Investigation of Naphthalene Removal from Aqueous Solutions in an Integrated Slurry Photocatalytic Membrane Reactor: Effect of Operating Parameters, Identification of Intermediates, and Response Surface Approach

Optimization of photocatalytic ceramic membrane filtration by response surface methodology: Effects of hydrodynamic conditions on organic fouling and removal efficiency

The effects of the operating conditions, including the applied pressure, feed organic concentration, and recirculation flowrate along the TiO2-coated ceramic membrane, on the normalized membrane permeability and organic removal efficiency were systematically investigated by operating a photocatalytic membrane reactor (PMR). Response surface methodology (RSM) was conducted to better understand the interactive effect of operational conditions as well as their individual and combined effects to control membrane performance. Our results showed that the applied pressure and feed organic concentration, as single parameter, affected the normalized membrane permeability and organic removal efficiency more dominantly than the recirculation flowrate. The polynomial performance equations generated by RSM successfully predicted the membrane performance of the PMR. The responses to the normalized membrane permeability and organic removal efficiency with respect to the operational conditions were less sensitive to any combination of operational conditions than to their individual impacts. The combined effects of the operating conditions were less pronounced in promoting the catalytic performance of organic contaminants on the TiO2 surface. Our RSM analysis based on experimental observations designed by Box-Behnken Design (BBD) suggested that 1.3 bar of applied pressure, 44 mg/L of feed organic dye concentration and 0.8 L/min as recirculation flowrate as optimum conditions achieved more than 98% of organic removal efficiency and less than 5% of decline in normalized membrane permeability. This research shows that the RSM provides effective tool to optimize operational conditions to determine fouling rate and organic removal in PMR.

Tetracycline removal from wastewater via g-C3N4 loaded RSM-CCD-optimised hybrid photocatalytic membrane reactor

In this study, a split-type photocatalytic membrane reactor (PMR), incorporating suspended graphitic carbon nitride (g-C3N4) as photocatalyst and a layered polymeric composite (using polyamide, polyethersulfone and polysulfone polymers) as a membrane was fabricated to remove tetracycline (TC) from aqueous solutions as the world's second most used and discharged antibiotic in wastewater. The photocatalyst was synthesised from melamine by ultrasonic-assisted thermal polymerisation method and, along with the membrane, was characterised using various methods, including Brunauer-Emmett-Teller analysis (BET), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), and Ultraviolet-visible spectroscopy (UV-Vis). The PMR process was optimised, using Design-Expert software for tetracycline removal in terms of UV irradiation time, pH, photocatalyst loading, tetracycline concentration, and membrane separation iteration. It was revealed that a membrane-integrated reactor as a sustainable system could effectively produce clean water by simultaneous removal of tetracycline and photocatalyst from aqueous solution. The maximum removal of 94.8% was obtained at the tetracycline concentration of 22.16 ppm, pH of 9.78 with 0.56 g/L of photocatalyst in the irradiation time of 113.77 min after six times of passing membrane. The PMR system showed reasonable reusability by about a 25.8% drop in TC removal efficiency after seven cycles at optimal conditions. The outcomes demonstrate the promising performance of the proposed PMR system in tetracycline removal from water and suggest that it can be scaled as an effective approach for a sustainable supply of antibiotic-free clean water.

An Overview of Photocatalytic Membrane Degradation Development

Environmental pollution has become a worldwide issue. Rapid industrial and agricultural practices have increased organic contaminants in water supplies. Hence, many strategies have been developed to address this concern. In order to supply clean water for various applications, high-performance treatment technology is required to effectively remove organic and inorganic contaminants. Utilizing photocatalytic membrane reactors (PMRs) has shown promise as a viable alternative process in the water and wastewater industry due to its efficiency, low cost, simplicity, and low environmental impact. PMRs are commonly categorized into two main categories: those with the photocatalyst suspended in solution and those with the photocatalyst immobilized in/on a membrane. Herein, the working and fouling mechanisms in PMRs membranes are investigated; the interplay of fouling and photocatalytic activity and the development of fouling prevention strategies are elucidated; and the significance of photocatalysis in membrane fouling mechanisms such as pore plugging and cake layering is thoroughly explored.