Oxidation and degradation of polypropylene transvaginal mesh

Uncovering the relationship between macrophages and polypropylene surgical mesh

Currently, in vitro testing examines the cytotoxicity of biomaterials but fails to consider how materials respond to mechanical forces and the immune response to them; both are crucial for successful long-term implantation. A notable example of this failure is polypropylene mid-urethral mesh used in the treatment of stress urinary incontinence (SUI). The mesh was largely successful in abdominal hernia repair but produced significant complications when repurposed to treat SUI. Developing more physiologically relevant in vitro test models would allow more physiologically relevant data to be collected about how biomaterials will interact with the body. This study investigates the effects of mechanochemical distress (a combination of oxidation and mechanical distention) on polypropylene mesh surfaces and the effect this has on macrophage gene expression. Surface topology of the mesh was characterised using SEM and AFM; ATR-FTIR, EDX and Raman spectroscopy was applied to detect surface oxidation and structural molecular alterations. Uniaxial mechanical testing was performed to reveal any bulk mechanical changes. RT-qPCR of selected pro-fibrotic and pro-inflammatory genes was carried out on macrophages cultured on control and mechanochemically distressed PP mesh. Following exposure to mechanochemical distress the mesh surface was observed to crack and craze and helical defects were detected in the polymer backbone. Surface oxidation of the mesh was seen after macrophage attachment for 7 days. These changes in mesh surface triggered modified gene expression in macrophages. Pro-fibrotic and pro-inflammatory genes were upregulated after macrophages were cultured on mechanochemically distressed mesh, whereas the same genes were down-regulated in macrophages exposed to control mesh. This study highlights the relationship between macrophages and polypropylene surgical mesh, thus offering more insight into the fate of an implanted material than existing in vitro testing.

Accelerated in vitro oxidative degradation testing of polypropylene surgical mesh

Polypropylene (PP) surgical mesh had reasonable success in repair of hernia and treatment of stress urinary incontinence (SUI); however, their use for the repair of pelvic organ prolapse (POP) resulted in highly variable results with lifelong complications in some patients. One of several factors that could be associated with mesh-related POP complications is changes in the properties of the implanted surgical mesh due to oxidative degradation of PP in vivo. Currently, there are no standardized in vitro bench testing methods available for assessing the susceptibility to oxidative degradation and estimating long-term in vivo stability of surgical mesh. In this work, we adapted a previously reported automated reactive accelerated aging (aRAA) system, which uses elevated temperatures and high concentrations of hydrogen peroxide (H2 O2 ), for accelerated bench-top oxidative degradation testing of PP surgical mesh. Since H2 O2 is highly unstable at elevated temperatures and for prolonged periods, the aRAA system involves a feedback loop based on electrochemical detection methods to maintain consistent H2 O2 concentration in test solutions. Four PP mesh samples with varying mesh knit designs, filament diameter, weight, and % porosity, were selected for testing using aRAA up to 4 weeks and characterized using thermal analysis, Fourier-transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) and scanning electron microscopy (SEM). Additionally, the oxidation index (OI) values were calculated based on the FTIR-ATR spectra to estimate the oxidative degradation and oxidation reaction kinetics of PP surgical mesh. The OI values and surface damage in the form of surface flaking, peeling, and formation of transverse cracks increased with aRAA aging time. The aRAA test method introduced here could be used to standardize the assessment of long-term stability of surgical mesh and may also be adopted for accelerated oxidative degradation testing of other polymer-based medical devices.

Characterization in respect to degradation of titanium-coated polypropylene surgical mesh explanted from humans

Titanium-coated polypropylene (Ti-PP) mesh was introduced in 2002 as a surgical mesh for the treatment of hernias and shortly after for pelvic floor surgery, with the aim of improving biocompatibility when compared to non-titanised/regular PP mesh implants. The application of a titanium coating could also be beneficial to address concerns regarding the exposure of PP in an in vivo environment. Many studies have shown that PP, although it is widely accepted as a stable polymer, is subject to oxidation and degradation, such degradation affects the mechanical behavior, that is, the stiffness and tensile strength of PP mesh. Despite the wide clinical use of Ti-PP surgical meshes, no study has yet investigated the residual material properties post clinical deployment and subsequent explantation. In this study, two explanted Ti-PP mesh samples each having different incorporation durations from two patients were examined. Material analysis conducted within this study includes the following techniques: attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, low voltage - scanning electron microscopy (LV-SEM), backscattered electron (BSE) imaging, energy dispersive X-ray spectroscopy (EDS) and secondary election hyperspectral imaging (SEHI). The hypothesis of this study is that the Ti coating successfully shields the PP mesh from oxidative stress in vivo and thus protects it from degradation. The results of this analysis show for the first time evidence of bulk oxidation, surface degradation, and environmental stress cracking on explanted Ti-PP meshes.

Analyzing material changes consistent with degradation of explanted polymeric hernia mesh related to clinical characteristics

BACKGROUND

Proposed mechanisms that potentially contribute to polypropylene mesh degradation after in vivo exposure include oxidizing species and mechanical strains induced by normal healing, tissue integration, muscle contraction, and the immediate and chronic inflammatory responses.

METHODS

This study explores these potential degradation mechanisms using 63 mesh implants retrieved from patients after a median implantation time of 24 months following hernia repair surgery (mesh explants) and analysis of multivariate associations between the material changes and clinical characteristics. Specifically, polypropylene mesh degradation was characterized in terms of material changes in surface oxidation, crystallinity and mechanical properties, and clinical characteristics included mesh placement location, medical history and mesh selection.

RESULTS

Compared to pristine control samples, subsets of mesh explants had evidence of surface oxidation, altered crystallinity, or changed mechanical properties. Using multivariate statistical approach to control for clinical characteristics, infection was a significant factor affecting changes in mesh stiffness and mesh class was a significant factor affecting polypropylene crystallinity changes.

CONCLUSIONS

Highly variable in vivo conditions expose mesh to mechanisms that alter clinical outcomes and potentially contribute to mesh degradation. These PP mesh explants after 0.5 to 13 years in vivo had measurable changes in surface chemistry, crystallinity and mechanical properties, with significant trends associated with factors of mesh placement, mesh class, and infection.

Vaginal enterocele after cystectomy: A case report

BACKGROUND

After undergoing radical cystectomy combined with hysterectomy, female patients may suffer from pelvic organ prolapse due to the destruction of pelvic structures, which mainly manifests as the prolapse of tissues of the vulva to varying degrees and can be accompanied by symptoms, such as bleeding and inflammation. Once this complication is present, surgical intervention is needed to resolve it. Therefore, preventing and managing this complication is especially important.

CASE SUMMARY

The postoperative occurrence of acute enterocele is rare, and a case of acute small bowel vaginosis 2 mo after radical cystectomy with hysterectomy is reported. When the patient was admitted, physical examination revealed that the small bowel was displaced approximately 20 cm because of vaginocele. A team of gynecological, general surgery, and urological surgeons was employed to return the small bowel and repair the lacerated vaginal wall during the emergency operation. Eventually, the patient recovered, and no recurrence was seen in the half year of follow-up.

CONCLUSION

We review the surgical approach for such patients, analyze high-risk factors for the disease and suggest corresponding preventive measures.

Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction

Pelvic organ prolapse (POP) is the herniation of surrounding tissue and organs into the vagina and or rectum, and is a result of weakening of pelvic floor muscles, connective tissue,...

Host-biomaterial interactions in mesh complications after pelvic floor reconstructive surgery

Polypropylene (PPL) mesh is widely used in pelvic floor reconstructive surgery for prolapse and stress urinary incontinence. However, some women, particularly those treated using transvaginal PPL mesh placement for prolapse, experience intractable pain and mesh exposure or extrusion. Explanted tissue from patients with complications following transvaginal implantation of mesh is typified by a dense fibrous capsule with an immune cell-rich infiltrate, suggesting that the host immune response has a role in transvaginal PPL mesh complications through the separate contributions of the host (patient), the biological niche within which the material is implanted and biomaterial properties of the mesh. This immune response might be strongly influenced by both the baseline inflammatory status of the patient, surgical technique and experience, and the unique hormonal, immune and microbial tissue niche of the vagina. Mesh porosity, surface area and stiffness also might have an effect on the immune and tissue response to transvaginal mesh placement. Thus, a regulatory pathway is needed for mesh development that recognizes the roles of host and biological factors in driving the immune response to mesh, as well as mandatory mesh registries and the longitudinal surveillance of patients.

A novel characterisation approach to reveal the mechano-chemical effects of oxidation and dynamic distension on polypropylene surgical mesh

Polypropylene (PP) surgical mesh, used successfully for the surgical repair of abdominal hernias, is associated with serious clinical complications when used in the pelvic floor for repair of stress urinary incontinence or support of pelvic organ prolapse. While manufacturers claim that the material is inert and non-degradable, there is a growing body of evidence that asserts PP fibres are subject to oxidative damage and indeed explanted material from patients suffering with clinical complications has shown some evidence of fibre cracking and oxidation. It has been proposed that a pathological cellular response to the surgical mesh contributes to the medical complications; however, the mechanisms that trigger the specific host response against the material are not well understood. Specifically, this study was constructed to investigate the mechano-chemical effects of oxidation and dynamic distension on polypropylene surgical mesh. To do this we used a novel advanced spectroscopical characterisation technique, secondary electron hyperspectral imaging (SEHI), which is based on the collection of secondary electron emission spectra in a scanning electron microscope (SEM) to reveal mechanical-chemical reactions within PP meshes.

Degradation resistance of PVDF mesh in vivo in comparison to PP mesh

Mesh implant has been applied in hernia repair and urogynecological reconstruction. Polypropylene (PP) is now the most widely used material for non-resorbable mesh implants. A degradation phenomenon of PP mesh, which is apparent on the mesh surface as cracking, flaking and peeling, was discovered in the 1990's. This phenomenon of mesh implant has drawn attention because of mesh-related litigations. Polyvinylidene fluoride (PVDF), due to its high biocompatible performance, has been used since 2003 as an alternative material for non-resorbable mesh implants. Till now, no such degradation phenomenon of PVDF mesh has been reported, although limited study on PVDF mesh is available. In this paper, we researched the degradation of PVDF meshes taking the degradation of PP mesh as a reference. The meshes analysed in this study were received from a previous animal experiment. To expose the surface of explanted meshes, a tissue removing method with protease was used and the result of this cleaning process was tested by X-ray Photoelectron Spectroscopy (XPS). The morphological condition of the mesh surface was compared using Scanning Electron Microscopy (SEM) and the chemical condition concerning degradation was analysed through Fourier Transform Infrared Spectroscopy (FTIR). The surface condition of PVDF mesh after 3-, 6-, 12- and 24-month implantation was illustrated and compared with two types of PP meshes. XPS revealed an absence of nitrogen, confirming the successful removal of tissue residues using protease. SEM results presented no notable morphological surface change of the PVDF mesh and progressive surface cracking processes over time of both types of PP meshes. FTIR spectra of the implanted PVDF meshes had no considerable difference from the spectrum of the pristine mesh, while FTIR spectra of both types of PP meshes had extra chemical functional groups (carbonyl (CO) and hydroxyl (-OH) groups) increasing with implantation time, indicating progressive degradation. This study highlights the morphological and chemical stability of the PVDF mesh and demonstrates that the PVDF mesh is more resistant to degradation in comparison to the other two types of PP meshes.

Implantation Time Has No Effect on the Morphology and Extent of Previously Reported "Degradation" of Prolene Pelvic Mesh

OBJECTIVES

Prolene polypropylene ("Prolene") meshes demonstrate no in vivo degradation, yet some claim degradation continues until no more Prolene polypropylene can be oxidized. We studied whether implantation time affects the morphology/extent of previously reported as cracking/degradation of completely cleaned Prolene explants.

METHODS

Urogynecological explants (248 patients) were collected. After excluding non-Prolene/unknown meshes and those without known implantation times, completely cleaned explants (n = 205; 0.2-14.4 years implantation) were analyzed with light microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. Based on implant times and storage (fixative or dry), representative specimens were randomly selected for comparison. Controls were unused ("exemplar") TVT specimens with and without intentional oxidation via ultraviolet light exposure.

RESULTS

Prolene explants included 31 dry (18 TVT; 7 Prolift; 4 Gynemesh; 2 others) and 174 wet (87 TVT; 47 Prolift; 10 Gynemesh; 30 others) specimens. Specimens had similar morphologies before cleaning. Progressive cleaning removed tissue and cracked tissue-related material exposing smooth, unoxidized, and nondegraded fibers, with no visible gradient-type/ductile damage. Fourier transform infrared spectroscopy of the explants confirmed progressive loss of proteins. Cleaning intentionally oxidized exemplars did not remove oxidized carbonyl frequencies and showed deep cracks and gross fiber rupture/embrittlement, unlike the explants and nonoxidized exemplars.

CONCLUSIONS

If in vivo Prolene degradation exists, there should be wide-ranging crack morphology and nonuniform crack penetration, as well as more cracking, degradation, and physical breakage for implants of longer implantation times, but this was not the case. There is no morphologic or spectral/chemical evidence of Prolene mesh degradation after up to 14.4 years in vivo.

Effect of the platelet-rich plasma covering of polypropylene mesh on oxidative stress, inflammation, and adhesions

INTRODUCTION AND HYPOTHESIS

Polypropylene mesh (PPM) is often used for urogynecological repair; however, it can cause complications. An approach to reduce complications is to coat PPM with anti-inflammatory and wound-healing molecules. Platelet-rich plasma (PRP) is inexpensive and improves wound healing. Therefore, we evaluated whether covering PPM with PRP could reduce inflammation, adhesion, and oxidative stress (OS) in rabbits.

METHODS

The primary objective was to evaluate OS, and the secondary objectives were to evaluate inflammation and adhesion. PRP-coated PPM was implanted on the right side of the abdominal cavity of 12 female New Zealand rabbits, in the interface between the hypodermis and peritoneum. An uncoverated PPM was implanted in the other side. Twelve rabbits served as the sham group; all animals were euthanized after 30 or 60 days. Inflammatory parameters were myeloperoxidase (MPO) and N-acetylglucosaminidase (NAG) activities. OS was evaluated by measuring the ferric-reducing antioxidant power, the free-radical-reducing ability of 3-ethylbenzothiazoline-6-sulfonic acid [2,2'-azino-bis (ABTS)], reduced glutathione levels, and superoxide anion production. Adhesion was measured using tenacity and Diamond scales (the latter of which grades adhesions according to their extent) Inflammation and OS were analyzed by analysis of variance (ANOVA), followed by Tukey's test. The Mann-Whitney test was used to evaluate adhesions, and analysis of the sham group was conducted using Kruskal-Wallis test.

RESULTS

No significant differences were observed in parameters of adhesions. After 60 days, PRP-coverated PPM presented a decrease in MPO and NAG activities. Furthermore, decreased OS and increased antioxidant levels were observed in PRP-coverated PPM samples.

CONCLUSIONS

The reduction of OS and inflammatory responses indicates that PRP-covered PPM is a promising therapeutic approach.

Mesh implants for hernia repair: an update

INTRODUCTION

Today the use of textile meshes has become a standard for the treatment of abdominal wall hernias and for the reinforcement of any tissue repair as the strength of the implant decreases the recurrence rates. With increasing use, side effects of the textile implants became apparent, as well.

AREAS COVERED

Based on publications in Medline over the past decade, general and specific benefits, as well as risks, are discussed with the challenge to define individual risk-benefit ratios. For meshes, certain high-risk or low-risk conditions can be defined. In an attempt to eliminate mesh-related risks, quality control for medical devices has meanwhile been revised. In both the USA and the EU post-market surveillance studies are required to keep medical devices approved.

EXPERT COMMENTARY

The impact of material on the complication rate will vary depending on the patient's co-morbidity or the risks of the procedure. Even the best material can end up with disappointing results in case of poor healing or poor surgery. On the other hand, when using high-risk devices, most of the complications after excellent surgery with excellent indication can be supposed to be mesh-related. Thus, the use of low-risk devices is recommended even though its advantage may not be demonstrable in clinical studies.