New developments in anti-biofilm intervention towards effective management of orthopedic device related infections (ODRI's)

Insights into the microbiological and virulence characteristics of bacteria in orthopaedic implant infections: A study from Pakistan

The exponential increase in the prevalence of multidrug resistant bacteria has resulted in limiting surgical treatment options globally, potentially causing biofilm-related complications, implant failure, and severe consequences. This study aims to isolate and characterize bacteria from post-surgical orthopaedic implant infections and screening for multiple antibiotic resistance. A cross-sectional study was conducted, involving isolation of forty-four dominant pathogenic bacterial isolates from 16 infected implant samples from across Islamabad and Rawalpindi. Out of forty-four, 38% cocci and 61% bacilli were obtained. Approximately 90% of isolates showed multiple antibiotic resistance (MAR) index of more than 0.2. Eleven strains were identified via 16S rRNA gene sequencing as Pseudomonas aeruginosa, Bacillus spp., Planococcus chinensis, Staphylococcus, Escherichia coli and Enterobacter cloacae. The bacterial strain E. coli MB641 showed sensitivity to Polymyxin only, and was resistant to all other antibiotics used. Maximum biofilm forming ability 0.532 ± 0.06, 0.55 ± 0.01 and 0.557 ± 0.07 was observed in Pseudomonas aeruginosa MB663, Pseudomonas aeruginosa MB664 and Bacillus spp. MB647 respectively after 24 hours of incubation. EPS production of bacterial strains was assessed, the polysaccharides and protein content of EPS were found to be in the range of 11-32 μg/ml and 2-10 μg/ml, respectively. Fourier transform infrared spectroscopic analysis of EPS showed the presence of carbohydrates, proteins, alkyl halides, and nucleic acids. X-ray diffraction analysis revealed crystalline structure of EPS extracted from biofilm forming bacteria. These findings suggest a high prevalence of antibiotic-resistant bacteria in orthopaedic implant-associated surgeries, highlighting the urgent need for ongoing monitoring and microorganism testing in infected implants.

Local Antibiotic Delivery Options in Prosthetic Joint Infection

Prosthetic Joint Infection (PJI) causes significant morbidity and mortality for patients globally. Delivery of antibiotics to the site of infection has potential to improve the treatment outcomes and enhance biofilm eradication. These antibiotics can be delivered using an intra-articular catheter or combined with a carrier substance to enhance pharmacokinetic properties. Carrier options include non-resorbable polymethylmethacrylate (PMMA) bone cement and resorbable calcium sulphate, hydroxyapatite, bioactive glass, and hydrogels. PMMA allows for creation of structural spacers used in multi-stage revision procedures, however it requires subsequent removal and antibiotic compatibility and the levels delivered are variable. Calcium sulphate is the most researched resorbable carrier in PJI, but is associated with wound leakage and hypercalcaemia, and clinical evidence for its effectiveness remains at the early stage. Hydrogels provide a versatile combability with antibiotics and adjustable elution profiles, but clinical usage is currently limited. Novel anti-biofilm therapies include bacteriophages which have been used successfully in small case series.

Perimeter and carvacrol-loading regulate angiogenesis and biofilm growth in 3D printed PLA scaffolds

Carvacrol is a natural low-cost compound derived from oregano which presents anti-bacterial properties against both Gram-positive and Gram-negative bacteria. In this work, carvacrol-loaded PLA scaffolds were fabricated by 3D printing as platforms to support bone tissue regeneration while preventing biofilm development. Scaffolds were printed with or without a perimeter (lateral wall) mimicking the cortical structure of bone tissue to further evaluate if the lateral interconnectivity could affect the biological or antimicrobial properties of the scaffolds. Carvacrol incorporation was performed by loading either the PLA filament prior to 3D printing or the already printed PLA scaffold. The loading method determined carvacrol localization in the scaffolds and its release profile. Biphasic profiles were recorded in all cases, but scaffolds loaded post-printed released carvacrol much faster, with 50-80% released in the first day, compared to those containing carvacrol in PLA filament before printing which sustained the release for several weeks. The presence or absence of the perimeter did not affect the release rate, but total amount released. Tissue integration and vascularization of carvacrol-loaded scaffolds were evaluated in a chorioallantoic membrane model (CAM) using a novel quantitative micro-computed tomography (micro-CT) analysis approach. The obtained results confirmed the CAM tissue ingrowth and new vessel formation within the porous structure of the scaffolds after 7 days of incubation, without leading to hemorrhagic or cytotoxic effects. The absence of lateral wall facilitated lateral integration of the scaffolds in the host tissue, although increased the anisotropy of the mechanical properties. Scaffolds loaded with carvacrol post-printing showed antibiofilm activity against Staphylococcus aureus and Pseudomonas aeruginosa as observed in a decrease in CFU counting after biofilm detachment, changes in metabolic heat measured by calorimetry, and increased contact killing efficiency. In summary, this work demonstrated the feasibility of tuning carvacrol release rate and the amount released from PLA scaffolds to achieve antibiofilm protection without altering angiogenesis, which was mostly dependent on the perimeter density of the scaffolds.

In vitro visualization and quantitative characterization of Pseudomonas aeruginosa biofilm growth dynamics on polyether ether ketone

Prevention and treatment of orthopedic device-related infection (ODRI) is complicated by the formation of bacterial biofilms. Biofilm formation involves dynamic production of macromolecules that contribute to the structure of the biofilm over time. Limitations to clinically relevant and translational biofilm visualization and measurement hamper advances in this area of research. In this paper, we present a multimodal methodology for improved characterization of Pseudomonas aeruginosa grown on polyether ether ketone (PEEK) as a model for ODRI. PEEK discs were inoculated with P. aeruginosa, incubated for 4-48 h time intervals, and fixed with 10% neutral-buffered formalin. Samples were stained with fluorescent dyes to measure biofilm components, imaged with confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM), and quantified. We were able to visualize and quantify P. aeruginosa biofilm growth on PEEK implants over 48 h. Based on imaging data, we propose a generalized growth cycle that can inform orthopedic diagnostic and treatment for this pathogen on PEEK. These results demonstrate the potential of using a combined CLSM and SEM approach for determining biofilm structure, composition, post-adherence development on orthopedic materials. This model may be used for quantitative biofilm analysis for other pathogens and other materials of orthopedic relevance for translational study of ODRI.

Mg-, Zn-, and Fe-Based Alloys With Antibacterial Properties as Orthopedic Implant Materials

Implant-associated infection (IAI) is one of the major challenges in orthopedic surgery. The development of implants with inherent antibacterial properties is an effective strategy to resolve this issue. In recent years, biodegradable alloy materials have received considerable attention because of their superior comprehensive performance in the field of orthopedic implants. Studies on biodegradable alloy orthopedic implants with antibacterial properties have gradually increased. This review summarizes the recent advances in biodegradable magnesium- (Mg-), iron- (Fe-), and zinc- (Zn-) based alloys with antibacterial properties as orthopedic implant materials. The antibacterial mechanisms of these alloy materials are also outlined, thus providing more basis and insights on the design and application of biodegradable alloys with antibacterial properties as orthopedic implants.

Bacterial Quorum-Sensing Molecules as Promising Natural Inhibitors of Candida albicans Virulence Dimorphism: An In Silico and In Vitro Study

Farnesol, a self-secreted quorum-sensing molecule (QSM) of Candida albicans, has been known to limit yeast-to-hyphal transition by blocking the RAS1-cAMP-PKA pathway. In a similar fashion, certain bacterial QSMs have also been reported to be successful in attenuating C. albicans biofilm and hyphal formation at relatively high cell density. This prompted us to investigate the antihyphal efficacy of certain bacterial QSMs through virtual docking against seminal drug targets, viz., CYCc and RAS1, that have been reported to be the hallmark players in C. albicans dimorphic virulence cascade. Against this backdrop, 64 QSMs belonging to five different bacterial QS signaling systems were subjected to initial virtual screening with farnesol as reference. Data of the virtual screening unveiled QSMs belonging to diketopiperazines (DKPs), i.e., 3-benzyl-6-isobutylidene-2,5-piperazinedione (QSSM 1157) and cyclo(l-Pro-l-Leu) (QSSM 1112), as potential inhibitors of CYCc and RAS1 with binding energies of -8.2 and -7.3 kcal mol-1, respectively. Further, the molecular dynamics simulations (for 50 ns) of CYCc-QSSM 1157 and RAS1-QSSM 1112 complexes revealed the mean ligand root mean square deviation (RMSD) values of 0.35 and 0.27 Å, respectively, which endorsed the rigid nature, less fluctuation in binding stiffness, and conformation of binding complexes. Furthermore, the identified two QSMs were found to be good in solubility, absorption, and permeation and less toxic in nature, as revealed by pharmacokinetics and toxicity analyses. In addition, the in vitro antihyphal assays using liquid and solid media, germ-tube experiment, and microscopic analysis strongly validated DKP-QSSM 1112 as a promising inhibitor of hyphal transition. Taken together, the present study unequivocally proves that DKPs can be used as potent inhibitors of C. albicans virulence dimorphism.