Epidemiological profile of thoracolumbar fracture (TLF) over a period of 10 years in Tianjin, China

Comparison of 3D-navigation and fluoroscopic guidance in percutaneous pedicle screw placement for traumatic fractures of the thoracolumbar junction

Introduction

Fractures of the thoracolumbar junction are the most common vertebral fractures and can require surgical treatment. Several studies have shown that the accuracy of pedicle screw placement can be improved by the use of 3D-navigation. Still only few studies have focused on the use of navigation in traumatic spine injuries.

Research question

The aim of this study was to compare the screw placement accuracy and radiation exposure for 3D-navigated and fluoroscopy-guided percutaneous pedicle screw placement in traumatic fractures of the thoracolumbar junction.

Materials and methods

In this single-center study 25 patients undergoing 3D-navigated percutaneous pedicle screw placement for traumatic fractures of the thoracolumbar junction (T12-L2) were compared to a control group of 25 patients using fluoroscopy. Screw accuracy was determined in postoperative CT-scans using the Gertzbein-Robbins classification system. Additionally, duration of surgery, dose area product, fluoroscopy time and intraoperative complications were compared between the groups.

Results

The accuracy of 3D-navigated percutaneous pedicle screw placement was 92.66 % while an accuracy of 88.08 % was achieved using standard fluoroscopy (p = 0.19). The fluoroscopy time was significantly less in the navigation group compared to the control group (p = 0.0002). There were no significant differences in radiation exposure, duration of surgery or intraoperative complications between the groups.

Discussion and conclusion

The results suggest that 3D-navigation facilitates higher accuracy in percutaneous pedicle screw placement of traumatic fractures of the thoracolumbar junction, although limitations should be considered. In this study 3D-navigation did not increase fluoroscopy time, while radiation exposure and surgery time were comparable.

Functionalization of Osteoplastic Material with Human Placental Growth Factor and Assessment of Biocompatibility of the Resulting Material In Vitro

This article provides the results of a study of the interaction of placental growth factor with adipose-derived stem cells (ASCs) of various origins, as well as the possibility of generating osteoplastic material based on xenogeneic matrix functionalization with human placental growth factor (PLGF). It is demonstrated that the greatest release of this factor from the functionalized material into the medium occurs during the first 3 h of contact with the model medium, but then the levels of the factor being released fall sharply, although release did continue throughout the 7 days of observation. The modified material was not cytotoxic, and its surface provided good cell adhesion. During 3 days of cultivation, the ASCs proliferated and migrated more actively on the surfaces of the modified material than on the surfaces of the control material. This study can serve as the basis for the development of original methods to functionalize such osteoplastic material by increasing PLGF immobilization by creating stronger bonds in order to regulate both factor dosage and the dynamics of the factor release into the environment. Further studies in experimental animals should facilitate assessment of the effectiveness of the functionalized materials. Such studies will be useful in the development of osteoplastic materials with new properties resulting from the inclusion of growth factors and in research on their biological activity.

Biomechanical Comparison of Different Treatment Strategies for Thoracolumbar Burst Fracture: A Finite Element Study

OBJECTIVE

The aim of this study was to compare the biomechanical performance of 6 pedicle screw internal fixation strategies for the treatment of burst fractures of the thoracolumbar spine using finite element (FE) analysis.

METHODS

A finite element model of the T11-L3 thoracolumbar segment was established to simulate L1 vertebral burst fractures, and 6 models were conducted under multidirectional loading conditions: P2-D2, P1-D1, P2-D1,P1-D, P1-BF-D1, and P1-UF-D1. The range of motion (ROM) in the T12-L2 region and the von Mises stresses of pedicle screws and rods under the 6 internal fixation models were mainly analyzed.

RESULTS

The maximum ROM and von Mises stress were obtained under flexion motion in all models. The P1-BF-D1 model had the least ROM and screw stress. However, when the injured vertebra was not nailed bilaterally, the P1-UF-D1 model had the smallest ROM; the maximum von Mises stress on the screw and rod was remarkably higher than that recorded in the other models. Moreover, the P2-D1 model had a ROM similar to that of the P1-D2 model, but with lower screw stress. The 2 models outperformed the P1-D1 model in all 6 conditions. The P2-D2 model had a similar ROM with the P2-D1 model; nevertheless, the maximum von Mises stress was not substantially reduced.

CONCLUSIONS

The P1-BF-D1 model exhibited better stability and less von Mises stress on the pedicle screws and rods, thereby reducing the risk of screw loosening and fracture. The P2-D1 internal fixation approach is recommended when the fractured vertebrae are not nailed bilaterally.

Analysis of the Classification Systems for Thoracolumbar Fractures in Adults and Their Evolution and Impact on Clinical Management

Although they represent a significant chapter of traumatic pathology with a deep medical and social impact, thoracolumbar fractures have proven to be elusive in terms of a definitive classification. The ever-changing concept of the stability of a thoracolumbar injury (from Holdsworth’s two-column concept to Denis’ three-column theory), the meaningful integration of neurological deficit, and a reliable clinical usability have made reaching a universally accepted and reproductible classification almost impossible. The advent of sophisticated imaging techniques and an improved understanding of spine biomechanics led to the development of several classification systems. Each successive system has contributed significantly to the understanding of physiopathological mechanisms and better treatment management. Magerl et al. developed a comprehensive classification system based on progressive morphological damage determined by the following three fundamental forces: compression, distraction, and axial torque. Vaccaro et al. devised the thoracolumbar injury severity score based on the following three independent variables: the morphology of the injury, posterior ligamentous complex (PLC) integrity, and neurological status at the time of injury. However, there are limitations to the classification system, especially when magnetic resonance imaging yields an uncertain status of PLC. The authors review the various classification systems insisting on their practical relevance and caveats and illustrate the advantages and disadvantages of the most widely used systems with relevant cases from their practice.

Incidence and Epidemiology of Thoracolumbar Spine Fractures: WFNS Spine Committee Recommendations

This review aims to search the epidemiology and incidence rates of thoracolumbar spine fractures. A systematic review of the literature of the last 10 years gave 586 results with “incidence,” and 387 results with “epidemiology,” of which 39 papers were analyzed. The review results were discussed and voted in 2 consensus meetings of the WFNS (World Federation of Neurosurgical Societies) Spine Committee. Out of 39 studies, 15 studies have focused on thoracolumbar trauma, remaining 24 studies have looked at all spine trauma. Most were retrospective in nature; few were prospective and multicenter. Some studies have focused on specific injuries. The annual incidence of TL fractures is about 30/100,000 inhabitants including osteoporotic fractures. There is a trend to increase the fractures in elderly population especially in developed countries, while an increase of motor vehicle accidents in developing countries. The mortality rate among male elderly patients is relatively high. The incidence of thoracolumbar spine fractures is increasing because of low-velocity falls in the elderly population. The main reasons are falls and traffic accidents. Learning the regional differences and some special forms of trauma such as extreme sports, war, and gunshot injuries will help the prevention of the thoracolumbar spine fractures.

Stress analysis of the thoracolumbar junction in the process of backward fall: An experimental study and finite element analysis

The aim of the present study was to evaluate the biomechanical mechanism of injuries of the thoracolumbar junction by the methods of a backward fall simulation experiment and finite element (FE) analysis (FEA). In the backward fall simulation experiment, one volunteer was selected to obtain the contact force data of the sacrococcygeal region during a fall. Utilizing the fall data, the FEA simulation of the backward fall process was given to the trunk FE model to obtain the stress status of local bone structures of the thoracolumbar junction during the fall process. In the fall simulation test, the sacrococcygeal region of the volunteer landed first; the total impact time was 1.14±0.58 sec, and the impact force was up to 4,056±263 N. The stress of thoracic (T)11 was as high as 42 MPa, that of the posterior margin and the junction of T11 was as high as 70.67 MPa, and that of the inferior articular process and the superior articular process was as high as 128 MPa. The average stress of T12 and the anterior margin of lumbar 1 was 25 MPa, and that of the endplate was as high as 21.7 MPa, which was mostly distributed in the back of the endplate and the surrounding cortex. According to the data obtained from the fall experiment as the loading condition of the FE model, the backward fall process can be simulated to improve the accuracy of FEA results. In the process of backward fall, the front edge of the vertebral body and the root of vertebral arch in the thoracolumbar junction are stress concentration areas, which have a greater risk of injury.

Augmentation of Pedicle Screws Using Bone Grafting in Patients with Spinal Osteoporosis

The aim of the study was to develop a new method of vertebral augmentation based on autologous and allogeneic bone chips to be used in pedicle screw fixation and to compare this method with the technique based on polymethyl methacrylate (PMMA).