Deriving fuel-based emission factor thresholds to interpret heavy-duty vehicle roadside plume measurements

The migration of CO and PM under different working conditions of trackless rubber-tyred vehicle and health risk assessment of underground personnel

Trackless rubber-tyred vehicles are among the most widely used underground auxiliary transportation equipment in major coal mines at present. The migration of exhaust gas that threaten human health varies with the working conditions of trackless rubber-tyred vehicles. In order to better evaluate the health risks faced by underground personnel in the process of exhaust emission from underground diesel vehicles, in this paper, the migration of carbon monoxide (CO) and particulate matter (PM) emitted by trackless rubber-tyred vehicle under three working conditions was analyzed by using the method of CFD (Computational Fluid Dynamics) numerical simulation and field measurement. It can be concluded that the concentrations of CO and PM changed with the change of airflow field under different working conditions, and their distribution tended to be consistent on the whole. Although the migration of CO and PM were different under different working conditions, CO with high concentration (C ≥ 44.74 ppm) and PM with high concentration (C ≥ 89.47 mg/m³) were mainly distributed in the area near the exhaust pipe of trackless rubber-tyred vehicle. Therefore, the drivers of trackless rubber-tyred vehicle and underground personnel need to comprehensively consider the risk factors under different working conditions when carrying out personal protection.

Underground emissions and miners' personal exposure to diesel and renewable diesel exhaust in a Swedish iron ore mine

Purpose

Underground diesel exhaust exposure is an occupational health risk. It is not known how recent intensified emission legislation and use of renewable fuels have reduced or altered occupational exposures. We characterized these effects on multipollutant personal exposure to diesel exhaust and underground ambient air concentrations in an underground iron ore mine.

Methods

Full-shift personal sampling (12 workers) of elemental carbon (EC), nitrogen dioxide (NO₂), polycyclic aromatic hydrocarbons (PAHs), and equivalent black carbon (eBC) was performed. The study used and validated eBC as an online proxy for occupational exposure to EC. Ambient air sampling of these pollutants and particle number size distribution and concentration were performed in the vicinity of the workers. Urine samples (27 workers) were collected after 8 h exposure and analyzed for PAH metabolites and effect biomarkers (8-oxodG for DNA oxidative damage, 4-HNE-MA for lipid peroxidation, 3-HPMA for acrolein).

Results

The personal exposures (geometric mean; GM) of the participating miners were 7 µg EC m⁻³ and 153 µg NO₂ m⁻³, which are below the EU occupational exposure limits. However, exposures up to 94 µg EC m⁻³ and 1200 µg NO₂ m⁻³ were observed. There was a tendency that the operators of vehicles complying with sharpened emission legislation had lower exposure of EC. eBC and NO₂ correlated with EC, R = 0.94 and R = 0.66, respectively. No correlation was found between EC and the sum of 16 priority PAHs (GM 1790 ng m⁻³). Ratios between personal exposures and ambient concentrations were similar and close to 1 for EC and NO₂, but significantly higher for PAHs. Semi-volatile PAHs may not be effectively reduced by the aftertreatment systems, and ambient area sampling did not predict the personal airborne PAHs exposure well, neither did the slightly elevated concentration of urinary PAH metabolites correlate with airborne PAH exposure.

Conclusion

Miners’ exposures to EC and NO₂ were lower than those in older studies indicating the effect of sharpened emission legislation and new technologies. Using modern vehicles with diesel particulate filter (DPF) may have contributed to the lower ambient underground PM concentration and exposures. The semi-volatile behavior of the PAHs might have led to inefficient removal in the engines aftertreatment systems and delayed removal by the workplace ventilation system due to partitioning to indoor surfaces. The results indicate that secondary emissions can be an important source of gaseous PAH exposure in the mine.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00420-022-01843-x.

On-road detection of trucks with high NOx emissions from a patrol vehicle with on-board FTIR analyzer

Technological advances in heavy-duty vehicle engines, allowing them to reach NO_x emissions comparable to European diesel passenger cars per km driven, are being compromised by aftermarket defeat devices such as selective catalytic reduction (SCR) emulators, many of which can be quickly deactivated by the driver. In a pilot study, the prevalence of trucks with excess NO_x emissions on Czech motorways was evaluated using an ordinary Customs Administration patrol vehicle temporarily fitted with a portable fast-response Fourier Transform Infra Red (FTIR) analyzer, acting as an impromptu chase vehicle. The Euro emissions category of the truck was provided from the motorway toll collection transponders. A total of 222 unique trucks were measured during a one-week pilot project. Of these, 66% were Euro VI, 25% were Euro V, and 9% were older categories. NO/CO₂ ratios were calculated as a ratio of numerical integrals of the peaks of measured concentrations, as a ratio of maximum measured concentrations, and by linear regression, with the regression approach yielding most realistic results and mean calculated error of 0.2 g/kWh NO. At assumed 85% NO in NO_x and 634 g/kWh mean CO₂ emissions, the mean emissions of the cleanest 83% of Euro V and cleanest 63% of Euro VI trucks were within the corresponding NO_x limit (2 g/kWh for Euro V, 0.46 g/kWh for Euro VI) multiplied by a factor of 1.5. Providing for some allowance for legitimate occurrences of high NO_x emissions, about 10-15% of Euro V and about 10-25% of Euro VI trucks are believed to be excess emitters, with no SCR functionality on about 10-15% of Euro VI trucks. The portable FTIR, temporarily mounted on a law enforcement vehicle, can be readily used as a screening tool, identifying vehicles to be stopped for additional inspection, but also during roadside emissions inspections.

Control Technology-Driven Changes to In-Use Heavy-Duty Diesel Truck Emissions of Nitrogenous Species and Related Environmental Impacts

Emissions from thousands of in-use heavy-duty diesel trucks were sampled at a highway and an arterial street location in the San Francisco Bay Area, spanning a time period when use of diesel particle filters (DPFs) and selective catalytic reduction (SCR) increased rapidly. At the highway site where a diverse mix of trucks is observed, SCR systems on 2010 and newer engines reduce emitted nitrogen oxides (NO_x) by 87 ± 5% relative to pre-2004 engines. SCR also mitigates DPF-related increases in nitrogen dioxide (NO₂) emissions. However, a majority of trucks had in-use NO_x emission rates that exceeded applicable emission standards. SCR systems increase emissions of nitrous oxide (N₂O) and ammonia (NH₃) from near-zero levels to 0.93 ± 0.13 and 0.18 ± 0.07 g kg^-1, respectively. Emissions of all nitrogenous species and especially NH₃ are skewed; 10% of trucks contribute 95% of the on-road fleet's total NH₃ emissions. Similar emission changes are observed at the arterial street site where exclusively drayage trucks operate. The environmental effects of decreased black carbon, NO_x, and carbon dioxide (CO₂) emissions and increased N₂O and NH₃ emissions due to the rapid adoption of DPF and SCR systems by the California truck fleet are: (1) a 65% net decrease in the social cost of statewide exposure to diesel truck emissions (-3.3 billion 2018 US dollars per year), and (2) a 3% net decrease in the global warming potential-weighted emission factor (-27 g CO₂-eq km^-1).