Microbial fuel cells and microbial electrolysis cells for the production of bioelectricity and biomaterials

Recent advancements in microbial fuel cells: A review on its electron transfer mechanisms, microbial community, types of substrates and design for bio-electrochemical treatment

The development in urbanization, growth in industrialization and deficiency in crude oil wealth has made to focus more for the renewable and also sustainable spotless energy resources. In the past two decades, the concepts of microbial fuel cell have caught more considerations among the scientific societies for the probability of converting, organic waste materials into bio-energy using microorganisms catalyzed anode, and enzymatic/microbial/abiotic/biotic cathode electro-chemical reactions. The added benefit with MFCs technology for waste water treatment is numerous bio-centered processes are available such as sulfate removal, denitrification, nitrification, removal of chemical oxygen demand and biological oxygen demand and heavy metals removal can be performed in the same MFC designed systems. The various factors intricate in MFC concepts in the direction of bioenergy production consists of maximum coulombic efficiency, power density and also the rate of removal of chemical oxygen demand which calculates the efficacy of the MFC unit. Even though the efficacy of MFCs in bioenergy production was initially quietly low, therefore to overcome these issues few modifications are incorporated in design and components of the MFC units, thereby functioning of the MFC unit have improvised the rate of bioenergy production to a substantial level by this means empowering application of MFC technology in numerous sectors including carbon capture, bio-hydrogen production, bioremediation, biosensors, desalination, and wastewater treatment. The present article reviews about the microbial community, types of substrates and information about the several designs of MFCs in an endeavor to get the better of practical difficulties of the MFC technology.

Electrode Materials Engineering in Electrocatalytic CO2 Reduction: Energy Input and Conversion Efficiency

Electrocatalytic CO₂ reduction (ECR) is a promising technology to simultaneously alleviate CO₂ -caused climate hazards and ever-increasing energy demands, as it can utilize CO₂ in the atmosphere to provide the required feedstocks for industrial production and daily life. In recent years, substantial progress in ECR systems has been achieved by the exploitation of various novel electrode materials. The anodic materials and cathodic catalysts that have, respectively, led to high-efficiency energy input and effective heterogenous catalytic conversion in ECR systems are comprehensively reviewed. Based on the differences in the nature of energy sources and the role of materials used at the anode, the fundamentals of ECR systems, including photo-anode-assisted ECR systems and bio-anode-assisted ECR systems, are explained in detail. Additionally, the cathodic reaction mechanisms and pathways of ECR are described along with a discussion of different design strategies for cathode catalysts to enhance conversion efficiency and selectivity. The emerging challenges and some perspective on both anode materials and cathodic catalysts are also outlined for better development of ECR systems.

Effect of organic loading rate on the recovery of nutrients and energy in a dual-chamber microbial fuel cell

This study aimed to assess the impacts of organic loading rate (OLR) (435-870 mgCOD/L·d) on nutrients recovery via a double-chamber microbial fuel cell (MFC) for treating domestic wastewater. Electricity generation was also explored at different OLRs, including power density and coulombic efficiency. Experimental results suggested the MFC could successfully treat municipal wastewater with over 90% of organics being removed at a wider range of OLR from 435 to 725 mgCOD/L·d. Besides, the maximum power density achieved in the MFC was 253.84 mW/m² at the OLR of 435 mgCOD/L·d. Higher OLR may disrupt the recovery of PO₄^3--P and NH₄⁺-N via the MFC. The same pattern was observed for the coulombic efficiency of the MFC and its highest value was 25.01% at the OLR of 435 mgCOD/L·d. It can be concluded that nutrients and electrical power can be simultaneously recovered from municipal wastewater via the dual-chamber MFC.

Relaxing the formation of hypoxic bottom water with sediment microbial fuel cells

The method of improving bottom water environment using industrial wastes to suppress diffusion substances from bottom sediment has recently captured the attention of many researchers. In this study, wastewater discharge-derived sediment was used to examine an alternative approach involving the use of sediment microbial fuel cells (SMFCs) in relaxing the formation of hypoxic bottom water, and removing reduced substances from sediment. Concentrations of dissolved oxygen (DO) and other ions were measured in overlying water and sediment pore water with and without the application of SMFCs. The results suggest that SMFCs can markedly reduce hydrogen sulfide and manganese ion concentrations in overlying water, and decrease the depletions of redox potential and DO concentration. In addition, SMFCs can dissolve ferric compounds in the sediment and thereby release the ferric ion available to fix phosphate in the sediment. Our results indicate that SMFCs can be used as an alternative method to relax the formation of hypoxic bottom water and to remove reduced substances from the sediment, thus improving the quality of both water and sediment environments.

Influence of carbon electrode material on energy recovery from winery wastewater using a dual-chamber microbial fuel cell

The aim of this work was to evaluate three carbon materials as anodes in microbial fuel cells (MFCs), clarifying their influence on the generation of electricity and on the treatability of winery wastewater, a highly organic-loaded waste. The electrode materials tested were carbon felt, carbon cloth and carbon paper and they were used at the same time as anode and cathode in the tests. The MFC equipped with carbon felt reached the highest voltage and power (72 mV and 420 mW m^-2, respectively), while the lowest values were observed when carbon paper was used as electrode (0.2 mV and 8.37·10^-6 mW m^-2, respectively). Chemical oxygen demand (COD) removal from the wastewater was observed to depend on the electrode material, as well. When carbon felt was used, the MFC showed the highest average organic matter consumption rate (650 mg COD L^-1 d^-1), whereas by using carbon paper the rate decreased to 270 mg COD L^-1 d^-1. Therefore, both electricity generation and organic matter removal are strongly related not to the chemical composition of the electrode (which was graphite carbon in the three electrodes), but to its surface features and, consequently, to the amount of biomass adhered to the electrode surface.

From biofilm ecology to reactors: a focused review

Biofilms are complex biostructures that appear on all surfaces that are regularly in contact with water. They are structurally complex, dynamic systems with attributes of primordial multicellular organisms and multifaceted ecosystems. The presence of biofilms may have a negative impact on the performance of various systems, but they can also be used beneficially for the treatment of water (defined herein as potable water, municipal and industrial wastewater, fresh/brackish/salt water bodies, groundwater) as well as in water stream-based biological resource recovery systems. This review addresses the following three topics: (1) biofilm ecology, (2) biofilm reactor technology and design, and (3) biofilm modeling. In so doing, it addresses the processes occurring in the biofilm, and how these affect and are affected by the broader biofilm system. The symphonic application of a suite of biological methods has led to significant advances in the understanding of biofilm ecology. New metabolic pathways, such as anaerobic ammonium oxidation (anammox) or complete ammonium oxidation (comammox) were first observed in biofilm reactors. The functions, properties, and constituents of the biofilm extracellular polymeric substance matrix are somewhat known, but their exact composition and role in the microbial conversion kinetics and biochemical transformations are still to be resolved. Biofilm grown microorganisms may contribute to increased metabolism of micro-pollutants. Several types of biofilm reactors have been used for water treatment, with current focus on moving bed biofilm reactors, integrated fixed-film activated sludge, membrane-supported biofilm reactors, and granular sludge processes. The control and/or beneficial use of biofilms in membrane processes is advancing. Biofilm models have become essential tools for fundamental biofilm research and biofilm reactor engineering and design. At the same time, the divergence between biofilm modeling and biofilm reactor modeling approaches is recognized.

The tubular MFC with carbon tube air-cathode for power generation and N,N-dimethylacetamide treatment

A continuous flow microbial fuel cell (MFC) was assembled with carbon tube air-cathode and carbon felt anode. The organic solvent N,N-dimethylacetamide (DMAC) was used as the only carbon source for power generation. After the adaptive phase, the cell potential was gradually increased from 0.15 to 0.45 V with 200 Ω of external resistor during 150 h of operation. The calculated power density of this MFC was 100 mW L(-1) when the cell potential was 0.45 V. The reversible redox peaks of carbon tube were obtained in cyclic voltammogram between -0.5 and -0.25 V under aerobic circumstance. The removal rate of DMAC was 15-50% after treatment with hydraulic retention time of 12 min. The results indicated that it is possible to realize the power extraction from DMAC wastewater in the form of electricity by the bioconversion process of MFC.