzenes (3 to 5% of TIIs), and diols (4 to 9% TIIs). Steroids and flavonoids represented 1 to 5% of TIIs in the three materials. Examples of valuable chemical compounds that can be extracted from the wheat straw and biooils are m/z 256, 270, 278, 280, 282 and 284, which are the n-C16 and n-C17 fatty acids respectively, and the C18:3, C18:2 and C18:1 unsaturated fatty acids. In particular, the C18:2 (linoleic acid) is present at a concentration of 1.7% of TIIs. Pyrazole, pyrazine, pyridine, indoles, quinolines, carbazoles, and their identified derivatives are found in relatively high concentrations (1 to 8% of TIIs). Other useful compounds are sterols such as m/z 412 (stigmasterol), m/z 414 (β-sitosterol), and steroids such m/z 394 (stigmastatriene), m/z 398 (stigmastene) and m/z 410 (stigmastadienone). Relative to the wheat straw, the relative concentration of all flavonoids such as m/z 222 (flavone) and m/z 224 (flavonone) doubled in the biooils. The conversion of wheat straw by fast pyrolysis, followed by chemical characterization with mass spectrometry, and extraction of fine chemicals, opens up new possibilities for increasing the monetary value of crop residues.

Impact of pyrolysis temperature and manure source on physicochemical characteristics of biochar

While pyrolysis of livestock manures generates nutrient-rich biochars with potential agronomic uses, studies are needed to clarify biochar properties across manure varieties under similar controlled conditions. This paper reports selected physicochemical results for five manure-based biochars pyrolyzed at 350 and 700°C: swine separated-solids; paved-feedlot manure; dairy manure; poultry litter; and turkey litter. Elemental and FTIR analyses of these alkaline biochars demonstrated variations and similarities in physicochemical characteristics. The FTIR spectra were similar for (1) turkey and poultry and (2) feedlot and dairy, but were distinct for swine biochars. Dairy biochars contained the greatest volatile matter, C, and energy content and lowest ash, N, and S contents. Swine biochars had the greatest P, N, and S contents alongside the lowest pH and EC values. Poultry litter biochars exhibited the greatest EC values. With the greatest ash contents, turkey litter biochars had the greatest biochar mass recoveries, whereas feedlot biochars demonstrated the lowest.